[LEDE-DEV] [PATCH] ath10k-ct: Support ath10k CT firmware for 9887 chipsets.

[Ben Greear]

My firmware does not appear to work well at all on 9887, so might as well skip this
commit for now.

Maybe I will find time to work on this in the future....

Thanks,
Ben

On 01/20/2017 03:20 PM, greearb at candelatech.com wrote:
> From: Ben Greear <greearb at candelatech.com>
>
> Signed-off-by: Ben Greear <greearb at candelatech.com>
> ---
>
> Build tested, but the board I was trying to test it on appears busted
> and does not even show an ath10k device on the bus, so not sure if
> this firmware actually works.
>
>  package/firmware/ath10k-firmware/Makefile | 38 +++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
>
> diff --git a/package/firmware/ath10k-firmware/Makefile b/package/firmware/ath10k-firmware/Makefile
> index fa026e4..301dcbd 100644
> --- a/package/firmware/ath10k-firmware/Makefile
> +++ b/package/firmware/ath10k-firmware/Makefile
> @@ -32,6 +32,11 @@ $(Package/ath10k-firmware-default)
>    TITLE:=ath10k firmware for QCA9887 devices
>  endef
>
> +define Package/ath10k-firmware-qca9887-ct
> +$(Package/ath10k-firmware-default)
> +  TITLE:=ath10k-CT firmware for QCA9887 devices
> +endef
> +
>  QCA9887_REV:=3cce88e245f2d685e49411c4f80998f94baf67b8
>  QCA9887_FIRMWARE_FILE:=firmware-5.bin_10.2.4-1.0-00013
>  QCA9887_FIRMWARE_FILE_HASH:=5966408bd41f309edb595344b8dd088c0fed212debfd91e5f3e8a55ea119c16d
> @@ -79,6 +84,13 @@ define Download/ath10k-firmware-qca988x-ct
>  endef
>  $(eval $(call Download,ath10k-firmware-qca988x-ct))
>
> +QCA9887_FIRMWARE_FILE_CT:=firmware-2-ct-full-community.bin-19-rc1-lede
> +define Download/ath10k-firmware-qca9887-ct
> +  $(call Download/ct-firmware,QCA9887,ath10k-9887)
> +  HASH:=622deb6996dd70b83d9a42c742254137fbc4afcc59134f60bf8f3e97aac17c6e
> +endef
> +$(eval $(call Download,ath10k-firmware-qca9887-ct))
> +
>  QCA99X0_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-9.bin-lede.001
>  define Download/ath10k-firmware-qca99x0-ct
>    $(call Download/ct-firmware,QCA99X0,ath10k-10-4)
> @@ -107,6 +119,13 @@ $(Package/ath10k-firmware-default)
>    CATEGORY:=Firmware
>  endef
>
> +define Package/ath10k-firmware-qca9887-ct
> +$(Package/ath10k-firmware-default)
> +  TITLE:=ath10k CT 10.1 firmware for QCA9887 devices
> +  SECTION:=firmware
> +  CATEGORY:=Firmware
> +endef
> +
>  define Package/ath10k-firmware-qca988x-ct/description
>  Alternative ath10k firmware for QCA988X from Candela Technologies.
>  Enables IBSS and other features.  See:
> @@ -116,6 +135,14 @@ is un-selected since the driver will try to load firmware-5.bin before
>  firmware-2.bin
>  endef
>
> +define Package/ath10k-firmware-qca9887-ct/description
> +Alternative ath10k firmware for QCA9887 from Candela Technologies.
> +Enables IBSS and other features.  See:
> +http://www.candelatech.com/ath10k-10.1.php
> +This firmware conflicts with the standard 9887 firmware, so select only
> +one.
> +endef
> +
>  define Package/ath10k-firmware-qca99x0-ct/description
>  Alternative ath10k firmware for QCA99x0 from Candela Technologies.
>  Enables IBSS and other features.  See:
> @@ -224,6 +251,16 @@ define Package/ath10k-firmware-qca988x/install
>  		$(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin
>  endef
>
> +define Package/ath10k-firmware-qca9887-ct/install
> +	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0
> +	$(INSTALL_DATA) \
> +		$(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9887) \
> +		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/firmware-2.bin
> +	$(INSTALL_DATA) \
> +		$(DL_DIR)/$(QCA9887_BOARD_FILE_DL) \
> +		$(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin
> +endef
> +
>  define Package/ath10k-firmware-qca988x-ct/install
>  	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0
>  	$(INSTALL_DATA) \
> @@ -297,6 +334,7 @@ $(eval $(call BuildPackage,ath10k-firmware-qca99x0))
>  $(eval $(call BuildPackage,ath10k-firmware-qca6174))
>  $(eval $(call BuildPackage,ath10k-firmware-qca9984))
>
> +$(eval $(call BuildPackage,ath10k-firmware-qca9887-ct))
>  $(eval $(call BuildPackage,ath10k-firmware-qca988x-ct))
>  $(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct))
>  $(eval $(call BuildPackage,ath10k-firmware-qca9984-ct))
>


-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com