[LEDE-DEV] [PATCH v2 2/3] mtd: bcm47xxpart: add device specific workaround for Buffalo WZR-900DHP

[Naoki FUKAUMI]

hi,

this patch cannot be applied (conflict) and probably is not needed
anymore by following commit,

  "kernel: add pending bcm47xxpart support for failsafe TRX partition"

please drop this patch.

I'll send v3 patch which adds support for Buffalo WCR-1166DS with factory image.

Regards,

On Sat, Dec 24, 2016 at 10:21 PM, FUKAUMI Naoki <naobsd at gmail.com> wrote:
> 2nd trx partition shouldn't be added, otherwise size of 1st trx
> partition won't be set properly.
>
> Signed-off-by: FUKAUMI Naoki <naobsd at gmail.com>
> ---
> Changes in v2:
> - no change
>
>  .../901-mtd-bcm47xxpart-add-device-specific-workarounds.patch     | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-add-device-specific-workarounds.patch b/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-add-device-specific-workarounds.patch
> index 35c6ff7..b724c33 100644
> --- a/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-add-device-specific-workarounds.patch
> +++ b/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-add-device-specific-workarounds.patch
> @@ -17,7 +17,7 @@ Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
>
>   #include <uapi/linux/magic.h>
>
> -@@ -159,6 +160,28 @@ static int bcm47xxpart_parse(struct mtd_
> +@@ -159,6 +160,34 @@ static int bcm47xxpart_parse(struct mtd_
>                         break;
>                 }
>
> @@ -41,6 +41,12 @@ Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
>  +                       */
>  +                      bcm47xxpart_add_part(&parts[curr_part++], "tplink", offset, MTD_WRITEABLE);
>  +                      continue;
> ++              } else if (of_machine_is_compatible("buffalo,wzr-900dhp") && offset == 0x2100000) {
> ++                      /*
> ++                       * 2nd trx partition shouldn't be added, otherwise size
> ++                       * of 1st trx partition won't be set properly.
> ++                       */
> ++                      continue;
>  +              }
>  +
>                 /* Read beginning of the block */
> --
> 2.7.4
>