[LEDE-DEV] MikroTik RouterBoard ar71xx changes

Felix Fietkau nbd at nbd.name
Wed Jan 11 04:04:02 PST 2017


On 2017-01-11 12:59, Cezary Jackiewicz wrote:
> Dnia 2017-01-11, o godz. 12:27:48
> Felix Fietkau <nbd at nbd.name> napisał(a):
> 
>> Seems that the upstream spi-rb4xx.c driver does not work as-is. I've
>> pushed a less intrusive fix now.
> 
> Looks good:
> 
> [    7.785083] m25p80 spi0.0: pm25lv512 (64 Kbytes)
> [    7.840505] Creating 4 MTD partitions on "spi0.0":
> [    7.897972] 0x000000000000-0x00000000b000 : "routerboot"
> [    7.966301] 0x00000000b000-0x00000000c000 : "hard_config"
> [    8.033912] 0x00000000d000-0x00000000f000 : "bios"
> [    8.094198] 0x00000000f000-0x000000010000 : "soft_config"
> [    8.161987] NAND flash driver for RouterBoard 4xx series version 0.2.0
> [    8.240717] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
> [    8.316902] nand: Samsung NAND 128MiB 3,3V 8-bit
> [    8.372244] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
> [    8.463047] Scanning device for bad blocks
> [    8.999658] Creating 3 MTD partitions on "NAND 128MiB 3,3V 8-bit":
> [    9.073823] 0x000000000000-0x000000040000 : "booter"
> [    9.135610] 0x000000040000-0x000000400000 : "kernel"
> [    9.197817] 0x000000400000-0x000008000000 : "ubi"
> 
> Sysupgrade works fine - from initramfs and again after boot
> from flash. (rb411u)
Thanks for testing. I've pushed the driver fixes to master now.

- Felix




More information about the Lede-dev mailing list