[PATCH] arch/arm: Remove unnecessary semicolons

[Joe Perches]

Signed-off-by: Joe Perches <joe at perches.com>
---
 arch/arm/mach-at91/at91cap9_devices.c    |    2 +-
 arch/arm/mach-at91/at91sam9g45_devices.c |    2 +-
 arch/arm/mach-at91/at91sam9rl_devices.c  |    2 +-
 arch/arm/mach-w90x900/cpu.c              |    2 +-
 arch/arm/plat-mxc/irq.c                  |    2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index d1f775e..308ce7a 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -171,7 +171,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
 	 */
 	usba_udc_data.pdata.vbus_pin = -EINVAL;
 	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
 
 	if (data && data->vbus_pin > 0) {
 		at91_set_gpio_input(data->vbus_pin, 0);
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 809114d..b27ef60 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -254,7 +254,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
 {
 	usba_udc_data.pdata.vbus_pin = -EINVAL;
 	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
 
 	if (data && data->vbus_pin > 0) {
 		at91_set_gpio_input(data->vbus_pin, 0);
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 53aaa94..c49262b 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -145,7 +145,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
 	 */
 	usba_udc_data.pdata.vbus_pin = -EINVAL;
 	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
 
 	if (data && data->vbus_pin > 0) {
 		at91_set_gpio_input(data->vbus_pin, 0);
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 20dc0c9..4d51d5b 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -59,7 +59,7 @@ static DEFINE_CLK(emc, 7);
 static DEFINE_SUBCLK(rmii, 2);
 static DEFINE_CLK(usbd, 8);
 static DEFINE_CLK(usbh, 9);
-static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(g2d, 10);
 static DEFINE_CLK(pwm, 18);
 static DEFINE_CLK(ps2, 24);
 static DEFINE_CLK(kpi, 25);
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 778ddfe..e74f32a 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -53,7 +53,7 @@ int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 	unsigned int mask = 0x0F << irq % 8 * 4;
 
 	if (irq >= MXC_INTERNAL_IRQS)
-		return -EINVAL;;
+		return -EINVAL;
 
 	temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
 	temp &= ~mask;