[PATCH] ARM: S3C64XX: SPI: Make platform device build selectable

[jassisinghbrar at gmail.com]

From: Jassi Brar <jassi.brar at samsung.com>

The SPI controller platform devices should be compiled in independent of 
the driver support, otherwise we might end up with dev-spi built as kernel
module.
Change this to make every machine select if it has some SPI device and wants
to build in SPI platform device definitions.

Signed-off-by: Jassi Brar <jassi.brar at samsung.com>
---
 arch/arm/plat-s3c64xx/Makefile |    2 +-
 arch/arm/plat-samsung/Kconfig  |    5 +++++
 2 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 80255a5..9838550 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -47,4 +47,4 @@ obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
 obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
 obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
-obj-$(CONFIG_SPI_S3C64XX) += dev-spi.o
+obj-$(CONFIG_S3C_DEV_SPI) += dev-spi.o
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 1c2fe91..2220187 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -132,6 +132,11 @@ config S3C_DEV_NAND
 	help
 	  Compile in platform device definition for NAND controller
 
+config S3C_DEV_SPI
+	bool
+	help
+	  Compile in platform device definition for SPI controller
+
 comment "Power management"
 
 config SAMSUNG_PM_DEBUG
-- 
1.6.2.5