[PATCH 08/13] ARM: LPC32XX: clock tree support
wellsk40 at gmail.com
wellsk40 at gmail.com
Wed Jan 27 20:43:26 EST 2010
From: Kevin Wells <wellsk40 at gmail.com>
LPC32XX clock control and query functions
Signed-off-by: Kevin Wells <wellsk40 at gmail.com>
---
arch/arm/mach-lpc32xx/clock.c | 1042 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-lpc32xx/clock.h | 41 ++
2 files changed, 1083 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
new file mode 100644
index 0000000..615c091
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -0,0 +1,1042 @@
+/*
+ * arch/arm/mach-lpc32xx/clock.c
+ *
+ * Author: Kevin Wells <kevin.wells at nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * LPC32xx clock mamagement driver overview
+ *
+ * The LPC32XX contains a number of high level system clocks that can be
+ * generated from different sources. These system clocks are used to
+ * generate the CPU and bus rates and the individual peripheral clocks in
+ * the system. When Linux is started by the boot loader, the system
+ * clocks are already running. Stopping a system clock during normal
+ * Linux operation should never be attempted, as peripherals that require
+ * those clocks will quit working (ie, DRAM).
+ *
+ * The LPC32xx high level clock tree looks as follows. Clocks marked with
+ * an asterisk are always on and cannot be disabled. Clocks marked with
+ * an ampersand can only be disabled in CPU suspend mode. Clocks marked
+ * with a carot are always on if it is the selected clock for the SYSCLK
+ * source. The clock that isn't used for SYSCLK can be enabled and
+ * disabled normally.
+ * 32KHz oscillator*
+ * / | \
+ * RTC* PLL397^ TOUCH
+ * /
+ * Main oscillator^ /
+ * | \ /
+ * | SYSCLK&
+ * | \
+ * | \
+ * USB_PLL HCLK_PLL&
+ * | | |
+ * USB host/device PCLK& |
+ * | |
+ * Peripherals
+ *
+ * The CPU and chip bus rates are derived from the HCLK PLL, which can
+ * generate various clock rates up to 266MHz and beyond. The internal bus
+ * rates (PCLK and HCLK) are generated from dividers based on the HCLK
+ * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate,
+ * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high
+ * level clocks are based on either HCLK or PCLK, but have their own
+ * dividers as part of the IP itself. Because of this, the system clock
+ * rates should not be changed.
+ *
+ * The HCLK PLL is clocked from SYSCLK, which can be derived from the
+ * main oscillator or PLL397. PLL397 generates a rate that is 397 times
+ * the 32KHz oscillator rate. The main oscillator runs at the selected
+ * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate
+ * is normally 13MHz, but depends on the selection of external crystals
+ * or oscillators. If USB operation is required, the main oscillator must
+ * be used in the system.
+ *
+ * Switching SYSCLK between sources during normal Linux operation is not
+ * supported. SYSCLK is preset in the bootloader. Because of the
+ * complexities of clock management during clock frequency changes,
+ * there are some limitations to the clock driver explained below:
+ * - The PLL397 and main oscillator can be enabled and disabled by the
+ * clk_enable() and clk_disable() functions unless SYSCLK is based
+ * on that clock. This allows the other oscillator that isn't driving
+ * the HCLK PLL to be used as another system clock that can be routed
+ * to an external pin.
+ * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with
+ * this driver.
+ * - HCLK and PCLK rates cannot be changed as part of this driver.
+ * - Most peripherals have their own dividers are part of the peripheral
+ * block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates
+ * will also impact the individual peripheral rates.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <mach/clkdev.h>
+#include <mach/platform.h>
+#include "clock.h"
+#include "common.h"
+
+static struct clk clk_armpll;
+static struct clk clk_usbpll;
+
+/*
+ * Post divider values for PLLs based on selected register value
+ */
+const u32 pll_postdivs[4] = {1, 2, 4, 8};
+
+#define USB_OTG_IOBASE io_p2v(USB_BASE)
+
+/* 32KHz clock has a fixed rate and is not stoppable */
+static struct clk osc_32KHz = {
+ .rate = CLOCK_OSC_FREQ,
+};
+
+static int local_pll397_enable(struct clk *clk, int enable)
+{
+ u32 reg;
+ unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+ reg = readl(CLKPWR_PLL397_CTRL(CLKPWR_IOBASE));
+
+ if (enable == 0) {
+ reg |= CLKPWR_SYSCTRL_PLL397_DIS;
+ writel(reg, CLKPWR_PLL397_CTRL(CLKPWR_IOBASE));
+ clk->rate = 0;
+ } else {
+ /* Enable PLL397 */
+ reg &= ~CLKPWR_SYSCTRL_PLL397_DIS;
+ writel(reg, CLKPWR_PLL397_CTRL(CLKPWR_IOBASE));
+ clk->rate = CLOCK_OSC_FREQ * 397;
+
+ /* Wait for PLL397 lock */
+ while (((readl(CLKPWR_PLL397_CTRL(CLKPWR_IOBASE)) &
+ CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
+ (timeout > jiffies))
+ cpu_relax();
+
+ if ((readl(CLKPWR_PLL397_CTRL(CLKPWR_IOBASE)) &
+ CLKPWR_SYSCTRL_PLL397_STS) == 0)
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int local_oscmain_enable(struct clk *clk, int enable)
+{
+ u32 reg;
+ unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+ reg = readl(CLKPWR_MAIN_OSC_CTRL(CLKPWR_IOBASE));
+
+ if (enable == 0) {
+ reg |= CLKPWR_MOSC_DISABLE;
+ writel(reg, CLKPWR_MAIN_OSC_CTRL(CLKPWR_IOBASE));
+ clk->rate = 0;
+ } else {
+ /* Enable main oscillator */
+ reg &= ~CLKPWR_MOSC_DISABLE;
+ writel(reg, CLKPWR_MAIN_OSC_CTRL(CLKPWR_IOBASE));
+ clk->rate = MAIN_OSC_FREQ;
+
+ /* Wait for main oscillator to start */
+ while (((readl(CLKPWR_MAIN_OSC_CTRL(CLKPWR_IOBASE)) &
+ CLKPWR_MOSC_DISABLE) != 0) &&
+ (timeout > jiffies))
+ cpu_relax();
+
+ if ((readl(CLKPWR_MAIN_OSC_CTRL(CLKPWR_IOBASE)) &
+ CLKPWR_MOSC_DISABLE) != 0)
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static struct clk osc_pll397 = {
+ .parent = &osc_32KHz,
+ .enable = &local_pll397_enable,
+ .rate = CLOCK_OSC_FREQ * 397,
+};
+
+static struct clk osc_main = {
+ .enable = &local_oscmain_enable,
+ .rate = MAIN_OSC_FREQ,
+};
+
+static struct clk clk_sys;
+
+/*
+ * Setup the HCLK PLL with a PLL structure
+ */
+static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup)
+{
+ u32 tv, tmp = 0;
+
+ if (PllSetup->analog_on != 0)
+ tmp |= CLKPWR_HCLKPLL_POWER_UP;
+ if (PllSetup->cco_bypass_b15 != 0)
+ tmp |= CLKPWR_HCLKPLL_CCO_BYPASS;
+ if (PllSetup->direct_output_b14 != 0)
+ tmp |= CLKPWR_HCLKPLL_POSTDIV_BYPASS;
+ if (PllSetup->fdbk_div_ctrl_b13 != 0)
+ tmp |= CLKPWR_HCLKPLL_FDBK_SEL_FCLK;
+
+ switch (PllSetup->pll_p) {
+ case 1:
+ tv = 0;
+ break;
+
+ case 2:
+ tv = 1;
+ break;
+
+ case 4:
+ tv = 2;
+ break;
+
+ case 8:
+ tv = 3;
+ break;
+
+ default:
+ return 0;
+ }
+
+ tmp |= CLKPWR_HCLKPLL_POSTDIV_2POW(tv);
+ tmp |= CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1);
+ tmp |= CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1);
+
+ return tmp;
+}
+
+/*
+ * Update the ARM core PLL frequency rate variable from the actual PLL setting
+ */
+static void local_update_armpll_rate(void)
+{
+ u32 clkin, pllreg;
+
+ clkin = clk_armpll.parent->rate;
+ pllreg = readl(CLKPWR_HCLKPLL_CTRL(CLKPWR_IOBASE)) & 0x1FFFF;
+
+ clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg);
+}
+
+static int clkpwr_abs(int v1, int v2)
+{
+ if (v1 > v2)
+ return v1 - v2;
+
+ return v2 - v1;
+}
+
+/*
+ * Find a PLL configuration for the selected input frequency
+ */
+static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq,
+ struct clk_pll_setup *pllsetup)
+{
+ u32 ifreq, freqtol, m, n, p, fclkout = 0;
+ u32 flag = 0, freqret = 0;
+
+ /* Determine frequency tolerance limits */
+ freqtol = target_freq / 250;
+ ifreq = pllin_freq;
+
+ /* Is direct bypass mode possible? */
+ if (clkpwr_abs(pllin_freq, target_freq) <= freqtol) {
+ flag = 1;
+ pllsetup->analog_on = 0;
+ pllsetup->cco_bypass_b15 = 1;
+ pllsetup->direct_output_b14 = 1;
+ pllsetup->fdbk_div_ctrl_b13 = 1;
+ pllsetup->pll_p = pll_postdivs[0];
+ pllsetup->pll_n = 1;
+ pllsetup->pll_m = 1;
+ fclkout = clk_check_pll_setup(ifreq, pllsetup);
+ } else if (target_freq <= ifreq) {
+ pllsetup->analog_on = 0;
+ pllsetup->cco_bypass_b15 = 1;
+ pllsetup->direct_output_b14 = 0;
+ pllsetup->fdbk_div_ctrl_b13 = 1;
+ pllsetup->pll_n = 1;
+ pllsetup->pll_m = 1;
+ for (p = 0; ((p <= 3) && (flag == 0)); p++) {
+ pllsetup->pll_p = pll_postdivs[p];
+ fclkout = clk_check_pll_setup(ifreq, pllsetup);
+ if (clkpwr_abs(target_freq, fclkout) <= freqtol)
+ flag = 1;
+ }
+ }
+
+ /* Is direct mode possible? */
+ if (flag == 0) {
+ pllsetup->analog_on = 1;
+ pllsetup->cco_bypass_b15 = 0;
+ pllsetup->direct_output_b14 = 1;
+ pllsetup->fdbk_div_ctrl_b13 = 0;
+ pllsetup->pll_p = pll_postdivs[0];
+ for (m = 1; ((m <= 256) && (flag == 0)); m++) {
+ for (n = 1; ((n <= 4) && (flag == 0)); n++) {
+ /* Compute output frequency for this value */
+ pllsetup->pll_n = n;
+ pllsetup->pll_m = m;
+ fclkout = clk_check_pll_setup(ifreq,
+ pllsetup);
+ if (clkpwr_abs(target_freq, fclkout) <=
+ freqtol)
+ flag = 1;
+ }
+ }
+ }
+
+ /* Is integer mode possible? */
+ if (flag == 0) {
+ pllsetup->analog_on = 1;
+ pllsetup->cco_bypass_b15 = 0;
+ pllsetup->direct_output_b14 = 0;
+ pllsetup->fdbk_div_ctrl_b13 = 1;
+ for (m = 1; ((m <= 256) && (flag == 0)); m++) {
+ for (n = 1; ((n <= 4) && (flag == 0)); n++) {
+ for (p = 0; ((p < 4) && (flag == 0)); p++) {
+ /* Compute output frequency */
+ pllsetup->pll_p = pll_postdivs[p];
+ pllsetup->pll_n = n;
+ pllsetup->pll_m = m;
+ fclkout = clk_check_pll_setup(
+ ifreq, pllsetup);
+ if (clkpwr_abs(target_freq,
+ fclkout) <= freqtol)
+ flag = 1;
+ }
+ }
+ }
+ }
+
+ if (flag == 0) {
+ /* Try non-integer mode */
+ pllsetup->analog_on = 1;
+ pllsetup->cco_bypass_b15 = 0;
+ pllsetup->direct_output_b14 = 0;
+ pllsetup->fdbk_div_ctrl_b13 = 0;
+ for (m = 1; ((m <= 256) && (flag == 0)); m++) {
+ for (n = 1; ((n <= 4) && (flag == 0)); n++) {
+ for (p = 0; ((p < 4) && (flag == 0)); p++) {
+ /* Compute output frequency */
+ pllsetup->pll_p = pll_postdivs[p];
+ pllsetup->pll_n = n;
+ pllsetup->pll_m = m;
+ fclkout = clk_check_pll_setup(
+ ifreq, pllsetup);
+ if (clkpwr_abs(target_freq,
+ fclkout) <= freqtol)
+ flag = 1;
+ }
+ }
+ }
+ }
+
+ if (flag == 1)
+ freqret = fclkout;
+
+ return freqret;
+}
+
+static struct clk clk_armpll = {
+ .parent = &clk_sys,
+};
+
+/*
+ * Update the USB PLL frequency rate variable from the actual PLL setting
+ */
+static void local_update_usbpll_rate(void)
+{
+ u32 clkin, pllreg;
+
+ clkin = (u32) clk_get_rate(&clk_usbpll);
+ pllreg = readl(CLKPWR_USB_CTRL(CLKPWR_IOBASE)) & 0x1FFFF;
+
+ if ((pllreg & CLKPWR_USBCTRL_PLL_PWRUP) == 0)
+ clk_usbpll.rate = 0;
+ else
+ clk_usbpll.rate = clk_get_pllrate_from_reg(clkin,
+ pllreg);
+}
+
+/*
+ * Setup the USB PLL with a PLL structure
+ */
+static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
+{
+ u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup);
+
+ reg = readl(CLKPWR_USB_CTRL(CLKPWR_IOBASE)) & ~0x1FFFF;
+ reg |= tmp;
+ writel(reg, CLKPWR_USB_CTRL(CLKPWR_IOBASE));
+
+ return clk_check_pll_setup(clk_usbpll.parent->rate,
+ pHCLKPllSetup);
+}
+
+static int local_usbpll_enable(struct clk *clk, int enable)
+{
+ u32 reg;
+ int ret = -ENODEV, qj = (jiffies / 4);
+
+ reg = readl(CLKPWR_USB_CTRL(CLKPWR_IOBASE));
+
+ if (enable == 0) {
+ reg &= ~(CLKPWR_USBCTRL_CLK_EN1 | CLKPWR_USBCTRL_CLK_EN2);
+ writel(reg, CLKPWR_USB_CTRL(CLKPWR_IOBASE));
+ } else if (reg & CLKPWR_USBCTRL_PLL_PWRUP) {
+ reg |= CLKPWR_USBCTRL_CLK_EN1;
+ writel(reg, CLKPWR_USB_CTRL(CLKPWR_IOBASE));
+
+ /* Wait for PLL lock */
+ while (qj < jiffies) {
+ reg = readl(CLKPWR_USB_CTRL(CLKPWR_IOBASE));
+ if (reg & CLKPWR_USBCTRL_PLL_STS)
+ ret = 0;
+ }
+
+ if (ret == 0) {
+ reg |= CLKPWR_USBCTRL_CLK_EN2;
+ writel(reg, CLKPWR_USB_CTRL(CLKPWR_IOBASE));
+ }
+ }
+
+ return ret;
+}
+
+static int local_usbpll_set_rate(struct clk *clk, u32 rate)
+{
+ u32 clkin, reg, usbdiv;
+ struct clk_pll_setup pllsetup;
+
+ /* Unlike other clocks, this clock has a KHz input rate, so bump
+ it up to work with the PLL function */
+ rate = rate * 1000;
+
+ local_usbpll_enable(clk, 0);
+
+ if (rate == 0)
+ return 0;
+
+ clkin = clk->parent->rate;
+ usbdiv = readl(CLKPWR_USBCLK_PDIV(CLKPWR_IOBASE)) + 1;
+ clkin = clkin / usbdiv;
+
+ /* Try to find a good rate setup */
+ if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
+ return -EINVAL;
+
+ reg = readl(CLKPWR_USB_CTRL(CLKPWR_IOBASE));
+ reg |= CLKPWR_USBCTRL_CLK_EN1;
+ writel(reg, CLKPWR_USB_CTRL(CLKPWR_IOBASE));
+
+ pllsetup.analog_on = 1;
+ local_clk_usbpll_setup(&pllsetup);
+
+ clk->rate = clk_check_pll_setup(clkin, &pllsetup);
+
+ reg = readl(CLKPWR_USB_CTRL(CLKPWR_IOBASE));
+ reg |= CLKPWR_USBCTRL_CLK_EN2;
+ writel(reg, CLKPWR_USB_CTRL(CLKPWR_IOBASE));
+
+ return 0;
+}
+
+static struct clk clk_usbpll = {
+ .parent = &osc_main,
+ .set_rate = &local_usbpll_set_rate,
+ .enable = &local_usbpll_enable,
+};
+
+static u32 clk_get_hclk_div(void)
+{
+ static const u32 hclkdivs[4] = {1, 2, 4, 4};
+ return hclkdivs[CLKPWR_HCLKDIV_DIV_2POW(
+ readl(CLKPWR_HCLK_DIV(CLKPWR_IOBASE)))];
+}
+
+static struct clk clk_hclk = {
+ .parent = &clk_armpll,
+};
+
+static struct clk clk_pclk = {
+ .parent = &clk_armpll,
+};
+
+static int local_onoff_enable(struct clk *clk, int enable)
+{
+ u32 tmp;
+
+ tmp = readl(clk->enable_reg);
+
+ if (enable == 0)
+ tmp &= ~clk->enable_mask;
+ else
+ tmp |= clk->enable_mask;
+
+ writel(tmp, clk->enable_reg);
+
+ return 0;
+}
+
+/* Peripheral clock sources */
+static struct clk clk_timer0 = {
+ .parent = &clk_pclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_TIMERS_PWMS_CLK_CTRL_1(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_TMRPWMCLK_TIMER0_EN,
+};
+static struct clk clk_timer1 = {
+ .parent = &clk_pclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_TIMERS_PWMS_CLK_CTRL_1(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_TMRPWMCLK_TIMER1_EN,
+};
+static struct clk clk_timer2 = {
+ .parent = &clk_pclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_TIMERS_PWMS_CLK_CTRL_1(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_TMRPWMCLK_TIMER2_EN,
+};
+static struct clk clk_timer3 = {
+ .parent = &clk_pclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_TIMERS_PWMS_CLK_CTRL_1(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_TMRPWMCLK_TIMER3_EN,
+};
+static struct clk clk_wdt = {
+ .parent = &clk_pclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_TIMER_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_PWMCLK_WDOG_EN,
+};
+static struct clk clk_vfp9 = {
+ .parent = &clk_pclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_DEBUG_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_VFP_CLOCK_ENABLE_BIT,
+};
+static struct clk clk_dma = {
+ .parent = &clk_hclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_DMA_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_DMACLKCTRL_CLK_EN,
+};
+
+static struct clk clk_uart3 = {
+ .parent = &clk_pclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_UART_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_UARTCLKCTRL_UART3_EN,
+};
+
+static struct clk clk_uart4 = {
+ .parent = &clk_pclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_UART_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_UARTCLKCTRL_UART4_EN,
+};
+
+static struct clk clk_uart5 = {
+ .parent = &clk_pclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_UART_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_UARTCLKCTRL_UART5_EN,
+};
+
+static struct clk clk_uart6 = {
+ .parent = &clk_pclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_UART_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_UARTCLKCTRL_UART6_EN,
+};
+
+static struct clk clk_i2c0 = {
+ .parent = &clk_hclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_I2C_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_I2CCLK_I2C1CLK_EN,
+};
+
+static struct clk clk_i2c1 = {
+ .parent = &clk_hclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_I2C_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_I2CCLK_I2C2CLK_EN,
+};
+
+static struct clk clk_i2c2 = {
+ .parent = &clk_pclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = USB_OTG_IOBASE + 0xFF4,
+ .enable_mask = 0x4,
+};
+
+static struct clk clk_ssp0 = {
+ .parent = &clk_hclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_SSP_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_SSPCTRL_SSPCLK0_EN,
+};
+static struct clk clk_ssp1 = {
+ .parent = &clk_hclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_SSP_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_SSPCTRL_SSPCLK1_EN,
+};
+
+static struct clk clk_kscan = {
+ .parent = &osc_32KHz,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_KEY_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_KEYCLKCTRL_CLK_EN,
+};
+
+static struct clk clk_nand = {
+ .parent = &clk_hclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_NAND_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_NANDCLK_SLCCLK_EN,
+};
+
+static struct clk clk_i2s0 = {
+ .parent = &clk_hclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_I2S_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_I2SCTRL_I2SCLK0_EN,
+};
+static struct clk clk_i2s1 = {
+ .parent = &clk_hclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_I2S_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_I2SCTRL_I2SCLK1_EN,
+};
+
+static struct clk clk_net = {
+ .parent = &clk_hclk,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_MACCLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = (CLKPWR_MACCTRL_DMACLK_EN |
+ CLKPWR_MACCTRL_MMIOCLK_EN | CLKPWR_MACCTRL_HRCCLK_EN),
+};
+
+static struct clk clk_rtc = {
+ .parent = &osc_32KHz,
+ .rate = 1, /* 1 Hz */
+};
+
+static struct clk clk_usbd = {
+ .parent = &clk_usbpll,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_USB_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_USBCTRL_HCLK_EN,
+};
+
+static int tsc_onoff_enable(struct clk *clk, int enable)
+{
+ u32 tmp;
+
+ /* Make sure 32KHz clock is the selected clock */
+ tmp = readl(CLKPWR_ADC_CLK_CTRL_1(CLKPWR_IOBASE));
+ tmp &= ~CLKPWR_ADCCTRL1_PCLK_SEL;
+ writel(tmp, CLKPWR_ADC_CLK_CTRL_1(CLKPWR_IOBASE));
+
+ if (enable == 0)
+ writel(0, clk->enable_reg);
+ else
+ writel(clk->enable_mask, clk->enable_reg);
+
+ return 0;
+}
+
+static struct clk clk_tsc = {
+ .parent = &osc_32KHz,
+ .enable = &tsc_onoff_enable,
+ .enable_reg = CLKPWR_ADC_CLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_ADC32CLKCTRL_CLK_EN,
+};
+
+static int mmc_onoff_enable(struct clk *clk, int enable)
+{
+ u32 tmp;
+
+ tmp = readl(CLKPWR_MS_CTRL(CLKPWR_IOBASE)) &
+ ~(CLKPWR_MSCARD_SDCARD_EN|CLKPWR_MSCARD_SDCARD_DIV(15));
+
+ /* If rate is 0, disable clock */
+ if (enable != 0)
+ tmp |= CLKPWR_MSCARD_SDCARD_EN | CLKPWR_MSCARD_SDCARD_DIV(1);
+
+ writel(tmp, CLKPWR_MS_CTRL(CLKPWR_IOBASE));
+
+ return 0;
+}
+
+static u32 mmc_get_rate(struct clk *clk)
+{
+ u32 div, tmp, rate;
+
+ div = readl(CLKPWR_MS_CTRL(CLKPWR_IOBASE));
+ tmp = div & CLKPWR_MSCARD_SDCARD_EN;
+
+ if (!tmp)
+ return 0;
+
+ /* Get the parent clock rate */
+ rate = clk_get_rate(clk->parent);
+
+ /* Get the LCD controller clock divider value */
+ div = div & 0xF;
+
+ if (!div)
+ return 0;
+
+ tmp = rate / div;
+
+ return tmp;
+}
+
+static int mmc_set_rate(struct clk *clk, u32 rate)
+{
+ if (rate == 0)
+ mmc_onoff_enable(clk, 0);
+ else
+ mmc_onoff_enable(clk, 1);
+
+ return 0;
+}
+
+static struct clk clk_mmc = {
+ .parent = &clk_armpll,
+ .set_rate = &mmc_set_rate,
+ .get_rate = &mmc_get_rate,
+ .enable = &mmc_onoff_enable,
+ .enable_reg = CLKPWR_MS_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_MSCARD_SDCARD_EN,
+};
+
+static u32 clcd_get_rate(struct clk *clk)
+{
+ u32 tmp, div, rate;
+
+ tmp = readl(CLKPWR_LCDCLK_CTRL(CLKPWR_IOBASE)) &
+ CLKPWR_LCDCTRL_CLK_EN;
+
+ if (!tmp)
+ return 0;
+
+ rate = clk_get_rate(clk->parent);
+ tmp = readl((io_p2v(LCD_BASE)) + CLCD_TIM2);
+
+ /* Only supports internal clocking */
+ if (tmp & TIM2_BCD)
+ return rate;
+
+ div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22);
+ tmp = rate / (2 + div);
+
+ return tmp;
+}
+
+static int clcd_set_rate(struct clk *clk, u32 rate)
+{
+ u32 tmp, prate, div;
+
+ tmp = readl((io_p2v(LCD_BASE)) + CLCD_TIM2);
+ prate = clk_get_rate(clk->parent);
+
+ if (rate == prate) {
+ tmp |= TIM2_BCD;
+ local_onoff_enable(clk, 1);
+ } else {
+ /* Find closest divider */
+ div = prate / rate;
+ if (div == 1)
+ div = 0;
+ else
+ div -= 2;
+
+ tmp &= ~(0xF800001F);
+ tmp &= ~TIM2_BCD;
+ tmp |= (div & 0x1F);
+ tmp |= (((div >> 5) & 0x1F) << 27);
+ writel(tmp, ((io_p2v(LCD_BASE)) + CLCD_TIM2));
+ local_onoff_enable(clk, 1);
+ }
+
+ return 0;
+}
+static struct clk clk_lcd = {
+ .parent = &clk_hclk,
+ .set_rate = &clcd_set_rate,
+ .get_rate = &clcd_get_rate,
+ .enable = &local_onoff_enable,
+ .enable_reg = CLKPWR_LCDCLK_CTRL(CLKPWR_IOBASE),
+ .enable_mask = CLKPWR_LCDCTRL_CLK_EN,
+};
+
+static inline void clk_lock(void)
+{
+ local_irq_disable();
+}
+
+static inline void clk_unlock(void)
+{
+ local_irq_enable();
+}
+
+static void local_clk_disable(struct clk *clk)
+{
+ /* Don't attempt to disable clock if it has no users */
+ if (clk->usecount > 0) {
+ clk->usecount--;
+
+ /* Only disable clock when it has no more users */
+ if ((clk->usecount == 0) && (clk->enable))
+ clk->enable(clk, 0);
+
+ /* Check parent clocks, they may need to be disabled too */
+ if (clk->parent)
+ local_clk_disable(clk->parent);
+ }
+}
+
+static int local_clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ if (clk->usecount == 0) {
+ /* Enable parent clocks first */
+ if (clk->parent)
+ ret = local_clk_enable(clk->parent);
+
+ /* Enable clock on first use */
+ if ((ret == 0) && (clk->enable)) {
+ ret = clk->enable(clk, 1);
+ clk->usecount++;
+ }
+
+ /* Back out use counters if enable fails */
+ if (ret < 0)
+ local_clk_disable(clk);
+ }
+
+ return ret;
+}
+
+/*
+ * clk_enable - inform the system when the clock source should be running.
+ */
+int clk_enable(struct clk *clk)
+{
+ int ret;
+
+ clk_lock();
+ ret = local_clk_enable(clk);
+ clk_unlock();
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+/*
+ * clk_disable - inform the system when the clock source is no longer required
+ */
+void clk_disable(struct clk *clk)
+{
+ clk_lock();
+ local_clk_disable(clk);
+ clk_unlock();
+}
+EXPORT_SYMBOL(clk_disable);
+
+/*
+ * clk_get_rate - obtain the current clock rate (in Hz) for a clock source
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (clk->get_rate)
+ return (clk->get_rate)(clk);
+
+ /* If a clocks rate is 0, it uses the parent's rate instead. */
+ while (clk->rate == 0)
+ clk = clk->parent;
+
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * clk_set_rate - set the clock rate for a clock source
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret = -EINVAL;
+
+ /* Most system clocks can only be enabled or disabled, with
+ the actual rate set as part of the peripheral dividers
+ instead of high level clock control */
+ if (clk->set_rate) {
+ clk_lock();
+ ret = (clk->set_rate)(clk, rate);
+ clk_unlock();
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/*
+ * clk_round_rate - adjust a rate to the exact rate a clock can provide
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ int ret;
+
+ /* Use set_rate to try to adjust the rate if it supports it */
+ ret = clk_set_rate(clk, rate);
+ if (ret < 0)
+ return (long) ret;
+
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+/*
+ * clk_set_parent - set the parent clock source for this clock
+ */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ /* Clock re-parenting is not supported */
+ return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/*
+ * clk_get_parent - get the parent clock source for this clock
+ */
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = (d), \
+ .con_id = (n), \
+ .clk = &(c), \
+ },
+
+static struct clk_lookup lookups[] __initdata = {
+ _REGISTER_CLOCK(NULL, "osc_32KHz", osc_32KHz)
+ _REGISTER_CLOCK(NULL, "osc_pll397", osc_pll397)
+ _REGISTER_CLOCK(NULL, "osc_main", osc_main)
+ _REGISTER_CLOCK(NULL, "sys_ck", clk_sys)
+ _REGISTER_CLOCK(NULL, "arm_pll_ck", clk_armpll)
+ _REGISTER_CLOCK(NULL, "ck_pll5", clk_usbpll)
+ _REGISTER_CLOCK(NULL, "hclk_ck", clk_hclk)
+ _REGISTER_CLOCK(NULL, "pclk_ck", clk_pclk)
+ _REGISTER_CLOCK(NULL, "timer0_ck", clk_timer0)
+ _REGISTER_CLOCK(NULL, "timer1_ck", clk_timer1)
+ _REGISTER_CLOCK(NULL, "timer2_ck", clk_timer2)
+ _REGISTER_CLOCK(NULL, "timer3_ck", clk_timer3)
+ _REGISTER_CLOCK(NULL, "vfp9_ck", clk_vfp9)
+ _REGISTER_CLOCK(NULL, "clk_dmac", clk_dma)
+ _REGISTER_CLOCK("pnx4008-watchdog", NULL, clk_wdt)
+ _REGISTER_CLOCK(NULL, "uart3_ck", clk_uart3)
+ _REGISTER_CLOCK(NULL, "uart4_ck", clk_uart4)
+ _REGISTER_CLOCK(NULL, "uart5_ck", clk_uart5)
+ _REGISTER_CLOCK(NULL, "uart6_ck", clk_uart6)
+ _REGISTER_CLOCK("pnx-i2c.0", NULL, clk_i2c0)
+ _REGISTER_CLOCK("pnx-i2c.1", NULL, clk_i2c1)
+ _REGISTER_CLOCK("pnx-i2c.2", NULL, clk_i2c2)
+ _REGISTER_CLOCK("dev:ssp0", NULL, clk_ssp0)
+ _REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
+ _REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
+ _REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
+ _REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0)
+ _REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1)
+ _REGISTER_CLOCK("lpc32xx-ts", NULL, clk_tsc)
+ _REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc)
+ _REGISTER_CLOCK("lpc-net.0", NULL, clk_net)
+ _REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
+ _REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)
+ _REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc)
+};
+
+int __init clk_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ /* Setup muxed SYSCLK for HCLK PLL base -this selects the
+ parent clock used for the ARM PLL and is used to derive
+ the many system clock rates in the device. */
+ if (clk_is_sysclk_mainosc() != 0)
+ clk_sys.parent = &osc_main;
+ else
+ clk_sys.parent = &osc_pll397;
+
+ clk_sys.rate = clk_sys.parent->rate;
+
+ /* Compute the current ARM PLL and USB PLL frequencies */
+ local_update_armpll_rate();
+ local_update_usbpll_rate();
+
+ /* Compute HCLK and PCLK bus rates */
+ clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div();
+ clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div();
+
+ /* Enable system clocks - this step is somewhat formal, as the
+ clocks are already running, but it does get the clock data
+ inline with the actual system state. Never disable these
+ clocks as they will only stop if the system is going to sleep.
+ In that case, the chip/system power management functions will
+ handle clock gating. */
+ clk_enable(&clk_hclk);
+ clk_enable(&clk_pclk);
+
+ /* Timers 0 and 1 were enabled and are being used by the high
+ resolution tick function prior to this driver being initialized.
+ Tag them now as used */
+ clk_enable(&clk_timer0);
+ clk_enable(&clk_timer1);
+
+ return 0;
+}
+core_initcall(clk_init);
+
diff --git a/arch/arm/mach-lpc32xx/clock.h b/arch/arm/mach-lpc32xx/clock.h
new file mode 100644
index 0000000..f37f245
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/clock.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-lpc32xx/clock.h
+ *
+ * Author: Kevin Wells <kevin.wells at nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LPC32XX_CLOCK_H
+#define __LPC32XX_CLOCK_H
+
+struct clk {
+ struct list_head node;
+ struct clk *parent;
+ u32 rate;
+ s8 usecount;
+
+ int (*set_rate) (struct clk *, u32);
+ int (*enable) (struct clk *clk, int);
+ u32 (*get_rate) (struct clk *clk);
+
+ /* Register address and bit mask for simple clocks */
+ u32 enable_reg;
+ u32 enable_mask;
+};
+
+#endif
--
1.6.6
More information about the linux-arm-kernel
mailing list