[PATCH 0/3] OMAP4: Enable L2 cache

[Shilimkar, Santosh]

Tony,

Here is the rebased series against 2.6.33-rc5 which adds L2 cache support 
on OMAP4430. I have dropped the l2 errata patch from earlier post [1] in
this series since it will go through Russell's patch system. The link
for patches is [2]

The following changes since commit 92dcffb916d309aa01778bf8963a6932e4014d07:
  Linus Torvalds (1):
        Linux 2.6.33-rc5

Santosh Shilimkar (3):
      OMAP4: Add L2 Cache support
      OMAP4: Clean the secondary_data from L2
      OMAP4: Enable L2 Cache

 arch/arm/configs/omap_4430sdp_defconfig    |    2 +
 arch/arm/mach-omap2/board-4430sdp.c        |   33 ++++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap-smp.c             |    2 +
 arch/arm/mm/Kconfig                        |    2 +-
 arch/arm/plat-omap/include/plat/omap44xx.h |    1 +
 5 files changed, 39 insertions(+), 1 deletions(-)

Regards,
Santosh

[1]	http://www.mail-archive.com/linux-omap@vger.kernel.org/msg20553.html
[2]	http://www.spinics.net/lists/arm-kernel/msg81122.html