[PATCH 4/4] ARM: S3C64XX: Add s3c64xx support to touchscreen driver

Maurus Cuelenaere mcuelenaere at gmail.com
Mon Jan 25 04:45:19 EST 2010


Op 25-01-10 10:46, Arnaud Patard (Rtp) schreef:
> Maurus Cuelenaere<mcuelenaere at gmail.com>  writes:
>
> Hi,
>
>    
>> ARM: S3C64XX: Add s3c64xx support to touchscreen driver
>>
>> This ack's the extra interrupt s3c64xx platforms have in the touchscreen driver.
>>
>> Signed-off-by: Maurus Cuelenaere<mcuelenaere at gmail.com>
>> ---
>>   drivers/input/touchscreen/Kconfig      |    6 +++---
>>   drivers/input/touchscreen/s3c2410_ts.c |   28 ++++++++++++++++++++++++----
>>   2 files changed, 27 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/input/touchscreen/Kconfig
>> b/drivers/input/touchscreen/Kconfig
>> index dfafc76..0378b3d 100644
>> --- a/drivers/input/touchscreen/Kconfig
>> +++ b/drivers/input/touchscreen/Kconfig
>> @@ -146,11 +146,11 @@ config TOUCHSCREEN_FUJITSU
>>   	  module will be called fujitsu-ts.
>>
>>   config TOUCHSCREEN_S3C2410
>> -	tristate "Samsung S3C2410 touchscreen input driver"
>> -	depends on ARCH_S3C2410
>> +	tristate "Samsung S3C touchscreen input driver"
>> +	depends on ARCH_S3C2410 || ARCH_S3C64XX
>>   	select S3C24XX_ADC
>>   	help
>> -	  Say Y here if you have the s3c2410 touchscreen.
>> +	  Say Y here if you have the s3c touchscreen.
>>
>>   	  If unsure, say N.
>>
>> diff --git a/drivers/input/touchscreen/s3c2410_ts.c
>> b/drivers/input/touchscreen/s3c2410_ts.c
>> index 3debbc2..7dfbc38 100644
>> --- a/drivers/input/touchscreen/s3c2410_ts.c
>> +++ b/drivers/input/touchscreen/s3c2410_ts.c
>> @@ -40,7 +40,9 @@
>>   #include<plat/regs-adc.h>
>>   #include<plat/ts.h>
>>
>> +#ifdef PLAT_S3C24XX
>>   #include<mach/regs-gpio.h>
>> +#endif
>>
>>   #define TSC_SLEEP  (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
>>
>> @@ -88,6 +90,12 @@ struct s3c2410ts {
>>
>>   static struct s3c2410ts ts;
>>
>> +enum s3c_cpu_type {
>> +	TYPE_S3C2410,
>> +	TYPE_S3C2440,
>> +	TYPE_S3C64XX,
>> +};
>> +
>>   /**
>>    * s3c2410_ts_connect - configure gpio for s3c2410 systems
>>    *
>> @@ -95,6 +103,7 @@ static struct s3c2410ts ts;
>>    * connected to the device (later systems such as the S3C2440 integrate
>>    * these into the device).
>>   */
>> +#ifdef PLAT_S3C24XX
>>   static inline void s3c2410_ts_connect(void)
>>   {
>>   	s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
>> @@ -102,6 +111,7 @@ static inline void s3c2410_ts_connect(void)
>>   	s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
>>   	s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
>>   }
>> +#endif
>>      
> Please, remove all theses #ifdef. I don't see the point of them as it's
> only few lines of C code and they don't get executed when running on
> other platforms than 2410.
>
> Arnaud
>    

The problem is that s3c2410_gpio_cfgpin() and S3C2410_* isn't defined on 
S3C64XX builds so this gives implicit declaration errors.

Regards,
Maurus Cuelenaere



More information about the linux-arm-kernel mailing list