[PATCH] ARM: S3C64XX: Move IRQ support into mach-s3c64xx
Ben Dooks
ben-linux at fluff.org
Tue Jan 26 02:02:57 EST 2010
Move IRQ support to mach-s3c64xx as it is unlikely to be re-used outside
this machine.
Signed-off-by: Ben Dooks <ben-linux at fluff.org>
---
arch/arm/mach-s3c64xx/Makefile | 7 +
arch/arm/mach-s3c64xx/include/mach/entry-macro.S | 2 +-
arch/arm/mach-s3c64xx/include/mach/irqs.h | 210 +++++++++++++++++++-
arch/arm/{plat-s3c64xx => mach-s3c64xx}/irq-eint.c | 0
arch/arm/{plat-s3c64xx => mach-s3c64xx}/irq-pm.c | 0
arch/arm/{plat-s3c64xx => mach-s3c64xx}/irq.c | 0
arch/arm/plat-s3c64xx/Makefile | 3 -
arch/arm/plat-s3c64xx/include/plat/irqs.h | 214 --------------------
8 files changed, 212 insertions(+), 224 deletions(-)
rename arch/arm/{plat-s3c64xx => mach-s3c64xx}/irq-eint.c (100%)
rename arch/arm/{plat-s3c64xx => mach-s3c64xx}/irq-pm.c (100%)
rename arch/arm/{plat-s3c64xx => mach-s3c64xx}/irq.c (100%)
delete mode 100644 arch/arm/plat-s3c64xx/include/plat/irqs.h
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 21ddf6b..103bed4 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -15,10 +15,17 @@ obj- :=
obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
+obj-y += irq.o
+obj-y += irq-eint.o
+
# setup support
obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
+# PM
+
+obj-$(CONFIG_PM) += irq-pm.o
+
# Machine support
obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
index 33a8fe2..dd36260 100644
--- a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
@@ -13,6 +13,6 @@
*/
#include <mach/map.h>
-#include <plat/irqs.h>
+#include <mach/irqs.h>
#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 4c97f9a..44bb3e4 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -1,16 +1,214 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben at simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
- * S3C6400 - IRQ definitions
+ * S3C64XX - IRQ support
*/
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
+#ifndef __ASM_MACH_S3C64XX_IRQS_H
+#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
-#include <plat/irqs.h>
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET (32)
+
+#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
+
+#define IRQ_VIC0_BASE S3C_IRQ(0)
+#define IRQ_VIC1_BASE S3C_IRQ(32)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0 (16)
+#define IRQ_S3CUART_BASE1 (20)
+#define IRQ_S3CUART_BASE2 (24)
+#define IRQ_S3CUART_BASE3 (28)
+
+#define UART_IRQ_RXD (0)
+#define UART_IRQ_ERR (1)
+#define UART_IRQ_TXD (2)
+#define UART_IRQ_MODEM (3)
+
+#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x))
+#define S3C64XX_IRQ_VIC1(x) (IRQ_VIC1_BASE + (x))
+
+/* VIC0 */
+
+#define IRQ_EINT0_3 S3C64XX_IRQ_VIC0(0)
+#define IRQ_EINT4_11 S3C64XX_IRQ_VIC0(1)
+#define IRQ_RTC_TIC S3C64XX_IRQ_VIC0(2)
+#define IRQ_CAMIF_C S3C64XX_IRQ_VIC0(3)
+#define IRQ_CAMIF_P S3C64XX_IRQ_VIC0(4)
+#define IRQ_CAMIF_MC S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIC1 S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIS S3C64XX_IRQ_VIC0(6)
+#define IRQ_S3C6400_CAMIF_MP S3C64XX_IRQ_VIC0(6)
+#define IRQ_CAMIF_WE_C S3C64XX_IRQ_VIC0(7)
+#define IRQ_S3C6410_G3D S3C64XX_IRQ_VIC0(8)
+#define IRQ_S3C6400_CAMIF_WE_P S3C64XX_IRQ_VIC0(8)
+#define IRQ_POST0 S3C64XX_IRQ_VIC0(9)
+#define IRQ_ROTATOR S3C64XX_IRQ_VIC0(10)
+#define IRQ_2D S3C64XX_IRQ_VIC0(11)
+#define IRQ_TVENC S3C64XX_IRQ_VIC0(12)
+#define IRQ_SCALER S3C64XX_IRQ_VIC0(13)
+#define IRQ_BATF S3C64XX_IRQ_VIC0(14)
+#define IRQ_JPEG S3C64XX_IRQ_VIC0(15)
+#define IRQ_MFC S3C64XX_IRQ_VIC0(16)
+#define IRQ_SDMA0 S3C64XX_IRQ_VIC0(17)
+#define IRQ_SDMA1 S3C64XX_IRQ_VIC0(18)
+#define IRQ_ARM_DMAERR S3C64XX_IRQ_VIC0(19)
+#define IRQ_ARM_DMA S3C64XX_IRQ_VIC0(20)
+#define IRQ_ARM_DMAS S3C64XX_IRQ_VIC0(21)
+#define IRQ_KEYPAD S3C64XX_IRQ_VIC0(22)
+#define IRQ_TIMER0_VIC S3C64XX_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC S3C64XX_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC S3C64XX_IRQ_VIC0(25)
+#define IRQ_WDT S3C64XX_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC S3C64XX_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC S3C64XX_IRQ_VIC0(28)
+#define IRQ_LCD_FIFO S3C64XX_IRQ_VIC0(29)
+#define IRQ_LCD_VSYNC S3C64XX_IRQ_VIC0(30)
+#define IRQ_LCD_SYSTEM S3C64XX_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_19 S3C64XX_IRQ_VIC1(0)
+#define IRQ_EINT20_27 S3C64XX_IRQ_VIC1(1)
+#define IRQ_PCM0 S3C64XX_IRQ_VIC1(2)
+#define IRQ_PCM1 S3C64XX_IRQ_VIC1(3)
+#define IRQ_AC97 S3C64XX_IRQ_VIC1(4)
+#define IRQ_UART0 S3C64XX_IRQ_VIC1(5)
+#define IRQ_UART1 S3C64XX_IRQ_VIC1(6)
+#define IRQ_UART2 S3C64XX_IRQ_VIC1(7)
+#define IRQ_UART3 S3C64XX_IRQ_VIC1(8)
+#define IRQ_DMA0 S3C64XX_IRQ_VIC1(9)
+#define IRQ_DMA1 S3C64XX_IRQ_VIC1(10)
+#define IRQ_ONENAND0 S3C64XX_IRQ_VIC1(11)
+#define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12)
+#define IRQ_NFC S3C64XX_IRQ_VIC1(13)
+#define IRQ_CFCON S3C64XX_IRQ_VIC1(14)
+#define IRQ_USBH S3C64XX_IRQ_VIC1(15)
+#define IRQ_SPI0 S3C64XX_IRQ_VIC1(16)
+#define IRQ_SPI1 S3C64XX_IRQ_VIC1(17)
+#define IRQ_IIC S3C64XX_IRQ_VIC1(18)
+#define IRQ_HSItx S3C64XX_IRQ_VIC1(19)
+#define IRQ_HSIrx S3C64XX_IRQ_VIC1(20)
+#define IRQ_RESERVED S3C64XX_IRQ_VIC1(21)
+#define IRQ_MSM S3C64XX_IRQ_VIC1(22)
+#define IRQ_HOSTIF S3C64XX_IRQ_VIC1(23)
+#define IRQ_HSMMC0 S3C64XX_IRQ_VIC1(24)
+#define IRQ_HSMMC1 S3C64XX_IRQ_VIC1(25)
+#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */
+#define IRQ_OTG S3C64XX_IRQ_VIC1(26)
+#define IRQ_IRDA S3C64XX_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM S3C64XX_IRQ_VIC1(28)
+#define IRQ_SEC S3C64XX_IRQ_VIC1(29)
+#define IRQ_PENDN S3C64XX_IRQ_VIC1(30)
+#define IRQ_TC IRQ_PENDN
+#define IRQ_ADC S3C64XX_IRQ_VIC1(31)
+
+#define S3C64XX_TIMER_IRQ(x) S3C_IRQ(64 + (x))
+
+#define IRQ_TIMER0 S3C64XX_TIMER_IRQ(0)
+#define IRQ_TIMER1 S3C64XX_TIMER_IRQ(1)
+#define IRQ_TIMER2 S3C64XX_TIMER_IRQ(2)
+#define IRQ_TIMER3 S3C64XX_TIMER_IRQ(3)
+#define IRQ_TIMER4 S3C64XX_TIMER_IRQ(4)
+
+/* compatibility for device defines */
+
+#define IRQ_IIC1 IRQ_S3C6410_IIC1
+
+/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
+ * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
+ * which we place after the pair of VICs. */
+
+#define S3C_IRQ_EINT_BASE S3C_IRQ(64+5)
+
+#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x) S3C_EINT(x)
+#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0))
+
+/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+#define IRQ_EINT_GROUP1_NR (15)
+#define IRQ_EINT_GROUP2_NR (8)
+#define IRQ_EINT_GROUP3_NR (5)
+#define IRQ_EINT_GROUP4_NR (14)
+#define IRQ_EINT_GROUP5_NR (7)
+#define IRQ_EINT_GROUP6_NR (10)
+#define IRQ_EINT_GROUP7_NR (16)
+#define IRQ_EINT_GROUP8_NR (15)
+#define IRQ_EINT_GROUP9_NR (9)
+
+#define IRQ_EINT_GROUP_BASE S3C_EINT(28)
+#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0x00)
+#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP3_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP4_BASE (IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
+#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
+#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP7_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
+#define IRQ_EINT_GROUP9_BASE (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
+
+#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no))
+
+/* Define a group of interrupts for board-specific use (eg, for MFD
+ * interrupt controllers). */
+#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#define IRQ_BOARD_NR 64
+#else
+#define IRQ_BOARD_NR 16
+#endif
+
+#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS (IRQ_BOARD_END + 1)
+
+#endif /* __ASM_MACH_S3C64XX_IRQS_H */
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-eint.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/irq-eint.c
rename to arch/arm/mach-s3c64xx/irq-eint.c
diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/irq-pm.c
rename to arch/arm/mach-s3c64xx/irq-pm.c
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/irq.c
rename to arch/arm/mach-s3c64xx/irq.c
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 80255a5..3e52dcd 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -15,8 +15,6 @@ obj- :=
obj-y += dev-uart.o
obj-y += dev-rtc.o
obj-y += cpu.o
-obj-y += irq.o
-obj-y += irq-eint.o
obj-y += clock.o
obj-y += gpiolib.o
@@ -30,7 +28,6 @@ obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_PM) += irq-pm.o
# DMA support
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
deleted file mode 100644
index a227581..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/mach/irqs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben at simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Common IRQ support
- */
-
-#ifndef __ASM_PLAT_S3C64XX_IRQS_H
-#define __ASM_PLAT_S3C64XX_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S3C_IRQ_OFFSET (32)
-
-#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
-
-#define IRQ_VIC0_BASE S3C_IRQ(0)
-#define IRQ_VIC1_BASE S3C_IRQ(32)
-
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S3CUART_BASE0 (16)
-#define IRQ_S3CUART_BASE1 (20)
-#define IRQ_S3CUART_BASE2 (24)
-#define IRQ_S3CUART_BASE3 (28)
-
-#define UART_IRQ_RXD (0)
-#define UART_IRQ_ERR (1)
-#define UART_IRQ_TXD (2)
-#define UART_IRQ_MODEM (3)
-
-#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
-
-/* VIC based IRQs */
-
-#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x))
-#define S3C64XX_IRQ_VIC1(x) (IRQ_VIC1_BASE + (x))
-
-/* VIC0 */
-
-#define IRQ_EINT0_3 S3C64XX_IRQ_VIC0(0)
-#define IRQ_EINT4_11 S3C64XX_IRQ_VIC0(1)
-#define IRQ_RTC_TIC S3C64XX_IRQ_VIC0(2)
-#define IRQ_CAMIF_C S3C64XX_IRQ_VIC0(3)
-#define IRQ_CAMIF_P S3C64XX_IRQ_VIC0(4)
-#define IRQ_CAMIF_MC S3C64XX_IRQ_VIC0(5)
-#define IRQ_S3C6410_IIC1 S3C64XX_IRQ_VIC0(5)
-#define IRQ_S3C6410_IIS S3C64XX_IRQ_VIC0(6)
-#define IRQ_S3C6400_CAMIF_MP S3C64XX_IRQ_VIC0(6)
-#define IRQ_CAMIF_WE_C S3C64XX_IRQ_VIC0(7)
-#define IRQ_S3C6410_G3D S3C64XX_IRQ_VIC0(8)
-#define IRQ_S3C6400_CAMIF_WE_P S3C64XX_IRQ_VIC0(8)
-#define IRQ_POST0 S3C64XX_IRQ_VIC0(9)
-#define IRQ_ROTATOR S3C64XX_IRQ_VIC0(10)
-#define IRQ_2D S3C64XX_IRQ_VIC0(11)
-#define IRQ_TVENC S3C64XX_IRQ_VIC0(12)
-#define IRQ_SCALER S3C64XX_IRQ_VIC0(13)
-#define IRQ_BATF S3C64XX_IRQ_VIC0(14)
-#define IRQ_JPEG S3C64XX_IRQ_VIC0(15)
-#define IRQ_MFC S3C64XX_IRQ_VIC0(16)
-#define IRQ_SDMA0 S3C64XX_IRQ_VIC0(17)
-#define IRQ_SDMA1 S3C64XX_IRQ_VIC0(18)
-#define IRQ_ARM_DMAERR S3C64XX_IRQ_VIC0(19)
-#define IRQ_ARM_DMA S3C64XX_IRQ_VIC0(20)
-#define IRQ_ARM_DMAS S3C64XX_IRQ_VIC0(21)
-#define IRQ_KEYPAD S3C64XX_IRQ_VIC0(22)
-#define IRQ_TIMER0_VIC S3C64XX_IRQ_VIC0(23)
-#define IRQ_TIMER1_VIC S3C64XX_IRQ_VIC0(24)
-#define IRQ_TIMER2_VIC S3C64XX_IRQ_VIC0(25)
-#define IRQ_WDT S3C64XX_IRQ_VIC0(26)
-#define IRQ_TIMER3_VIC S3C64XX_IRQ_VIC0(27)
-#define IRQ_TIMER4_VIC S3C64XX_IRQ_VIC0(28)
-#define IRQ_LCD_FIFO S3C64XX_IRQ_VIC0(29)
-#define IRQ_LCD_VSYNC S3C64XX_IRQ_VIC0(30)
-#define IRQ_LCD_SYSTEM S3C64XX_IRQ_VIC0(31)
-
-/* VIC1 */
-
-#define IRQ_EINT12_19 S3C64XX_IRQ_VIC1(0)
-#define IRQ_EINT20_27 S3C64XX_IRQ_VIC1(1)
-#define IRQ_PCM0 S3C64XX_IRQ_VIC1(2)
-#define IRQ_PCM1 S3C64XX_IRQ_VIC1(3)
-#define IRQ_AC97 S3C64XX_IRQ_VIC1(4)
-#define IRQ_UART0 S3C64XX_IRQ_VIC1(5)
-#define IRQ_UART1 S3C64XX_IRQ_VIC1(6)
-#define IRQ_UART2 S3C64XX_IRQ_VIC1(7)
-#define IRQ_UART3 S3C64XX_IRQ_VIC1(8)
-#define IRQ_DMA0 S3C64XX_IRQ_VIC1(9)
-#define IRQ_DMA1 S3C64XX_IRQ_VIC1(10)
-#define IRQ_ONENAND0 S3C64XX_IRQ_VIC1(11)
-#define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12)
-#define IRQ_NFC S3C64XX_IRQ_VIC1(13)
-#define IRQ_CFCON S3C64XX_IRQ_VIC1(14)
-#define IRQ_USBH S3C64XX_IRQ_VIC1(15)
-#define IRQ_SPI0 S3C64XX_IRQ_VIC1(16)
-#define IRQ_SPI1 S3C64XX_IRQ_VIC1(17)
-#define IRQ_IIC S3C64XX_IRQ_VIC1(18)
-#define IRQ_HSItx S3C64XX_IRQ_VIC1(19)
-#define IRQ_HSIrx S3C64XX_IRQ_VIC1(20)
-#define IRQ_RESERVED S3C64XX_IRQ_VIC1(21)
-#define IRQ_MSM S3C64XX_IRQ_VIC1(22)
-#define IRQ_HOSTIF S3C64XX_IRQ_VIC1(23)
-#define IRQ_HSMMC0 S3C64XX_IRQ_VIC1(24)
-#define IRQ_HSMMC1 S3C64XX_IRQ_VIC1(25)
-#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */
-#define IRQ_OTG S3C64XX_IRQ_VIC1(26)
-#define IRQ_IRDA S3C64XX_IRQ_VIC1(27)
-#define IRQ_RTC_ALARM S3C64XX_IRQ_VIC1(28)
-#define IRQ_SEC S3C64XX_IRQ_VIC1(29)
-#define IRQ_PENDN S3C64XX_IRQ_VIC1(30)
-#define IRQ_TC IRQ_PENDN
-#define IRQ_ADC S3C64XX_IRQ_VIC1(31)
-
-#define S3C64XX_TIMER_IRQ(x) S3C_IRQ(64 + (x))
-
-#define IRQ_TIMER0 S3C64XX_TIMER_IRQ(0)
-#define IRQ_TIMER1 S3C64XX_TIMER_IRQ(1)
-#define IRQ_TIMER2 S3C64XX_TIMER_IRQ(2)
-#define IRQ_TIMER3 S3C64XX_TIMER_IRQ(3)
-#define IRQ_TIMER4 S3C64XX_TIMER_IRQ(4)
-
-/* compatibility for device defines */
-
-#define IRQ_IIC1 IRQ_S3C6410_IIC1
-
-/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
- * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
- * which we place after the pair of VICs. */
-
-#define S3C_IRQ_EINT_BASE S3C_IRQ(64+5)
-
-#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
-#define IRQ_EINT(x) S3C_EINT(x)
-#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0))
-
-/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
- * that they are sourced from the GPIO pins but with a different scheme for
- * priority and source indication.
- *
- * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
- * interrupts, but for historical reasons they are kept apart from these
- * next interrupts.
- *
- * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
- * machine specific support files.
- */
-
-#define IRQ_EINT_GROUP1_NR (15)
-#define IRQ_EINT_GROUP2_NR (8)
-#define IRQ_EINT_GROUP3_NR (5)
-#define IRQ_EINT_GROUP4_NR (14)
-#define IRQ_EINT_GROUP5_NR (7)
-#define IRQ_EINT_GROUP6_NR (10)
-#define IRQ_EINT_GROUP7_NR (16)
-#define IRQ_EINT_GROUP8_NR (15)
-#define IRQ_EINT_GROUP9_NR (9)
-
-#define IRQ_EINT_GROUP_BASE S3C_EINT(28)
-#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0x00)
-#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
-#define IRQ_EINT_GROUP3_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
-#define IRQ_EINT_GROUP4_BASE (IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
-#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
-#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
-#define IRQ_EINT_GROUP7_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
-#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
-#define IRQ_EINT_GROUP9_BASE (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
-
-#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no))
-
-/* Define a group of interrupts for board-specific use (eg, for MFD
- * interrupt controllers). */
-#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-#define IRQ_BOARD_NR 64
-#else
-#define IRQ_BOARD_NR 16
-#endif
-
-#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS (IRQ_BOARD_END + 1)
-
-#endif /* __ASM_PLAT_S3C64XX_IRQS_H */
-
--
1.6.0.4
More information about the linux-arm-kernel
mailing list