January 2017 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jan 1 02:21:55 PST 2017
Ending: Tue Jan 31 23:23:10 PST 2017
Messages: 620

• [LEDE-DEV] 3g led netdev setup   Giuseppe Lippolis
• [LEDE-DEV] [Babel-users] Babeld now has procd support on OpenWRT/LEDE   Dave Taht
• [LEDE-DEV] [Babel-users] Babeld now has procd support on OpenWRT/LEDE   Dave Taht
• [LEDE-DEV] [Babel-users] Babeld now has procd support on OpenWRT/LEDE   Dave Taht
• [LEDE-DEV] [Babel-users] Babeld now has procd support on OpenWRT/LEDE   Toke Høiland-Jørgensen
• [LEDE-DEV] [lede] Patch notification: 1 patch updated   Patchwork
• [LEDE-DEV] [lede] Patch notification: 1 patch updated   Patchwork
• [LEDE-DEV] [lede] Patch notification: 1 patch updated   Patchwork
• [LEDE-DEV] [Make-wifi-fast] ath9k airtime fairness stabiity issues?   Loganaden Velvindron
• [LEDE-DEV] [Make-wifi-fast] ath9k airtime fairness stabiity issues?   Felix Fietkau
• [LEDE-DEV] [Make-wifi-fast] ath9k airtime fairness stabiity issues?   Michal Kazior
• [LEDE-DEV] [Make-wifi-fast] ath9k airtime fairness stabiity issues?   Dave Taht
• [LEDE-DEV] [Make-wifi-fast] ath9k airtime fairness stabiity issues?   Dave Taht
• [LEDE-DEV] [Make-wifi-fast] ath9k airtime fairness stabiity issues?   Felix Fietkau
• [LEDE-DEV] [Make-wifi-fast] ath9k airtime fairness stabiity issues?   Weedy
• [LEDE-DEV] [Make-wifi-fast] ath9k airtime fairness stabiity issues?   Jaap Buurman
• [LEDE-DEV] [Make-wifi-fast] ath9k airtime fairness stabiity issues?   Felix Fietkau
• [LEDE-DEV] [OpenWrt-Devel] [PATCH oldpackage/eventlog oldpackage/syslog-ng3] version bump to latest   Stijn Tintel
• [LEDE-DEV] [OpenWrt-Devel] [RFC] [PULL REQUEST] rt2x00 patches from OpenWrt.org   Daniel Golle
• [LEDE-DEV] [OpenWrt-Devel] Adding host Java support to the buildbots   Ralph Sennhauser
• [LEDE-DEV] [OpenWrt-Devel] Adding host Java support to the buildbots   Dana Myers
• [OpenWrt-Devel] Any interest in adding runit to OpenWRT?   Denys Vlasenko
• [LEDE-DEV] [OpenWrt-Devel] Bounty: simplify extracting/restoring kernel .config   Zoltan Gyarmati
• [LEDE-DEV] [OpenWrt-Devel] Bounty: simplify extracting/restoring kernel .config   Felix Fietkau
• [LEDE-DEV] [OpenWrt-Devel] Bounty: simplify extracting/restoring kernel .config   Zoltan Gyarmati
• [LEDE-DEV] [OpenWrt-Devel] Bounty: simplify extracting/restoring kernel .config   Felix Fietkau
• [LEDE-DEV] [OpenWrt-Devel] Bounty: simplify extracting/restoring kernel .config   Zoltan Gyarmati
• [LEDE-DEV] [OpenWrt-Devel] Data_Model_Structure_Proposal_for_OpenWRT   Sukru Senli
• [OpenWrt-Devel] upstreaming (most) rt2x00 patches   Martin Blumenstingl
• [LEDE-DEV] [PATCH 0/3] Add GPIO/LED Support for the PC Engines APU2/APU3   Chris Blake
• [LEDE-DEV] [PATCH 0/6] Random updates and fixes   Florian Fainelli
• [LEDE-DEV] [PATCH 04/11] build: image.mk: don't install-images for devices not selected   Felix Fietkau
• [LEDE-DEV] [PATCH 04/11] build: image.mk: don't install-images for devices not selected   Yousong Zhou
• [LEDE-DEV] [PATCH 04/11] build: image.mk: don't install-images for devices not selected   Felix Fietkau
• [LEDE-DEV] [PATCH 04/11] build: image.mk: don't install-images for devices not selected   Yousong Zhou
• [LEDE-DEV] [PATCH 04/11] build: image.mk: don't install-images for devices not selected   Felix Fietkau
• [LEDE-DEV] [PATCH 1/2] ath10k-ct: Fix performance of 2x2 hardware running 3x3 firmware.   greearb at candelatech.com
• [LEDE-DEV] [PATCH 1/2] ath10k-ct: Fix performance of 2x2 hardware running 3x3 firmware.   Ben Greear
• [LEDE-DEV] [PATCH 1/2] hostapd: enable support for logging wpa_printf messages to syslog   Rafał Miłecki
• [LEDE-DEV] [PATCH 1/2] imx6: refresh kernel config   Koen Vandeputte
• [LEDE-DEV] [PATCH 1/2] mac80211: backport some upstream fixes   Koen Vandeputte
• [LEDE-DEV] [PATCH 1/2] mac80211: backport some upstream fixes   Felix Fietkau
• [LEDE-DEV] [PATCH 1/2] ubox: install kernel module utilities to /sbin directory   Yousong Zhou
• [LEDE-DEV] [PATCH 1/3] x86/64: Enable GPIO sysfs & GPIO LED support   Chris Blake
• [LEDE-DEV] [PATCH 1/4] x86: Add sp5100_tco AMD patches   Chris Blake
• [LEDE-DEV] [PATCH 2/2] generic: keep module aliases inside .modinfo   Yousong Zhou
• [LEDE-DEV] [PATCH 2/2] generic: keep module aliases inside .modinfo   Yousong Zhou
• [LEDE-DEV] [PATCH 2/2] imx6: fix build error   Koen Vandeputte
• [LEDE-DEV] [PATCH 2/2] imx6: fix build error   Felix Fietkau
• [LEDE-DEV] [PATCH 2/2] mac80211.sh: Support VHT40 hw type for ibss.   greearb at candelatech.com
• [LEDE-DEV] [PATCH 2/2] mac80211.sh: Support VHT40 hw type for ibss.   Felix Fietkau
• [LEDE-DEV] [PATCH 2/2] mac80211.sh: Support VHT40 hw type for ibss.   Ben Greear
• [LEDE-DEV] [PATCH 2/2] mac80211.sh: Support VHT40 hw type for ibss.   Felix Fietkau
• [LEDE-DEV] [PATCH 2/2] mac80211: refresh all patches   Koen Vandeputte
• [LEDE-DEV] [PATCH 2/2] mac80211: start hostapd with logging wpa_printf messages to syslog   Rafał Miłecki
• [LEDE-DEV] [PATCH 2/3] gpio-nct5104d: Add nct5104d driver package   Chris Blake
• [LEDE-DEV] [PATCH 2/4] x86: add kernel module for sp5100_tco watchdog   Chris Blake
• [LEDE-DEV] [PATCH 3/3] leds-apu2: Add PC Engines APU2 LED driver   Chris Blake
• [LEDE-DEV] [PATCH 3/3] leds-apu2: Add PC Engines APU2 LED driver   Felix Fietkau
• [LEDE-DEV] [PATCH 3/4] x86: Add NCT5104D GPIO driver   Chris Blake
• [LEDE-DEV] [PATCH 3/4] x86: Add NCT5104D GPIO driver   Felix Fietkau
• [LEDE-DEV] [PATCH 3/4] x86: Add NCT5104D GPIO driver   Chris Blake
• [LEDE-DEV] [PATCH 3/4] x86: Add NCT5104D GPIO driver   Felix Fietkau
• [LEDE-DEV] [PATCH 4/4] x86: Add APU2 LED Driver   Chris Blake
• [LEDE-DEV] [PATCH 4/4] x86: Add APU2 LED Driver   Felix Fietkau
• [LEDE-DEV] [PATCH 4/4] x86: Add APU2 LED Driver   Chris Blake
• [LEDE-DEV] [PATCH 4/4] x86: Add APU2 LED Driver   Chris Blake
• [LEDE-DEV] [PATCH 4/4] x86: Add APU2 LED Driver   Felix Fietkau
• [LEDE-DEV] [PATCH 4/4] x86: Add APU2 LED Driver   Hans Ulli Kroll
• [LEDE-DEV] [PATCH 4/4] x86: Add APU2 LED Driver   Cezary Jackiewicz
• [LEDE-DEV] [PATCH 4/4] x86: Add APU2 LED Driver   Chris Blake
• [LEDE-DEV] [PATCH 4/4] x86: Add APU2 LED Driver   Felix Fietkau
• [LEDE-DEV] [PATCH 4/4] x86: Add APU2 LED Driver   Philip Prindeville
• [LEDE-DEV] [PATCH] ar71xx/ath79: mark soft_config as writeable in mach-rb941.c   hacks at slashdirt.org
• [LEDE-DEV] [PATCH] ar71xx/ath79: mark soft_config as writeable in mach-rb941.c   John Crispin
• [LEDE-DEV] [PATCH] ar71xx: add Abicom SC300M support   Conor O'Gorman
• [LEDE-DEV] [PATCH] ar71xx: add Abicom SC300M support   John Crispin
• [LEDE-DEV] [PATCH] ar71xx: add Abicom SC300M support   Sebastian Kemper
• [LEDE-DEV] [PATCH] ar71xx: add Abicom SC450 support   Conor O'Gorman
• [LEDE-DEV] [PATCH] ar71xx: add Abicom SC450 support   John Crispin
• [LEDE-DEV] [PATCH] ar71xx: add initial support for RB953GS-5HnT-RP   Gui Iribarren
• [LEDE-DEV] [PATCH] ar71xx: add support for PQI Air Pen   YuheiOKAWA
• [LEDE-DEV] [PATCH] ar71xx: add support for PQI Air Pen   John Crispin
• [LEDE-DEV] [PATCH] ar71xx: add support for RB-941-2nD   "Thibaut VARENE <hacks at slashdirt.org>" at vps.slashdirt.org
• [LEDE-DEV] [PATCH] ar71xx: add support for RB-941-2nD   Thibaut VARENE
• [LEDE-DEV] [PATCH] ar71xx: add support for RB-941-2nD   Felix Fietkau
• [LEDE-DEV] [PATCH] ar71xx: add support for RB-941-2nD   Thibaut
• [LEDE-DEV] [PATCH] ar71xx: GPIO driver backport   Daniel Gonzalez Cabanelas
• [LEDE-DEV] [PATCH] ar71xx: prepare jffs2 partition properly in factory.bin for BHR-4GRV2   Naoki FUKAUMI
• [LEDE-DEV] [PATCH] ar71xx: prepare jffs2 partition properly in factory.bin for BHR-4GRV2   Naoki FUKAUMI
• [LEDE-DEV] [PATCH] ar71xx: prepare jffs2 partition properly in factory.bin for BHR-4GRV2   Felix Fietkau
• [LEDE-DEV] [PATCH] ath10k-ct: Support ath10k CT firmware for 9887 chipsets.   greearb at candelatech.com
• [LEDE-DEV] [PATCH] ath10k-ct: Support ath10k CT firmware for 9887 chipsets.   Ben Greear
• [LEDE-DEV] [PATCH] ath10k-firmware: Update QCA988X firmware to latest version   Timo Sigurdsson
• [LEDE-DEV] [PATCH] base-files: uppercase default hostname: LEDE   Yousong Zhou
• [LEDE-DEV] [PATCH] bcm53xx: fix LAN MAC address for devices that use eth2 originally   Rafał Miłecki
• [LEDE-DEV] [PATCH] brcm47xx: legacy: specify DEVICE_PACKAGES for all devices   Rafał Miłecki
• [LEDE-DEV] [PATCH] build: Suffix build directory with _$(LIBC) for external toolchains   Florian Fainelli
• [LEDE-DEV] [PATCH] cns3xxx - Remove deprecated mpcore watchdog device   Koen Vandeputte
• [LEDE-DEV] [PATCH] cns3xxx: restore mpcore watchdog   Koen Vandeputte
• [LEDE-DEV] [PATCH] cns3xxx: restore mpcore watchdog   Tim Harvey
• [LEDE-DEV] [PATCH] cns3xxx: restore mpcore watchdog   Koen Vandeputte
• [LEDE-DEV] [PATCH] cns3xxx: restore mpcore watchdog   Tim Harvey
• [LEDE-DEV] [PATCH] curl: vtls: s/SSLEAY/OPENSSL   Stijn Segers
• [LEDE-DEV] [PATCH] imx6: Add kmod-hwmon-core dependency to default platform packages   Petr Štetiar
• [LEDE-DEV] [PATCH] imx6: Add kmod-hwmon-core dependency to default platform packages   Felix Fietkau
• [LEDE-DEV] [PATCH] imx6: kernel: Backport serial port fixes   Petr Štetiar
• [PATCH] iperf3: update to version 3.1.5 and download via git   Christian Lamparter
• [LEDE-DEV] [PATCH] iperf3: update to version 3.1.5 and download via git   Daniel Engberg
• [PATCH] iperf3: update to version 3.1.5 and download via git   Christian Lamparter
• [LEDE-DEV] [PATCH] iperf3: update to version 3.1.5 and download via git   Daniel Engberg
• [LEDE-DEV] [PATCH] iperf3: update to version 3.1.5 and download via git   Daniel Engberg
• [LEDE-DEV] [PATCH] iperf3: update to version 3.1.5 and download via git   Dave Täht
• [PATCH] iperf3: update to version 3.1.5 and download via git   Christian Lamparter
• [LEDE-DEV] [PATCH] iperf3: update to version 3.1.5 and download via git   Christian Lamparter
• [LEDE-DEV] [PATCH] Kernel: bump LEDE 17.01 kernel to 4.4.44   Stijn Segers
• [LEDE-DEV] [PATCH] kernel: bump to 4.4.41   Koen Vandeputte
• [LEDE-DEV] [PATCH] kernel: bump to 4.4.43   Koen Vandeputte
• [LEDE-DEV] [PATCH] kernel: bump to 4.4.43   Felix Fietkau
• [LEDE-DEV] [PATCH] Kernel: bump to 4.4.44   Stijn Segers
• [LEDE-DEV] [PATCH] kernel: bump to 4.4.45   Koen Vandeputte
• [LEDE-DEV] [PATCH] kernel: bump to 4.4.45   Stijn Segers
• [LEDE-DEV] [PATCH] kernel: can: Add missing regmap dependency for kernel 4.4   Florian Fainelli
• [LEDE-DEV] [PATCH] kmod-sched-core: Remove HFSC and replace it with HTB   Toke Høiland-Jørgensen
• [LEDE-DEV] [PATCH] kmod-sched-core: Remove HFSC and replace it with HTB   Felix Fietkau
• [LEDE-DEV] [PATCH] kmod-sched-core: Remove HFSC and replace it with HTB   Toke Høiland-Jørgensen
• [LEDE-DEV] [PATCH] kmod-sched-core: Remove HFSC and replace it with HTB   Felix Fietkau
• [PATCH] kmodloader: fix out-of-order module loading   Christian Lamparter
• [LEDE-DEV] [PATCH] kmodloader: fix out-of-order module loading   Christian Lamparter
• [LEDE-DEV] [PATCH] lantiq: fix console print   Hauke Mehrtens
• [PATCH] lantiq: fix console print   Martin Blumenstingl
• [LEDE-DEV] [PATCH] lantiq: fix unaligned access in xrx200_poll_rx()   Alexander Couzens
• [LEDE-DEV] [PATCH] lantiq: set the usb clock source   Mathias Kresin
• [LEDE-DEV] [PATCH] lantiq: set the usb clock source   Mathias Kresin
• [LEDE-DEV] [PATCH] lantiq: set the usb clock source   Hauke Mehrtens
• [LEDE-DEV] [PATCH] lantiq: update USB controller handling   Hauke Mehrtens
• [PATCH] lantiq: update USB controller handling   Martin Blumenstingl
• [LEDE-DEV] [PATCH] lantiq: update USB controller handling   Hauke Mehrtens
• [LEDE-DEV] [PATCH] lantiq: update USB controller handling   Antti Seppälä
• [LEDE-DEV] [PATCH] lantiq: update USB controller handling   Hauke Mehrtens
• [LEDE-DEV] [PATCH] lantiq: update USB controller handling   Antti Seppälä
• [LEDE-DEV] [PATCH] lantiq: update USB controller handling   Hauke Mehrtens
• [LEDE-DEV] [PATCH] ledtrig-netdev: don't cancel work on events for different interfaces   adron at yapic.net
• [LEDE-DEV] [PATCH] ledtrig-netdev: don't cancel work on events for different interfaces   adron at yapic.net
• [LEDE-DEV] [PATCH] libubox: Fix -Wsign-compare and sign conversion warnings   Rosen Penev
• [LEDE-DEV] [PATCH] libubox: Fix -Wsign-compare and sign conversion warnings   Rosen Penev
• [LEDE-DEV] [PATCH] mac80211: backport calculate-min-channel-width fix   Koen Vandeputte
• [LEDE-DEV] [PATCH] mac80211: backport calculate-min-channel-width fix   Felix Fietkau
• [LEDE-DEV] [PATCH] mac80211: backport calculate-min-channel-width fix   Koen Vandeputte
• [LEDE-DEV] [PATCH] mac80211: backport calculate-min-channel-width fix   Rafał Miłecki
• [LEDE-DEV] [PATCH] mac80211: enable brcm80211 debugging by default on bcm53xx   Rafał Miłecki
• [LEDE-DEV] [PATCH] mbedtls: add static files in staging_dir   Luka Perkov
• [LEDE-DEV] [PATCH] mbedtls: add static files in staging_dir   Jo-Philipp Wich
• [LEDE-DEV] [PATCH] mbedtls: add static files in staging_dir   Luka Perkov
• [LEDE-DEV] [PATCH] mtd: Fix the soft reboot problem found on MediaTek devices with 32M Flash.   L. D. Pinney
• [LEDE-DEV] [PATCH] mtd: Fix the soft reboot problem found on MediaTek devices with 32M Flash.   Mathias Kresin
• [PATCH] musl: update musl to 1.1.16 and switch to download from git   Christian Lamparter
• [LEDE-DEV] [PATCH] musl: update musl to 1.1.16 and switch to download from git   Koen Vandeputte
• [LEDE-DEV] [PATCH] musl: update musl to 1.1.16 and switch to download from git   Hannu Nyman
• [LEDE-DEV] [PATCH] musl: update musl to 1.1.16 and switch to download from git   Koen Vandeputte
• [LEDE-DEV] [PATCH] mxs: remove stale references to obsolete kernel module packages   Michael Heimpold
• [LEDE-DEV] [PATCH] netfilter: re-enable TEE support for kernel 4.4   Koen Vandeputte
• [LEDE-DEV] [PATCH] netifd: Add option to configure locktime for each device   Alin Nastac
• [LEDE-DEV] [PATCH] openvpn: add support for various new 2.4 configuration options   Magnus Kroken
• [LEDE-DEV] [PATCH] openvpn: add support for various new 2.4 configuration options   Magnus Kroken
• [LEDE-DEV] [PATCH] openvpn: add support for various new 2.4 configuration options   Felix Fietkau
• [LEDE-DEV] [PATCH] openvpn: ssl-enabled variants also provide a virtual openvpn-x509 package   Sven Roederer
• [LEDE-DEV] [PATCH] openvpn: ssl-enabled variants also provide a virtual openvpn-x509 package   Rafał Miłecki
• [LEDE-DEV] [PATCH] openvpn: ssl-enabled variants also provide a virtual openvpn-x509 package   Mirko Vogt
• [LEDE-DEV] [PATCH] openvpn: ssl-enabled variants also provide a virtual openvpn-x509 package   Sven Roederer
• [LEDE-DEV] [PATCH] openvpn: ssl-enabled variants also provide a virtual openvpn-x509 package   Sven Roederer
• [LEDE-DEV] [PATCH] openvpn: ssl-enabled variants also provide a virtual openvpn-x509 package   Jo-Philipp Wich
• [LEDE-DEV] [PATCH] procd: update procd.sh to support both: signal-names and signal-numbers   Bastian Bittorf
• [LEDE-DEV] [PATCH] ramips: Add back sdhci-mt7620 driver to default config   Rosen Penev
• [LEDE-DEV] [PATCH] ramips: Add I2C driver to the default kernel config   Rosen Penev
• [LEDE-DEV] [PATCH] ramips: Add I2C driver to the default kernel config   Daniel Golle
• [LEDE-DEV] [PATCH] ramips: Add I2C driver to the default kernel config   Felix Fietkau
• [LEDE-DEV] [PATCH] ramips: Add I2C driver to the default kernel config   Rosen Penev
• [LEDE-DEV] [PATCH] ramips: Add patch to reset SPI flash to 3-byte addressing   Alexandru Gagniuc
• [LEDE-DEV] [PATCH] ramips: Add patch to reset SPI flash to 3-byte addressing   Alexandru Gagniuc
• [LEDE-DEV] [PATCH] ramips: Add patch to reset SPI flash to 3-byte addressing   Daniel Golle
• [LEDE-DEV] [PATCH] ramips: Add patch to reset SPI flash to 3-byte addressing   Alex G.
• [LEDE-DEV] [PATCH] ramips: add support for RATOC REX-WIFISD2   FUKAUMI Naoki
• [LEDE-DEV] [PATCH] scripts/getver.sh: append short git hash based on upstream commit   Magnus Kroken
• [LEDE-DEV] [PATCH] scripts/getver.sh: append short git hash based on upstream commit   Morteza Milani
• [LEDE-DEV] [PATCH] This patch adds support for the Netgear WN3000RPv3 N300 repeater.   hacks at slashdirt.org
• [LEDE-DEV] [PATCH] This patch adds support for the Netgear WN3000RPv3 N300 repeater.   Rafał Miłecki
• [LEDE-DEV] [PATCH] This patch adds support for the Netgear WN3000RPv3 N300 repeater.   Mathias Kresin
• [LEDE-DEV] [PATCH] This patch adds support for the Netgear WN3000RPv3 N300 repeater.   Thibaut
• [LEDE-DEV] [PATCH] uboot-sunxi: fixup making uboot-xxx-boot.scr   Yousong Zhou
• [LEDE-DEV] [PATCH] uboot-sunxi: fixup making uboot-xxx-boot.scr   Felix Fietkau
• [LEDE-DEV] [PATCH] ubox: Add an option for more accurate timestamps in log   Wojciech Dubowik
• [LEDE-DEV] [PATCH] ubox: kmodloader: support '-q' quiet option   Kevin Darbyshire-Bryant
• [LEDE-DEV] [PATCH] ubox: kmodloader: support '-q' quiet option   Felix Fietkau
• [LEDE-DEV] [PATCH] ubox: turn logd into a separate package   Luka Perkov
• [LEDE-DEV] [PATCH] ubox: turn logd into a separate package   Jo-Philipp Wich
• [LEDE-DEV] [PATCH] ubusd: fix issue caused by an implicit cast   Mihai Richard
• [LEDE-DEV] [PATCH] uhttpd: Add TCP_FASTOPEN support   Rosen Penev
• [LEDE-DEV] [PATCH] uqmi: Set data format after clearing previous autoconnect state.   Nikolay Ledovskikh
• [LEDE-DEV] [PATCH] wpa_supplicant: Fix mesh encryption config   Sujith
• [LEDE-DEV] [PATCH] wpa_supplicant: Fix mesh encryption config   Stijn Tintel
• [LEDE-DEV] [PATCH] x86: add GPIO to FEATURES so kmod-leds-apu2 gets exposed   Stijn Segers
• [LEDE-DEV] [PATCH] x86: add GPIO to FEATURES so kmod-leds-apu2 gets exposed   Stijn Segers
• [LEDE-DEV] [PATCH] zlib: update to 1.2.10   Magnus Kroken
• [LEDE-DEV] [PATCH luci] luci-mod-admin-full: allow unset txpower value   Rafał Miłecki
• [LEDE-DEV] [PATCH netifd] interface-ip: route proto config support (FS#170)   Hans Dedecker
• [LEDE-DEV] [PATCH netifd] interface-ip: route proto config support (FS#170)   Toke Høiland-Jørgensen
• [LEDE-DEV] [PATCH netifd] interface-ip: route proto config support (FS#170)   Dave Täht
• [LEDE-DEV] [PATCH netifd] interface-ip: route proto config support (FS#170)   Hans Dedecker
• [LEDE-DEV] [PATCH netifd] interface: add prefix assignment priority support   Hans Dedecker
• [LEDE-DEV] [PATCH oldpackage/eventlog oldpackage/syslog-ng3] version bump to latest   Philip Prindeville
• [LEDE-DEV] [PATCH oldpackage/eventlog oldpackage/syslog-ng3] version bump to latest   Hauke Mehrtens
• [LEDE-DEV] [PATCH RFC 1/3] busybox: convert netmsg applet to "new style" applet definition   Magnus Kroken
• [LEDE-DEV] [PATCH RFC 1/3] busybox: convert netmsg applet to "new style" applet definition   Koen Vandeputte
• [LEDE-DEV] [PATCH RFC 2/3] busybox: convert lock applet to "new style" applet definitions   Magnus Kroken
• [LEDE-DEV] [PATCH RFC 2/3] busybox: convert lock applet to "new style" applet definitions   Koen Vandeputte
• [LEDE-DEV] [PATCH RFC 3/3] busybox: update to 1.26.1   Magnus Kroken
• [LEDE-DEV] [PATCH RFC 3/3] busybox: update to 1.26.1   Koen Vandeputte
• [LEDE-DEV] [PATCH ubox 0/6] kmodloader: add module alias support   Yousong Zhou
• [LEDE-DEV] [PATCH ubox 0/6] kmodloader: add module alias support   Lucian Cristian
• [LEDE-DEV] [PATCH ubox 0/6] kmodloader: add module alias support   Yousong Zhou
• [LEDE-DEV] [PATCH ubox 1/6] kmodloader: remove redundant glob wildcard char   Yousong Zhou
• [LEDE-DEV] [PATCH ubox 2/6] kmodloader: log to kmsg when loading directories of modules   Yousong Zhou
• [LEDE-DEV] [PATCH ubox 3/6] kmodloader: modprobe: skip possible command line arguments   Yousong Zhou
• [LEDE-DEV] [PATCH ubox 3/6] kmodloader: modprobe: skip possible command line arguments   Felix Fietkau
• [LEDE-DEV] [PATCH ubox 3/6] kmodloader: modprobe: skip possible command line arguments   Yousong Zhou
• [LEDE-DEV] [PATCH ubox 4/6] kmodloader: fix out-of-bound access when parsing .modinfo   Yousong Zhou
• [LEDE-DEV] [PATCH ubox 5/6] kmodloader: add module alias awareness   Yousong Zhou
• [LEDE-DEV] [PATCH ubox 6/6] kmodloader: make insert_module() idempotent   Yousong Zhou
• [LEDE-DEV] [PATCH ubox] kmodloader: support '-q' quiet option   Kevin Darbyshire-Bryant
• [LEDE-DEV] [PATCH ubox] kmodloader: support '-q' quiet option   John Crispin
• [LEDE-DEV] [PATCH ubox] kmodloader: support '-q' quiet option   Kevin Darbyshire-Bryant
• [LEDE-DEV] [PATCH ubox] kmodloader: support '-q' quiet option   John Crispin
• [LEDE-DEV] [PATCH ubox V2] kmodloader: support '-q' quiet option   Kevin Darbyshire-Bryant
• [LEDE-DEV] [PATCH ubox V3] kmodloader: support '-q' quiet option   Kevin Darbyshire-Bryant
• [LEDE-DEV] [PATCH v2 0/3] ar71xx: add Abicom SC300M, SC450, SC1750   Conor O'Gorman
• [LEDE-DEV] [PATCH v2 0/4] sunxi: rework image build and sysupgrade support   Zoltan HERPAI
• [LEDE-DEV] [PATCH v2 0/4] sunxi: rework image build and sysupgrade support   Yousong Zhou
• [LEDE-DEV] [PATCH v2 09/14] rt2x00: rt2x00pci: set PCI MWI only if supported   Daniel Golle
• [LEDE-DEV] [PATCH v2 09/14] rt2x00: rt2x00pci: set PCI MWI only if supported   John Crispin
• [LEDE-DEV] [PATCH v2 09/14] rt2x00: rt2x00pci: set PCI MWI only if supported   Daniel Golle
• [LEDE-DEV] [PATCH v2 1/2] ath10k-ct: Fix performance of 2x2 hardware running 3x3 firmware.   greearb at candelatech.com
• [LEDE-DEV] [PATCH v2 1/2] busybox: convert netmsg and lock applet to "new style" applet definition   Magnus Kroken
• [LEDE-DEV] [PATCH v2 1/2] busybox: convert netmsg and lock applet to "new style" applet definition   Koen Vandeputte
• [LEDE-DEV] [PATCH v2 1/3] ar71xx: add Abicom SC300M support   Conor O'Gorman
• [LEDE-DEV] [PATCH v2 2/2] ath10k-ct: Support ath10k CT firmware for 9887 chipsets.   greearb at candelatech.com
• [LEDE-DEV] [PATCH v2 2/2] busybox: update to 1.26.2   Magnus Kroken
• [LEDE-DEV] [PATCH v2 2/2] busybox: update to 1.26.2   Koen Vandeputte
• [LEDE-DEV] [PATCH v2 2/2] busybox: update to 1.26.2   Felix Fietkau
• [LEDE-DEV] [PATCH v2 2/3] ar71xx: add Abicom SC450 support   Conor O'Gorman
• [LEDE-DEV] [PATCH v2 2/3] mtd: bcm47xxpart: add device specific workaround for Buffalo WZR-900DHP   Naoki FUKAUMI
• [LEDE-DEV] [PATCH v2 3/3] ar71xx: add Abicom SC1750 support   Conor O'Gorman
• [LEDE-DEV] [PATCH v2] ar71xx: add initial support for RB953GS-5HnT-RP   Gui Iribarren
• [LEDE-DEV] [PATCHv2] ar71xx: add support for PQI Air Pen   YuheiOKAWA
• [LEDE-DEV] [PATCH V2] ar71xx: mark soft_config mtd part as writeable for RB-941-2nD   hacks at slashdirt.org
• [LEDE-DEV] [PATCH v2] ath10k-ct: Fix performance of 2x2 hardware running 3x3 firmware.   greearb at candelatech.com
• [LEDE-DEV] [PATCH v2] ath10k-ct: Fix performance of 2x2 hardware running 3x3 firmware.   Felix Fietkau
• [LEDE-DEV] [PATCH v2] brcm63xx: fix internal net phy interrupt config   Florian Fainelli
• [LEDE-DEV] [PATCH v2] cns3xxx: remove deprecated mpcore watchdog device   Koen Vandeputte
• [LEDE-DEV] [PATCH v2] cns3xxx: remove deprecated mpcore watchdog device   Felix Fietkau
• [LEDE-DEV] [PATCH v2] cns3xxx: remove deprecated mpcore watchdog device   Koen Vandeputte
• [LEDE-DEV] [PATCH v2] cns3xxx: remove deprecated mpcore watchdog device   Felix Fietkau
• [LEDE-DEV] [PATCH v2] Curl: fix HTTPS network timeouts with OpenSSL   Stijn Segers
• [LEDE-DEV] [PATCH v2] Curl: fix HTTPS network timeouts with OpenSSL   John Crispin
• [LEDE-DEV] [PATCH v2] imx6: Add hwmon-core driver to the kernel config instead of packaging it   Petr Štetiar
• [LEDE-DEV] [PATCH v2] imx6: Add hwmon-core driver to the kernel config instead of packaging it   Petr Štetiar
• [LEDE-DEV] [PATCH v2] imx6: fix build error   Koen Vandeputte
• [LEDE-DEV] [PATCH v2] kmod-sched-core: Add HTB and TBF traffic shapers   Toke Høiland-Jørgensen
• [LEDE-DEV] [PATCH v2] lantiq: update USB controller handling   Hauke Mehrtens
• [LEDE-DEV] [PATCH v2] lantiq: update USB controller handling   Hauke Mehrtens
• [LEDE-DEV] [PATCH v2] lantiq: update USB controller handling   Hauke Mehrtens
• [LEDE-DEV] [PATCH v2] leds-apu2: Add PC Engines APU2 LED driver   Chris Blake
• [LEDE-DEV] [PATCH v2] mac80211: backport calculate-min-channel-width fix   Koen Vandeputte
• [LEDE-DEV] [PATCH v2] mac80211: backport calculate-min-channel-width fix   Felix Fietkau
• [LEDE-DEV] [PATCH v2] mac80211: backport calculate-min-channel-width fix   Koen Vandeputte
• [PATCH v2] musl: update musl to 1.1.16+ and switch to download from git   Christian Lamparter
• [LEDE-DEV] [PATCH v2] musl: update musl to 1.1.16+ and switch to download from git   Koen Vandeputte
• [LEDE-DEV] [PATCH v2] openvpn: ssl-enabled variants also provide a virtual openvpn-crypto package   Sven Roederer
• [LEDE-DEV] [PATCH v2] openvpn: ssl-enabled variants also provide a virtual openvpn-crypto package   Sven Roederer
• [LEDE-DEV] [PATCH v2] openvpn: ssl-enabled variants also provide a virtual openvpn-crypto package   Sven Roederer
• [LEDE-DEV] [PATCH v2] package-ipkg: Do not fail build without base-files   Jo-Philipp Wich
• [LEDE-DEV] [PATCH v2] procd: update procd.sh to support both: signal-names and signal-numbers   Bastian Bittorf
• [LEDE-DEV] [PATCH v2] procd: update procd.sh to support both: signal-names and signal-numbers   Etienne Champetier
• [LEDE-DEV] [PATCH v2] procd: update procd.sh to support both: signal-names and signal-numbers   Bastian Bittorf
• [LEDE-DEV] [PATCH v2] procd: update procd.sh to support both: signal-names and signal-numbers   Jo-Philipp Wich
• [LEDE-DEV] [PATCH v2] procd: update procd.sh to support both: signal-names and signal-numbers   Etienne Champetier
• [LEDE-DEV] [PATCH V2] ramips: add support for Netgear WN3000RPv3   hacks at slashdirt.org
• [LEDE-DEV] [PATCH v2] ramips: add support for RATOC REX-WIFISD2   FUKAUMI Naoki
• [LEDE-DEV] [PATCH v2] wpa_supplicant: Fix mesh encryption config   Sujith
• [LEDE-DEV] [PATCH v2 netifd] interface-ip: route proto config support (FS#170)   Hans Dedecker
• [LEDE-DEV] [PATCH v2 ubox 0/6] kmodloader: add module alias support   Yousong Zhou
• [LEDE-DEV] [PATCH v2 ubox 0/6] kmodloader: add module alias support   Florian Fainelli
• [LEDE-DEV] [PATCH v2 ubox 1/6] kmodloader: remove redundant glob wildcard char   Yousong Zhou
• [LEDE-DEV] [PATCH v2 ubox 2/6] kmodloader: log to kmsg when loading directories of modules   Yousong Zhou
• [LEDE-DEV] [PATCH v2 ubox 3/6] kmodloader: modprobe: skip possible command line arguments   Yousong Zhou
• [LEDE-DEV] [PATCH v2 ubox 4/6] kmodloader: fix out-of-bound access when parsing .modinfo   Yousong Zhou
• [LEDE-DEV] [PATCH v2 ubox 5/6] kmodloader: add module alias awareness   Yousong Zhou
• [LEDE-DEV] [PATCH v2 ubox 6/6] kmodloader: make insert_module() idempotent   Yousong Zhou
• [LEDE-DEV] [PATCH v3 0/2] ar71xx: fix making firmwares for Linksys WRT400N   Yousong Zhou
• [LEDE-DEV] [PATCH v3 0/3] ar71xx: add Abicom SC300m, SC450, SC1750   Conor O'Gorman
• [LEDE-DEV] [PATCH v3 0/5] sunxi: rework image build and sysupgrade support   Yousong Zhou
• [LEDE-DEV] [PATCH v3 1/3] ar71xx: add Abicom SC300M support   Conor O'Gorman
• [LEDE-DEV] [PATCH v3 1/3] firmware-utils: improve tools for Buffalo DHP series   FUKAUMI Naoki
• [LEDE-DEV] [PATCH v3 1/5] sunxi: convert to new image generation method   Yousong Zhou
• [LEDE-DEV] [PATCH v3 2/3] ar71xx: add Abicom SC450 support   Conor O'Gorman
• [LEDE-DEV] [PATCH v3 2/3] bcm53xx: build factory images for WZR-900DHP series   FUKAUMI Naoki
• [LEDE-DEV] [PATCH v3 2/5] sunxi: make sdcard image with squashfs as rootfs   Yousong Zhou
• [LEDE-DEV] [PATCH v3 3/3] ar71xx: add Abicom SC1750 support   Conor O'Gorman
• [LEDE-DEV] [PATCH v3 3/3] ramips: add support for Buffalo WCR-1166DS   FUKAUMI Naoki
• [LEDE-DEV] [PATCH v3 3/5] sunxi: add sysupgrade support   Yousong Zhou
• [LEDE-DEV] [PATCH v3 4/5] sunxi: use fwtool for checking sdcard images   Yousong Zhou
• [LEDE-DEV] [PATCH v3 5/5] sunxi: define a Default profile   Yousong Zhou
• [LEDE-DEV] [PATCH v3 5/5] sunxi: define a Default profile   Felix Fietkau
• [LEDE-DEV] [PATCH v3] Curl: fix HTTPS network timeouts with OpenSSL   Stijn Segers
• [LEDE-DEV] [PATCH v3] leds-apu2: Add PC Engines APU2 LED driver   Chris Blake
• [LEDE-DEV] [PATCH v3] procd: update procd.sh to disallow signal-numbers, enforce signal-names   Bastian Bittorf
• [LEDE-DEV] [PATCH v4 0/6] sunxi: rework image build and sysupgrade support   Yousong Zhou
• [LEDE-DEV] [PATCH v4 0/6] sunxi: rework image build and sysupgrade support   Felix Fietkau
• [LEDE-DEV] [PATCH v4 0/6] sunxi: rework image build and sysupgrade support   Yousong Zhou
• [LEDE-DEV] [PATCH v4 1/3] firmware-utils: improve tools for Buffalo DHP series   FUKAUMI Naoki
• [LEDE-DEV] [PATCH v4 1/6] sunxi: convert to new image generation method   Yousong Zhou
• [LEDE-DEV] [PATCH v4 2/3] bcm53xx: build factory images for WZR-900DHP series   FUKAUMI Naoki
• [LEDE-DEV] [PATCH v4 2/6] sunxi: make sdcard image with squashfs as rootfs   Yousong Zhou
• [LEDE-DEV] [PATCH v4 3/3] ramips: add support for Buffalo WCR-1166DS   FUKAUMI Naoki
• [LEDE-DEV] [PATCH v4 3/6] sunxi: add sysupgrade support   Yousong Zhou
• [LEDE-DEV] [PATCH v4 4/6] sunxi: use fwtool for checking sdcard images   Yousong Zhou
• [LEDE-DEV] [PATCH v4 5/6] uboot-sunxi: add uboot-sunxi-all for selecting all other variants   Yousong Zhou
• [LEDE-DEV] [PATCH v4 6/6] sunxi: define a Default profile   Yousong Zhou
• [LEDE-DEV] [procd] Using "procd_set_param file" on a directory   Baptiste Jonglez
• [LEDE-DEV] [procd] Using "procd_set_param file" on a directory   Felix Fietkau
• [LEDE-DEV] [procd] Using "procd_set_param file" on a directory   Jo-Philipp Wich
• [LEDE-DEV] [procd] Using "procd_set_param file" on a directory   Baptiste Jonglez
• [LEDE-DEV] [procd] Using "procd_set_param file" on a directory   Baptiste Jonglez
• [LEDE-DEV] [procd] Using "procd_set_param file" on a directory   Jo-Philipp Wich
• [LEDE-DEV] [RFC] [PULL REQUEST] rt2x00 patches from OpenWrt.org   Daniel Golle
• [LEDE-DEV] [RFC] [PULL REQUEST] rt2x00 patches from OpenWrt.org   Kalle Valo
• [LEDE-DEV] [RFC] [PULL REQUEST] rt2x00 patches from OpenWrt.org   Stanislaw Gruszka
• [LEDE-DEV] [RFC] [PULL REQUEST] rt2x00 patches from OpenWrt.org   Daniel Golle
• [LEDE-DEV] [RFC] [PULL REQUEST] rt2x00 patches from OpenWrt.org   Johannes Berg
• [LEDE-DEV] [RFC] [PULL REQUEST] rt2x00 patches from OpenWrt.org   Daniel Golle
• [RFC] [PULL REQUEST] rt2x00 patches from OpenWrt.org   Christian Lamparter
• [LEDE-DEV] [RFC] [PULL REQUEST] rt2x00 patches from OpenWrt.org   Kalle Valo
• [LEDE-DEV] [RFC PATCH odhcpd] config: respect ignore uci option   Jo-Philipp Wich
• [LEDE-DEV] [RFC PATCH odhcpd] config: respect ignore uci option   Karl Palsson
• [LEDE-DEV] [RFC PATCH odhcpd] config: respect ignore uci option   Stijn Tintel
• [LEDE-DEV] [RFC PATCH odhcpd] config: respect ignore uci option   Hans Dedecker
• [LEDE-DEV] Adding new people in patchwork?   Florian Fainelli
• [LEDE-DEV] Adding new people in patchwork?   John Crispin
• [LEDE-DEV] Adding new people in patchwork?   Florian Fainelli
• [LEDE-DEV] Adding new targets/subtargets   Weedy
• [LEDE-DEV] Adding new targets/subtargets   Philip Prindeville
• [LEDE-DEV] Adding new targets/subtargets   Jo-Philipp Wich
• [LEDE-DEV] Adding new targets/subtargets   Jo-Philipp Wich
• [LEDE-DEV] Adding new targets/subtargets   Jo-Philipp Wich
• [LEDE-DEV] Adding new targets/subtargets   Philip Prindeville
• [LEDE-DEV] Adding new targets/subtargets   Philip Prindeville
• [LEDE-DEV] Adding new targets/subtargets   Philip Prindeville
• [LEDE-DEV] Adding new targets/subtargets   Stefan Lippers-Hollmann
• [LEDE-DEV] Adding new targets/subtargets   Alberto Bursi
• [LEDE-DEV] Adding new targets/subtargets   Felix Fietkau
• [LEDE-DEV] Adding new targets/subtargets   Philip Prindeville
• [LEDE-DEV] Adding new targets/subtargets   Felix Fietkau
• [LEDE-DEV] Adding new targets/subtargets   Philip Prindeville
• [LEDE-DEV] Adding new targets/subtargets   Philip Prindeville
• [LEDE-DEV] All0333CJ LEDE   Florian Wobbe
• [LEDE-DEV] All0333CJ LEDE   Jo-Philipp Wich
• [LEDE-DEV] ar71xx: Detect USB port on Mikrotik RB750UP   João Chaínho
• [LEDE-DEV] ar71xx: support for Zyxel NWA1121-NI   alexpro
• [LEDE-DEV] ar71xx: support for Zyxel NWA1121-NI   Jo-Philipp Wich
• [LEDE-DEV] Arcadyan VGV7510KW22 - Build/make fail   Dennis Schneck
• [LEDE-DEV] ath9k airtime fairness stabiity issues?   Dave Taht
• [LEDE-DEV] ath9k airtime fairness stabiity issues?   Felix Fietkau
• [LEDE-DEV] ath9k airtime fairness stabiity issues?   Dave Taht
• [LEDE-DEV] ath9k crashes   Koen Vandeputte
• [LEDE-DEV] ath9k crashes   Felix Fietkau
• [LEDE-DEV] Babeld now has procd support on OpenWRT/LEDE   Baptiste Jonglez
• [LEDE-DEV] Backporting some mac80211 fixes   Koen Vandeputte
• [LEDE-DEV] Backporting some mac80211 fixes   Felix Fietkau
• [LEDE-DEV] Blackhole routes and other tidbits on the network configuration wiki page   Alberto Bursi
• [LEDE-DEV] bluez 5.38 bluetoothd and/or bluetoothctl not working   Tim Harvey
• [LEDE-DEV] Bounty: simplify extracting/restoring kernel .config   Philip Prindeville
• [LEDE-DEV] Bounty: simplify extracting/restoring kernel .config   Felix Fietkau
• [LEDE-DEV] Branching LEDE 17.01   Jo-Philipp Wich
• [LEDE-DEV] Branching LEDE 17.01   Daniel Golle
• [LEDE-DEV] Branching LEDE 17.01   Ted Hess
• [LEDE-DEV] Branching LEDE 17.01   Jo-Philipp Wich
• [LEDE-DEV] Branching LEDE 17.01 / problems with ath9k   Bastian Bittorf
• [LEDE-DEV] Branching LEDE 17.01 / problems with ath9k   Thomas Endt
• [LEDE-DEV] Branching LEDE 17.01 / problems with ath9k   Bastian Bittorf
• [LEDE-DEV] brcm47xx legacy image building issues   Eric Masson
• [LEDE-DEV] brcm47xx legacy image building issues   Rafał Miłecki
• [LEDE-DEV] brcm47xx legacy image building issues   Eric Masson
• [LEDE-DEV] brcm47xx legacy image building issues   Alberto Bursi
• [LEDE-DEV] Breaking compatibility with pre-1.5.1 babeld on OpenWRT/LEDE   Baptiste Jonglez
• [LEDE-DEV] Bug in ipkg?   Philip Prindeville
• [LEDE-DEV] Bug in ipkg?   Philip Prindeville
• [LEDE-DEV] Bug in ipkg?   Philip Prindeville
• [LEDE-DEV] Bug in ipkg?   Philip Prindeville
• [LEDE-DEV] bugtracker / subscribe to all new tickets   Bastian Bittorf
• [LEDE-DEV] bugtracker / subscribe to all new tickets   Hannu Nyman
• [LEDE-DEV] bugtracker / subscribe to all new tickets   Bastian Bittorf
• [LEDE-DEV] Build error Arcadyan VGV7510KW22(NOR) / o2 6431 - asterisk13   Dennis Schneck
• [LEDE-DEV] Build error Arcadyan VGV7510KW22(NOR) / o2 6431 - asterisk13   Baptiste Jonglez
• [LEDE-DEV] Build error Arcadyan VGV7510KW22(NOR) / o2 6431 - asterisk13   Dennis Schneck
• [LEDE-DEV] dhcpv6-pd subnet allocation?   Dave Taht
• [LEDE-DEV] dhcpv6-pd subnet allocation?   Hans Dedecker
• [LEDE-DEV] dhcpv6-pd subnet allocation?   Dave Taht
• [LEDE-DEV] Difference between AutoLoad vs. AutoProbe for kernel modules?   Baptiste Jonglez
• [LEDE-DEV] Difference between AutoLoad vs. AutoProbe for kernel modules?   Lucian Cristian
• [LEDE-DEV] Difference between AutoLoad vs. AutoProbe for kernel modules?   John Crispin
• [LEDE-DEV] Difference between AutoLoad vs. AutoProbe for kernel modules?   Baptiste Jonglez
• [LEDE-DEV] Difference between AutoLoad vs. AutoProbe for kernel modules?   Jo-Philipp Wich
• [LEDE-DEV] Difference between AutoLoad vs. AutoProbe for kernel modules?   John Crispin
• [LEDE-DEV] Difference between AutoLoad vs. AutoProbe for kernel modules?   Zefir Kurtisi
• [LEDE-DEV] Difference between AutoLoad vs. AutoProbe for kernel modules?   John Crispin
• [LEDE-DEV] Difference between AutoLoad vs. AutoProbe for kernel modules?   Yousong Zhou
• [LEDE-DEV] Difference between AutoLoad vs. AutoProbe for kernel modules?   John Crispin
• [LEDE-DEV] Difference between AutoLoad vs. AutoProbe for kernel modules?   Yousong Zhou
• [LEDE-DEV] Difference between AutoLoad vs. AutoProbe for kernel modules?   Baptiste Jonglez
• [LEDE-DEV] Difference between AutoLoad vs. AutoProbe for kernel modules?   Jason A. Donenfeld
• [LEDE-DEV] Difference between AutoLoad vs. AutoProbe for kernel modules?   Jason A. Donenfeld
• [LEDE-DEV] Draft LEDE home page available   Rich Brown
• [LEDE-DEV] externalizing package management?   Oswald Buddenhagen
• [LEDE-DEV] externalizing package management?   Stefan Lippers-Hollmann
• [LEDE-DEV] externalizing package management?   Stefan Lippers-Hollmann
• [LEDE-DEV] externalizing package management?   Oswald Buddenhagen
• [LEDE-DEV] externalizing package management?   Jo-Philipp Wich
• [LEDE-DEV] externalizing package management?   Oswald Buddenhagen
• [LEDE-DEV] externalizing package management?   info at rauberhaus.de
• [LEDE-DEV] externalizing package management?   Felix Fietkau
• [LEDE-DEV] externalizing package management?   Jo-Philipp Wich
• [LEDE-DEV] externalizing package management?   Oswald Buddenhagen
• [LEDE-DEV] Fading out PolarSSL   Jo-Philipp Wich
• [LEDE-DEV] Fading out PolarSSL   Toke Høiland-Jørgensen
• [LEDE-DEV] Fading out PolarSSL   Daniel Engberg
• [LEDE-DEV] Fading out PolarSSL   Hannu Nyman
• [LEDE-DEV] Fading out PolarSSL   Etienne Champetier
• [LEDE-DEV] Fading out PolarSSL   Steven Barth
• [LEDE-DEV] Fading out PolarSSL   Ted Hess
• [LEDE-DEV] FCC killing open platforms and inovations   Petr Štetiar
• [LEDE-DEV] FCC killing open platforms and inovations   Sven Eckelmann
• [LEDE-DEV] Files across reboot are not persisiting   K.Mani
• [LEDE-DEV] Files across reboot are not persisiting   Felix Fietkau
• [LEDE-DEV] Finding Release snapshots/URLs for the "Release"   Rich Brown
• [LEDE-DEV] Finding Release snapshots/URLs for the "Release"   Jo-Philipp Wich
• [LEDE-DEV] Finding Release snapshots/URLs for the "Release"   Rich Brown
• [LEDE-DEV] Finished porting of chan_lantiq to asterisk11 and asterisk13   Stefan Koch
• [LEDE-DEV] firmware file naming   Thomas Endt
• [LEDE-DEV] first commits in lede tree   Luka Perkov
• [LEDE-DEV] forum limitations   David Lang
• [LEDE-DEV] forum limitations   Ted Hess
• [LEDE-DEV] Fw: [openwrt/luci] BUG: DHCP Leases "infinite" time shows as "expired" not as "unlimited" in IPv4 (#963)   Daniel Dickinson
• [LEDE-DEV] Fw: [openwrt/luci] BUG: DHCP Leases "infinite" time shows as "expired" not as "unlimited" in IPv4 (#963)   Hans Dedecker
• [LEDE-DEV] Fwd: [OpenWrt-Devel] Data_Model_Structure_Proposal_for_OpenWRT   Weedy
• [LEDE-DEV] Host staging changes breaking packages feed   Daniel Dickinson
• [LEDE-DEV] Host staging changes breaking packages feed   Patrick Vorlicek
• [LEDE-DEV] how to make sysupgrade not drop user-installed packages   Oswald Buddenhagen
• [LEDE-DEV] how to make sysupgrade not drop user-installed packages   Magnus Kroken
• [LEDE-DEV] how to make sysupgrade not drop user-installed packages   Luiz Angelo Daros de Luca
• [LEDE-DEV] how to make sysupgrade not drop user-installed packages   Oswald Buddenhagen
• [LEDE-DEV] how to make sysupgrade not drop user-installed packages   Jo-Philipp Wich
• [LEDE-DEV] how to make sysupgrade not drop user-installed packages   Oswald Buddenhagen
• [LEDE-DEV] how to make sysupgrade not drop user-installed packages   Jo-Philipp Wich
• [LEDE-DEV] how to make sysupgrade not drop user-installed packages   Oswald Buddenhagen
• image: when using the new image build code, gzip ext4 images by default   Christian Lamparter
• [LEDE-DEV] Image Wizard for LEDE?   Jo-Philipp Wich
• [LEDE-DEV] Image Wizard for LEDE?   Alberto Bursi
• [LEDE-DEV] Image Wizard for LEDE?   Ufo
• [LEDE-DEV] iw scan can not work   Xue Liu
• [LEDE-DEV] iw scan can not work   Yousong Zhou
• [LEDE-DEV] LEDE-17.01 Final Release Notes available   Rich Brown
• [LEDE-DEV] LEDE-17.01 Final Release Notes available   Jaap Buurman
• [LEDE-DEV] LEDE-17.01 Final Release Notes available   Rich Brown
• [LEDE-DEV] LEDE-17.01 Final Release Notes available   Weedy
• [LEDE-DEV] LEDE-17.01 Final Release Notes available   Jaap Buurman
• [LEDE-DEV] LEDE-17.01 Final Release Notes available   Toke Høiland-Jørgensen
• [LEDE-DEV] LEDE-17.01 Final Release Notes available   Jaap Buurman
• [LEDE-DEV] LEDE-17.01 Final Release Notes available   Toke Høiland-Jørgensen
• [LEDE-DEV] LEDE-17.01 Final Release Notes available   Toke Høiland-Jørgensen
• [LEDE-DEV] LEDE-17.01 Final Release Notes available   Jaap Buurman
• [LEDE-DEV] LEDE-17.01 Final Release Notes available   Toke Høiland-Jørgensen
• [LEDE-DEV] LEDE-17.01 Final Release Notes available   Dave Täht
• [LEDE-DEV] LEDE-17.01 Final Release Notes available   Baptiste Jonglez
• [LEDE-DEV] LEDE-17.01 Final Release Notes available   David Woodhouse
• [LEDE-DEV] LEDE 17.01 branched   Jo-Philipp Wich
• [LEDE-DEV] LEDE 17.01 branched   Rich Brown
• [LEDE-DEV] LEDE 17.01 branched/Release Notes improving   Rich Brown
• [LEDE-DEV] LEDE Fails to build   Mauro M.
• [LEDE-DEV] LEDE Fails to build   Magnus Kroken
• [LEDE-DEV] LEDE Fails to build   Mauro M.
• [LEDE-DEV] LEDE static routes not working when masquerade/firewall is on   Mauro Mozzarelli
• [LEDE-DEV] LEDE v17.01.0-rc1   Jo-Philipp Wich
• [LEDE-DEV] Linksys WRT1900ACS wifi issues with recent LEDE build   Kevin Beranek
• [LEDE-DEV] mac80211 / wireless drivers update   Felix Fietkau
• [LEDE-DEV] mac80211 / wireless drivers update   Sven Schönhoff
• [LEDE-DEV] mac80211 / wireless drivers update   Tim Harvey
• [LEDE-DEV] mac80211 / wireless drivers update   Felix Fietkau
• [LEDE-DEV] Making staging tree appear on cgit?   Florian Fainelli
• [LEDE-DEV] Making staging tree appear on cgit?   Ted Hess
• [LEDE-DEV] Maybe inconsistency on ramips/rt5350.dtsi intc resets   Luiz Angelo Daros de Luca
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Felix Fietkau
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Nishant Sharma
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Felix Fietkau
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   David Goodenough
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Stijn Tintel
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Cezary Jackiewicz
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Felix Fietkau
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Mathias Kresin
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Felix Fietkau
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Cezary Jackiewicz
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Felix Fietkau
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Cezary Jackiewicz
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Felix Fietkau
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Cezary Jackiewicz
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Felix Fietkau
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   tim green
• [LEDE-DEV] MikroTik RouterBoard ar71xx changes   Felix Fietkau
• [LEDE-DEV] netifd: "bridge: disable IGMP snooping by default"   Linus Lüssing
• [LEDE-DEV] netifd: "bridge: disable IGMP snooping by default"   Dave Täht
• [LEDE-DEV] netifd: "bridge: disable IGMP snooping by default"   Eric Luehrsen
• [LEDE-DEV] netifd: "bridge: disable IGMP snooping by default"   Daniel Dickinson
• [LEDE-DEV] netifd: "bridge: disable IGMP snooping by default"   Dave Täht
• [LEDE-DEV] netifd: "bridge: disable IGMP snooping by default"   Felix Fietkau
• [LEDE-DEV] netifd: "bridge: disable IGMP snooping by default"   Linus Lüssing
• [LEDE-DEV] netifd: "bridge: disable IGMP snooping by default"   Felix Fietkau
• [LEDE-DEV] newbie opkg upgrading questions..   B. Cook
• [LEDE-DEV] newbie opkg upgrading questions..   Yousong Zhou
• [LEDE-DEV] newbie opkg upgrading questions..   Bastian Bittorf
• [LEDE-DEV] newbie opkg upgrading questions..   B. Cook
• [LEDE-DEV] newbie opkg upgrading questions..   Bastian Bittorf
• [LEDE-DEV] Open and secure firmware for Quectel 4G modems [Was: Re: Quectel EC20 QMI autoconnect issues [Was: Re: [LEDE-DEV, 3/3, v3] uqmi: Prevent 'POLICY MISMATCH' error.]]   Petr Štetiar
• [LEDE-DEV] Open and secure firmware for Quectel 4G modems [Was: Re: Quectel EC20 QMI autoconnect issues [Was: Re: [LEDE-DEV, 3/3, v3] uqmi: Prevent 'POLICY MISMATCH' error.]]   Bjørn Mork
• [LEDE-DEV] Open and secure firmware for Quectel 4G modems [Was: Re: Quectel EC20 QMI autoconnect issues [Was: Re: [LEDE-DEV, 3/3, v3] uqmi: Prevent 'POLICY MISMATCH' error.]]   Petr Štetiar
• [LEDE-DEV] Open and secure firmware for Quectel 4G modems [Was: Re: Quectel EC20 QMI autoconnect issues [Was: Re: [LEDE-DEV, 3/3, v3] uqmi: Prevent 'POLICY MISMATCH' error.]]   Matti Laakso
• [LEDE-DEV] Open and secure firmware for Quectel 4G modems [Was: Re: Quectel EC20 QMI autoconnect issues [Was: Re: [LEDE-DEV, 3/3, v3] uqmi: Prevent 'POLICY MISMATCH' error.]]   Bjørn Mork
• [LEDE-DEV] Open and secure firmware for Quectel 4G modems [Was: Re: Quectel EC20 QMI autoconnect issues [Was: Re: [LEDE-DEV, 3/3, v3] uqmi: Prevent 'POLICY MISMATCH' error.]]   Harald Welte
• [LEDE-DEV] Open and secure firmware for Quectel 4G modems [Was: Re: Quectel EC20 QMI autoconnect issues [Was: Re: [LEDE-DEV, 3/3, v3] uqmi: Prevent 'POLICY MISMATCH' error.]]   Harald Welte
• [LEDE-DEV] Open and secure firmware for Quectel 4G modems [Was: Re: Quectel EC20 QMI autoconnect issues [Was: Re: [LEDE-DEV, 3/3, v3] uqmi: Prevent 'POLICY MISMATCH' error.]]   Bjørn Mork
• [LEDE-DEV] OpenWrt/LEDE job offer (devolo AG)   Guenther Kelleter
• [LEDE-DEV] OpenWRT Quantenna radio driver for Netgear Nighthawk X4 R7500 (Tehttps://www.autistici.org/webmail/3/?_task=mail&_action=compose&_id=12641242995880cdf530713#stedon Designated Driver r49274)   Stijn Segers
• [LEDE-DEV] OpenWRT Quantenna radio driver for Netgear Nighthawk X4 R7500 (Testedon Designated Driver r49274)   Patrick Martin
• [LEDE-DEV] OpenWRT Quantenna radio driver for Netgear Nighthawk X4 R7500 (Tested on Designated Driver r49274)   Patrick Martin
• [LEDE-DEV] Patch to iwinfo to add the ability to load backends from external .so modules   Patrick Martin
• [LEDE-DEV] Patch to iwinfo to add the ability to load backends from external .so modules   Patrick Martin
• [LEDE-DEV] Patch to iwinfo to add the ability to load backends from external .so modules   Daniel Golle
• [LEDE-DEV] per-cpu IRQ stack on MIPS   Jason A. Donenfeld
• [LEDE-DEV] per-cpu IRQ stack on MIPS   Felix Fietkau
• [LEDE-DEV] per-cpu IRQ stack on MIPS   Jason A. Donenfeld
• [LEDE-DEV] per-cpu IRQ stack on MIPS   Felix Fietkau
• [LEDE-DEV] per-cpu IRQ stack on MIPS   Jason A. Donenfeld
• [LEDE-DEV] per-cpu IRQ stack on MIPS   Jason A. Donenfeld
• [LEDE-DEV] per-cpu IRQ stack on MIPS   Felix Fietkau
• [LEDE-DEV] per-device rootfs generated on buildbots   Daniel Golle
• [LEDE-DEV] per-device rootfs generated on buildbots   Mathias Kresin
• [LEDE-DEV] PHP at build time   Philip Prindeville
• [LEDE-DEV] procd & custom reload support   Rafał Miłecki
• [LEDE-DEV] procd & custom reload support   Jo-Philipp Wich
• [LEDE-DEV] procd & custom reload support   Matthias Schiffer
• [LEDE-DEV] procd & custom reload support   Jo-Philipp Wich
• [LEDE-DEV] procd & custom reload support   Bastian Bittorf
• [LEDE-DEV] procd question, something causing high cpu usage   Baptiste Jonglez
• [LEDE-DEV] procd question, something causing high cpu usage   Sebastian Kemper
• [LEDE-DEV] python3 compile error   Xue Liu
• [LEDE-DEV] Quectel EC20 QMI autoconnect issues [Was: Re: [LEDE-DEV, 3/3, v3] uqmi: Prevent 'POLICY MISMATCH' error.]   Petr Štetiar
• [LEDE-DEV] Quectel EC20 QMI autoconnect issues [Was: Re: [LEDE-DEV, 3/3, v3] uqmi: Prevent 'POLICY MISMATCH' error.]   Matti Laakso
• [LEDE-DEV] questions about RB953GS on LEDE   Gui Iribarren
• [LEDE-DEV] questions about RB953GS on LEDE   Felix Fietkau
• [LEDE-DEV] Race condition in openssh build?   Philip Prindeville
• [LEDE-DEV] ramips: splitting mt76 into kmod and firmware package?   Joseph C. Lehner
• [LEDE-DEV] Release Candidate Test Plan - first draft   Rich Brown
• [LEDE-DEV] Release Candidate Test Plan - first draft   Daniel Golle
• [LEDE-DEV] Release Candidate Test Plan - first draft   Baptiste Jonglez
• [LEDE-DEV] Release Planning - Current Status?   Rich Brown
• [LEDE-DEV] Release Planning - Current Status?   Jo-Philipp Wich
• [LEDE-DEV] Release Planning - Current Status?   Rich Brown
• [LEDE-DEV] RFC: removing opkg S/MIME support   Felix Fietkau
• [LEDE-DEV] rt5350: second gpio bank   Giuseppe Lippolis
• [LEDE-DEV] RT5350 spi half duplex?   Giuseppe Lippolis
• [LEDE-DEV] s/dnsmasq/unbound+odhcpd/   Dan Lüdtke
• [LEDE-DEV] s/dnsmasq/unbound+odhcpd/   Daniel Dickinson
• [LEDE-DEV] s/dnsmasq/unbound+odhcpd/   Eric Luehrsen
• [LEDE-DEV] s/dnsmasq/unbound+odhcpd/   Daniel Dickinson
• [LEDE-DEV] s/dnsmasq/unbound+odhcpd/   Eric Luehrsen
• [LEDE-DEV] Scripting builds... how to?   Petr Štetiar
• [LEDE-DEV] Scripting builds... how to?   Sven Roederer
• [LEDE-DEV] SHA256 hashes for packages   Heinrich Schuchardt
• [LEDE-DEV] SHA256 hashes for packages   Alberto Bursi
• [LEDE-DEV] SHA256 hashes for packages   Hannu Nyman
• [LEDE-DEV] spi-tools failure   Giuseppe Lippolis
• [LEDE-DEV] spi-tools failure   Giuseppe Lippolis
• [LEDE-DEV] spi-tools failure   Giuseppe Lippolis
• [LEDE-DEV] sqm-scripts change GitHub link to https:// instead of git://   Nick Kamenyitzky
• [LEDE-DEV] sqm-scripts change GitHub link to https:// instead of git://   Etienne Champetier
• [LEDE-DEV] sqm-scripts change GitHub link to https:// instead of git://   Alberto Bursi
• [LEDE-DEV] sunxi: Bananapi/pro audio codec default disabled in device-tree   xige
• [LEDE-DEV] Support for tplink 710 v2.1   Ufo
• [LEDE-DEV] Support for tplink 710 v2.1   Ufo
• [LEDE-DEV] Syslog-ng Makefile typo   Milan Kočvara
• [LEDE-DEV] Syslog-ng Makefile typo   Philip Prindeville
• [LEDE-DEV] Syslog-ng Makefile typo   Philip Prindeville
• [LEDE-DEV] Syslog-ng Makefile typo   Milan Kočvara
• [LEDE-DEV] Syslog-ng Makefile typo   John Crispin
• [LEDE-DEV] Syslog-ng Makefile typo   Philip Prindeville
• [LEDE-DEV] Syslog-ng Makefile typo   Philip Prindeville
• [LEDE-DEV] Syslog-ng Makefile typo   Philip Prindeville
• [LEDE-DEV] Talks between OpenWrt and LEDE   Daniel Dickinson
• [LEDE-DEV] Talks between OpenWrt and LEDE   Daniel Dickinson
• [LEDE-DEV] Talks between OpenWrt and LEDE   Daniel (bovi) Bovensiepen
• [LEDE-DEV] Talks between OpenWrt and LEDE   David Lang
• [LEDE-DEV] Talks between OpenWrt and LEDE   Daniel (bovi) Bovensiepen
• [LEDE-DEV] target-specific defaults   Daniel Dickinson
• [LEDE-DEV] telephony: adding telephony functionality   Giuseppe Lippolis
• [LEDE-DEV] the ipv6 issues and the notions of timer   Dave Taht
• [LEDE-DEV] the ipv6 issues and the notions of timer   Bastian Bittorf
• [LEDE-DEV] the ipv6 issues and the notions of timer   Dave Taht
• [LEDE-DEV] the ipv6 issues and the notions of timer   Karl Palsson
• [LEDE-DEV] the ipv6 issues and the notions of timer   Bastian Bittorf
• [LEDE-DEV] the ipv6 issues and the notions of timer   Petr Štetiar
• [LEDE-DEV] ubus network restart issue?   Matthew McClintock
• [LEDE-DEV] upstreaming (most) rt2x00 patches   Daniel Golle

Last message date: Tue Jan 31 23:23:10 PST 2017
Archived on: Tue Jan 31 23:23:39 PST 2017

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...