[PATCH] ep93xx: register the pwm devices on the edb93xx dev boards
Ryan Mallon
ryan at bluewatersys.com
Sun Jan 10 20:09:45 EST 2010
H Hartley Sweeten wrote:
> ep93xx: register the pwm devices on the edb93xx dev boards
>
> Add the platform init code to register the pwm devices that exist
> on the various edb93xx development boards.
>
> Signed-off-by: H Hartley Sweeten <hsweeten at visionengravers.com>
> Cc: Ryan Mallon <ryan at bluewatersys.com>
>
> ---
>
> diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
> index a4a7be3..cee7e91 100644
> --- a/arch/arm/mach-ep93xx/edb93xx.c
> +++ b/arch/arm/mach-ep93xx/edb93xx.c
> @@ -118,12 +118,33 @@ static void __init edb93xx_register_i2c(void)
> }
> }
>
> +
> +/*************************************************************************
> + * EDB93xx pwm
> + *************************************************************************/
> +static void __init edb93xx_register_pwm(void)
> +{
> + if (machine_is_edb9301() ||
> + machine_is_edb9302() || machine_is_edb9302a()) {
> + /* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
> + ep93xx_register_pwm(0, 1);
> + } if (machine_is_edb9307() || machine_is_edb9307a()) {
else if? Otherwise the else clause below will also occur on 9301, 9302
and 9302a and try to register the pwm's twice.
> + /* EP9307 only has pwm.0 (PWMOUT) */
> + ep93xx_register_pwm(1, 0);
> + } else {
> + /* EP9312 and EP9315 have both */
> + ep93xx_register_pwm(1, 1);
> + }
> +}
~Ryan
--
Bluewater Systems Ltd - ARM Technology Solution Centre
Ryan Mallon 5 Amuri Park, 404 Barbadoes St
ryan at bluewatersys.com PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com New Zealand
Phone: +64 3 3779127 Freecall: Australia 1800 148 751
Fax: +64 3 3779135 USA 1800 261 2934
More information about the linux-arm-kernel
mailing list