[PATCH] mach-orion5x: D-link DNS-323 rev. B1 power-off

[Nicolas Pitre]

On Sun, 24 Jan 2010, Erik Benada wrote:

> ----- Original Message ----
> 
> > From: Nicolas Pitre <nico at fluxnic.net>
> > To: Erik Benada <erikbenada at yahoo.ca>
> > Cc: linux-arm-kernel at lists.infradead.org; Laurie Bradshaw <bradshaw.laurie at googlemail.com>; Martin Michlmayr <tbm at cyrius.com>
> > Sent: Sun, January 24, 2010 9:54:01 PM
> > Subject: Re: [PATCH] mach-orion5x: D-link DNS-323 rev. B1 power-off
> > 
> > On Sun, 24 Jan 2010, Erik Benada wrote:
> > 
> > > This patch fixes power LED blinking and power-off on DNS-323 rev. B1.
> > > 
> > > GPIO pin 3 has to be set to 1 to stop power LED blinking and to allow the LED 
> > to be controlled via leds-gpio. This pin has to be also set to 1 for power-off 
> > to work.
> > > To power-off the rev. B1 machine, pin 8 has to be set to 1 and then set to 0 
> > to do actual power-off.
> > > 
> > > Tested on my DNS-323 rev. B1
> > > 
> > > Signed-off-by: Erik Benada 
> > 
> > What is this patch based on?  I get only rejects when trying to apply it.
> > 
> > 
> > Nicolas
> 
> 
> It's based on latest Linus's tree. Maybe Yahoo messed up in-line code... Have you tried the attachment?

OK the attachment was fine.


Nicolas