[PATCH v3 9/9 RE-SEND] ARM: S5PV210: Add serial port support
Ben Dooks
ben-linux at fluff.org
Thu Jan 21 20:37:28 EST 2010
On Fri, Jan 22, 2010 at 10:05:05AM +0900, Thomas Abraham wrote:
> This patch adds UART serial port support for S5PV210.
interesting, this now says it is directly from thomas.
can you send it with the From: in the SMTP headers as kgene.kim and make
the first real line of the patch 'From: Thomas Abraham <thomas.ab at samsung.com>'
so it matches the signed-off-by chain.
> Signed-off-by: Thomas Abraham <thomas.ab at samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
> ---
> arch/arm/plat-s3c/include/plat/regs-serial.h | 30 +++++
> drivers/serial/Kconfig | 9 ++-
> drivers/serial/Makefile | 1 +
> drivers/serial/s5pv210.c | 154 ++++++++++++++++++++++++++
> 4 files changed, 193 insertions(+), 1 deletions(-)
> create mode 100644 drivers/serial/s5pv210.c
>
> diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
> index 85d8904..60d6604 100644
> --- a/arch/arm/plat-s3c/include/plat/regs-serial.h
> +++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
> @@ -194,6 +194,36 @@
> #define S3C64XX_UINTSP 0x34
> #define S3C64XX_UINTM 0x38
>
> +/* Following are specific to S5PV210 and S5P6442 */
> +#define S5PV210_UCON_CLKMASK (1<<10)
> +#define S5PV210_UCON_PCLK (0<<10)
> +#define S5PV210_UCON_UCLK (1<<10)
> +
> +#define S5PV210_UFCON_TXTRIG0 (0<<8)
> +#define S5PV210_UFCON_TXTRIG4 (1<<8)
> +#define S5PV210_UFCON_TXTRIG8 (2<<8)
> +#define S5PV210_UFCON_TXTRIG16 (3<<8)
> +#define S5PV210_UFCON_TXTRIG32 (4<<8)
> +#define S5PV210_UFCON_TXTRIG64 (5<<8)
> +#define S5PV210_UFCON_TXTRIG128 (6<<8)
> +#define S5PV210_UFCON_TXTRIG256 (7<<8)
> +
> +#define S5PV210_UFCON_RXTRIG1 (0<<4)
> +#define S5PV210_UFCON_RXTRIG4 (1<<4)
> +#define S5PV210_UFCON_RXTRIG8 (2<<4)
> +#define S5PV210_UFCON_RXTRIG16 (3<<4)
> +#define S5PV210_UFCON_RXTRIG32 (4<<4)
> +#define S5PV210_UFCON_RXTRIG64 (5<<4)
> +#define S5PV210_UFCON_RXTRIG128 (6<<4)
> +#define S5PV210_UFCON_RXTRIG256 (7<<4)
> +
> +#define S5PV210_UFSTAT_TXFULL (1<<24)
> +#define S5PV210_UFSTAT_RXFULL (1<<8)
> +#define S5PV210_UFSTAT_TXMASK (255<<16)
> +#define S5PV210_UFSTAT_TXSHIFT (16)
> +#define S5PV210_UFSTAT_RXMASK (255<<0)
> +#define S5PV210_UFSTAT_RXSHIFT (0)
> +
> #ifndef __ASSEMBLY__
>
> /* struct s3c24xx_uart_clksrc
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index d7d687f..ebdd2b9 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -459,7 +459,7 @@ config SERIAL_SAMSUNG_UARTS
> int
> depends on ARM && PLAT_S3C
> default 2 if ARCH_S3C2400
> - default 4 if ARCH_S5P6440 || ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
> + default 4 if ARCH_S5P6440 || ARCH_S5PC1XX || ARCH_S5PV210 || ARCH_S3C64XX || CPU_S3C2443
> default 3
> help
> Select the number of available UART ports for the Samsung S3C
> @@ -540,6 +540,13 @@ config SERIAL_S5PC100
> help
> Serial port support for the Samsung S5PC100 SoCs
>
> +config SERIAL_S5PV210
> + tristate "Samsung S5PV210 Serial port support"
> + depends on SERIAL_SAMSUNG && CPU_S5PV210
> + default y
> + help
> + Serial port support for Samsung's S5P Family of SoC's
> +
> config SERIAL_MAX3100
> tristate "MAX3100 support"
> depends on SPI
> diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> index 5548fe7..6aa4723 100644
> --- a/drivers/serial/Makefile
> +++ b/drivers/serial/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
> obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
> obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
> obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
> +obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
> obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
> obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
> obj-$(CONFIG_SERIAL_MUX) += mux.o
> diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c
> new file mode 100644
> index 0000000..8dc0383
> --- /dev/null
> +++ b/drivers/serial/s5pv210.c
> @@ -0,0 +1,154 @@
> +/* linux/drivers/serial/s5pv210.c
> + *
> + * Copyright (c) 2010 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com/
> + *
> + * Based on drivers/serial/s3c6400.c
> + *
> + * Driver for Samsung S5PV210 SoC UARTs.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/module.h>
> +#include <linux/ioport.h>
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +#include <linux/init.h>
> +#include <linux/serial_core.h>
> +#include <linux/serial.h>
> +
> +#include <asm/irq.h>
> +#include <mach/hardware.h>
> +#include <plat/regs-serial.h>
> +#include "samsung.h"
> +
> +static int s5pv210_serial_setsource(struct uart_port *port,
> + struct s3c24xx_uart_clksrc *clk)
> +{
> + unsigned long ucon = rd_regl(port, S3C2410_UCON);
> +
> + if (strcmp(clk->name, "pclk") == 0)
> + ucon &= ~S5PV210_UCON_CLKMASK;
> + else if (strcmp(clk->name, "uclk1") == 0)
> + ucon |= S5PV210_UCON_CLKMASK;
> + else {
> + printk(KERN_ERR "unknown clock source %s\n", clk->name);
> + return -EINVAL;
> + }
> +
> + wr_regl(port, S3C2410_UCON, ucon);
> + return 0;
> +}
> +
> +
> +static int s5pv210_serial_getsource(struct uart_port *port,
> + struct s3c24xx_uart_clksrc *clk)
> +{
> + u32 ucon = rd_regl(port, S3C2410_UCON);
> +
> + clk->divisor = 1;
> +
> + switch (ucon & S5PV210_UCON_CLKMASK) {
> + case S5PV210_UCON_PCLK:
> + clk->name = "pclk";
> + break;
> + case S5PV210_UCON_UCLK:
> + clk->name = "uclk1";
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static int s5pv210_serial_resetport(struct uart_port *port,
> + struct s3c2410_uartcfg *cfg)
> +{
> + unsigned long ucon = rd_regl(port, S3C2410_UCON);
> +
> + ucon &= S5PV210_UCON_CLKMASK;
> + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
> + wr_regl(port, S3C2410_ULCON, cfg->ulcon);
> +
> + /* reset both fifos */
> + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
> + wr_regl(port, S3C2410_UFCON, cfg->ufcon);
> +
> + return 0;
> +}
> +
> +#define S5PV210_UART_DEFAULT_INFO(fifo_size) \
> + .name = "Samsung S5PV210 UART0", \
> + .type = PORT_S3C6400, \
> + .fifosize = fifo_size, \
> + .has_divslot = 1, \
> + .rx_fifomask = S5PV210_UFSTAT_RXMASK, \
> + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \
> + .rx_fifofull = S5PV210_UFSTAT_RXFULL, \
> + .tx_fifofull = S5PV210_UFSTAT_TXFULL, \
> + .tx_fifomask = S5PV210_UFSTAT_TXMASK, \
> + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \
> + .get_clksrc = s5pv210_serial_getsource, \
> + .set_clksrc = s5pv210_serial_setsource, \
> + .reset_port = s5pv210_serial_resetport
> +
> +static struct s3c24xx_uart_info s5p_port_fifo256 = {
> + S5PV210_UART_DEFAULT_INFO(256),
> +};
> +
> +static struct s3c24xx_uart_info s5p_port_fifo64 = {
> + S5PV210_UART_DEFAULT_INFO(64),
> +};
> +
> +static struct s3c24xx_uart_info s5p_port_fifo16 = {
> + S5PV210_UART_DEFAULT_INFO(16),
> +};
> +
> +static struct s3c24xx_uart_info *s5p_uart_inf[] = {
> + [0] = &s5p_port_fifo256,
> + [1] = &s5p_port_fifo64,
> + [2] = &s5p_port_fifo16,
> + [3] = &s5p_port_fifo16,
> +};
> +
> +/* device management */
> +static int s5p_serial_probe(struct platform_device *pdev)
> +{
> + return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
> +}
> +
> +static struct platform_driver s5p_serial_drv = {
> + .probe = s5p_serial_probe,
> + .remove = __devexit_p(s3c24xx_serial_remove),
> + .driver = {
> + .name = "s5pv210-uart",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init s5pv210_serial_console_init(void)
> +{
> + return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf);
> +}
> +
> +console_initcall(s5pv210_serial_console_init);
> +
> +static int __init s5p_serial_init(void)
> +{
> + return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf);
> +}
> +
> +static void __exit s5p_serial_exit(void)
> +{
> + platform_driver_unregister(&s5p_serial_drv);
> +}
> +
> +module_init(s5p_serial_init);
> +module_exit(s5p_serial_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:s5pv210-uart");
> +MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support");
> +MODULE_AUTHOR("Thomas Abraham <thomas.ab at samsung.com>");
> --
> 1.6.2.5
>
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
More information about the linux-arm-kernel
mailing list