[LEDE-DEV] [PATCH 0/3] Add GPIO/LED Support for the PC Engines APU2/APU3

[Chris Blake]

The following series of patches are to help add support for the PC Engines APU2/APU3 board within LEDE. Specifically, these patches enable support for the Super IO GPIO controller (nct5104d), as well as the front LEDs and reset button.

Chris Blake (3):
  x86/64: Enable GPIO sysfs & GPIO LED support
  gpio-nct5104d: Add nct5104d driver package
  leds-apu2: Add PC Engines APU2 LED driver

 package/kernel/gpio-nct5104d/Makefile            |  52 +++
 package/kernel/gpio-nct5104d/src/Kconfig         |   5 +
 package/kernel/gpio-nct5104d/src/Makefile        |   1 +
 package/kernel/gpio-nct5104d/src/gpio-nct5104d.c | 461 +++++++++++++++++++++++
 package/kernel/leds-apu2/Makefile                |  52 +++
 package/kernel/leds-apu2/src/Kconfig             |   8 +
 package/kernel/leds-apu2/src/Makefile            |   1 +
 package/kernel/leds-apu2/src/leds-apu2.c         | 374 ++++++++++++++++++
 target/linux/x86/64/config-default               |   9 +
 9 files changed, 963 insertions(+)
 create mode 100644 package/kernel/gpio-nct5104d/Makefile
 create mode 100644 package/kernel/gpio-nct5104d/src/Kconfig
 create mode 100644 package/kernel/gpio-nct5104d/src/Makefile
 create mode 100644 package/kernel/gpio-nct5104d/src/gpio-nct5104d.c
 create mode 100644 package/kernel/leds-apu2/Makefile
 create mode 100644 package/kernel/leds-apu2/src/Kconfig
 create mode 100644 package/kernel/leds-apu2/src/Makefile
 create mode 100644 package/kernel/leds-apu2/src/leds-apu2.c

--
2.7.4