[PATCH] mmp2: add mfpr setting

[Haojian Zhuang]

Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>
---
 arch/arm/mach-mmp/include/mach/mfp-mmp2.h |    4 ++++
 arch/arm/mach-mmp/mmp2.c                  |    7 +++++++
 2 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
index 9371510..9f9f814 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
@@ -231,6 +231,10 @@
 /* Codec*/
 #define GPIO23_GPIO23		MFP_CFG(GPIO23, AF0)

+#define GPIO101_GPIO101		MFP_CFG(GPIO101, AF0)
+
+/* PMIC */
+#define PMIC_PMIC_INT		MFP_CFG(PMIC_INT, AF0)

 #endif /* __ASM_MACH_MFP_MMP2_H */

diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index a9ca93d..561194d 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -28,6 +28,12 @@

 #define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)

+static struct mfp_addr_map mmp2_addr_map[] __initdata = {
+	MFP_ADDR(PMIC_INT, 0x2c4),
+
+	MFP_ADDR_END,
+};
+
 /* APB peripheral clocks */
 static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
 static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
@@ -61,6 +67,7 @@ static int __init mmp2_init(void)
 {
 	if (cpu_is_mmp2()) {
 		mfp_init_base(MFPR_VIRT_BASE);
+		mfp_init_addr(mmp2_addr_map);
 		clks_register(ARRAY_AND_SIZE(mmp2_clkregs));
 	}

-- 
1.5.6.5