[LEDE-DEV] [PATCH] ar71xx: add Abicom SC300M support
Sebastian Kemper
sebastian_ml at gmx.net
Sun Jan 15 07:10:12 PST 2017
Hi,
Another nitpick, there's a typo in a comment:
"/* GMAC1 is connected tot eh SGMII interface */"
Regards,
Sebastian
Am 15. Januar 2017 14:52:17 MEZ schrieb John Crispin <john at phrozen.org>:
>Hi,
>
>looks good, one minor nitpicks inline
>
>On 11/01/2017 17:19, Conor O'Gorman wrote:
>> Support Abicom International Scorpion SC300M Module
>>
>> QCA9550 700MHz Extended Temperature Range
>> 256MB DDR2
>> 256MB Nand Flash
>> 16MB SPI Flash
>> 802.11a/na/b/g/ng
>> GPIO x 22, USB x2, PCIe x2
>> 10/100/1000 Ethernet
>> 23dBm, Optional Onboard Antenna
>> DC Input, 8-20V DC
>> 85 x 55 mm
>>
>> Signed-off-by: Conor O'Gorman <i at conorogorman.net>
>> ---
>> target/linux/ar71xx/base-files/etc/board.d/01_leds | 1 +
>> .../linux/ar71xx/base-files/etc/board.d/02_network | 1 +
>> target/linux/ar71xx/base-files/etc/diag.sh | 3 +-
>> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
>> .../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
>> target/linux/ar71xx/config-4.4 | 1 +
>> .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 ++
>> target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
>> .../ar71xx/files/arch/mips/ath79/mach-sc300m.c | 132
>+++++++++++++++++++++
>> .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
>> target/linux/ar71xx/image/generic.mk | 10 ++
>> 11 files changed, 164 insertions(+), 1 deletion(-)
>> create mode 100644
>target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c
>>
>> diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds
>b/target/linux/ar71xx/base-files/etc/board.d/01_leds
>> index 5a2bf0c..5be9d4a 100755
>> --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
>> +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
>> @@ -279,6 +279,7 @@ gl-mifi)
>> esac
>> ;;
>> gl-domino|\
>> +sc300m|\
>> wrt160nl)
>> ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
>> ;;
>> diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network
>b/target/linux/ar71xx/base-files/etc/board.d/02_network
>> index 66274db..54069ce 100755
>> --- a/target/linux/ar71xx/base-files/etc/board.d/02_network
>> +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
>> @@ -93,6 +93,7 @@ ar71xx_setup_interfaces()
>> rb-sxt5n|\
>> re450|\
>> rocket-m-xw|\
>> + sc300m |\
>> tl-mr10u|\
>> tl-mr11u|\
>> tl-mr12u|\
>> diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
>b/target/linux/ar71xx/base-files/etc/diag.sh
>> index d060ccf..36f2c43 100644
>> --- a/target/linux/ar71xx/base-files/etc/diag.sh
>> +++ b/target/linux/ar71xx/base-files/etc/diag.sh
>> @@ -295,7 +295,8 @@ get_status_led() {
>> rb-sxt5n)
>> status_led="rb:green:power"
>> ;;
>> - re450)
>> + re450|\
>> + sc300m)
>> status_led="$board:blue:power"
>> ;;
>> routerstation|\
>> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
>b/target/linux/ar71xx/base-files/lib/ar71xx.sh
>> index 1b30f4d..a8bdc67 100755
>> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
>> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
>> @@ -881,6 +881,9 @@ ar71xx_board_detect() {
>> *RW2458N)
>> name="rw2458n"
>> ;;
>> + *SC300M)
>> + name="sc300m"
>> + ;;
>> *"SMART-300")
>> name="smart-300"
>> ;;
>> diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
>b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
>> index 6341a31..74808ef 100755
>> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
>> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
>> @@ -226,6 +226,7 @@ platform_check_image() {
>> rocket-m-xw|\
>> rocket-m|\
>> rw2458n|\
>> + sc300m|\
>> sr3200|\
>> tew-632brp|\
>> tew-712br|\
>> diff --git a/target/linux/ar71xx/config-4.4
>b/target/linux/ar71xx/config-4.4
>> index 4b2f736..daffdea 100644
>> --- a/target/linux/ar71xx/config-4.4
>> +++ b/target/linux/ar71xx/config-4.4
>> @@ -147,6 +147,7 @@ CONFIG_ATH79_MACH_R6100=y
>> # CONFIG_ATH79_MACH_RBSXTLITE is not set
>> CONFIG_ATH79_MACH_RE450=y
>> CONFIG_ATH79_MACH_RW2458N=y
>> +CONFIG_ATH79_MACH_SC300M=y
>> CONFIG_ATH79_MACH_SMART_300=y
>> CONFIG_ATH79_MACH_SOM9331=y
>> CONFIG_ATH79_MACH_SR3200=y
>> diff --git
>a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
>b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
>> index 21d6b51..56889d7 100644
>> --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
>> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
>> @@ -1,3 +1,14 @@
>> +config ATH79_MACH_SC300M
>> + bool "Abicom SC300M board support"
>> + select SOC_QCA955X
>> + select ATH79_DEV_AP9X_PCI if PCI
>> + select ATH79_DEV_ETH
>> + select ATH79_DEV_GPIO_BUTTONS
>> + select ATH79_DEV_LEDS_GPIO
>> + select ATH79_DEV_M25P80
>> + select ATH79_DEV_USB
>> + select ATH79_DEV_WMAC
>
>
>This is not ordered correctly
>
> John
>
>
>> +
>> config ATH79_MACH_ALFA_AP120C
>> bool "ALFA Network AP120C board support"
>> select ATH79_DEV_AP9X_PCI if PCI
>> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
>b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
>> index 6384c06..915b34e 100644
>> --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
>> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
>> @@ -151,6 +151,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
>> obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
>> obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o
>> obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
>> +obj-$(CONFIG_ATH79_MACH_SC300M) += mach-sc300m.o
>> obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o
>> obj-$(CONFIG_ATH79_MACH_SOM9331) += mach-som9331.o
>> obj-$(CONFIG_ATH79_MACH_SR3200) += mach-sr3200.o
>> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c
>b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c
>> new file mode 100644
>> index 0000000..45ec58d
>> --- /dev/null
>> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c
>> @@ -0,0 +1,132 @@
>> +/*
>> + * Abicom International Scorpion SC300M Module support.
>> + *
>> + * Copyright (c) 2012 Qualcomm Atheros
>> + * Copyright (c) 2012-2013 Gabor Juhos <juhosg at openwrt.org>
>> + * Copyright (c) 2017 Conor O'Gorman <i at conorogorman.net>
>> + *
>> + * Permission to use, copy, modify, and/or distribute this software
>for any
>> + * purpose with or without fee is hereby granted, provided that the
>above
>> + * copyright notice and this permission notice appear in all copies.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
>WARRANTIES
>> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
>> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE
>LIABLE FOR
>> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
>DAMAGES
>> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER
>IN AN
>> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
>OUT OF
>> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
>> + *
>> + */
>> +
>> +#include <linux/platform_device.h>
>> +#include <linux/platform_data/phy-at803x.h>
>> +
>> +#include <asm/mach-ath79/ar71xx_regs.h>
>> +
>> +#include "common.h"
>> +#include "pci.h"
>> +#include "dev-ap9x-pci.h"
>> +#include "dev-gpio-buttons.h"
>> +#include "dev-eth.h"
>> +#include "dev-leds-gpio.h"
>> +#include "dev-m25p80.h"
>> +#include "dev-nfc.h"
>> +#include "dev-usb.h"
>> +#include "dev-wmac.h"
>> +#include "machtypes.h"
>> +
>> +#define SC300M_GPIO_LED_WLAN 0
>> +#define SC300M_GPIO_LED_POWER 1
>> +
>> +#define SC300M_GPIO_BTN_RESET 17
>> +
>> +#define SC300M_KEYS_POLL_INTERVAL 20 /* msecs */
>> +#define SC300M_KEYS_DEBOUNCE_INTERVAL (3 *
>SC300M_KEYS_POLL_INTERVAL)
>> +
>> +#define SC300M_MAC0_OFFSET 0
>> +#define SC300M_MAC1_OFFSET 6
>> +#define SC300M_WMAC_CALDATA_OFFSET 0x1000
>> +#define SC300M_PCIE_CALDATA_OFFSET 0x5000
>> +
>> +static struct gpio_led sc300m_leds_gpio[] __initdata = {
>> + {
>> + .name = "sc300m:blue:wlan",
>> + .gpio = SC300M_GPIO_LED_WLAN,
>> + .active_low = 1,
>> + },
>> + {
>> + .name = "sc300m:blue:power",
>> + .gpio = SC300M_GPIO_LED_POWER,
>> + .active_low = 1,
>> + }
>> +};
>> +
>> +static struct gpio_keys_button sc300m_gpio_keys[] __initdata = {
>> + {
>> + .desc = "reset",
>> + .type = EV_KEY,
>> + .code = KEY_RESTART,
>> + .debounce_interval = SC300M_KEYS_DEBOUNCE_INTERVAL,
>> + .gpio = SC300M_GPIO_BTN_RESET,
>> + .active_low = 1,
>> + }
>> +};
>> +
>> +static struct at803x_platform_data at803x_data = {
>> + .disable_smarteee = 1,
>> + .enable_rgmii_rx_delay = 0,
>> + .enable_rgmii_tx_delay = 0,
>> +};
>> +
>> +static struct mdio_board_info sc300m_mdio0_info[] = {
>> + {
>> + .bus_id = "ag71xx-mdio.0",
>> + .phy_addr = 1,
>> + .platform_data = &at803x_data,
>> + },
>> +};
>> +
>> +static void __init sc300m_setup(void)
>> +{
>> + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
>> +
>> + ath79_register_m25p80(NULL);
>> +
>> + ath79_register_leds_gpio(-1, ARRAY_SIZE(sc300m_leds_gpio),
>> + sc300m_leds_gpio);
>> + ath79_register_gpio_keys_polled(-1, SC300M_KEYS_POLL_INTERVAL,
>> + ARRAY_SIZE(sc300m_gpio_keys),
>> + sc300m_gpio_keys);
>> +
>> + ath79_register_usb();
>> + ath79_register_nfc();
>> +
>> + ath79_register_wmac(art + SC300M_WMAC_CALDATA_OFFSET, NULL);
>> +
>> + ath79_register_mdio(0, 0);
>> + mdiobus_register_board_info(sc300m_mdio0_info,
>> + ARRAY_SIZE(sc300m_mdio0_info));
>> +
>> + ath79_init_mac(ath79_eth0_data.mac_addr, art + SC300M_MAC0_OFFSET,
>0);
>> +
>> + ath79_eth0_pll_data.pll_1000 = 0xa6000101;
>> + ath79_eth0_pll_data.pll_100 = 0xa4000101;
>> + /* GMAC0 is connected to the RMGII interface */
>> + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
>> + ath79_eth0_data.phy_mask = 0xF;
>> + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
>> +
>> + ath79_register_eth(0);
>> +
>> + /* GMAC1 is connected tot eh SGMII interface */
>> + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
>> + ath79_eth1_data.speed = SPEED_1000;
>> + ath79_eth1_data.duplex = DUPLEX_FULL;
>> +
>> + ath79_register_eth(1);
>> +
>> + ath79_register_pci();
>> +}
>> +
>> +MIPS_MACHINE(ATH79_MACH_SC300M, "SC300M", "Abicom SC300M",
>sc300m_setup);
>> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
>b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
>> index 9402185..b1e29f9 100644
>> --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
>> +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
>> @@ -168,6 +168,7 @@ enum ath79_mach_type {
>> ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
>> ATH79_MACH_RE450, /* TP-LINK RE450 */
>> ATH79_MACH_RW2458N, /* Redwave RW2458N */
>> + ATH79_MACH_SC300M, /* Abicom SC300M */
>> ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */
>> ATH79_MACH_SOM9331, /* OpenEmbed SOM9331 */
>> ATH79_MACH_SR3200, /* YunCore SR3200 */
>> diff --git a/target/linux/ar71xx/image/generic.mk
>b/target/linux/ar71xx/image/generic.mk
>> index e2867e6..f8445b5 100644
>> --- a/target/linux/ar71xx/image/generic.mk
>> +++ b/target/linux/ar71xx/image/generic.mk
>> @@ -464,6 +464,16 @@ define Device/onion-omega
>> endef
>> TARGET_DEVICES += onion-omega
>>
>> +define Device/sc300m
>> + DEVICE_TITLE := Abicom SC300M
>> + DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
>kmod-usb-ledtrig-usbport
>> + BOARDNAME = SC300M
>> + IMAGE_SIZE = 15744k
>> + CONSOLE = ttyS0,115200
>> + MTDPARTS =
>spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
>> +endef
>> +TARGET_DEVICES += sc300m
>> +
>> define Device/smart-300
>> $(Device/tplink-8mlzma)
>> DEVICE_TITLE := NC-LINK SMART-300
>>
>
>_______________________________________________
>Lede-dev mailing list
>Lede-dev at lists.infradead.org
>http://lists.infradead.org/mailman/listinfo/lede-dev
More information about the Lede-dev
mailing list