[PATCH 12/13] ARM: LPC32XX: architecture header files
wellsk40 at gmail.com
wellsk40 at gmail.com
Wed Jan 27 20:43:30 EST 2010
From: Kevin Wells <wellsk40 at gmail.com>
Header files used for the LCP32XX arch and support platforms
Signed-off-by: Kevin Wells <wellsk40 at gmail.com>
---
arch/arm/mach-lpc32xx/include/mach/board.h | 27 +
arch/arm/mach-lpc32xx/include/mach/clkdev.h | 29 +
arch/arm/mach-lpc32xx/include/mach/gpio.h | 78 +++
arch/arm/mach-lpc32xx/include/mach/hardware.h | 41 ++
arch/arm/mach-lpc32xx/include/mach/i2c.h | 63 ++
arch/arm/mach-lpc32xx/include/mach/io.h | 31 +
arch/arm/mach-lpc32xx/include/mach/irqs.h | 118 ++++
arch/arm/mach-lpc32xx/include/mach/memory.h | 32 +
arch/arm/mach-lpc32xx/include/mach/platform.h | 735 +++++++++++++++++++++++
arch/arm/mach-lpc32xx/include/mach/system.h | 56 ++
arch/arm/mach-lpc32xx/include/mach/timex.h | 33 +
arch/arm/mach-lpc32xx/include/mach/uncompress.h | 114 ++++
arch/arm/mach-lpc32xx/include/mach/vmalloc.h | 28 +
13 files changed, 1385 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-lpc32xx/include/mach/board.h b/arch/arm/mach-lpc32xx/include/mach/board.h
new file mode 100644
index 0000000..057774a
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/board.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/board.h
+ *
+ * Author: Kevin Wells <kevin.wells at nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/clkdev.h b/arch/arm/mach-lpc32xx/include/mach/clkdev.h
new file mode 100644
index 0000000..3dd9d0d
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/clkdev.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/clkdev.h
+ *
+ * Author: Kevin Wells <kevin.wells at nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_CLKDEV_H
+#define __ASM_ARCH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h
new file mode 100644
index 0000000..8df2198
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/gpio.h
+ *
+ * Author: Kevin Wells <kevin.wells at nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * Note!
+ * Muxed GP pins need to be setup to the GP state in the board level
+ * code prior to using this driver.
+ * GPI pins : 28xP3 group
+ * GPO pins : 24xP3 group
+ * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
+ */
+
+#define GPIO_P0_MAX 8
+#define GPIO_P1_MAX 24
+#define GPIO_P2_MAX 13
+#define GPIO_P3_MAX 6
+#define GPI_P3_MAX 28
+#define GPO_P3_MAX 24
+
+#define GPIO_P0_GRP 0
+#define GPIO_P1_GRP (GPIO_P0_GRP + GPIO_P0_MAX)
+#define GPIO_P2_GRP (GPIO_P1_GRP + GPIO_P1_MAX)
+#define GPIO_P3_GRP (GPIO_P2_GRP + GPIO_P2_MAX)
+#define GPI_P3_GRP (GPIO_P3_GRP + GPIO_P3_MAX)
+#define GPO_P3_GRP (GPI_P3_GRP + GPI_P3_MAX)
+
+/*
+ * A specific GPIO can be selected with this macro
+ * ie, GPIO_05 can be selected with LPC32XX_GPIO(GPIO_P3_GRP, 5)
+ * See the LPC32x0 User's guide for GPIO group numbers
+ */
+#define LPC32XX_GPIO(x, y) ((x) + (y))
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return __gpio_to_irq(gpio);
+}
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/hardware.h b/arch/arm/mach-lpc32xx/include/mach/hardware.h
new file mode 100644
index 0000000..3f4bffa
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/hardware.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc. <source at mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/*
+ * Start of virtual addresses for IO devices
+ */
+#define IO_BASE 0xF0000000
+
+#define io_p2v(x) (IO_BASE | (((x) & 0xff000000) >> 4) |\
+ ((x) & 0x000fffff))
+#define io_v2p(x) ((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
+
+/*
+ * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
+ */
+#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
+ IO_BASE)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/i2c.h b/arch/arm/mach-lpc32xx/include/mach/i2c.h
new file mode 100644
index 0000000..a2d810b
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/i2c.h
@@ -0,0 +1,63 @@
+/*
+ * PNX4008-specific tweaks for I2C IP3204 block
+ *
+ * Author: Vitaly Wool <vwool at ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_I2C_H__
+#define __ASM_ARCH_I2C_H__
+
+enum {
+ mstatus_tdi = 0x00000001,
+ mstatus_afi = 0x00000002,
+ mstatus_nai = 0x00000004,
+ mstatus_drmi = 0x00000008,
+ mstatus_active = 0x00000020,
+ mstatus_scl = 0x00000040,
+ mstatus_sda = 0x00000080,
+ mstatus_rff = 0x00000100,
+ mstatus_rfe = 0x00000200,
+ mstatus_tff = 0x00000400,
+ mstatus_tfe = 0x00000800,
+};
+
+enum {
+ mcntrl_tdie = 0x00000001,
+ mcntrl_afie = 0x00000002,
+ mcntrl_naie = 0x00000004,
+ mcntrl_drmie = 0x00000008,
+ mcntrl_daie = 0x00000020,
+ mcntrl_rffie = 0x00000040,
+ mcntrl_tffie = 0x00000080,
+ mcntrl_reset = 0x00000100,
+ mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+ rw_bit = 1 << 0,
+ start_bit = 1 << 8,
+ stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
+#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
+#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
+#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
+#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
+#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
+
+#define I2C_CHIP_NAME "PNX4008-I2C"
+
+#endif /* __ASM_ARCH_I2C_H___ */
diff --git a/arch/arm/mach-lpc32xx/include/mach/io.h b/arch/arm/mach-lpc32xx/include/mach/io.h
new file mode 100644
index 0000000..0da8713
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/io.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/io.h
+ *
+ * Author: Kevin Wells <kevin.wells at nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h
new file mode 100644
index 0000000..157a26c
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/irqs.h
+ *
+ * Author: Kevin Wells <kevin.wells at nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_IRQS_H
+#define __ASM_ARM_ARCH_IRQS_H
+
+/*
+ * MIC interrupts
+ */
+#define IRQ_SUB1IRQ 0
+#define IRQ_SUB2IRQ 1
+#define IRQ_PWM3 3
+#define IRQ_PWM4 4
+#define IRQ_HSTIMER 5
+#define IRQ_WATCH 6
+#define IRQ_UART_IIR3 7
+#define IRQ_UART_IIR4 8
+#define IRQ_UART_IIR5 9
+#define IRQ_UART_IIR6 10
+#define IRQ_FLASH 11
+#define IRQ_SD1 13
+#define IRQ_LCD 14
+#define IRQ_SD0 15
+#define IRQ_TIMER0 16
+#define IRQ_TIMER1 17
+#define IRQ_TIMER2 18
+#define IRQ_TIMER3 19
+#define IRQ_SSP0 20
+#define IRQ_SSP1 21
+#define IRQ_I2S0 22
+#define IRQ_I2S1 23
+#define IRQ_UART_IIR7 24
+#define IRQ_UART_IIR2 25
+#define IRQ_UART_IIR1 26
+#define IRQ_MSTIMER 27
+#define IRQ_DMA 28
+#define IRQ_ETHERNET 29
+#define IRQ_SUB1FIQ 30
+#define IRQ_SUB2FIQ 31
+
+/*
+ * SIC1 interrupts start at offset 32
+ */
+#define IRQ_JTAG_COMM_TX (32 + 1)
+#define IRQ_JTAG_COMM_RX (32 + 2)
+#define IRQ_GPI_11 (32 + 4)
+#define IRQ_TS_P (32 + 6)
+#define IRQ_TS_IRQ (32 + 7)
+#define IRQ_TS_AUX (32 + 8)
+#define IRQ_SPI2 (32 + 12)
+#define IRQ_PLLUSB (32 + 13)
+#define IRQ_PLLHCLK (32 + 14)
+#define IRQ_PLL397 (32 + 17)
+#define IRQ_I2C_2 (32 + 18)
+#define IRQ_I2C_1 (32 + 19)
+#define IRQ_RTC (32 + 20)
+#define IRQ_KEY (32 + 22)
+#define IRQ_SPI1 (32 + 23)
+#define IRQ_SW (32 + 24)
+#define IRQ_USB_OTG_TIMER (32 + 25)
+#define IRQ_USB_OTG_ATX (32 + 26)
+#define IRQ_USB_HOST (32 + 27)
+#define IRQ_USB_DEV_DMA (32 + 28)
+#define IRQ_USB_DEV_LP (32 + 29)
+#define IRQ_USB_DEV_HP (32 + 30)
+#define IRQ_USB_I2C (32 + 31)
+
+/*
+ * SIC2 interrupts start at offset 64
+ */
+#define IRQ_GPIO_00 (64 + 0)
+#define IRQ_GPIO_01 (64 + 1)
+#define IRQ_GPIO_02 (64 + 2)
+#define IRQ_GPIO_03 (64 + 3)
+#define IRQ_GPIO_04 (64 + 4)
+#define IRQ_GPIO_05 (64 + 5)
+#define IRQ_SPI2_DATAIN (64 + 6)
+#define IRQ_U2_HCTS (64 + 7)
+#define IRQ_P0_P1_IRQ (64 + 8)
+#define IRQ_GPI_08 (64 + 9)
+#define IRQ_GPI_09 (64 + 10)
+#define IRQ_GPI_10 (64 + 11)
+#define IRQ_U7_HCTS (64 + 12)
+#define IRQ_GPI_07 (64 + 15)
+#define IRQ_SDIO (64 + 18)
+#define IRQ_U5_RX (64 + 19)
+#define IRQ_SPI1_DATAIN (64 + 20)
+#define IRQ_GPI_00 (64 + 22)
+#define IRQ_GPI_01 (64 + 23)
+#define IRQ_GPI_02 (64 + 24)
+#define IRQ_GPI_03 (64 + 25)
+#define IRQ_GPI_04 (64 + 26)
+#define IRQ_GPI_05 (64 + 27)
+#define IRQ_GPI_06 (64 + 28)
+#define IRQ_SYSCLK (64 + 31)
+
+#define NR_IRQS 96
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h
new file mode 100644
index 0000000..b246973
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/memory.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/memory.h
+ *
+ * Author: Kevin Wells <kevin.wells at nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset of bank 0
+ */
+#define PHYS_OFFSET UL(0x80000000)
+
+#endif
+
diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h
new file mode 100644
index 0000000..48305a5
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/platform.h
@@ -0,0 +1,735 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/platform.h
+ *
+ * Author: Kevin Wells <kevin.wells at nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_PLATFORM_H
+#define __ASM_ARCH_PLATFORM_H
+
+#define _SBF(f, v) (((v)) << (f))
+#define _BIT(n) (1 << (n))
+
+/*
+ * AHB 0 physical base addresses
+ */
+#define SLC_BASE 0x20020000
+#define SSP0_BASE 0x20084000
+#define SPI1_BASE 0x20088000
+#define SSP1_BASE 0x2008C000
+#define SPI2_BASE 0x20090000
+#define I2S0_BASE 0x20094000
+#define SD_BASE 0x20098000
+#define I2S1_BASE 0x2009C000
+#define MLC_BASE 0x200A8000
+#define AHB0_START SLC_BASE
+#define AHB0_SIZE ((MLC_BASE - SLC_BASE) + SZ_4K)
+
+/*
+ * AHB 1 physical base addresses
+ */
+#define DMA_BASE 0x31000000
+#define USB_BASE 0x31020000
+#define USBH_BASE 0x31020000
+#define USB_OTG_BASE 0x31020000
+#define OTG_I2C_BASE 0x31020300
+#define LCD_BASE 0x31040000
+#define ETHERNET_BASE 0x31060000
+#define EMC_BASE 0x31080000
+#define ETB_CFG_BASE 0x310C0000
+#define ETB_DATA_BASE 0x310E0000
+#define AHB1_START DMA_BASE
+#define AHB1_SIZE ((EMC_BASE - DMA_BASE) + SZ_4K)
+
+/*
+ * FAB physical base addresses
+ */
+#define CLK_PM_BASE 0x40004000
+#define MIC_BASE 0x40008000
+#define SIC1_BASE 0x4000C000
+#define SIC2_BASE 0x40010000
+#define HS_UART1_BASE 0x40014000
+#define HS_UART2_BASE 0x40018000
+#define HS_UART7_BASE 0x4001C000
+#define RTC_BASE 0x40024000
+#define RTC_RAM_BASE 0x40024080
+#define GPIO_BASE 0x40028000
+#define PWM3_BASE 0x4002C000
+#define PWM4_BASE 0x40030000
+#define MSTIM_BASE 0x40034000
+#define HSTIM_BASE 0x40038000
+#define WDTIM_BASE 0x4003C000
+#define DEBUG_CTRL_BASE 0x40040000
+#define TIMER0_BASE 0x40044000
+#define ADC_BASE 0x40048000
+#define TIMER1_BASE 0x4004C000
+#define KSCAN_BASE 0x40050000
+#define UART_CTRL_BASE 0x40054000
+#define TIMER2_BASE 0x40058000
+#define PWM1_BASE 0x4005C000
+#define PWM2_BASE 0x4005C004
+#define TIMER3_BASE 0x40060000
+
+/*
+ * APB physical base addresses
+ */
+
+#define UART3_BASE 0x40080000
+#define UART4_BASE 0x40088000
+#define UART5_BASE 0x40090000
+#define UART6_BASE 0x40098000
+#define I2C1_BASE 0x400A0000
+#define I2C2_BASE 0x400A8000
+
+/*
+ * FAB and APB base and sizing
+ */
+#define FABAPB_START CLK_PM_BASE
+#define FABAPB_SIZE ((I2C2_BASE - CLK_PM_BASE) + SZ_4K)
+
+/*
+ * Internal memory Bases
+ */
+#define IRAM_BASE 0x08000000
+#define IROM_BASE 0x0C000000
+
+/*
+ * External Static Memory Bank Address Space Bases
+ */
+#define EMC_CS0_BASE 0xE0000000
+#define EMC_CS1_BASE 0xE1000000
+#define EMC_CS2_BASE 0xE2000000
+#define EMC_CS3_BASE 0xE3000000
+
+/*
+ * External SDRAM Memory Bank Address Space Bases
+ */
+#define EMC_DYCS0_BASE 0x80000000
+#define EMC_DYCS1_BASE 0xA0000000
+
+/*
+ * Clock and crystal information
+ */
+#define MAIN_OSC_FREQ 13000000
+#define CLOCK_OSC_FREQ 32768
+
+/*
+ * IRAM size
+*/
+#define LPC32XX_IRAM_SIZE CONFIG_ARCH_LPC32XX_IRAM_SIZE
+
+/*
+ * Clock and Power control register offsets
+ */
+#define CLKPWR_DEBUG_CTRL(x) ((x) + 0x000)
+#define CLKPWR_BOOTMAP(x) ((x) + 0x014)
+#define CLKPWR_P01_ER(x) ((x) + 0x018)
+#define CLKPWR_USBCLK_PDIV(x) ((x) + 0x01C)
+#define CLKPWR_INT_ER(x) ((x) + 0x020)
+#define CLKPWR_INT_RS(x) ((x) + 0x024)
+#define CLKPWR_INT_SR(x) ((x) + 0x028)
+#define CLKPWR_INT_AP(x) ((x) + 0x02C)
+#define CLKPWR_PIN_ER(x) ((x) + 0x030)
+#define CLKPWR_PIN_RS(x) ((x) + 0x034)
+#define CLKPWR_PIN_SR(x) ((x) + 0x038)
+#define CLKPWR_PIN_AP(x) ((x) + 0x03C)
+#define CLKPWR_HCLK_DIV(x) ((x) + 0x040)
+#define CLKPWR_PWR_CTRL(x) ((x) + 0x044)
+#define CLKPWR_PLL397_CTRL(x) ((x) + 0x048)
+#define CLKPWR_MAIN_OSC_CTRL(x) ((x) + 0x04C)
+#define CLKPWR_SYSCLK_CTRL(x) ((x) + 0x050)
+#define CLKPWR_LCDCLK_CTRL(x) ((x) + 0x054)
+#define CLKPWR_HCLKPLL_CTRL(x) ((x) + 0x058)
+#define CLKPWR_ADC_CLK_CTRL_1(x) ((x) + 0x060)
+#define CLKPWR_USB_CTRL(x) ((x) + 0x064)
+#define CLKPWR_SDRAMCLK_CTRL(x) ((x) + 0x068)
+#define CLKPWR_DDR_LAP_NOM(x) ((x) + 0x06C)
+#define CLKPWR_DDR_LAP_COUNT(x) ((x) + 0x070)
+#define CLKPWR_DDR_LAP_DELAY(x) ((x) + 0x074)
+#define CLKPWR_SSP_CLK_CTRL(x) ((x) + 0x078)
+#define CLKPWR_I2S_CLK_CTRL(x) ((x) + 0x07C)
+#define CLKPWR_MS_CTRL(x) ((x) + 0x080)
+#define CLKPWR_MACCLK_CTRL(x) ((x) + 0x090)
+#define CLKPWR_TEST_CLK_SEL(x) ((x) + 0x0A4)
+#define CLKPWR_SFW_INT(x) ((x) + 0x0A8)
+#define CLKPWR_I2C_CLK_CTRL(x) ((x) + 0x0AC)
+#define CLKPWR_KEY_CLK_CTRL(x) ((x) + 0x0B0)
+#define CLKPWR_ADC_CLK_CTRL(x) ((x) + 0x0B4)
+#define CLKPWR_PWM_CLK_CTRL(x) ((x) + 0x0B8)
+#define CLKPWR_TIMER_CLK_CTRL(x) ((x) + 0x0BC)
+#define CLKPWR_TIMERS_PWMS_CLK_CTRL_1(x) ((x) + 0x0C0)
+#define CLKPWR_SPI_CLK_CTRL(x) ((x) + 0x0C4)
+#define CLKPWR_NAND_CLK_CTRL(x) ((x) + 0x0C8)
+#define CLKPWR_UART3_CLK_CTRL(x) ((x) + 0x0D0)
+#define CLKPWR_UART4_CLK_CTRL(x) ((x) + 0x0D4)
+#define CLKPWR_UART5_CLK_CTRL(x) ((x) + 0x0D8)
+#define CLKPWR_UART6_CLK_CTRL(x) ((x) + 0x0DC)
+#define CLKPWR_IRDA_CLK_CTRL(x) ((x) + 0x0E0)
+#define CLKPWR_UART_CLK_CTRL(x) ((x) + 0x0E4)
+#define CLKPWR_DMA_CLK_CTRL(x) ((x) + 0x0E8)
+#define CLKPWR_AUTOCLOCK(x) ((x) + 0x0EC)
+#define CLKPWR_DEVID(x, y) ((x) + 0x130 + (y))
+
+/*
+ * clkpwr_debug_ctrl register definitions
+*/
+#define CLKPWR_VFP_CLOCK_ENABLE_BIT _BIT(4)
+
+/*
+ * clkpwr_bootmap register definitions
+ */
+#define CLKPWR_BOOTMAP_SEL_BIT _BIT(1)
+
+/*
+ * clkpwr_start_gpio register bit definitions
+ */
+#define CLKPWR_GPIOSRC_P1IO23_BIT _BIT(31)
+#define CLKPWR_GPIOSRC_P1IO22_BIT _BIT(30)
+#define CLKPWR_GPIOSRC_P1IO21_BIT _BIT(29)
+#define CLKPWR_GPIOSRC_P1IO20_BIT _BIT(28)
+#define CLKPWR_GPIOSRC_P1IO19_BIT _BIT(27)
+#define CLKPWR_GPIOSRC_P1IO18_BIT _BIT(26)
+#define CLKPWR_GPIOSRC_P1IO17_BIT _BIT(25)
+#define CLKPWR_GPIOSRC_P1IO16_BIT _BIT(24)
+#define CLKPWR_GPIOSRC_P1IO15_BIT _BIT(23)
+#define CLKPWR_GPIOSRC_P1IO14_BIT _BIT(22)
+#define CLKPWR_GPIOSRC_P1IO13_BIT _BIT(21)
+#define CLKPWR_GPIOSRC_P1IO12_BIT _BIT(20)
+#define CLKPWR_GPIOSRC_P1IO11_BIT _BIT(19)
+#define CLKPWR_GPIOSRC_P1IO10_BIT _BIT(18)
+#define CLKPWR_GPIOSRC_P1IO9_BIT _BIT(17)
+#define CLKPWR_GPIOSRC_P1IO8_BIT _BIT(16)
+#define CLKPWR_GPIOSRC_P1IO7_BIT _BIT(15)
+#define CLKPWR_GPIOSRC_P1IO6_BIT _BIT(14)
+#define CLKPWR_GPIOSRC_P1IO5_BIT _BIT(13)
+#define CLKPWR_GPIOSRC_P1IO4_BIT _BIT(12)
+#define CLKPWR_GPIOSRC_P1IO3_BIT _BIT(11)
+#define CLKPWR_GPIOSRC_P1IO2_BIT _BIT(10)
+#define CLKPWR_GPIOSRC_P1IO1_BIT _BIT(9)
+#define CLKPWR_GPIOSRC_P1IO0_BIT _BIT(8)
+#define CLKPWR_GPIOSRC_P0IO7_BIT _BIT(7)
+#define CLKPWR_GPIOSRC_P0IO6_BIT _BIT(6)
+#define CLKPWR_GPIOSRC_P0IO5_BIT _BIT(5)
+#define CLKPWR_GPIOSRC_P0IO4_BIT _BIT(4)
+#define CLKPWR_GPIOSRC_P0IO3_BIT _BIT(3)
+#define CLKPWR_GPIOSRC_P0IO2_BIT _BIT(2)
+#define CLKPWR_GPIOSRC_P0IO1_BIT _BIT(1)
+#define CLKPWR_GPIOSRC_P0IO0_BIT _BIT(0)
+
+/*
+ * clkpwr_usbclk_pdiv register definitions
+ */
+#define CLKPWR_SET_PLL_USBPDIV(n) ((n) & 0xF)
+#define CLKPWR_USBPDIV_PLL_MASK 0xF
+
+/*
+ * clkpwr_start_int, clkpwr_start_raw_sts_int, clkpwr_start_sts_int,
+ * clkpwr_start_pol_int, register bit definitions
+ */
+#define CLKPWR_INTSRC_ADC_BIT _BIT(31)
+#define CLKPWR_INTSRC_TS_P_BIT _BIT(30)
+#define CLKPWR_INTSRC_TS_AUX_BIT _BIT(29)
+#define CLKPWR_INTSRC_USBAHNEEDCLK_BIT _BIT(26)
+#define CLKPWR_INTSRC_MSTIMER_BIT _BIT(25)
+#define CLKPWR_INTSRC_RTC_BIT _BIT(24)
+#define CLKPWR_INTSRC_USBNEEDCLK_BIT _BIT(23)
+#define CLKPWR_INTSRC_USB_BIT _BIT(22)
+#define CLKPWR_INTSRC_I2C_BIT _BIT(21)
+#define CLKPWR_INTSRC_USBOTGTIMER_BIT _BIT(20)
+#define CLKPWR_INTSRC_USBATXINT_BIT _BIT(19)
+#define CLKPWR_INTSRC_KEY_BIT _BIT(16)
+#define CLKPWR_INTSRC_MAC_BIT _BIT(7)
+#define CLKPWR_INTSRC_P0P1_BIT _BIT(6)
+#define CLKPWR_INTSRC_GPIO_05_BIT _BIT(5)
+#define CLKPWR_INTSRC_GPIO_04_BIT _BIT(4)
+#define CLKPWR_INTSRC_GPIO_03_BIT _BIT(3)
+#define CLKPWR_INTSRC_GPIO_02_BIT _BIT(2)
+#define CLKPWR_INTSRC_GPIO_01_BIT _BIT(1)
+#define CLKPWR_INTSRC_GPIO_00_BIT _BIT(0)
+
+/*
+ * clkpwr_start_pin, clkpwr_start_raw_sts_pin, clkpwr_start_sts_pin,
+ * clkpwr_start_pol_pin register bit definitions
+ */
+#define CLKPWR_EXTSRC_U7_RX_BIT _BIT(31)
+#define CLKPWR_EXTSRC_U7_HCTS_BIT _BIT(30)
+#define CLKPWR_EXTSRC_U6_IRRX_BIT _BIT(28)
+#define CLKPWR_EXTSRC_U5_RX_BIT _BIT(26)
+#define CLKPWR_EXTSRC_GPI_11_BIT _BIT(25)
+#define CLKPWR_EXTSRC_U3_RX_BIT _BIT(24)
+#define CLKPWR_EXTSRC_U2_HCTS_BIT _BIT(23)
+#define CLKPWR_EXTSRC_U2_RX_BIT _BIT(22)
+#define CLKPWR_EXTSRC_U1_RX_BIT _BIT(21)
+#define CLKPWR_EXTSRC_MSDIO_INT_BIT _BIT(18)
+#define CLKPWR_EXTSRC_MSDIO_SRT_BIT _BIT(17)
+#define CLKPWR_EXTSRC_GPIO_O6_BIT _BIT(16)
+#define CLKPWR_EXTSRC_GPIO_O5_BIT _BIT(15)
+#define CLKPWR_EXTSRC_GPIO_O4_BIT _BIT(14)
+#define CLKPWR_EXTSRC_GPIO_O3_BIT _BIT(13)
+#define CLKPWR_EXTSRC_GPIO_O2_BIT _BIT(12)
+#define CLKPWR_EXTSRC_GPIO_O1_BIT _BIT(11)
+#define CLKPWR_EXTSRC_GPIO_O0_BIT _BIT(10)
+#define CLKPWR_EXTSRC_SYSCLKEN_BIT _BIT(9)
+#define CLKPWR_EXTSRC_SPI1_DATIN_BIT _BIT(8)
+#define CLKPWR_EXTSRC_GPIO_O7_BIT _BIT(7)
+#define CLKPWR_EXTSRC_SPI2_DATIN_BIT _BIT(6)
+#define CLKPWR_EXTSRC_GPIO_19_BIT _BIT(5)
+#define CLKPWR_EXTSRC_GPIO_O9_BIT _BIT(4)
+#define CLKPWR_EXTSRC_GPIO_O8_BIT _BIT(3)
+
+/*
+ * clkpwr_hclk_div register definitions
+ */
+#define CLKPWR_HCLKDIV_DDRCLK_STOP (0x0 << 7)
+#define CLKPWR_HCLKDIV_DDRCLK_NORM (0x1 << 7)
+#define CLKPWR_HCLKDIV_DDRCLK_HALF (0x2 << 7)
+#define CLKPWR_HCLKDIV_PCLK_DIV(n) (((n) & 0x1F) << 2)
+#define CLKPWR_HCLKDIV_DIV_2POW(n) ((n) & 0x3)
+
+/*
+ * clkpwr_pwr_ctrl register definitions
+ */
+#define CLKPWR_CTRL_FORCE_PCLK _BIT(10)
+#define CLKPWR_SDRAM_SELF_RFSH _BIT(9)
+#define CLKPWR_UPD_SDRAM_SELF_RFSH _BIT(8)
+#define CLKPWR_AUTO_SDRAM_SELF_RFSH _BIT(7)
+#define CLKPWR_HIGHCORE_STATE_BIT _BIT(5)
+#define CLKPWR_SYSCLKEN_STATE_BIT _BIT(4)
+#define CLKPWR_SYSCLKEN_GPIO_EN _BIT(3)
+#define CLKPWR_SELECT_RUN_MODE _BIT(2)
+#define CLKPWR_HIGHCORE_GPIO_EN _BIT(1)
+#define CLKPWR_STOP_MODE_CTRL _BIT(0)
+
+/*
+ * clkpwr_pll397_ctrl register definitions
+ */
+#define CLKPWR_PLL397_MSLOCK_STS _BIT(10)
+#define CLKPWR_PLL397_BYPASS _BIT(9)
+#define CLKPWR_PLL397_BIAS_NORM 0x000
+#define CLKPWR_PLL397_BIAS_N12_5 0x040
+#define CLKPWR_PLL397_BIAS_N25 0x080
+#define CLKPWR_PLL397_BIAS_N37_5 0x0C0
+#define CLKPWR_PLL397_BIAS_P12_5 0x100
+#define CLKPWR_PLL397_BIAS_P25 0x140
+#define CLKPWR_PLL397_BIAS_P37_5 0x180
+#define CLKPWR_PLL397_BIAS_P50 0x1C0
+#define CLKPWR_PLL397_BIAS_MASK 0x1C0
+#define CLKPWR_SYSCTRL_PLL397_DIS _BIT(1)
+#define CLKPWR_SYSCTRL_PLL397_STS _BIT(0)
+
+/*
+ * clkpwr_main_osc_ctrl register definitions
+ */
+#define CLKPWR_MOSC_ADD_CAP(n) (((n) & 0x7F) << 2)
+#define CLKPWR_MOSC_CAP_MASK (0x7F << 2)
+#define CLKPWR_TEST_MODE _BIT(1)
+#define CLKPWR_MOSC_DISABLE _BIT(0)
+
+/*
+ * clkpwr_sysclk_ctrl register definitions
+ */
+#define CLKPWR_SYSCTRL_BP_TRIG(n) (((n) & 0x3FF) << 2)
+#define CLKPWR_SYSCTRL_BP_MASK (0x3FF << 2)
+#define CLKPWR_SYSCTRL_USEPLL397 _BIT(1)
+#define CLKPWR_SYSCTRL_SYSCLKMUX _BIT(0)
+
+/*
+ * clkpwr_lcdclk_ctrl register definitions
+ */
+#define CLKPWR_LCDCTRL_LCDTYPE_TFT12 0x000
+#define CLKPWR_LCDCTRL_LCDTYPE_TFT16 0x040
+#define CLKPWR_LCDCTRL_LCDTYPE_TFT15 0x080
+#define CLKPWR_LCDCTRL_LCDTYPE_TFT24 0x0C0
+#define CLKPWR_LCDCTRL_LCDTYPE_STN4M 0x100
+#define CLKPWR_LCDCTRL_LCDTYPE_STN8C 0x140
+#define CLKPWR_LCDCTRL_LCDTYPE_DSTN4M 0x180
+#define CLKPWR_LCDCTRL_LCDTYPE_DSTN8C 0x1C0
+#define CLKPWR_LCDCTRL_LCDTYPE_MSK 0x01C0
+#define CLKPWR_LCDCTRL_CLK_EN 0x020
+#define CLKPWR_LCDCTRL_SET_PSCALE(n) ((n - 1) & 0x1F)
+#define CLKPWR_LCDCTRL_PSCALE_MSK 0x001F
+
+/*
+ * clkpwr_hclkpll_ctrl register definitions
+ */
+#define CLKPWR_HCLKPLL_POWER_UP _BIT(16)
+#define CLKPWR_HCLKPLL_CCO_BYPASS _BIT(15)
+#define CLKPWR_HCLKPLL_POSTDIV_BYPASS _BIT(14)
+#define CLKPWR_HCLKPLL_FDBK_SEL_FCLK _BIT(13)
+#define CLKPWR_HCLKPLL_POSTDIV_2POW(n) (((n) & 0x3) << 11)
+#define CLKPWR_HCLKPLL_PREDIV_PLUS1(n) (((n) & 0x3) << 9)
+#define CLKPWR_HCLKPLL_PLLM(n) (((n) & 0xFF) << 1)
+#define CLKPWR_HCLKPLL_PLL_STS _BIT(0)
+
+/*
+ * clkpwr_adc_clk_ctrl_1 register definitions
+ */
+#define CLKPWR_ADCCTRL1_RTDIV(n) (((n) & 0xFF) << 0)
+#define CLKPWR_ADCCTRL1_PCLK_SEL _BIT(8)
+
+/*
+ * clkpwr_usb_ctrl register definitions
+ */
+#define CLKPWR_USBCTRL_HCLK_EN _BIT(24)
+#define CLKPWR_USBCTRL_USBI2C_EN _BIT(23)
+#define CLKPWR_USBCTRL_USBDVND_EN _BIT(22)
+#define CLKPWR_USBCTRL_USBHSTND_EN _BIT(21)
+#define CLKPWR_USBCTRL_PU_ADD (0x0 << 19)
+#define CLKPWR_USBCTRL_BUS_KEEPER (0x1 << 19)
+#define CLKPWR_USBCTRL_PD_ADD (0x3 << 19)
+#define CLKPWR_USBCTRL_CLK_EN2 _BIT(18)
+#define CLKPWR_USBCTRL_CLK_EN1 _BIT(17)
+#define CLKPWR_USBCTRL_PLL_PWRUP _BIT(16)
+#define CLKPWR_USBCTRL_CCO_BYPASS _BIT(15)
+#define CLKPWR_USBCTRL_POSTDIV_BYPASS _BIT(14)
+#define CLKPWR_USBCTRL_FDBK_SEL_FCLK _BIT(13)
+#define CLKPWR_USBCTRL_POSTDIV_2POW(n) (((n) & 0x3) << 11)
+#define CLKPWR_USBCTRL_PREDIV_PLUS1(n) (((n) & 0x3) << 9)
+#define CLKPWR_USBCTRL_FDBK_PLUS1(n) (((n) & 0xFF) << 1)
+#define CLKPWR_USBCTRL_PLL_STS _BIT(0)
+
+/*
+ * clkpwr_sdramclk_ctrl register definitions
+ */
+#define CLKPWR_SDRCLK_FASTSLEW_CLK _BIT(22)
+#define CLKPWR_SDRCLK_FASTSLEW _BIT(21)
+#define CLKPWR_SDRCLK_FASTSLEW_DAT _BIT(20)
+#define CLKPWR_SDRCLK_SW_DDR_RESET _BIT(19)
+#define CLKPWR_SDRCLK_HCLK_DLY(n) (((n) & 0x1F) << 14)
+#define CLKPWR_SDRCLK_DLY_ADDR_STS _BIT(13)
+#define CLKPWR_SDRCLK_SENS_FACT(n) (((n) & 0x7) << 10)
+#define CLKPWR_SDRCLK_USE_CAL _BIT(9)
+#define CLKPWR_SDRCLK_DO_CAL _BIT(8)
+#define CLKPWR_SDRCLK_CAL_ON_RTC _BIT(7)
+#define CLKPWR_SDRCLK_DQS_DLY(n) (((n) & 0x1F) << 2)
+#define CLKPWR_SDRCLK_USE_DDR _BIT(1)
+#define CLKPWR_SDRCLK_CLK_DIS _BIT(0)
+
+/*
+ * clkpwr_ssp_blk_ctrl register definitions
+ */
+#define CLKPWR_SSPCTRL_DMA_SSP1RX _BIT(5)
+#define CLKPWR_SSPCTRL_DMA_SSP1TX _BIT(4)
+#define CLKPWR_SSPCTRL_DMA_SSP0RX _BIT(3)
+#define CLKPWR_SSPCTRL_DMA_SSP0TX _BIT(2)
+#define CLKPWR_SSPCTRL_SSPCLK1_EN _BIT(1)
+#define CLKPWR_SSPCTRL_SSPCLK0_EN _BIT(0)
+
+/*
+ * clkpwr_i2s_clk_ctrl register definitions
+ */
+#define CLKPWR_I2SCTRL_I2S1_RX_FOR_TX _BIT(6)
+#define CLKPWR_I2SCTRL_I2S1_TX_FOR_RX _BIT(5)
+#define CLKPWR_I2SCTRL_I2S1_USE_DMA _BIT(4)
+#define CLKPWR_I2SCTRL_I2S0_RX_FOR_TX _BIT(3)
+#define CLKPWR_I2SCTRL_I2S0_TX_FOR_RX _BIT(2)
+#define CLKPWR_I2SCTRL_I2SCLK1_EN _BIT(1)
+#define CLKPWR_I2SCTRL_I2SCLK0_EN _BIT(0)
+
+/*
+ * clkpwr_ms_ctrl register definitions
+ */
+#define CLKPWR_MSCARD_MSDIO_PIN_DIS _BIT(10)
+#define CLKPWR_MSCARD_MSDIO_PU_EN _BIT(9)
+#define CLKPWR_MSCARD_MSDIO23_DIS _BIT(8)
+#define CLKPWR_MSCARD_MSDIO1_DIS _BIT(7)
+#define CLKPWR_MSCARD_MSDIO0_DIS _BIT(6)
+#define CLKPWR_MSCARD_SDCARD_EN _BIT(5)
+#define CLKPWR_MSCARD_SDCARD_DIV(n) ((n) & 0xF)
+
+/*
+ * clkpwr_macclk_ctrl register definitions
+ */
+#define CLKPWR_MACCTRL_NO_ENET_PIS 0x00
+#define CLKPWR_MACCTRL_USE_MII_PINS 0x08
+#define CLKPWR_MACCTRL_USE_RMII_PINS 0x18
+#define CLKPWR_MACCTRL_PINS_MSK 0x18
+#define CLKPWR_MACCTRL_DMACLK_EN _BIT(2)
+#define CLKPWR_MACCTRL_MMIOCLK_EN _BIT(1)
+#define CLKPWR_MACCTRL_HRCCLK_EN _BIT(0)
+
+/*
+ * clkpwr_test_clk_sel register definitions
+ */
+#define CLKPWR_TESTCLK1_SEL_PERCLK (0x0 << 5)
+#define CLKPWR_TESTCLK1_SEL_RTC (0x1 << 5)
+#define CLKPWR_TESTCLK1_SEL_MOSC (0x2 << 5)
+#define CLKPWR_TESTCLK1_SEL_MASK (0x3 << 5)
+#define CLKPWR_TESTCLK_TESTCLK1_EN _BIT(4)
+#define CLKPWR_TESTCLK2_SEL_HCLK (0x0 << 1)
+#define CLKPWR_TESTCLK2_SEL_PERCLK (0x1 << 1)
+#define CLKPWR_TESTCLK2_SEL_USBCLK (0x2 << 1)
+#define CLKPWR_TESTCLK2_SEL_MOSC (0x5 << 1)
+#define CLKPWR_TESTCLK2_SEL_PLL397 (0x7 << 1)
+#define CLKPWR_TESTCLK2_SEL_MASK (0x7 << 1)
+#define CLKPWR_TESTCLK_TESTCLK2_EN _BIT(0)
+
+/*
+ * clkpwr_sw_int register definitions
+ */
+#define CLKPWR_SW_INT(n) (_BIT(0) | (((n) & 0x7F) << 1))
+#define CLKPWR_SW_GET_ARG(n) (((n) & 0xFE) >> 1)
+
+/*
+ * clkpwr_i2c_clk_ctrl register definitions
+ */
+#define CLKPWR_I2CCLK_USBI2CHI_DRIVE _BIT(4)
+#define CLKPWR_I2CCLK_I2C2HI_DRIVE _BIT(3)
+#define CLKPWR_I2CCLK_I2C1HI_DRIVE _BIT(2)
+#define CLKPWR_I2CCLK_I2C2CLK_EN _BIT(1)
+#define CLKPWR_I2CCLK_I2C1CLK_EN _BIT(0)
+
+/*
+ * clkpwr_key_clk_ctrl register definitions
+ */
+#define CLKPWR_KEYCLKCTRL_CLK_EN 0x1
+
+/*
+ * clkpwr_adc_clk_ctrl register definitions
+ */
+#define CLKPWR_ADC32CLKCTRL_CLK_EN 0x1
+
+/*
+ * clkpwr_pwm_clk_ctrl register definitions
+ */
+#define CLKPWR_PWMCLK_PWM2_DIV(n) (((n) & 0xF) << 8)
+#define CLKPWR_PWMCLK_PWM1_DIV(n) (((n) & 0xF) << 4)
+#define CLKPWR_PWMCLK_PWM2SEL_PCLK 0x8
+#define CLKPWR_PWMCLK_PWM2CLK_EN 0x4
+#define CLKPWR_PWMCLK_PWM1SEL_PCLK 0x2
+#define CLKPWR_PWMCLK_PWM1CLK_EN 0x1
+
+/*
+ * clkpwr_timer_clk_ctrl register definitions
+ */
+#define CLKPWR_PWMCLK_HSTIMER_EN 0x2
+#define CLKPWR_PWMCLK_WDOG_EN 0x1
+
+/*
+ * clkpwr_timers_pwms_clk_ctrl_1 register definitions
+ */
+#define CLKPWR_TMRPWMCLK_TIMER3_EN 0x20
+#define CLKPWR_TMRPWMCLK_TIMER2_EN 0x10
+#define CLKPWR_TMRPWMCLK_TIMER1_EN 0x08
+#define CLKPWR_TMRPWMCLK_TIMER0_EN 0x04
+#define CLKPWR_TMRPWMCLK_PWM4_EN 0x02
+#define CLKPWR_TMRPWMCLK_PWM3_EN 0x01
+
+/*
+ * clkpwr_spi_clk_ctrl register definitions
+ */
+#define CLKPWR_SPICLK_SET_SPI2DATIO 0x80
+#define CLKPWR_SPICLK_SET_SPI2CLK 0x40
+#define CLKPWR_SPICLK_USE_SPI2 0x20
+#define CLKPWR_SPICLK_SPI2CLK_EN 0x10
+#define CLKPWR_SPICLK_SET_SPI1DATIO 0x08
+#define CLKPWR_SPICLK_SET_SPI1CLK 0x04
+#define CLKPWR_SPICLK_USE_SPI1 0x02
+#define CLKPWR_SPICLK_SPI1CLK_EN 0x01
+
+/*
+ * clkpwr_nand_clk_ctrl register definitions
+ */
+#define CLKPWR_NANDCLK_INTSEL_MLC 0x20
+#define CLKPWR_NANDCLK_DMA_RNB 0x10
+#define CLKPWR_NANDCLK_DMA_INT 0x08
+#define CLKPWR_NANDCLK_SEL_SLC 0x04
+#define CLKPWR_NANDCLK_MLCCLK_EN 0x02
+#define CLKPWR_NANDCLK_SLCCLK_EN 0x01
+
+/*
+ * clkpwr_uart3_clk_ctrl, clkpwr_uart4_clk_ctrl, clkpwr_uart5_clk_ctrl
+ * and clkpwr_uart6_clk_ctrl register definitions
+ */
+#define CLKPWR_UART_Y_DIV(y) ((y) & 0xFF)
+#define CLKPWR_UART_X_DIV(x) (((x) & 0xFF) << 8)
+#define CLKPWR_UART_USE_HCLK _BIT(16)
+
+/*
+ * clkpwr_irda_clk_ctrl register definitions
+ */
+#define CLKPWR_IRDA_Y_DIV(y) ((y) & 0xFF)
+#define CLKPWR_IRDA_X_DIV(x) (((x) & 0xFF) << 8)
+
+/*
+ * clkpwr_uart_clk_ctrl register definitions
+ */
+#define CLKPWR_UARTCLKCTRL_UART6_EN _BIT(3)
+#define CLKPWR_UARTCLKCTRL_UART5_EN _BIT(2)
+#define CLKPWR_UARTCLKCTRL_UART4_EN _BIT(1)
+#define CLKPWR_UARTCLKCTRL_UART3_EN _BIT(0)
+
+/*
+ * clkpwr_dmaclk_ctrl register definitions
+ */
+#define CLKPWR_DMACLKCTRL_CLK_EN 0x1
+
+/*
+ * clkpwr_autoclock register definitions
+ */
+#define CLKPWR_AUTOCLK_USB_EN 0x40
+#define CLKPWR_AUTOCLK_IRAM_EN 0x02
+#define CLKPWR_AUTOCLK_IROM_EN 0x01
+
+/*
+ * Interrupt controller register offsets
+ */
+#define INTC_MASK 0x00
+#define INTC_RAW_STAT 0x04
+#define INTC_STAT 0x08
+#define INTC_POLAR 0x0C
+#define INTC_ACT_TYPE 0x10
+#define INTC_TYPE 0x14
+
+/*
+ *
+ * Timer/counter register offsets
+ *
+ */
+#define TIMER_IR(x) ((x) + 0x00)
+#define TIMER_TCR(x) ((x) + 0x04)
+#define TIMER_TC(x) ((x) + 0x08)
+#define TIMER_PR(x) ((x) + 0x0C)
+#define TIMER_PC(x) ((x) + 0x10)
+#define TIMER_MCR(x) ((x) + 0x14)
+#define TIMER_MR0(x) ((x) + 0x18)
+#define TIMER_MR1(x) ((x) + 0x1C)
+#define TIMER_MR2(x) ((x) + 0x20)
+#define TIMER_MR3(x) ((x) + 0x24)
+#define TIMER_CCR(x) ((x) + 0x28)
+#define TIMER_CR0(x) ((x) + 0x2C)
+#define TIMER_CR1(x) ((x) + 0x30)
+#define TIMER_CR2(x) ((x) + 0x34)
+#define TIMER_CR3(x) ((x) + 0x38)
+#define TIMER_EMR(x) ((x) + 0x3C)
+#define TIMER_CTCR(x) ((x) + 0x70)
+
+/*
+ * ir register definitions
+ */
+#define TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3))
+#define TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3)))
+
+/*
+ * tcr register definitions
+ */
+#define TIMER_CNTR_TCR_EN 0x1
+#define TIMER_CNTR_TCR_RESET 0x2
+
+/*
+ * mcr register definitions
+ */
+#define TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3))
+#define TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1))
+#define TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2))
+
+/*
+ *
+ * Standard UART register offsets
+ *
+ */
+#define UART_DLL_FIFO(x) ((x) + 0x00)
+#define UART_DLM_IER(x) ((x) + 0x04)
+#define UART_IIR_FCR(x) ((x) + 0x08)
+#define UART_LCR_(x) ((x) + 0x0C)
+#define UART_MODEM_CTRL(x) ((x) + 0x10)
+#define UART_LSR_(x) ((x) + 0x14)
+#define UART_MODEM_STATUS(x) ((x) + 0x18)
+#define UART_RXLEV(x) ((x) + 0x1C)
+
+/*
+ *
+ * UART control structure offsets
+ *
+ */
+#define UARTCTL_CTRL(x) ((x) + 0x00)
+#define UARTCTL_CLKMODE(x) ((x) + 0x04)
+#define UARTCTL_CLOOP(x) ((x) + 0x08)
+
+/*
+ * ctrl register definitions
+ */
+#define UART_U3_MD_CTRL_EN _BIT(11)
+#define UART_IRRX6_INV_EN _BIT(10)
+#define UART_HDPX_EN _BIT(9)
+#define UART_UART6_IRDAMOD_BYPASS _BIT(5)
+#define RT_IRTX6_INV_EN _BIT(4)
+#define RT_IRTX6_INV_MIR_EN _BIT(3)
+#define RT_RX_IRPULSE_3_16_115K _BIT(2)
+#define RT_TX_IRPULSE_3_16_115K _BIT(1)
+#define UART_U5_ROUTE_TO_USB _BIT(0)
+
+/*
+ * clkmode register definitions
+ */
+#define UART_ENABLED_CLOCKS(n) (((n) >> 16) & 0x7F)
+#define UART_ENABLED_CLOCK(n, u) (((n) >> (16 + (u))) & 0x1)
+#define UART_ENABLED_CLKS_ANY _BIT(14)
+#define UART_CLKMODE_OFF 0x0
+#define UART_CLKMODE_ON 0x1
+#define UART_CLKMODE_AUTO 0x2
+#define UART_CLKMODE_MASK(u) (0x3 << ((((u) - 3) * 2) + 4))
+#define UART_CLKMODE_LOAD(m, u) ((m) << ((((u) - 3) * 2) + 4))
+
+/*
+ *
+ * GPIO Module Register offsets
+ *
+ */
+#define GPIO_P3_INP_STATE(x) ((x) + 0x000)
+#define GPIO_P3_OUTP_SET(x) ((x) + 0x004)
+#define GPIO_P3_OUTP_CLR(x) ((x) + 0x008)
+#define GPIO_P3_OUTP_STATE(x) ((x) + 0x00C)
+#define GPIO_P2_DIR_SET(x) ((x) + 0x010)
+#define GPIO_P2_DIR_CLR(x) ((x) + 0x014)
+#define GPIO_P2_DIR_STATE(x) ((x) + 0x018)
+#define GPIO_P2_INP_STATE(x) ((x) + 0x01C)
+#define GPIO_P2_OUTP_SET(x) ((x) + 0x020)
+#define GPIO_P2_OUTP_CLR(x) ((x) + 0x024)
+#define GPIO_P2_MUX_SET(x) ((x) + 0x028)
+#define GPIO_P2_MUX_CLR(x) ((x) + 0x02C)
+#define GPIO_P2_MUX_STATE(x) ((x) + 0x030)
+#define GPIO_P0_INP_STATE(x) ((x) + 0x040)
+#define GPIO_P0_OUTP_SET(x) ((x) + 0x044)
+#define GPIO_P0_OUTP_CLR(x) ((x) + 0x048)
+#define GPIO_P0_OUTP_STATE(x) ((x) + 0x04C)
+#define GPIO_P0_DIR_SET(x) ((x) + 0x050)
+#define GPIO_P0_DIR_CLR(x) ((x) + 0x054)
+#define GPIO_P0_DIR_STATE(x) ((x) + 0x058)
+#define GPIO_P1_INP_STATE(x) ((x) + 0x060)
+#define GPIO_P1_OUTP_SET(x) ((x) + 0x064)
+#define GPIO_P1_OUTP_CLR(x) ((x) + 0x068)
+#define GPIO_P1_OUTP_STATE(x) ((x) + 0x06C)
+#define GPIO_P1_DIR_SET(x) ((x) + 0x070)
+#define GPIO_P1_DIR_CLR(x) ((x) + 0x074)
+#define GPIO_P1_DIR_STATE(x) ((x) + 0x078)
+#define GPIO_P_MUX_SET(x) ((x) + 0x100)
+#define GPIO_P_MUX_CLR(x) ((x) + 0x104)
+#define GPIO_P_MUX_STATE(x) ((x) + 0x108)
+#define GPIO_P3_MUX_SET(x) ((x) + 0x110)
+#define GPIO_P3_MUX_CLR(x) ((x) + 0x114)
+#define GPIO_P3_MUX_STATE(x) ((x) + 0x118)
+#define GPIO_P0_MUX_SET(x) ((x) + 0x120)
+#define GPIO_P0_MUX_CLR(x) ((x) + 0x124)
+#define GPIO_P0_MUX_STATE(x) ((x) + 0x128)
+#define GPIO_P1_MUX_SET(x) ((x) + 0x130)
+#define GPIO_P1_MUX_CLR(x) ((x) + 0x134)
+#define GPIO_P1_MUX_STATE(x) ((x) + 0x138)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h
new file mode 100644
index 0000000..29bd2e4
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/system.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/system.h
+ *
+ * Author: Kevin Wells <kevin.wells at nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ extern void lpc32xx_watchdog_reset(void);
+
+ switch (mode) {
+ case 's':
+ case 'h':
+ printk(KERN_CRIT "RESET: Rebooting system\n");
+
+ /* Disable interrupts */
+ local_irq_disable();
+
+ lpc32xx_watchdog_reset();
+ break;
+
+ default:
+ /* Do nothing */
+ break;
+ }
+
+ /* Wait for watchdog to reset system */
+ while (1)
+ ;
+}
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/timex.h b/arch/arm/mach-lpc32xx/include/mach/timex.h
new file mode 100644
index 0000000..1f872c5
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/timex.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/timex.h
+ *
+ * Author: Kevin Wells <kevin.wells at nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * Rate in Hz of the main system oscillator. This value should match
+ * the value 'MAIN_OSC_FREQ' in platform.h
+ */
+#define CLOCK_TICK_RATE 13000000
+
+#endif
+
diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
new file mode 100644
index 0000000..a00ecc5
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
@@ -0,0 +1,114 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/uncompress.h
+ *
+ * Author: Kevin Wells <kevin.wells at nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_UNCOMPRESS_H
+#define __ASM_ARM_ARCH_UNCOMPRESS_H
+
+#include <linux/io.h>
+
+#include <mach/platform.h>
+
+#if defined(CONFIG_ARCH_LPC32XX_UNCOMP_HSU1) || \
+ defined(CONFIG_ARCH_LPC32XX_UNCOMP_HSU2) || \
+ defined(CONFIG_ARCH_LPC32XX_UNCOMP_HSU7)
+/*
+ * High speed UART uncompress output support
+*/
+#ifdef CONFIG_ARCH_LPC32XX_UNCOMP_HSU1
+#define HS_UARTX_BASE (HS_UART1_BASE)
+#endif
+
+#ifdef CONFIG_ARCH_LPC32XX_UNCOMP_HSU2
+#define HS_UARTX_BASE (HS_UART2_BASE)
+#endif
+
+#ifdef CONFIG_ARCH_LPC32XX_UNCOMP_HSU7
+#define HS_UARTX_BASE (HS_UART7_BASE)
+#endif
+
+#define HSUART_FIFO (HS_UARTX_BASE + 0x00)
+#define HSUART_LEVEL (HS_UARTX_BASE + 0x04)
+
+static inline void putc(int ch)
+{
+ /* Wait for transmit FIFO to empty */
+ while ((readl(HSUART_LEVEL) & 0xFF00) != 0)
+ ;
+ writel((u32) ch, HSUART_FIFO);
+}
+static inline void flush(void)
+{
+ /* Don't see a reset? */
+ /* Then just wait for transmition to complete */
+ while ((readl(HSUART_LEVEL) & 0xFF00) != 0)
+ ;
+}
+
+#else
+/*
+ * Standard UART uncompress output support
+ */
+
+#define UART_FIFO_CTL_TX_RESET (1 << 2)
+#define UART_STATUS_TX_MT (1 << 6)
+
+#ifdef CONFIG_ARCH_LPC32XX_UNCOMP_U3
+#define UARTX_BASE (UART3_BASE)
+#endif
+
+#ifdef CONFIG_ARCH_LPC32XX_UNCOMP_U4
+#define UARTX_BASE (UART4_BASE)
+#endif
+
+#ifdef CONFIG_ARCH_LPC32XX_UNCOMP_U5
+#define UARTX_BASE (UART5_BASE)
+#endif
+
+#ifdef CONFIG_ARCH_LPC32XX_UNCOMP_U6
+#define UARTX_BASE (UART6_BASE)
+#endif
+
+#define UART_DATA (UARTX_BASE + 0x00)
+#define UART_FIFO_CTL (UARTX_BASE + 0x08)
+#define UART_STATUS (UARTX_BASE + 0x14)
+
+static inline void putc(int ch)
+{
+ /* Wait for transmit FIFO to empty */
+ while ((readl(UART_STATUS) & UART_STATUS_TX_MT) == 0)
+ ;
+
+ writel((u32) ch, UART_DATA);
+}
+
+static inline void flush(void)
+{
+ writel(readl(UART_FIFO_CTL) | UART_FIFO_CTL_TX_RESET, UART_FIFO_CTL);
+}
+#endif
+
+/* NULL functions; we don't presently need them */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
+
diff --git a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
new file mode 100644
index 0000000..5efcc96
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/vmalloc.h
+ *
+ * Author: Kevin Wells <kevin.wells at nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+
+#endif
--
1.6.6
More information about the linux-arm-kernel
mailing list