[PATCH] OMAP CPU ID: fix OMAP4 build failure

[Pagare, Abhijit]

Santosh,

> -----Original Message-----
> From: Shilimkar, Santosh
> Sent: Wednesday, January 20, 2010 12:52 PM
> To: Pagare, Abhijit; Paul Walmsley; Pagare, Abhijit
> Cc: tony at atomide.com; linux-omap at vger.kernel.org; linux-arm-
> kernel at lists.infradead.org
> Subject: RE: [PATCH] OMAP CPU ID: fix OMAP4 build failure
> 
> Abhijit,
> 
> <snip>
> 
> > I had used this flag earlier as there was nothing fixed as to name it as
> ES1 that time. So now it can
> > be migrated from CHIP_IS_OMAP4430 to CHIP_IS_OMAP4430ES1. I think
> CHIP_IS_OMAP4430 would be redundant
> > in that case and should be removed. A patch would be essential to take
> care of that in the places
> > where it is used. If you feel the same I can send a patch for fixing
> this.
> >
> 
> Tony has already created the patch. Please use that and test it on OMAP4.

I will test it on OMAP4 but my point was as follows,

The patch that is sent has both the definitions of CHIP_IS_OMAP4430 and CHIP_IS_OMAP4430ES1 where the later is initialized with the former's value. I was actually wondering why the former is required anyways. It is a redundant thing and can be replaced totally.

> 
> Regards,
> Santosh