[LEDE-DEV] MikroTik RouterBoard ar71xx changes

Cezary Jackiewicz cezary.jackiewicz at gmail.com
Wed Jan 11 03:59:28 PST 2017


Dnia 2017-01-11, o godz. 12:27:48
Felix Fietkau <nbd at nbd.name> napisał(a):

> Seems that the upstream spi-rb4xx.c driver does not work as-is. I've
> pushed a less intrusive fix now.

Looks good:

[    7.785083] m25p80 spi0.0: pm25lv512 (64 Kbytes)
[    7.840505] Creating 4 MTD partitions on "spi0.0":
[    7.897972] 0x000000000000-0x00000000b000 : "routerboot"
[    7.966301] 0x00000000b000-0x00000000c000 : "hard_config"
[    8.033912] 0x00000000d000-0x00000000f000 : "bios"
[    8.094198] 0x00000000f000-0x000000010000 : "soft_config"
[    8.161987] NAND flash driver for RouterBoard 4xx series version 0.2.0
[    8.240717] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[    8.316902] nand: Samsung NAND 128MiB 3,3V 8-bit
[    8.372244] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    8.463047] Scanning device for bad blocks
[    8.999658] Creating 3 MTD partitions on "NAND 128MiB 3,3V 8-bit":
[    9.073823] 0x000000000000-0x000000040000 : "booter"
[    9.135610] 0x000000040000-0x000000400000 : "kernel"
[    9.197817] 0x000000400000-0x000008000000 : "ubi"

Sysupgrade works fine - from initramfs and again after boot
from flash. (rb411u)


-- 
Pozdrawiam,
 Cezary Jackiewicz



More information about the Lede-dev mailing list