[LEDE-DEV] [PATCH] ar71xx: prepare jffs2 partition properly in factory.bin for BHR-4GRV2

Naoki FUKAUMI naobsd at gmail.com
Sat Jan 28 08:08:47 PST 2017


can someone handle this for 17.01?

On Fri, Dec 9, 2016 at 5:53 PM, FUKAUMI Naoki <naobsd at gmail.com> wrote:
> "pad-rootfs" is required just after "append-rootfs".
>
> Signed-off-by: FUKAUMI Naoki <naobsd at gmail.com>
> ---
>  target/linux/ar71xx/image/generic.mk | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
> index 6ceabeb..b1d9af9 100644
> --- a/target/linux/ar71xx/image/generic.mk
> +++ b/target/linux/ar71xx/image/generic.mk
> @@ -704,6 +704,6 @@ define Device/bhr-4grv2
>    MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k at 0x50000(firmware)
>    IMAGES := sysupgrade.bin factory.bin
>    IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
> -  IMAGE/factory.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | mkbuffaloimg
> +  IMAGE/factory.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | mkbuffaloimg
>  endef
>  TARGET_DEVICES += bhr-4grv2
> --
> 2.7.4
>



More information about the Lede-dev mailing list