[PATCH v3 1/9] ARM: S5PV210: Add Samsung S5PV210 CPU support
Kukjin Kim
kgene.kim at samsung.com
Thu Jan 21 19:16:58 EST 2010
This patch adds support for Samsung S5PV210 CPU. This patch also adds
an entry for S5PV210 cpu in plat-s5p cpu table.
Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
---
arch/arm/mach-s5pv210/Kconfig | 74 ++++++++++++
arch/arm/mach-s5pv210/Makefile | 22 ++++
arch/arm/mach-s5pv210/Makefile.boot | 2 +
arch/arm/mach-s5pv210/cpu.c | 126 +++++++++++++++++++++
arch/arm/mach-s5pv210/include/mach/debug-macro.S | 39 +++++++
arch/arm/mach-s5pv210/include/mach/entry-macro.S | 54 +++++++++
arch/arm/mach-s5pv210/include/mach/gpio.h | 129 ++++++++++++++++++++++
arch/arm/mach-s5pv210/include/mach/hardware.h | 18 +++
arch/arm/mach-s5pv210/include/mach/map.h | 98 ++++++++++++++++
arch/arm/mach-s5pv210/include/mach/memory.h | 24 ++++
arch/arm/mach-s5pv210/include/mach/system.h | 26 +++++
arch/arm/mach-s5pv210/include/mach/uncompress.h | 24 ++++
arch/arm/mach-s5pv210/s5pv210-init.c | 44 ++++++++
arch/arm/plat-s5p/cpu.c | 15 +++
arch/arm/plat-s5p/include/plat/s5pv210.h | 37 ++++++
15 files changed, 731 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-s5pv210/Kconfig
create mode 100644 arch/arm/mach-s5pv210/Makefile
create mode 100644 arch/arm/mach-s5pv210/Makefile.boot
create mode 100644 arch/arm/mach-s5pv210/cpu.c
create mode 100644 arch/arm/mach-s5pv210/include/mach/debug-macro.S
create mode 100644 arch/arm/mach-s5pv210/include/mach/entry-macro.S
create mode 100644 arch/arm/mach-s5pv210/include/mach/gpio.h
create mode 100644 arch/arm/mach-s5pv210/include/mach/hardware.h
create mode 100644 arch/arm/mach-s5pv210/include/mach/map.h
create mode 100644 arch/arm/mach-s5pv210/include/mach/memory.h
create mode 100644 arch/arm/mach-s5pv210/include/mach/system.h
create mode 100644 arch/arm/mach-s5pv210/include/mach/uncompress.h
create mode 100644 arch/arm/mach-s5pv210/s5pv210-init.c
create mode 100644 arch/arm/plat-s5p/include/plat/s5pv210.h
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
new file mode 100644
index 0000000..8681ddf
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -0,0 +1,74 @@
+# arch/arm/mach-s5pv210/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PV210/S5PC110
+
+if ARCH_S5PV210
+
+config CPU_S5PV210
+ bool
+ select PLAT_S5P
+ select CPU_S5PV210_INIT
+ select CPU_S5PV210_CLOCK
+ help
+ Enable S5PV210 CPU support
+
+config CPU_S5PV210_INIT
+ bool
+ help
+ Initialization code for the S5PV210
+
+config CPU_S5PV210_CLOCK
+ bool
+ help
+ Clock support code for the S5PV210
+
+choice
+ prompt "Select machine type"
+ depends on ARCH_S5PV210
+ default MACH_SMDKV210
+
+config MACH_SMDKV210
+ bool "SMDKV210"
+ select CPU_S5PV210
+ select ARCH_SPARSEMEM_ENABLE
+ help
+ Machine support for Samsung SMDKV210
+
+config MACH_SMDKC110
+ bool "SMDKC110"
+ select CPU_S5PV210
+ select ARCH_SPARSEMEM_ENABLE
+ help
+ Machine support for Samsung SMDKC110
+ S5PC110(MCP) is one of package option of S5PV210
+
+endchoice
+
+choice
+ prompt "Setup CPU Type for S5PC110"
+ depends on MACH_SMDKC110
+ default S5PC110_B_TYPE
+
+config S5PC110_B_TYPE
+ bool "select B-Type"
+ help
+ Select B-Type S5PC110 CPU
+
+config S5PC110_D_TYPE
+ bool "select D-Type"
+ help
+ Select D-Type S5PC110 CPU
+
+config S5PC110_H_TYPE
+ bool "Select H-Type"
+ help
+ Select H-Type S5PC110 CPU
+
+endchoice
+
+endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
new file mode 100644
index 0000000..82a61a5
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -0,0 +1,22 @@
+# arch/arm/mach-s5pv210/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core support for S5PV210 system
+
+obj-$(CONFIG_CPU_S5PV210) += cpu.o
+obj-$(CONFIG_CPU_S5PV210_INIT) += s5pv210-init.o
+obj-$(CONFIG_CPU_S5PV210_CLOCK) += s5pv210-clock.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o
+obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o
diff --git a/arch/arm/mach-s5pv210/Makefile.boot b/arch/arm/mach-s5pv210/Makefile.boot
new file mode 100644
index 0000000..ff90aa1
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y := 0x20008000
+params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
new file mode 100644
index 0000000..3805e3f
--- /dev/null
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -0,0 +1,126 @@
+/* linux/arch/arm/mach-s5pv210/cpu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5pv210.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pv210_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(S5PV210_PA_SYSTIMER),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_VIC2,
+ .pfn = __phys_to_pfn(S5PV210_PA_VIC2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_VIC3,
+ .pfn = __phys_to_pfn(S5PV210_PA_VIC3),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(S5PV210_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }
+};
+
+static void s5pv210_idle(void)
+{
+ if (!need_resched())
+ cpu_do_idle();
+
+ local_irq_enable();
+}
+
+/* s5pv210_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pv210_map_io(void)
+{
+ iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+}
+
+void __init s5pv210_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5pv210_register_clocks();
+ s5pv210_setup_clocks();
+}
+
+void __init s5pv210_init_irq(void)
+{
+ u32 vic[4]; /* S5PV210 supports 4 VIC */
+
+ /* All the VICs are fully populated. */
+ vic[0] = ~0;
+ vic[1] = ~0;
+ vic[2] = ~0;
+ vic[3] = ~0;
+
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+static struct sysdev_class s5pv210_sysclass = {
+ .name = "s5pv210-core",
+};
+
+static struct sys_device s5pv210_sysdev = {
+ .cls = &s5pv210_sysclass,
+};
+
+static int __init s5pv210_core_init(void)
+{
+ return sysdev_class_register(&s5pv210_sysclass);
+}
+
+core_initcall(s5pv210_core_init);
+
+int __init s5pv210_init(void)
+{
+ printk(KERN_INFO "S5PV210: Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = s5pv210_idle;
+
+ return sysdev_register(&s5pv210_sysdev);
+}
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
new file mode 100644
index 0000000..3c568a3
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+ /* note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, = S5P_PA_UART
+ ldrne \rx, = (S5P_VA_UART + S5P_PA_UART & 0xfffff)
+#if CONFIG_DEBUG_S3C_UART != 0
+ add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+ .endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
new file mode 100644
index 0000000..503c1ec
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =S5P_VA_VIC0
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ @ check the vic0
+ mov \irqnr, # S5P_IRQ_OFFSET + 31
+ ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
+ teq \irqstat, #0
+
+ @ otherwise try vic1
+ addeq \tmp, \base, #(S5P_VA_VIC1 - S5P_VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ @ otherwise try vic2
+ addeq \tmp, \base, #(S5P_VA_VIC2 - S5P_VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ @ otherwise try vic3
+ addeq \tmp, \base, #(S5P_VA_VIC3 - S5P_VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
new file mode 100644
index 0000000..533b020
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -0,0 +1,129 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PV210_GPIO_A0_NR (8)
+#define S5PV210_GPIO_A1_NR (4)
+#define S5PV210_GPIO_B_NR (8)
+#define S5PV210_GPIO_C0_NR (5)
+#define S5PV210_GPIO_C1_NR (5)
+#define S5PV210_GPIO_D0_NR (4)
+#define S5PV210_GPIO_D1_NR (6)
+#define S5PV210_GPIO_E0_NR (8)
+#define S5PV210_GPIO_E1_NR (5)
+#define S5PV210_GPIO_F0_NR (8)
+#define S5PV210_GPIO_F1_NR (8)
+#define S5PV210_GPIO_F2_NR (8)
+#define S5PV210_GPIO_F3_NR (6)
+#define S5PV210_GPIO_G0_NR (7)
+#define S5PV210_GPIO_G1_NR (7)
+#define S5PV210_GPIO_G2_NR (7)
+#define S5PV210_GPIO_G3_NR (7)
+#define S5PV210_GPIO_H0_NR (8)
+#define S5PV210_GPIO_H1_NR (8)
+#define S5PV210_GPIO_H2_NR (8)
+#define S5PV210_GPIO_H3_NR (8)
+#define S5PV210_GPIO_I_NR (7)
+#define S5PV210_GPIO_J0_NR (8)
+#define S5PV210_GPIO_J1_NR (6)
+#define S5PV210_GPIO_J2_NR (8)
+#define S5PV210_GPIO_J3_NR (8)
+#define S5PV210_GPIO_J4_NR (5)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PV210_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+ S5PV210_GPIO_A0_START = 0,
+ S5PV210_GPIO_A1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_A0),
+ S5PV210_GPIO_B_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_A1),
+ S5PV210_GPIO_C0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_B),
+ S5PV210_GPIO_C1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_C0),
+ S5PV210_GPIO_D0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_C1),
+ S5PV210_GPIO_D1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_D0),
+ S5PV210_GPIO_E0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_D1),
+ S5PV210_GPIO_E1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_E0),
+ S5PV210_GPIO_F0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_E1),
+ S5PV210_GPIO_F1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F0),
+ S5PV210_GPIO_F2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F1),
+ S5PV210_GPIO_F3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F2),
+ S5PV210_GPIO_G0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F3),
+ S5PV210_GPIO_G1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G0),
+ S5PV210_GPIO_G2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G1),
+ S5PV210_GPIO_G3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G2),
+ S5PV210_GPIO_H0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G3),
+ S5PV210_GPIO_H1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H0),
+ S5PV210_GPIO_H2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H1),
+ S5PV210_GPIO_H3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H2),
+ S5PV210_GPIO_I_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H3),
+ S5PV210_GPIO_J0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_I),
+ S5PV210_GPIO_J1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J0),
+ S5PV210_GPIO_J2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J1),
+ S5PV210_GPIO_J3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J2),
+ S5PV210_GPIO_J4_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J3),
+};
+
+/* S5PV210 GPIO number definitions */
+#define S5PV210_GPA0(_nr) (S5PV210_GPIO_A0_START + (_nr))
+#define S5PV210_GPA1(_nr) (S5PV210_GPIO_A1_START + (_nr))
+#define S5PV210_GPB(_nr) (S5PV210_GPIO_B_START + (_nr))
+#define S5PV210_GPC0(_nr) (S5PV210_GPIO_C0_START + (_nr))
+#define S5PV210_GPC1(_nr) (S5PV210_GPIO_C1_START + (_nr))
+#define S5PV210_GPD0(_nr) (S5PV210_GPIO_D0_START + (_nr))
+#define S5PV210_GPD1(_nr) (S5PV210_GPIO_D1_START + (_nr))
+#define S5PV210_GPE0(_nr) (S5PV210_GPIO_E0_START + (_nr))
+#define S5PV210_GPE1(_nr) (S5PV210_GPIO_E1_START + (_nr))
+#define S5PV210_GPF0(_nr) (S5PV210_GPIO_F0_START + (_nr))
+#define S5PV210_GPF1(_nr) (S5PV210_GPIO_F1_START + (_nr))
+#define S5PV210_GPF2(_nr) (S5PV210_GPIO_F2_START + (_nr))
+#define S5PV210_GPF3(_nr) (S5PV210_GPIO_F3_START + (_nr))
+#define S5PV210_GPG0(_nr) (S5PV210_GPIO_G0_START + (_nr))
+#define S5PV210_GPG1(_nr) (S5PV210_GPIO_G1_START + (_nr))
+#define S5PV210_GPG2(_nr) (S5PV210_GPIO_G2_START + (_nr))
+#define S5PV210_GPG3(_nr) (S5PV210_GPIO_G3_START + (_nr))
+#define S5PV210_GPH0(_nr) (S5PV210_GPIO_H0_START + (_nr))
+#define S5PV210_GPH1(_nr) (S5PV210_GPIO_H1_START + (_nr))
+#define S5PV210_GPH2(_nr) (S5PV210_GPIO_H2_START + (_nr))
+#define S5PV210_GPH3(_nr) (S5PV210_GPIO_H3_START + (_nr))
+#define S5PV210_GPI(_nr) (S5PV210_GPIO_I_START + (_nr))
+#define S5PV210_GPJ0(_nr) (S5PV210_GPIO_J0_START + (_nr))
+#define S5PV210_GPJ1(_nr) (S5PV210_GPIO_J1_START + (_nr))
+#define S5PV210_GPJ2(_nr) (S5PV210_GPIO_J2_START + (_nr))
+#define S5PV210_GPJ3(_nr) (S5PV210_GPIO_J3_START + (_nr))
+#define S5PV210_GPJ4(_nr) (S5PV210_GPIO_J4_START + (_nr))
+
+/* the end of the S5PV210 specific gpios */
+#define S5PV210_GPIO_END (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1)
+#define S3C_GPIO_END S5PV210_GPIO_END
+
+/* define the number of gpios we need to the one after the GPJ4() range */
+#define ARCH_NR_GPIOS (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + \
+ CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/hardware.h b/arch/arm/mach-s5pv210/include/mach/hardware.h
new file mode 100644
index 0000000..fada7a3
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/hardware.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
new file mode 100644
index 0000000..8066681
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+/* Chip ID */
+#define S5PV210_PA_CHIPID (0xE0000000)
+#define S5P_PA_CHIPID S5PV210_PA_CHIPID
+#define S5P_VA_CHIPID S3C_ADDR(0x00700000)
+
+/* SYSCON */
+#define S5PV210_PA_SYSCON (0xE0100000)
+#define S5P_PA_SYSCON S5PV210_PA_SYSCON
+#define S5P_VA_SYSCON S3C_VA_SYS
+
+/* GPIO */
+#define S5PV210_PA_GPIO (0xE0200000)
+#define S5P_PA_GPIO S5PV210_PA_GPIO
+#define S5P_VA_GPIO S3C_ADDR(0x00500000)
+
+/* I2C 0 */
+#define S5PV210_PA_IIC0 (0xE1800000)
+#define S5P_PA_IIC0 S5PV210_PA_IIC0
+
+/* Timer */
+#define S5PV210_PA_TIMER (0xE2500000)
+#define S5P_PA_TIMER S5PV210_PA_TIMER
+#define S5P_VA_TIMER S3C_VA_TIMER
+
+/* SYSTEM TIMER */
+#define S5PV210_PA_SYSTIMER (0xE2600000)
+#define S5P_VA_SYSTIMER S3C_ADDR(0x01200000)
+
+/* UART */
+#define S5PV210_PA_UART (0xE2900000)
+#define S5P_PA_UART S5PV210_PA_UART
+#define S5P_VA_UART S3C_VA_UART
+
+#define S5P_PA_UART0 (S5P_PA_UART + 0x0)
+#define S5P_PA_UART1 (S5P_PA_UART + 0x400)
+#define S5P_PA_UART2 (S5P_PA_UART + 0x800)
+#define S5P_PA_UART3 (S5P_PA_UART + 0xC00)
+#define S5P_UART_OFFSET (0x400)
+
+#define S5P_VA_UARTx(x) (S5P_VA_UART + (S5P_PA_UART & 0xfffff) \
+ + ((x) * S5P_UART_OFFSET))
+
+#define S5P_VA_UART0 S5P_VA_UARTx(0)
+#define S5P_VA_UART1 S5P_VA_UARTx(1)
+#define S5P_VA_UART2 S5P_VA_UARTx(2)
+#define S5P_VA_UART3 S5P_VA_UARTx(3)
+#define S5P_SZ_UART SZ_256
+
+/* SROMC */
+#define S5PV210_PA_SROMC (0xE8000000)
+#define S5P_VA_SROMC S3C_ADDR(0x01100000)
+
+/* VIC 0 */
+#define S5PV210_PA_VIC0 (0xF2000000)
+#define S5P_PA_VIC0 S5PV210_PA_VIC0
+#define S5P_VA_VIC0 (S3C_VA_IRQ + 0x0)
+
+/* VIC 1 */
+#define S5PV210_PA_VIC1 (0xF2100000)
+#define S5P_PA_VIC1 S5PV210_PA_VIC1
+#define S5P_VA_VIC1 (S3C_VA_IRQ + 0x10000)
+
+/* VIC 2 */
+#define S5PV210_PA_VIC2 (0xF2200000)
+#define S5P_VA_VIC2 (S3C_VA_IRQ + 0x20000)
+
+/* VIC 3 */
+#define S5PV210_PA_VIC3 (0xF2300000)
+#define S5P_VA_VIC3 (S3C_VA_IRQ + 0x30000)
+
+/* SDRAM */
+#define S5PV210_PA_SDRAM (0x20000000)
+#define S5P_PA_SDRAM S5PV210_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART S5P_PA_UART
+#define S3C_UART_OFFSET S5P_UART_OFFSET
+#define S3C_PA_TIMER S5P_PA_TIMER
+#define S3C_PA_IIC S5P_PA_IIC0
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
new file mode 100644
index 0000000..763947d
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/memory.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x20000000)
+#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M)
+#define NODE_MEM_SIZE_BITS 28
+
+/* Maximum of 256MiB in one bank */
+#define MAX_PHYSMEM_BITS 32
+#define SECTION_SIZE_BITS 28
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
new file mode 100644
index 0000000..1ca04d5
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/system.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+ /* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ /* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/uncompress.h b/arch/arm/mach-s5pv210/include/mach/uncompress.h
new file mode 100644
index 0000000..08ff2fd
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pv210/s5pv210-init.c b/arch/arm/mach-s5pv210/s5pv210-init.c
new file mode 100644
index 0000000..8f57631
--- /dev/null
+++ b/arch/arm/mach-s5pv210/s5pv210-init.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s5pv210/s5pv210-init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pv210.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = {
+ [0] = {
+ .name = "pclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+};
+
+/* uart registration process */
+void __init s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ struct s3c2410_uartcfg *tcfg = cfg;
+ u32 ucnt;
+
+ for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+ if (!tcfg->clocks) {
+ tcfg->clocks = s5pv210_serial_clocks;
+ tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks);
+ }
+ }
+
+ s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index 0895a77..b322e4c 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -18,10 +18,12 @@
#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/s5p6440.h>
+#include <plat/s5pv210.h>
/* table of supported CPUs */
static const char name_s5p6440[] = "S5P6440";
+static const char name_s5pv210[] = "S5PV210/S5PC110";
static struct cpu_table cpu_ids[] __initdata = {
{
@@ -32,6 +34,14 @@ static struct cpu_table cpu_ids[] __initdata = {
.init_uarts = s5p6440_init_uarts,
.init = s5p6440_init,
.name = name_s5p6440,
+ }, {
+ .idcode = 0x43110000,
+ .idmask = 0xfffff000,
+ .map_io = s5pv210_map_io,
+ .init_clocks = s5pv210_init_clocks,
+ .init_uarts = s5pv210_init_uarts,
+ .init = s5pv210_init,
+ .name = name_s5pv210,
},
};
@@ -41,6 +51,11 @@ static struct cpu_table cpu_ids[] __initdata = {
static struct map_desc s5p_iodesc[] __initdata = {
{
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5P_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
.virtual = (unsigned long)S5P_VA_SYSCON,
.pfn = __phys_to_pfn(S5P_PA_SYSCON),
.length = SZ_64K,
diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-s5p/include/plat/s5pv210.h
new file mode 100644
index 0000000..db1399c
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5pv210.h
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for s5pv210 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PV210 related SoCs */
+
+extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pv210_register_clocks(void);
+extern void s5pv210_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PV210
+
+extern int s5pv210_init(void);
+extern void s5pv210_init_irq(void);
+extern void s5pv210_map_io(void);
+extern void s5pv210_init_clocks(int xtal);
+
+#define s5pv210_init_uarts s5pv210_common_init_uarts
+
+#else
+#define s5pv210_init_clocks NULL
+#define s5pv210_init_uarts NULL
+#define s5pv210_map_io NULL
+#define s5pv210_init NULL
+#endif
+
+/* S5PV210 timer */
+
+extern struct sys_timer s5pv210_timer;
--
1.6.2.5
More information about the linux-arm-kernel
mailing list