S3C2440 : DM9000 link down when writing on NAND flash

[Lothar Waßmann]

Hi,

> I'm using a DM9000E with a S3C2440 CPU running 2.6.30.1. The DM9K is
> connected on the CS4 (like the mini2440). I already had troubles with
> the ethernet, and we applied (as suggested here) the DM900 errata
> consisting in gating IOR & CS. The DM9000 is working better now, but
> when I write some file on the NAND Flash, the DM900 is reseting (link
> down, link up). Reading from NAND flash is fine.
> 
I remember to have seen this before. You should search the archives of
the old linux-arm-kernel mailinglist.


Lothar Waßmann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________