[LEDE-DEV] MikroTik RouterBoard ar71xx changes

[Cezary Jackiewicz]

Dnia 2017-01-11, o godz. 10:45:35
Felix Fietkau <nbd at nbd.name> napisał(a):

> Cezary, please try the latest version from my staging tree, I just
> pushed a fix for this regression that should hopefully make it work again.



[    8.001462] m25p80 spi0.0: pm25lv512 (64 Kbytes)
[    8.056892] Creating 4 MTD partitions on "spi0.0":
[    8.114276] 0x000000000000-0x00000000b000 : "routerboot"
[    8.182444] 0x00000000b000-0x00000000c000 : "hard_config"
[    8.249876] 0x00000000d000-0x00000000f000 : "bios"
[    8.310003] 0x00000000f000-0x000000010000 : "soft_config"
[    8.377657] NAND flash driver for RouterBoard 4xx series version 0.2.0
[    8.456069] rb4xx-nand rb4xx-nand: unable to request gpio 37
...
[   10.031008] NAND flash driver for RouterBoard 4xx series version 0.2.0
[   10.109408] rb4xx-nand rb4xx-nand: unable to request gpio 37
[   10.182162] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.263224] ehci-platform: EHCI generic platform driver

from:

commit e3b288aecf47947777ba20cc08a10aa544f40237
Author: Felix Fietkau <nbd at nbd.name>
Date:   Wed Jan 11 10:42:04 2017 +0100

    ar71xx: fix RB4xx CPLD SPI device mode setup
    
    Commit af79fdbe4af3 changed the code to use tx_nbits for dual SPI tx
    transfers, however the SPI stack only allows this when the device mode
    includes the relevant bit as well
    
    Signed-off-by: Felix Fietkau <nbd at nbd.name>



-- 
Pozdrawiam,
 Cezary Jackiewicz