[PATCH 01/35] davinci: da8xx/omapl1: add support for the second sysconfig module
Kevin Hilman
khilman at deeprootsystems.com
Wed Jan 6 13:31:43 EST 2010
From: Sekhar Nori <nsekhar at ti.com>
OMAP-L138 adds a second SYSCFG region having useful functionality
like deep sleep, pull up/down control and SATA clock stop.
This patch makes provision for accessing registers from second
SYSCFG region in da8xx code.
Note that OMAP-L137 has a single SYSCFG region.
Signed-off-by: Sekhar Nori <nsekhar at ti.com>
Signed-off-by: Kevin Hilman <khilman at deeprootsystems.com>
---
arch/arm/mach-davinci/board-da830-evm.c | 4 ++--
arch/arm/mach-davinci/board-da850-evm.c | 2 +-
arch/arm/mach-davinci/da830.c | 8 ++++----
arch/arm/mach-davinci/da850.c | 20 ++++++++++++--------
arch/arm/mach-davinci/devices-da8xx.c | 3 ++-
arch/arm/mach-davinci/include/mach/da8xx.h | 10 +++++++---
6 files changed, 28 insertions(+), 19 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 31dc990..dc19870 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -112,7 +112,7 @@ static __init void da830_evm_usb_init(void)
* Set up USB clock/mode in the CFGCHIP2 register.
* FYI: CFGCHIP2 is 0x0000ef00 initially.
*/
- cfgchip2 = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+ cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
/* USB2.0 PHY reference clock is 24 MHz */
cfgchip2 &= ~CFGCHIP2_REFFREQ;
@@ -139,7 +139,7 @@ static __init void da830_evm_usb_init(void)
cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN;
#endif
- __raw_writel(cfgchip2, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+ __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
/* USB_REFCLKIN is not used. */
ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 07de8db..dba2241 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -537,7 +537,7 @@ static int __init da850_evm_config_emac(void)
if (!machine_is_davinci_da850_evm())
return 0;
- cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG);
+ cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
val = __raw_readl(cfg_chip3_base);
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index b22b5cf..5479605 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -1208,13 +1208,13 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
void __init da830_init(void)
{
- da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
- if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
+ da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
+ if (WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module"))
return;
davinci_soc_info_da830.jtag_id_base =
- DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
- davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+ DA8XX_SYSCFG0_VIRT(DA8XX_JTAG_ID_REG);
+ davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG0_VIRT(0x120);
davinci_common_init(&davinci_soc_info_da830);
}
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 717806c..4f84ab4 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -838,12 +838,12 @@ static void da850_set_async3_src(int pllnum)
}
}
- v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+ v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
if (pllnum)
v |= CFGCHIP3_ASYNC3_CLKSRC;
else
v &= ~CFGCHIP3_ASYNC3_CLKSRC;
- __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+ __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
}
#ifdef CONFIG_CPU_FREQ
@@ -996,9 +996,9 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index)
postdiv = opp->postdiv;
/* Unlock writing to PLL registers */
- v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
+ v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG));
v &= ~CFGCHIP0_PLL_MASTER_LOCK;
- __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
+ __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG));
ret = davinci_set_pllrate(pll, prediv, mult, postdiv);
if (WARN_ON(ret))
@@ -1053,13 +1053,17 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
void __init da850_init(void)
{
- da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
- if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
+ da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
+ if (WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module"))
+ return;
+
+ da8xx_syscfg1_base = ioremap(DA8XX_SYSCFG1_BASE, SZ_4K);
+ if (WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module"))
return;
davinci_soc_info_da850.jtag_id_base =
- DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
- davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+ DA8XX_SYSCFG0_VIRT(DA8XX_JTAG_ID_REG);
+ davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG0_VIRT(0x120);
davinci_common_init(&davinci_soc_info_da850);
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index dd2d32c..8de5f9f 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -42,7 +42,8 @@
#define DA8XX_MDIO_REG_OFFSET 0x4000
#define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K
-void __iomem *da8xx_syscfg_base;
+void __iomem *da8xx_syscfg0_base;
+void __iomem *da8xx_syscfg1_base;
static struct plat_serial8250_port da8xx_serial_pdata[] = {
{
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 9070491..bddc4d4 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -21,7 +21,8 @@
#include <mach/mmc.h>
#include <mach/usb.h>
-extern void __iomem *da8xx_syscfg_base;
+extern void __iomem *da8xx_syscfg0_base;
+extern void __iomem *da8xx_syscfg1_base;
/*
* The cp_intc interrupt controller for the da8xx isn't in the same
@@ -34,13 +35,16 @@ extern void __iomem *da8xx_syscfg_base;
#define DA8XX_CP_INTC_SIZE SZ_8K
#define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
-#define DA8XX_SYSCFG_BASE (IO_PHYS + 0x14000)
-#define DA8XX_SYSCFG_VIRT(x) (da8xx_syscfg_base + (x))
+#define DA8XX_SYSCFG0_BASE (IO_PHYS + 0x14000)
+#define DA8XX_SYSCFG0_VIRT(x) (da8xx_syscfg0_base + (x))
#define DA8XX_JTAG_ID_REG 0x18
#define DA8XX_CFGCHIP0_REG 0x17c
#define DA8XX_CFGCHIP2_REG 0x184
#define DA8XX_CFGCHIP3_REG 0x188
+#define DA8XX_SYSCFG1_BASE (IO_PHYS + 0x22C000)
+#define DA8XX_SYSCFG1_VIRT(x) (da8xx_syscfg1_base + (x))
+
#define DA8XX_PSC0_BASE 0x01c10000
#define DA8XX_PLL0_BASE 0x01c11000
#define DA8XX_TIMER64P0_BASE 0x01c20000
--
1.6.6.rc2.1.g42108
More information about the linux-arm-kernel
mailing list