[S3C-CLK] ARM: S3C64XX: Compress s3c6400-clock.c code
Ben Dooks
ben-linux at fluff.org
Thu Jan 7 21:30:12 EST 2010
The individually named clocks are all static to the code
and thus can be compressed into a single array and then
the array can be referenced. This removes the need for
a seperate array of pointers to clocks.
Fix a minor problem of re-initialising the pointers in
s3c6400_set_clksrc() as this is also called by the cpufreq
code. Move these initialisations to the code that does the
registration.
Based on Harald Welte's original clock changes patch.
Signed-off-by: Ben Dooks <ben-linux at fluff.org>
---
arch/arm/plat-s3c64xx/s3c6400-clock.c | 334 +++++++++++++++------------------
1 files changed, 154 insertions(+), 180 deletions(-)
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index aba08c7..6fde910 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -255,7 +255,6 @@ static struct clk_sources clkset_uhost = {
.nr_sources = ARRAY_SIZE(clkset_uhost_list),
};
-
/* The peripheral clocks are all controlled via clocksource followed
* by an optional divider and gate stage. We currently roll this into
* one clock which hides the intermediate clock from the mux.
@@ -354,105 +353,7 @@ static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk,
return rate;
}
-static struct clksrc_clk clk_mmc0 = {
- .clk = {
- .name = "mmc_bus",
- .id = 0,
- .ctrlbit = S3C_CLKCON_SCLK_MMC0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_MMC0_SHIFT,
- .mask = S3C6400_CLKSRC_MMC0_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV1_MMC0_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_mmc1 = {
- .clk = {
- .name = "mmc_bus",
- .id = 1,
- .ctrlbit = S3C_CLKCON_SCLK_MMC1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_MMC1_SHIFT,
- .mask = S3C6400_CLKSRC_MMC1_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV1_MMC1_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_mmc2 = {
- .clk = {
- .name = "mmc_bus",
- .id = 2,
- .ctrlbit = S3C_CLKCON_SCLK_MMC2,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_MMC2_SHIFT,
- .mask = S3C6400_CLKSRC_MMC2_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV1_MMC2_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_usbhost = {
- .clk = {
- .name = "usb-bus-host",
- .id = -1,
- .ctrlbit = S3C_CLKCON_SCLK_UHOST,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_UHOST_SHIFT,
- .mask = S3C6400_CLKSRC_UHOST_MASK,
- .sources = &clkset_uhost,
- .divider_shift = S3C6400_CLKDIV1_UHOST_SHIFT,
- .reg_divider = S3C_CLK_DIV1,
-};
-
-static struct clksrc_clk clk_uart_uclk1 = {
- .clk = {
- .name = "uclk1",
- .id = -1,
- .ctrlbit = S3C_CLKCON_SCLK_UART,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_UART_SHIFT,
- .mask = S3C6400_CLKSRC_UART_MASK,
- .sources = &clkset_uart,
- .divider_shift = S3C6400_CLKDIV2_UART_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
-/* Where does UCLK0 come from? */
-
-static struct clksrc_clk clk_spi0 = {
- .clk = {
- .name = "spi-bus",
- .id = 0,
- .ctrlbit = S3C_CLKCON_SCLK_SPI0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_SPI0_SHIFT,
- .mask = S3C6400_CLKSRC_SPI0_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV2_SPI0_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
-static struct clksrc_clk clk_spi1 = {
- .clk = {
- .name = "spi-bus",
- .id = 1,
- .ctrlbit = S3C_CLKCON_SCLK_SPI1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_SPI1_SHIFT,
- .mask = S3C6400_CLKSRC_SPI1_MASK,
- .sources = &clkset_spi_mmc,
- .divider_shift = S3C6400_CLKDIV2_SPI1_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
+/* clocks that feed other parts of the clock source tree */
static struct clk clk_iis_cd0 = {
.name = "iis_cdclk0",
@@ -482,20 +383,6 @@ static struct clk_sources clkset_audio0 = {
.nr_sources = ARRAY_SIZE(clkset_audio0_list),
};
-static struct clksrc_clk clk_audio0 = {
- .clk = {
- .name = "audio-bus",
- .id = 0,
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_AUDIO0_SHIFT,
- .mask = S3C6400_CLKSRC_AUDIO0_MASK,
- .sources = &clkset_audio0,
- .divider_shift = S3C6400_CLKDIV2_AUDIO0_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
static struct clk *clkset_audio1_list[] = {
[0] = &clk_mout_epll.clk,
[1] = &clk_dout_mpll,
@@ -509,34 +396,6 @@ static struct clk_sources clkset_audio1 = {
.nr_sources = ARRAY_SIZE(clkset_audio1_list),
};
-static struct clksrc_clk clk_audio1 = {
- .clk = {
- .name = "audio-bus",
- .id = 1,
- .ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_AUDIO1_SHIFT,
- .mask = S3C6400_CLKSRC_AUDIO1_MASK,
- .sources = &clkset_audio1,
- .divider_shift = S3C6400_CLKDIV2_AUDIO1_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
-static struct clksrc_clk clk_irda = {
- .clk = {
- .name = "irda-bus",
- .id = 0,
- .ctrlbit = S3C_CLKCON_SCLK_IRDA,
- .enable = s3c64xx_sclk_ctrl,
- },
- .shift = S3C6400_CLKSRC_IRDA_SHIFT,
- .mask = S3C6400_CLKSRC_IRDA_MASK,
- .sources = &clkset_irda,
- .divider_shift = S3C6400_CLKDIV2_IRDA_SHIFT,
- .reg_divider = S3C_CLK_DIV2,
-};
-
static struct clk *clkset_camif_list[] = {
&clk_h2,
};
@@ -546,18 +405,141 @@ static struct clk_sources clkset_camif = {
.nr_sources = ARRAY_SIZE(clkset_camif_list),
};
-static struct clksrc_clk clk_camif = {
- .clk = {
- .name = "camera",
- .id = -1,
- .ctrlbit = S3C_CLKCON_SCLK_CAM,
- .enable = s3c64xx_sclk_ctrl,
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 0,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_MMC0_SHIFT,
+ .mask = S3C6400_CLKSRC_MMC0_MASK,
+ .sources = &clkset_spi_mmc,
+ .divider_shift = S3C6400_CLKDIV1_MMC0_SHIFT,
+ .reg_divider = S3C_CLK_DIV1,
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 1,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_MMC1_SHIFT,
+ .mask = S3C6400_CLKSRC_MMC1_MASK,
+ .sources = &clkset_spi_mmc,
+ .divider_shift = S3C6400_CLKDIV1_MMC1_SHIFT,
+ .reg_divider = S3C_CLK_DIV1,
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 2,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC2,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_MMC2_SHIFT,
+ .mask = S3C6400_CLKSRC_MMC2_MASK,
+ .sources = &clkset_spi_mmc,
+ .divider_shift = S3C6400_CLKDIV1_MMC2_SHIFT,
+ .reg_divider = S3C_CLK_DIV1,
+ }, {
+ .clk = {
+ .name = "usb-bus-host",
+ .id = -1,
+ .ctrlbit = S3C_CLKCON_SCLK_UHOST,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_UHOST_SHIFT,
+ .mask = S3C6400_CLKSRC_UHOST_MASK,
+ .sources = &clkset_uhost,
+ .divider_shift = S3C6400_CLKDIV1_UHOST_SHIFT,
+ .reg_divider = S3C_CLK_DIV1,
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .id = -1,
+ .ctrlbit = S3C_CLKCON_SCLK_UART,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_UART_SHIFT,
+ .mask = S3C6400_CLKSRC_UART_MASK,
+ .sources = &clkset_uart,
+ .divider_shift = S3C6400_CLKDIV2_UART_SHIFT,
+ .reg_divider = S3C_CLK_DIV2,
+ }, {
+/* Where does UCLK0 come from? */
+ .clk = {
+ .name = "spi-bus",
+ .id = 0,
+ .ctrlbit = S3C_CLKCON_SCLK_SPI0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_SPI0_SHIFT,
+ .mask = S3C6400_CLKSRC_SPI0_MASK,
+ .sources = &clkset_spi_mmc,
+ .divider_shift = S3C6400_CLKDIV2_SPI0_SHIFT,
+ .reg_divider = S3C_CLK_DIV2,
+ }, {
+ .clk = {
+ .name = "spi-bus",
+ .id = 1,
+ .ctrlbit = S3C_CLKCON_SCLK_SPI1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_SPI1_SHIFT,
+ .mask = S3C6400_CLKSRC_SPI1_MASK,
+ .sources = &clkset_spi_mmc,
+ .divider_shift = S3C6400_CLKDIV2_SPI1_SHIFT,
+ .reg_divider = S3C_CLK_DIV2,
+ }, {
+ .clk = {
+ .name = "audio-bus",
+ .id = 0,
+ .ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_AUDIO0_SHIFT,
+ .mask = S3C6400_CLKSRC_AUDIO0_MASK,
+ .sources = &clkset_audio0,
+ .divider_shift = S3C6400_CLKDIV2_AUDIO0_SHIFT,
+ .reg_divider = S3C_CLK_DIV2,
+ }, {
+ .clk = {
+ .name = "audio-bus",
+ .id = 1,
+ .ctrlbit = S3C_CLKCON_SCLK_AUDIO1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_AUDIO1_SHIFT,
+ .mask = S3C6400_CLKSRC_AUDIO1_MASK,
+ .sources = &clkset_audio1,
+ .divider_shift = S3C6400_CLKDIV2_AUDIO1_SHIFT,
+ .reg_divider = S3C_CLK_DIV2,
+ }, {
+ .clk = {
+ .name = "irda-bus",
+ .id = 0,
+ .ctrlbit = S3C_CLKCON_SCLK_IRDA,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = S3C6400_CLKSRC_IRDA_SHIFT,
+ .mask = S3C6400_CLKSRC_IRDA_MASK,
+ .sources = &clkset_irda,
+ .divider_shift = S3C6400_CLKDIV2_IRDA_SHIFT,
+ .reg_divider = S3C_CLK_DIV2,
+ }, {
+ .clk = {
+ .name = "camera",
+ .id = -1,
+ .ctrlbit = S3C_CLKCON_SCLK_CAM,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .shift = 0,
+ .mask = 0,
+ .sources = &clkset_camif,
+ .divider_shift = S3C6400_CLKDIV0_CAM_SHIFT,
+ .reg_divider = S3C_CLK_DIV0,
},
- .shift = 0,
- .mask = 0,
- .sources = &clkset_camif,
- .divider_shift = S3C6400_CLKDIV0_CAM_SHIFT,
- .reg_divider = S3C_CLK_DIV0,
};
/* Clock initialisation code */
@@ -566,17 +548,6 @@ static struct clksrc_clk *init_parents[] = {
&clk_mout_apll,
&clk_mout_epll,
&clk_mout_mpll,
- &clk_mmc0,
- &clk_mmc1,
- &clk_mmc2,
- &clk_usbhost,
- &clk_uart_uclk1,
- &clk_spi0,
- &clk_spi1,
- &clk_audio0,
- &clk_audio1,
- &clk_irda,
- &clk_camif,
};
static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
@@ -593,11 +564,6 @@ static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
return;
}
- clk->clk.get_rate = s3c64xx_getrate_clksrc;
- clk->clk.set_rate = s3c64xx_setrate_clksrc;
- clk->clk.set_parent = s3c64xx_setparent_clksrc;
- clk->clk.round_rate = s3c64xx_roundrate_clksrc;
-
clk->clk.parent = srcs->sources[clksrc];
printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
@@ -664,6 +630,9 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
s3c6400_set_clksrc(init_parents[ptr]);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c6400_set_clksrc(&clksrcs[ptr]);
}
static struct clk *clks[] __initdata = {
@@ -674,17 +643,6 @@ static struct clk *clks[] __initdata = {
&clk_mout_epll.clk,
&clk_mout_mpll.clk,
&clk_dout_mpll,
- &clk_mmc0.clk,
- &clk_mmc1.clk,
- &clk_mmc2.clk,
- &clk_usbhost.clk,
- &clk_uart_uclk1.clk,
- &clk_spi0.clk,
- &clk_spi1.clk,
- &clk_audio0.clk,
- &clk_audio1.clk,
- &clk_irda.clk,
- &clk_camif.clk,
&clk_arm,
};
@@ -716,4 +674,20 @@ void __init s3c6400_register_clocks(unsigned armclk_divlimit)
clkp->name, ret);
}
}
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) {
+ clkp = &clksrcs[ptr].clk;
+
+ /* all clksrc clocks have these */
+ clkp->get_rate = s3c64xx_getrate_clksrc;
+ clkp->set_rate = s3c64xx_setrate_clksrc;
+ clkp->set_parent = s3c64xx_setparent_clksrc;
+ clkp->round_rate = s3c64xx_roundrate_clksrc;
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
}
--
1.6.0.4
More information about the linux-arm-kernel
mailing list