[PATCH] ARM: Fix the reset logic for ARM RealView boards
Colin Tuckley
colin.tuckley at arm.com
Wed Jan 6 09:54:27 EST 2010
Extend the patch from Philby John to the other "RealView" boards.
Rename the constants and offsets to reflect their actual functions.
Signed-off-by: Colin Tuckley <colin.tuckley at arm.com>
Cc: Philby John <pjohn at in.mvista.com>
Acked-by: Catalin Marinas <catalin.marinas at arm.com>
---
arch/arm/mach-realview/include/mach/board-pb1176.h | 4 ++--
arch/arm/mach-realview/include/mach/platform.h | 2 +-
arch/arm/mach-realview/realview_eb.c | 15 +++++++++++++++
arch/arm/mach-realview/realview_pb1176.c | 10 ++++------
arch/arm/mach-realview/realview_pb11mp.c | 11 +++++------
arch/arm/mach-realview/realview_pba8.c | 15 +++++++++++++++
arch/arm/mach-realview/realview_pbx.c | 15 +++++++++++++++
7 files changed, 57 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 34b80b7..2f5ccb2 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -74,8 +74,8 @@
#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */
/*
- * Control register SYS_RESETCTL is set to 1 to force a soft reset
+ * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
*/
-#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL 0x0100
+#define REALVIEW_PB1176_SYS_SOFT_RESET 0x0100
#endif /* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
index 4f46bf7..86c0c44 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -140,7 +140,7 @@
* SYS_CLD, SYS_BOOTCS
*/
#define REALVIEW_SYS_LOCK_LOCKED (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK 0xA05F /* Enable write access */
+#define REALVIEW_SYS_LOCK_VAL 0xA05F /* Enable write access */
/*
* REALVIEW_SYS_FLASH
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 917f8ca..7d857d3 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -381,6 +381,20 @@ static struct sys_timer realview_eb_timer = {
.init = realview_eb_timer_init,
};
+static void realview_eb_reset(char mode)
+{
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+ /*
+ * To reset, we hit the on-board reset register
+ * in the system FPGA
+ */
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ if (core_tile_eb11mp())
+ __raw_writel(0x0008, reset_ctrl);
+}
+
static void __init realview_eb_init(void)
{
int i;
@@ -408,6 +422,7 @@ static void __init realview_eb_init(void)
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
+ realview_reset = realview_eb_reset;
}
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 7fb726d..44392e5 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -292,12 +292,10 @@ static struct sys_timer realview_pb1176_timer = {
static void realview_pb1176_reset(char mode)
{
- void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_RESETCTL_OFFSET;
- void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_LOCK_OFFSET;
- __raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl);
- __raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ __raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
}
static void realview_pb1176_fixup(struct machine_desc *mdesc,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 9bbbfc0..3e02731 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -301,17 +301,16 @@ static struct sys_timer realview_pb11mp_timer = {
static void realview_pb11mp_reset(char mode)
{
- void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_RESETCTL_OFFSET;
- unsigned int val;
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
/*
* To reset, we hit the on-board reset register
* in the system FPGA
*/
- val = __raw_readl(hdr_ctrl);
- val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR;
- __raw_writel(val, hdr_ctrl);
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ __raw_writel(0x0000, reset_ctrl);
+ __raw_writel(0x0004, reset_ctrl);
}
static void __init realview_pb11mp_init(void)
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index fe861e9..fe4e25c 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -272,6 +272,20 @@ static struct sys_timer realview_pba8_timer = {
.init = realview_pba8_timer_init,
};
+static void realview_pba8_reset(char mode)
+{
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+ /*
+ * To reset, we hit the on-board reset register
+ * in the system FPGA
+ */
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ __raw_writel(0x0000, reset_ctrl);
+ __raw_writel(0x0004, reset_ctrl);
+}
+
static void __init realview_pba8_init(void)
{
int i;
@@ -291,6 +305,7 @@ static void __init realview_pba8_init(void)
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
+ realview_reset = realview_pba8_reset;
}
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index d0a3d0e..7469ce2 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -324,6 +324,20 @@ static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags,
#endif
}
+static void realview_pbx_reset(char mode)
+{
+ void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+ void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+ /*
+ * To reset, we hit the on-board reset register
+ * in the system FPGA
+ */
+ __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+ __raw_writel(0x0000, reset_ctrl);
+ __raw_writel(0x0004, reset_ctrl);
+}
+
static void __init realview_pbx_init(void)
{
int i;
@@ -358,6 +372,7 @@ static void __init realview_pbx_init(void)
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
+ realview_reset = realview_pbx_reset;
}
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
More information about the linux-arm-kernel
mailing list