[PATCH 1/3] mx31ads: Convert 1133-EV1 to use dev_name to specify consumer devices

[Mark Brown]

This means we don't need to go running round working out struct
devices at runtime.

Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
---
 arch/arm/mach-mx3/mx31ads.c |   14 ++------------
 1 files changed, 2 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 0497c15..cda570b 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -307,12 +307,8 @@ static struct regulator_init_data ldo1_data = {
 };
 
 static struct regulator_consumer_supply ldo2_consumers[] = {
-	{
-		.supply = "AVDD",
-	},
-	{
-		.supply = "HPVDD",
-	},
+	{ .supply = "AVDD", .dev_name = "1-001a" },
+	{ .supply = "HPVDD", .dev_name = "1-001a" },
 };
 
 /* CODEC and SIM */
@@ -382,8 +378,6 @@ static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
 
 static int mx31_wm8350_init(struct wm8350 *wm8350)
 {
-	int i;
-
 	wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
 			   WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
 			   WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
@@ -419,10 +413,6 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
 			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
 			   WM8350_GPIO_DEBOUNCE_OFF);
 
-	/* Fix up for our own supplies. */
-	for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++)
-		ldo2_consumers[i].dev = wm8350->dev;
-
 	wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
 	wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
 	wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
-- 
1.6.5.7