[PATCH - 3rd attempt] ARM: Support for Embedian MXM-8x10 eval kit
Edwin Peer
epeer at tmtservices.co.za
Mon Jan 18 14:34:14 EST 2010
Dear Russell, Eric,
I believe we have finally managed to address all your review points - third time's a charm. :)
Here's the diffstat against 2.6.33-rc4:
Kconfig | 5
Makefile | 1
capc7117.c | 157 ++++++++++++++++
include/mach/mxm8x10.h | 21 ++
mxm8x10.c | 480 +++++++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 664 insertions(+)
Please consider for inclusion again.
Thank you.
Regards,
Edwin Peer
Add support for the Embedian MXM-8x10 evaluation kit.
Product URL: http://www.embedian.com/index.php?main_page=product_info&cPath=68&products_id=229
Signed-off-by: Edwin Peer <epeer at tmtservices.co.za>
---
Files linux-2.6.33-rc4/arch/arm/boot/compressed/piggy.gzip and linux-embedian-2.6.33-rc4/arch/arm/boot/compressed/piggy.gzip differ
diff -Nurp linux-2.6.33-rc4/arch/arm/mach-pxa/Kconfig linux-embedian-2.6.33-rc4/arch/arm/mach-pxa/Kconfig
--- linux-2.6.33-rc4/arch/arm/mach-pxa/Kconfig 2010-01-18 18:54:32.000000000 +0200
+++ linux-embedian-2.6.33-rc4/arch/arm/mach-pxa/Kconfig 2010-01-13 17:00:13.000000000 +0200
@@ -115,6 +115,11 @@ config MACH_CM_X300
select CPU_PXA310
select HAVE_PWM
+config MACH_CAPC7117
+ bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
+ select CPU_PXA320
+ select PXA3xx
+
config ARCH_GUMSTIX
bool "Gumstix XScale 255 boards"
select PXA25x
diff -Nurp linux-2.6.33-rc4/arch/arm/mach-pxa/Makefile linux-embedian-2.6.33-rc4/arch/arm/mach-pxa/Makefile
--- linux-2.6.33-rc4/arch/arm/mach-pxa/Makefile 2010-01-18 18:54:32.000000000 +0200
+++ linux-embedian-2.6.33-rc4/arch/arm/mach-pxa/Makefile 2010-01-13 17:00:13.000000000 +0200
@@ -48,6 +48,7 @@ obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pc
endif
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
+obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
diff -Nurp linux-2.6.33-rc4/arch/arm/mach-pxa/capc7117.c linux-embedian-2.6.33-rc4/arch/arm/mach-pxa/capc7117.c
--- linux-2.6.33-rc4/arch/arm/mach-pxa/capc7117.c 1970-01-01 02:00:00.000000000 +0200
+++ linux-embedian-2.6.33-rc4/arch/arm/mach-pxa/capc7117.c 2010-01-18 19:16:42.000000000 +0200
@@ -0,0 +1,157 @@
+/*
+ * linux/arch/arm/mach-pxa/capc7117.c
+ *
+ * Support for the Embedian CAPC-7117 Evaluation Kit
+ * based on the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao at gmail.com>
+ * rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer at tmtservices.co.za>
+ * Hennie van der Merwe <hvdmerwe at tmtservices.co.za>
+ * rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/gpio.h>
+#include <mach/pxa320.h>
+#include <mach/mxm8x10.h>
+
+#include "generic.h"
+
+/* IDE (PATA) Support */
+static struct pata_platform_info pata_platform_data = {
+ .ioport_shift = 1
+};
+
+static struct resource capc7117_ide_resources[] = {
+ [0] = {
+ .start = 0x11000020,
+ .end = 0x1100003f,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = 0x1100001c,
+ .end = 0x1100001c,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+ .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
+ }
+};
+
+struct platform_device capc7117_ide_device = {
+ .name = "pata_platform",
+ .num_resources = ARRAY_SIZE(capc7117_ide_resources),
+ .resource = capc7117_ide_resources,
+ .dev = {
+ .platform_data = &pata_platform_data,
+ .coherent_dma_mask = ~0 /* grumble */
+ }
+};
+
+static void __init capc7117_ide_init(void)
+{
+ platform_device_register(&capc7117_ide_device);
+}
+
+/* TI16C752 UART support */
+#define TI16C752_FLAGS (UPF_BOOT_AUTOCONF | \
+ UPF_IOREMAP | \
+ UPF_BUGGY_UART | \
+ UPF_SKIP_TEST)
+#define TI16C752_UARTCLK (22118400)
+static struct plat_serial8250_port ti16c752_platform_data[] = {
+ [0] = {
+ .mapbase = 0x14000000,
+ .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .flags = TI16C752_FLAGS,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = TI16C752_UARTCLK
+ },
+ [1] = {
+ .mapbase = 0x14000040,
+ .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .flags = TI16C752_FLAGS,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = TI16C752_UARTCLK
+ },
+ [2] = {
+ .mapbase = 0x14000080,
+ .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .flags = TI16C752_FLAGS,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = TI16C752_UARTCLK
+ },
+ [3] = {
+ .mapbase = 0x140000c0,
+ .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .flags = TI16C752_FLAGS,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = TI16C752_UARTCLK
+ },
+ [4] = {
+ /* end of array */
+ }
+};
+
+static struct platform_device ti16c752_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = ti16c752_platform_data
+ }
+};
+
+static void __init capc7117_uarts_init(void)
+{
+ platform_device_register(&ti16c752_device);
+}
+
+static void __init capc7117_init(void)
+{
+ /* Init CoM */
+ mxm_8x10_barebones_init();
+
+ /* Init evaluation board peripherals */
+ mxm_8x10_ac97_init();
+ mxm_8x10_usb_host_init();
+ mxm_8x10_mmc_init();
+
+ capc7117_uarts_init();
+ capc7117_ide_init();
+}
+
+MACHINE_START(CAPC7117,
+ "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = capc7117_init
+MACHINE_END
diff -Nurp linux-2.6.33-rc4/arch/arm/mach-pxa/include/mach/mxm8x10.h linux-embedian-2.6.33-rc4/arch/arm/mach-pxa/include/mach/mxm8x10.h
--- linux-2.6.33-rc4/arch/arm/mach-pxa/include/mach/mxm8x10.h 1970-01-01 02:00:00.000000000 +0200
+++ linux-embedian-2.6.33-rc4/arch/arm/mach-pxa/include/mach/mxm8x10.h 2010-01-18 19:16:11.000000000 +0200
@@ -0,0 +1,21 @@
+#ifndef __MACH_MXM_8X10_H
+#define __MACH_MXM_8X10_H
+
+#define MXM_8X10_ETH_PHYS 0x13000000
+
+#define NAND_MMIO_START 0x43100000
+#define NAND_MMIO_END 0x43100080
+
+#define EXT_GPIO(x) (128 + (x))
+
+extern void mxm_8x10_mmc_init(void);
+extern void mxm_8x10_usb_host_init(void);
+extern void mxm_8x10_ac97_init(void);
+extern void mxm_8x10_nand_init(void);
+extern void mxm_8x10_ethernet_init(void);
+extern void mxm_8x10_uart_init(void);
+extern void mxm_8x10_i2c_init(void);
+
+extern void mxm_8x10_barebones_init(void);
+
+#endif /* __MACH_MXM_8X10_H */
diff -Nurp linux-2.6.33-rc4/arch/arm/mach-pxa/mxm8x10.c linux-embedian-2.6.33-rc4/arch/arm/mach-pxa/mxm8x10.c
--- linux-2.6.33-rc4/arch/arm/mach-pxa/mxm8x10.c 1970-01-01 02:00:00.000000000 +0200
+++ linux-embedian-2.6.33-rc4/arch/arm/mach-pxa/mxm8x10.c 2010-01-18 21:21:32.000000000 +0200
@@ -0,0 +1,480 @@
+/*
+ * linux/arch/arm/mach-pxa/mxm8x10.c
+ *
+ * Support for the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao at gmail.com>
+ * rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer at tmtservices.co.za>
+ * Hennie van der Merwe <hvdmerwe at tmtservices.co.za>
+ * rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_8250.h>
+#include <linux/dm9000.h>
+#include <linux/gpio.h>
+
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
+
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa320.h>
+
+#include <mach/mxm8x10.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* GPIO pin definition
+
+External device stuff - Leave unconfigured for now...
+---------------------
+GPIO0 - DREQ (External DMA Request)
+GPIO3 - nGCS2 (External Chip Select) Where is nGCS0; nGCS1; nGCS4; nGCS5 ?
+GPIO4 - nGCS3
+GPIO15 - EXT_GPIO1
+GPIO16 - EXT_GPIO2
+GPIO17 - EXT_GPIO3
+GPIO24 - EXT_GPIO4
+GPIO25 - EXT_GPIO5
+GPIO26 - EXT_GPIO6
+GPIO27 - EXT_GPIO7
+GPIO28 - EXT_GPIO8
+GPIO29 - EXT_GPIO9
+GPIO30 - EXT_GPIO10
+GPIO31 - EXT_GPIO11
+GPIO57 - EXT_GPIO12
+GPIO74 - EXT_IRQ1
+GPIO75 - EXT_IRQ2
+GPIO76 - EXT_IRQ3
+GPIO77 - EXT_IRQ4
+GPIO78 - EXT_IRQ5
+GPIO79 - EXT_IRQ6
+GPIO80 - EXT_IRQ7
+GPIO81 - EXT_IRQ8
+GPIO87 - VCCIO_PWREN (External Device PWREN)
+
+Dallas 1-Wire - Leave unconfigured for now...
+-------------
+GPIO0_2 - DS - 1Wire
+
+Ethernet
+--------
+GPIO1 - DM9000 PWR
+GPIO9 - DM9K_nIRQ
+GPIO36 - DM9K_RESET
+
+Keypad - Leave unconfigured by for now...
+------
+GPIO1_2 - KP_DKIN0
+GPIO5_2 - KP_MKOUT7
+GPIO82 - KP_DKIN1
+GPIO85 - KP_DKIN2
+GPIO86 - KP_DKIN3
+GPIO113 - KP_MKIN0
+GPIO114 - KP_MKIN1
+GPIO115 - KP_MKIN2
+GPIO116 - KP_MKIN3
+GPIO117 - KP_MKIN4
+GPIO118 - KP_MKIN5
+GPIO119 - KP_MKIN6
+GPIO120 - KP_MKIN7
+GPIO121 - KP_MKOUT0
+GPIO122 - KP_MKOUT1
+GPIO122 - KP_MKOUT2
+GPIO123 - KP_MKOUT3
+GPIO124 - KP_MKOUT4
+GPIO125 - KP_MKOUT5
+GPIO127 - KP_MKOUT6
+
+Data Bus - Leave unconfigured for now...
+--------
+GPIO2 - nWait (Data Bus)
+
+USB Device
+----------
+GPIO4_2 - USBD_PULLUP
+GPIO10 - UTM_CLK (USB Device UTM Clk)
+GPIO49 - USB 2.0 Device UTM_DATA0
+GPIO50 - USB 2.0 Device UTM_DATA1
+GPIO51 - USB 2.0 Device UTM_DATA2
+GPIO52 - USB 2.0 Device UTM_DATA3
+GPIO53 - USB 2.0 Device UTM_DATA4
+GPIO54 - USB 2.0 Device UTM_DATA5
+GPIO55 - USB 2.0 Device UTM_DATA6
+GPIO56 - USB 2.0 Device UTM_DATA7
+GPIO58 - UTM_RXVALID (USB 2.0 Device)
+GPIO59 - UTM_RXACTIVE (USB 2.0 Device)
+GPIO60 - UTM_RXERROR
+GPIO61 - UTM_OPMODE0
+GPIO62 - UTM_OPMODE1
+GPIO71 - USBD_INT (USB Device?)
+GPIO73 - UTM_TXREADY (USB 2.0 Device)
+GPIO83 - UTM_TXVALID (USB 2.0 Device)
+GPIO98 - UTM_RESET (USB 2.0 device)
+GPIO99 - UTM_XCVR_SELECT
+GPIO100 - UTM_TERM_SELECT
+GPIO101 - UTM_SUSPENDM_X
+GPIO102 - UTM_LINESTATE0
+GPIO103 - UTM_LINESTATE1
+
+Card-Bus Interface - Leave unconfigured for now...
+------------------
+GPIO5 - nPIOR (I/O space output enable)
+GPIO6 - nPIOW (I/O space write enable)
+GPIO7 - nIOS16 (Input from I/O space telling size of data bus)
+GPIO8 - nPWAIT (Input for inserting wait states)
+
+LCD
+---
+GPIO6_2 - LDD0
+GPIO7_2 - LDD1
+GPIO8_2 - LDD2
+GPIO9_2 - LDD3
+GPIO11_2 - LDD5
+GPIO12_2 - LDD6
+GPIO13_2 - LDD7
+GPIO14_2 - VSYNC
+GPIO15_2 - HSYNC
+GPIO16_2 - VCLK
+GPIO17_2 - HCLK
+GPIO18_2 - VDEN
+GPIO63 - LDD8 (CPU LCD)
+GPIO64 - LDD9 (CPU LCD)
+GPIO65 - LDD10 (CPU LCD)
+GPIO66 - LDD11 (CPU LCD)
+GPIO67 - LDD12 (CPU LCD)
+GPIO68 - LDD13 (CPU LCD)
+GPIO69 - LDD14 (CPU LCD)
+GPIO70 - LDD15 (CPU LCD)
+GPIO88 - VCCLCD_PWREN (LCD Panel PWREN)
+GPIO97 - BACKLIGHT_EN
+GPIO104 - LCD_PWREN
+
+PWM - Leave unconfigured for now...
+---
+GPIO11 - PWM0
+GPIO12 - PWM1
+GPIO13 - PWM2
+GPIO14 - PWM3
+
+SD-CARD
+-------
+GPIO18 - SDDATA0
+GPIO19 - SDDATA1
+GPIO20 - SDDATA2
+GPIO21 - SDDATA3
+GPIO22 - SDCLK
+GPIO23 - SDCMD
+GPIO72 - SD_WP
+GPIO84 - SD_nIRQ_CD (SD-Card)
+
+I2C
+---
+GPIO32 - I2CSCL
+GPIO33 - I2CSDA
+
+AC97
+----
+GPIO35 - AC97_SDATA_IN
+GPIO37 - AC97_SDATA_OUT
+GPIO38 - AC97_SYNC
+GPIO39 - AC97_BITCLK
+GPIO40 - AC97_nRESET
+
+UART1
+-----
+GPIO41 - UART_RXD1
+GPIO42 - UART_TXD1
+GPIO43 - UART_CTS1
+GPIO44 - UART_DCD1
+GPIO45 - UART_DSR1
+GPIO46 - UART_nRI1
+GPIO47 - UART_DTR1
+GPIO48 - UART_RTS1
+
+UART2
+-----
+GPIO109 - RTS2
+GPIO110 - RXD2
+GPIO111 - TXD2
+GPIO112 - nCTS2
+
+UART3
+-----
+GPIO105 - nCTS3
+GPIO106 - nRTS3
+GPIO107 - TXD3
+GPIO108 - RXD3
+
+SSP3 - Leave unconfigured for now...
+----
+GPIO89 - SSP3_CLK
+GPIO90 - SSP3_SFRM
+GPIO91 - SSP3_TXD
+GPIO92 - SSP3_RXD
+
+SSP4
+GPIO93 - SSP4_CLK
+GPIO94 - SSP4_SFRM
+GPIO95 - SSP4_TXD
+GPIO96 - SSP4_RXD
+*/
+
+static mfp_cfg_t mfp_cfg[] __initdata = {
+ /* USB */
+ GPIO10_UTM_CLK,
+ GPIO49_U2D_PHYDATA_0,
+ GPIO50_U2D_PHYDATA_1,
+ GPIO51_U2D_PHYDATA_2,
+ GPIO52_U2D_PHYDATA_3,
+ GPIO53_U2D_PHYDATA_4,
+ GPIO54_U2D_PHYDATA_5,
+ GPIO55_U2D_PHYDATA_6,
+ GPIO56_U2D_PHYDATA_7,
+ GPIO58_UTM_RXVALID,
+ GPIO59_UTM_RXACTIVE,
+ GPIO60_U2D_RXERROR,
+ GPIO61_U2D_OPMODE0,
+ GPIO62_U2D_OPMODE1,
+ GPIO71_GPIO, /* USBD_INT */
+ GPIO73_UTM_TXREADY,
+ GPIO83_U2D_TXVALID,
+ GPIO98_U2D_RESET,
+ GPIO99_U2D_XCVR_SEL,
+ GPIO100_U2D_TERM_SEL,
+ GPIO101_U2D_SUSPEND,
+ GPIO102_UTM_LINESTATE_0,
+ GPIO103_UTM_LINESTATE_1,
+ GPIO4_2_GPIO | MFP_PULL_HIGH, /* UTM_PULLUP */
+
+ /* DM9000 */
+ GPIO1_GPIO,
+ GPIO9_GPIO,
+ GPIO36_GPIO,
+
+ /* AC97 */
+ GPIO35_AC97_SDATA_IN_0,
+ GPIO37_AC97_SDATA_OUT,
+ GPIO38_AC97_SYNC,
+ GPIO39_AC97_BITCLK,
+ GPIO40_AC97_nACRESET,
+
+ /* UARTS */
+ GPIO41_UART1_RXD,
+ GPIO42_UART1_TXD,
+ GPIO43_UART1_CTS,
+ GPIO44_UART1_DCD,
+ GPIO45_UART1_DSR,
+ GPIO46_UART1_RI,
+ GPIO47_UART1_DTR,
+ GPIO48_UART1_RTS,
+
+ GPIO109_UART2_RTS,
+ GPIO110_UART2_RXD,
+ GPIO111_UART2_TXD,
+ GPIO112_UART2_CTS,
+
+ GPIO105_UART3_CTS,
+ GPIO106_UART3_RTS,
+ GPIO107_UART3_TXD,
+ GPIO108_UART3_RXD,
+
+ GPIO78_GPIO,
+ GPIO79_GPIO,
+ GPIO80_GPIO,
+ GPIO81_GPIO,
+
+ /* I2C */
+ GPIO32_I2C_SCL,
+ GPIO33_I2C_SDA,
+
+ /* MMC */
+ GPIO18_MMC1_DAT0,
+ GPIO19_MMC1_DAT1,
+ GPIO20_MMC1_DAT2,
+ GPIO21_MMC1_DAT3,
+ GPIO22_MMC1_CLK,
+ GPIO23_MMC1_CMD,
+ GPIO72_GPIO,
+ GPIO84_GPIO,
+
+ /* IRQ */
+ GPIO74_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ1 */
+ GPIO75_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ2 */
+ GPIO76_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ3 */
+ GPIO77_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ4 */
+ GPIO78_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ5 */
+ GPIO79_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ6 */
+ GPIO80_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ7 */
+ GPIO81_GPIO | MFP_LPM_EDGE_RISE /* EXT_IRQ8 */
+};
+
+/* MMC/MCI Support */
+#if defined(CONFIG_MMC)
+static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = EXT_GPIO(72),
+ .gpio_card_ro = EXT_GPIO(84),
+ .gpio_power = -1
+};
+
+void __init mxm_8x10_mmc_init(void)
+{
+ pxa_set_mci_info(&mxm_8x10_mci_platform_data);
+}
+#else
+inline void mxm_8x10_mmc_init(void)
+{
+}
+#endif
+
+/* USB Open Host Controler Interface */
+static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
+ .port_mode = PMM_NPS_MODE,
+ .flags = ENABLE_PORT_ALL
+};
+
+void __init mxm_8x10_usb_host_init(void)
+{
+ pxa_set_ohci_info(&mxm_8x10_ohci_platform_data);
+}
+
+/* AC97 Sound Support */
+static struct platform_device mxm_8x10_ac97_device = {
+ .name = "pxa2xx-ac97"
+};
+
+void __init mxm_8x10_ac97_init(void)
+{
+ platform_device_register(&mxm_8x10_ac97_device);
+}
+
+/* NAND flash Support */
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#define NAND_BLOCK_SIZE SZ_128K
+#define NB(x) (NAND_BLOCK_SIZE * (x))
+struct mtd_partition mxm_8x10_nand_partitions[] = {
+ [0] = {
+ .name = "boot",
+ .size = NB(0x002),
+ .offset = NB(0x000),
+ .mask_flags = MTD_WRITEABLE
+ },
+ [1] = {
+ .name = "kernel",
+ .size = NB(0x010),
+ .offset = NB(0x002),
+ .mask_flags = MTD_WRITEABLE
+ },
+ [2] = {
+ .name = "root",
+ .size = NB(0x36c),
+ .offset = NB(0x012)
+ },
+ [3] = {
+ .name = "bbt",
+ .size = NB(0x082),
+ .offset = NB(0x37e),
+ .mask_flags = MTD_WRITEABLE
+ }
+};
+
+static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
+ .enable_arbiter = 1,
+ .keep_config = 1,
+ .parts = mxm_8x10_nand_partitions,
+ .nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions)
+};
+
+void __init mxm_8x10_nand_init(void)
+{
+ pxa3xx_set_nand_info(&mxm_8x10_nand_info);
+}
+#else
+inline mxm_8x10_nand_init(void)
+{
+}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
+/* Ethernet support: Davicom DM9000 */
+static struct resource dm9k_resources[] = {
+ [0] = {
+ .start = MXM_8X10_ETH_PHYS + 0x300,
+ .end = MXM_8X10_ETH_PHYS + 0x300,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = MXM_8X10_ETH_PHYS + 0x308,
+ .end = MXM_8X10_ETH_PHYS + 0x308,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+ .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
+ }
+};
+
+static struct dm9000_plat_data dm9k_plat_data = {
+ .flags = DM9000_PLATF_16BITONLY
+};
+
+static struct platform_device dm9k_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm9k_resources),
+ .resource = dm9k_resources,
+ .dev = {
+ .platform_data = &dm9k_plat_data
+ }
+};
+
+void __init mxm_8x10_ethernet_init(void)
+{
+ platform_device_register(&dm9k_device);
+}
+
+/* PXA UARTs */
+static void __init mxm_8x10_uarts_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+}
+
+/* I2C and Real Time Clock */
+static struct i2c_board_info __initdata mxm_8x10_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68)
+ }
+};
+
+void __init mxm_8x10_i2c_init(void)
+{
+ i2c_register_board_info(0, mxm_8x10_i2c_devices,
+ ARRAY_SIZE(mxm_8x10_i2c_devices));
+ pxa_set_i2c_info(NULL);
+}
+
+void __init mxm_8x10_barebones_init(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
+
+ mxm_8x10_uarts_init();
+ mxm_8x10_nand_init();
+ mxm_8x10_i2c_init();
+ mxm_8x10_ethernet_init();
+}
More information about the linux-arm-kernel
mailing list