[LEDE-DEV] [PATCHv2] ar71xx: add support for PQI Air Pen
YuheiOKAWA
tochiro.srchack at gmail.com
Tue Jan 10 01:47:19 PST 2017
SoC: AR9331
Ethernet x1, Wireless 2.4G, uSD card slot x1.
USB Power, include Li-Po Battery.
Signed-off-by: YuheiOKAWA <tochiro.srchack at gmail.com>
Changes in v2:
alphabetical ordering, tabs fron spaces.
---
target/linux/ar71xx/base-files/etc/board.d/01_leds | 4 +
.../linux/ar71xx/base-files/etc/board.d/02_network | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ar71xx/config-4.4 | 1 +
.../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 10 +++
target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
.../files/arch/mips/ath79/mach-pqi-air-pen.c | 99 ++++++++++++++++++++++
.../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
target/linux/ar71xx/image/generic.mk | 11 +++
10 files changed, 132 insertions(+)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 5a2bf0c..14d9b3c 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -427,6 +427,10 @@ omy-x1)
ucidef_set_led_default "power" "POWER" "omy:green:power" "1"
ucidef_set_led_default "wan" "WAN" "omy:green:wan" "eth0"
;;
+pqi-air-pen)
+ ucidef_set_led_wlan "wlan" "WLAN" "pqi-air-pen:blue:wlan" "phy0tpt"
+ ucidef_set_led_default "wps" "WPS" "pqi-air-pen:blue:wps" "0"
+ ;;
qihoo-c301)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt"
;;
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 66274db..89ab6f5 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -83,6 +83,7 @@ ar71xx_setup_interfaces()
mr900|\
mr900v2|\
mynet-rext|\
+ pqi-air-pen|\
rb-411|\
rb-911g-2hpnd|\
rb-911g-5hpacd|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 1b30f4d..33925eb 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -775,6 +775,9 @@ ar71xx_board_detect() {
*"PB44 reference board")
name="pb44"
;;
+ *"PQI Air Pen")
+ name="pqi-air-pen"
+ ;;
*"Qihoo 360 C301")
name="qihoo-c301"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 6341a31..c232ea9 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -222,6 +222,7 @@ platform_check_image() {
nanostation-m-xw|\
nanostation-m|\
nbg460n_550n_550nh|\
+ pqi-air-pen|\
rocket-m-ti|\
rocket-m-xw|\
rocket-m|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 4b2f736..129af79 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -136,6 +136,7 @@ CONFIG_ATH79_MACH_OMY_X1=y
CONFIG_ATH79_MACH_ONION_OMEGA=y
CONFIG_ATH79_MACH_PB42=y
CONFIG_ATH79_MACH_PB44=y
+CONFIG_ATH79_MACH_PQI_AIR_PEN=y
CONFIG_ATH79_MACH_QIHOO_C301=y
CONFIG_ATH79_MACH_R6100=y
# CONFIG_ATH79_MACH_RB2011 is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 21d6b51..34042d0 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -243,6 +243,16 @@ config ATH79_MACH_ESR1750
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_PQI_AIR_PEN
+ bool "PQI Air Pen"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_SOM9331
bool "SOM9331 support"
select SOC_AR933X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 6384c06..e0bac16 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -140,6 +140,7 @@ obj-$(CONFIG_ATH79_MACH_OMY_X1) += mach-omy-x1.o
obj-$(CONFIG_ATH79_MACH_ONION_OMEGA) += mach-onion-omega.o
obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
+obj-$(CONFIG_ATH79_MACH_PQI_AIR_PEN) += mach-pqi-air-pen.o
obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o
obj-$(CONFIG_ATH79_MACH_R6100) += mach-r6100.o
obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c
new file mode 100644
index 0000000..56769bf
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c
@@ -0,0 +1,99 @@
+/*
+ * PQI Air Pen stick support
+ *
+ * Copyright (C) 2016 YuheiOKAWA <tochiro.srchack at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define PQI_AIR_PEN_GPIO_LED_WLAN 0
+#define PQI_AIR_PEN_GPIO_LED_WPS 23
+
+#define PQI_AIR_PEN_GPIO_BTN_WPS 22
+#define PQI_AIR_PEN_GPIO_BTN_RESET 12
+
+#define PQI_AIR_PEN_KEYS_POLL_INTERVAL 20 /* msecs */
+#define PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL (3 * PQI_AIR_PEN_KEYS_POLL_INTERVAL)
+
+#define PQI_AIR_PEN_WMAC_CALDATA_OFFSET 0x1000
+#define PQI_AIR_PEN_LAN_MAC_OFFSET 0x1002
+#define PQI_AIR_PEN_WMAC_MAC_OFFSET 0x1002
+
+static struct gpio_led pqi_air_pen_leds_gpio[] __initdata = {
+ {
+ .name = "pqi-air-pen:blue:wlan",
+ .gpio = PQI_AIR_PEN_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+ {
+ .name = "pqi-air-pen:blue:wps",
+ .gpio = PQI_AIR_PEN_GPIO_LED_WPS,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button pqi_air_pen_gpio_keys[] __initdata = {
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PQI_AIR_PEN_GPIO_BTN_WPS,
+ .active_low = 0,
+ },
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PQI_AIR_PEN_GPIO_BTN_RESET,
+ .active_low = 0,
+ },
+};
+
+static void __init pqi_air_pen_setup(void)
+{
+ /* ART base address */
+ u8 *art = (u8 *) KSEG1ADDR(0x9f050000);
+
+ /* register flash. */
+ ath79_register_m25p80(NULL);
+
+ /* register wireless mac with cal data */
+ ath79_register_wmac(art + PQI_AIR_PEN_WMAC_CALDATA_OFFSET, art + PQI_AIR_PEN_WMAC_MAC_OFFSET);
+
+ /* false PHY_SWAP and PHY_ADDR_SWAP bits */
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ /* register gpio LEDs and keys */
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(pqi_air_pen_leds_gpio),
+ pqi_air_pen_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, PQI_AIR_PEN_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(pqi_air_pen_gpio_keys),
+ pqi_air_pen_gpio_keys);
+
+ /* enable usb */
+ ath79_register_usb();
+
+ /* register eth0 as LAN */
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + PQI_AIR_PEN_LAN_MAC_OFFSET, 0);
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_PQI_AIR_PEN, "PQI-AIR-PEN", "PQI Air Pen",pqi_air_pen_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 9402185..72266f2 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -141,6 +141,7 @@ enum ath79_mach_type {
ATH79_MACH_ONION_OMEGA, /* ONION OMEGA */
ATH79_MACH_PB42, /* Atheros PB42 */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_PQI_AIR_PEN, /* PQI Air Pen */
ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */
ATH79_MACH_R6100, /* NETGEAR R6100 */
ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index e2867e6..9df6417 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -323,6 +323,17 @@ endef
TARGET_DEVICES += cr5000-nocloud
+define Device/pqi-air-pen
+ DEVICE_TITLE := PQI Air Pen
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
+ BOARDNAME = PQI-AIR-PEN
+ IMAGE_SIZE = 7744k
+ CONSOLE = ttyATH0,115200
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(art)ro,64k(NVRAM)ro,7680k(firmware),64k(CONF)
+endef
+
+TARGET_DEVICES += pqi-air-pen
+
define Device/antminer-s1
$(Device/tplink-8mlzma)
DEVICE_TITLE := Antminer-S1
--
1.9.1
More information about the Lede-dev
mailing list