February 2010 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Feb 1 02:36:51 EST 2010
Ending: Sun Feb 28 23:36:33 EST 2010
Messages: 1622

• [PATCH] rtc: driver for the DryIce block found in i.MX25 chips   Baruch Siach
• [PATCH] rtc: driver for the DryIce block found in i.MX25 chips   Lothar Waßmann
• [PATCH]NUC900 clk enable problem fix   Qiang Wang
• [PATCH] rtc: driver for the DryIce block found in i.MX25 chips   Baruch Siach
• defining ZRELADDR as PHYS_OFFSET + TEXT_OFFSET   Uwe Kleine-König
• [PATCH] rtc: driver for the DryIce block found in i.MX25 chips   Alessandro Zummo
• [PATCH 2/2] ftrace: re-enable dynamic ftrace for ARM   Uwe Kleine-König
• About kernel decompressors (fwd)   Pavel Machek
• [PATCH] imx-serial-excessive-status-clearing-on-break.patch   Andy Green
• [Linux-arm-nuc900] Re: [PATCH]NUC900 LCD Controller Driver   Qiang Wang
• [Linux-arm-nuc900] RE: [PATCH]NUC900 LCD Controller Driver   Qiang Wang
• [PATCH] Modify PL031 for Nomadik and U8500   Linus Walleij
• [rtc-linux] [PATCH] Modify PL031 for Nomadik and U8500   Alessandro Zummo
• [PATCH 01/06] ARM: SuperH Mobile ARM, sh7367 and G3EVM support   Pavel Machek
• [PATCH 01/06] ARM: SuperH Mobile ARM, sh7367 and G3EVM support   Paul Mundt
• About kernel decompressors (fwd)   Eric Miao
• Pull request   Sascha Hauer
• my imx changes for 2.6.34   Uwe Kleine-König
• [PATCH 1/8] mx1: prefix SOC specific defines with MX1_ and deprecate old names   Uwe Kleine-König
• [PATCH 2/8] mx25: deprecate UART1_BASE_ADDR and UART2_BASE_ADDR   Uwe Kleine-König
• [PATCH 3/8] imx: BUG in clk_disable if the clock isn't enabled   Uwe Kleine-König
• [PATCH 4/8] mxc91231: use MXC91231_IO_ADDRESS instead of MXC91231_AIPS1_IO_ADDRESS   Uwe Kleine-König
• [PATCH 5/8] mxc91231: redefine MXC91231_IO_ADDRESS using IMX_IO_ADDRESS   Uwe Kleine-König
• [PATCH 6/8] imx2x: convert serial.c to use soc-prefixed constants   Uwe Kleine-König
• [PATCH 7/8] imx: define per SOC ..._PHYS_OFFSET and use these in favour of PHYS_OFFSET   Uwe Kleine-König
• [PATCH 8/8] imx/mx25: rename files defining a machine to mach-$mach.c   Uwe Kleine-König
• [PATCH 01/06] ARM: SuperH Mobile ARM, sh7367 and G3EVM support   Linus Walleij
• [PATCH 2/2] ftrace: re-enable dynamic ftrace for ARM   Rabin Vincent
• [PATCH 4/4] mmp2: append board irq events   Eric Miao
• [PATCH] [ARM] pxa: match camera clock by struct device   Eric Miao
• [PATCH] Modify PL031 for Nomadik and U8500   Russell King - ARM Linux
• [PATCH 0/9] Initial multi-omap support for omap4   Tony Lindgren
• [PATCH 6/9] omap3/4: Fix compile for multi-omap for clkops_noncore_dpll_ops   Paul Walmsley
• [PATCH] omap: Disable serial port autoidle by default   Tony Lindgren
• [PATCH - v5] support for Embedian MXM-8x10   Eric Miao
• [PATCH 2/2] ftrace: re-enable dynamic ftrace for ARM   Uwe Kleine-König
• Uncompressing broken with commit e7db7b4270   Albin Tonnerre
• [PATCH 01/06] ARM: SuperH Mobile ARM, sh7367 and G3EVM support   Paul Mundt
• [PATCH] amba-pl011: support hardware flow control   Rabin Vincent
• [Linux-arm-nuc900] RE: [PATCH]NUC900 LCD Controller Driver   Qiang Wang
• [PATCH]NUC900 add gpio virtual memory map   Qiang Wang
• [PATCH - v5] support for Embedian MXM-8x10   Edwin Peer
• [PATCH - v5] support for Embedian MXM-8x10   Edwin Peer
• [PATCH v3] rtc: driver for the DryIce block found in i.MX25 chips   Baruch Siach
• [PATCH 1/3] OMAP4: Add L2 Cache support   Shilimkar, Santosh
• [PATCH 3/8] imx: BUG in clk_disable if the clock isn't enabled   Baruch Siach
• [PATCH 3/8] imx: BUG in clk_disable if the clock isn't enabled   Uwe Kleine-König
• [rtc-linux] [PATCH v3] rtc: driver for the DryIce block found in i.MX25 chips   Alessandro Zummo
• [rtc-linux] [PATCH v3] rtc: driver for the DryIce block found in i.MX25 chips   Baruch Siach
• [PATCH v3] rtc: driver for the DryIce block found in i.MX25 chips   Baruch Siach
• not able to understand 'icedcc_putc'   Uwe Kleine-König
• not able to understand 'icedcc_putc'   Chetan Nanda
• Uncompressing broken with commit e7db7b4270   Uwe Kleine-König
• Uncompressing broken with commit e7db7b4270   Uwe Kleine-König
• Uncompressing broken with commit e7db7b4270   Colin Tuckley
• Uncompressing broken with commit e7db7b4270   Uwe Kleine-König
• Uncompressing broken with commit e7db7b4270   Catalin Marinas
• [PATCH v3 2/7] ARM: S5P6442: Add clock support for S5P6442   Kukjin Kim
• [PATCH v3 2/7] ARM: S5P6442: Add clock support for S5P6442   Ben Dooks
• [PATCH - v6] support for Embedian MXM-8x10   Edwin Peer
• [PATCH] ARM: S3C: Fix a compilation error in MCI   Michel Pollet
• [PATCH v3 2/7 RE-SEND] ARM: S5P6442: Add clock support for S5P6442   Kukjin Kim
• [PATCH 21/25] imx: only define deprecated symbols conditionally   Jiri Kosina
• [PATCH 21/25] imx: only define deprecated symbols conditionally   Jiri Kosina
• [PATCH 1/4] mfd: update i2c driver for max8925   Haojian Zhuang
• [PATCH 3/4] rtc: enable rtc in max8925   Haojian Zhuang
• [PATCH 21/25] imx: only define deprecated symbols conditionally   Uwe Kleine-König
• [PATCH 1/4] mfd: update i2c driver for max8925   Samuel Ortiz
• [PATCH v3 2/7 RE-SEND] ARM: S5P6442: Add clock support for S5P6442   roel kluin
• [PATCH v3 2/7 RE-SEND] ARM: S5P6442: Add clock support for S5P6442   roel kluin
• [RFC PATCH 0/4] ARM: add support for hw-breakpoints   Will Deacon
• [RFC PATCH 1/4] ARM: hw-breakpoint: add mechanism for hooking into prefetch aborts   Will Deacon
• [RFC PATCH 2/4] ARM: hw-breakpoint: add ARM backend for the hw-breakpoint framework   Will Deacon
• [RFC PATCH 3/4] ARM: hw-breakpoint: add new ptrace requests for hw-breakpoint interaction   Will Deacon
• [RFC PATCH 4/4] ARM: hw-breakpoint: add HAVE_HW_BREAKPOINT to Kconfig   Will Deacon
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Russell King - ARM Linux
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jamie Iles
• [PATCH 4/5] arm: enable support for software perf events   Russell King - ARM Linux
• [PATCH 4/5] arm: enable support for software perf events   Will Deacon
• [PATCH 4/5] arm: enable support for software perf events   Jamie Iles
• [PATCH 4/5] arm: enable support for software perf events   Russell King - ARM Linux
• [PATCH] ARM: Fix warnings in corgi/spitz_defconfig   Matthias Kaehlcke
• [PATCH 4/5] arm: enable support for software perf events   Jamie Iles
• 32-bit Thumb-2 breakpoints   Russell King - ARM Linux
• [PATCH] vic: make irq_chip access typesafe   H Hartley Sweeten
• LPC32XX arch updates from developer comments   wellsk40 at gmail.com
• [PATCH 01/16] ARM: LPC32XX: clock lookups array should not be tagged __initdata   wellsk40 at gmail.com
• [PATCH 02/16] ARM: LPC32XX: removed extra include statement   wellsk40 at gmail.com
• [PATCH 03/16] ARM: LPC32XX: Added LPC32XX identifier to high level macro names   wellsk40 at gmail.com
• [PATCH 04/16] ARM: LPC32XX: Added LXP32XX identified to CLKPWR register field macros   wellsk40 at gmail.com
• [PATCH 05/16] ARM: LPC32XX: Added LPC32XX identifier to INTC register field macros   wellsk40 at gmail.com
• [PATCH 06/16] ARM: LPC32XX: Added LPC32XX identifier to TIMER register field macros   wellsk40 at gmail.com
• [PATCH 07/16] ARM: LPC32XX: Added LPC32XX identifier to UART register field macros   wellsk40 at gmail.com
• [PATCH 08/16] ARM: LPC32XX: Added LPC32XX identifier to GPIO register field macros   wellsk40 at gmail.com
• [PATCH 09/16] ARM: LPC32XX: LPC32XX macro name changes and local macro use   wellsk40 at gmail.com
• [PATCH 10/16] ARM: LPC32XX: Converted most register types to void __iomem *   wellsk40 at gmail.com
• [PATCH 11/16] ARM: LPC32XX: Converted interrupt registers to void __iomem *   wellsk40 at gmail.com
• [PATCH 12/16] ARM: LPC32XX: Watchdog reset type and sparse fixes   wellsk40 at gmail.com
• [PATCH 13/16] ARM: LPC32XX: Various fixes with readl/writel types   wellsk40 at gmail.com
• [PATCH 14/16] ARM: LPC32XX: Several small sparse warning fixed   wellsk40 at gmail.com
• [PATCH 15/16] ARM: LPC32XX: Updated device IRQ names with LPC32XX identifier   wellsk40 at gmail.com
• [PATCH 16/16] ARM: LPC32XX: Fix sparse errors on LCD code   wellsk40 at gmail.com
• [PATCH 1/1] mmp2: add handling on PMIC IRQ   Eric Miao
• 32-bit Thumb-2 breakpoints   Daniel Jacobowitz
• [PATCH 1/4] mfd: update i2c driver for max8925   Haojian Zhuang
• [PULL] Please pull bjdooks' for-rmk/samsung4   Ben Dooks
• [PATCH 0/9] omap fixes for 2.6.33-rc6   Tony Lindgren
• [PATCH 1/9] omap: define _toggle_gpio_edge_triggering only for OMAP1   Tony Lindgren
• [PATCH 2/9] omap: Remove old unused defines for OMAP_32KSYNCT_BASE   Tony Lindgren
• [PATCH 3/9] ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAP   Tony Lindgren
• [PATCH 4/9] OMAP2/3: IRQ: ensure valid base address   Tony Lindgren
• [PATCH 5/9] OMAP2/3: GPMC: ensure valid clock pointer   Tony Lindgren
• [PATCH 6/9] omap: Fix 3630 mux errors   Tony Lindgren
• [PATCH 7/9] omap: Fix arch/arm/mach-omap2/mux.c: Off by one error   Tony Lindgren
• [PATCH 8/9] omap: Fix access to already released memory in clk_debugfs_register_one()   Tony Lindgren
• [PATCH 9/9] omap: Disable serial port autoidle by default   Tony Lindgren
• [PATCH 9/9] omap: Disable serial port autoidle by default   Tony Lindgren
• [PATCHv2 00/11] Base support for Freescale i.MX51 SoC platform   Amit Kucheria
• [PATCHv2 01/11] arm: mxc: TrustZone interrupt controller (TZIC) for i.MX5 family   Amit Kucheria
• [PATCHv2 02/11] mxc timer: refactor timer code to use timer versions   Amit Kucheria
• [PATCHv2 03/11] mxc: Fix Drive Strength Field in the IOMUX controller   Amit Kucheria
• [PATCHv2 04/11] mxc: changes to common plat-mxc code to add support for i.MX5   Amit Kucheria
• [PATCHv2 05/11] mxc: Core support for i.MX5 series of processors from Freescale   Amit Kucheria
• [PATCHv2 06/11] mxc: enable support for Freescale i.MX5 series of processors   Amit Kucheria
• [PATCHv2 07/11] mxc: Add support for the Babbage board   Amit Kucheria
• [PATCHv2 08/11] fec: fix uninitialized rx buffer usage   Amit Kucheria
• [PATCHv2 09/11] fec: Add LAN8700 phy support   Amit Kucheria
• [PATCHv2 10/11] fec: Add ARCH_MX5 as a dependency   Amit Kucheria
• [PATCHv2 11/11] mxc: Add imx51_defconfig   Amit Kucheria
• [PATCHv2 01/11] arm: mxc: TrustZone interrupt controller (TZIC) for i.MX5 family   Eric Miao
• [PATCHv2 03/11] mxc: Fix Drive Strength Field in the IOMUX controller   Eric Miao
• [PATCH 1/1] mmp2: add handling on PMIC IRQ   Haojian Zhuang
• [PATCHv2 04/11] mxc: changes to common plat-mxc code to add support for i.MX5   Eric Miao
• [PATCHv2 05/11] mxc: Core support for i.MX5 series of processors from Freescale   Eric Miao
• [PATCH 1/1] mmp2: add handling on PMIC IRQ   Haojian Zhuang
• [PATCH 1/1] mmp2: add handling on PMIC IRQ   Eric Miao
• [PATCH 1/9] omap: define _toggle_gpio_edge_triggering only for OMAP1   Uwe Kleine-König
• [PATCH/RFC v2.1 0/2] Mem-to-mem device framework   Mauro Carvalho Chehab
• [PATCHv2 05/11] mxc: Core support for i.MX5 series of processors from Freescale   Russell King - ARM Linux
• [PATCHv2 03/11] mxc: Fix Drive Strength Field in the IOMUX controller   Sascha Hauer
• Uncompressing broken with commit e7db7b4270   Uwe Kleine-König
• [PATCHv2 01/11] arm: mxc: TrustZone interrupt controller (TZIC) for i.MX5 family   Sascha Hauer
• [PATCHv2 04/11] mxc: changes to common plat-mxc code to add support for i.MX5   Sascha Hauer
• [PATCH 01/16] ARM: LPC32XX: clock lookups array should not be tagged __initdata   Russell King - ARM Linux
• [PATCH 02/16] ARM: LPC32XX: removed extra include statement   Russell King - ARM Linux
• [PATCH 10/16] ARM: LPC32XX: Converted most register types to void __iomem *   Russell King - ARM Linux
• [PATCH 10/16] ARM: LPC32XX: Converted most register types to void __iomem *   Russell King - ARM Linux
• [PATCH 13/16] ARM: LPC32XX: Various fixes with readl/writel types   Russell King - ARM Linux
• [PATCH 04/13] ARM: LPC32XX arch support in Kconfig and Makefile   Uwe Kleine-König
• [PATCH 05/13] ARM: LPC32XX: arch Kconfig, plat Kconfig, and makefiles   Uwe Kleine-König
• [PATCH 06/13] ARM: LPC32XX: Core architecture files   Uwe Kleine-König
• [PATCHv2 05/11] mxc: Core support for i.MX5 series of processors from Freescale   Sascha Hauer
• [PATCHv2 07/11] mxc: Add support for the Babbage board   Sascha Hauer
• [PATCH 05/13] ARM: LPC32XX: arch Kconfig, plat Kconfig, and makefiles   Russell King - ARM Linux
• 32-bit Thumb-2 breakpoints   Catalin Marinas
• [PATCH 1/5] mfd: clean code in max8925   Haojian Zhuang
• [PATCH 2/5] mfd: use i2c_dummy in 88pm860x   Haojian Zhuang
• [PATCH 3/5] mfd: use genirq in 88pm860x   Haojian Zhuang
• [PATCH 4/5] input: update 88pm860x driver   Haojian Zhuang
• [PATCH 5/5] input: support onkey in 88pm860x   Haojian Zhuang
• [PATCHv2 01/11] arm: mxc: TrustZone interrupt controller (TZIC) for i.MX5 family   Amit Kucheria
• 32-bit Thumb-2 breakpoints   Russell King - ARM Linux
• [PATCHv2 04/11] mxc: changes to common plat-mxc code to add support for i.MX5   Amit Kucheria
• 32-bit Thumb-2 breakpoints   Daniel Jacobowitz
• [PATCH 05/13] ARM: LPC32XX: arch Kconfig, plat Kconfig, and makefiles   Uwe Kleine-König
• 32-bit Thumb-2 breakpoints   Jamie Iles
• [PATCHv2 05/11] mxc: Core support for i.MX5 series of processors from Freescale   Amit Kucheria
• [patch v3 0/3] at91_udc: fix soft lockup, HW glitch and use spinlocks   Harro Haan
• [patch v3 1/3] Fix soft lockup in at91 udc driver   Harro Haan
• [patch v3 2/3] at91_udc HW glitch   Harro Haan
• [patch v3 3/3] at91_udc.c use spinlocks instead of local_irq_xxx   Harro Haan
• [PATCH 9/9] omap: Disable serial port autoidle by default   Kevin Hilman
• 32-bit Thumb-2 breakpoints   Russell King - ARM Linux
• 32-bit Thumb-2 breakpoints   Russell King - ARM Linux
• 32-bit Thumb-2 breakpoints   Daniel Jacobowitz
• [RFC 05/18] arm: msm: implement ioremap_strongly_ordered   Russell King - ARM Linux
• [PATCH 05/13] ARM: LPC32XX: arch Kconfig, plat Kconfig, and makefiles   Russell King - ARM Linux
• 32-bit Thumb-2 breakpoints   Matthieu CASTET
• 32-bit Thumb-2 breakpoints   Catalin Marinas
• [PATCHv2 01/11] arm: mxc: TrustZone interrupt controller (TZIC) for i.MX5 family   Eric Miao
• [PATCHv2 04/11] mxc: changes to common plat-mxc code to add support for i.MX5   Eric Miao
• 32-bit Thumb-2 breakpoints   Daniel Jacobowitz
• 32-bit Thumb-2 breakpoints   Nicolas Pitre
• 32-bit Thumb-2 breakpoints   Russell King - ARM Linux
• 32-bit Thumb-2 breakpoints   Jamie Iles
• 32-bit Thumb-2 breakpoints   Daniel Jacobowitz
• 32-bit Thumb-2 breakpoints   Nicolas Pitre
• [PATCH 06/13] ARM: LPC32XX: Core architecture files   Uwe Kleine-König
• [PATCH 07/13] ARM: LPC32XX: common architecture functions and structures   Uwe Kleine-König
• 32-bit Thumb-2 breakpoints   Will Deacon
• [PATCHv2 05/11] mxc: Core support for i.MX5 series of processors from Freescale   Rabin Vincent
• [RFC PATCH] ARM: Change the mandatory barriers implementation   Catalin Marinas
• [PATCHv2 02/11] mxc timer: refactor timer code to use timer versions   Grant Likely
• [PATCHv2 03/11] mxc: Fix Drive Strength Field in the IOMUX controller   Grant Likely
• [PATCH 08/13] ARM: LPC32XX: clock tree support   Uwe Kleine-König
• [PATCHv2 04/11] mxc: changes to common plat-mxc code to add support for i.MX5   Grant Likely
• 32-bit Thumb-2 breakpoints   Russell King - ARM Linux
• [PATCH 09/13] ARM: LPC32XX: power and event management   Uwe Kleine-König
• [PATCHv2 08/11] fec: fix uninitialized rx buffer usage   Grant Likely
• [PATCH 10/13] ARM: LPC32XX: Phytec PHY3250 platform support file   Uwe Kleine-König
• [PATCH 11/13] ARM: LPC32XX: printascii() output and irq support functions   Uwe Kleine-König
• [PATCH 1/9] omap: define _toggle_gpio_edge_triggering only for OMAP1   Tony Lindgren
• [PATCH 12/13] ARM: LPC32XX: architecture header files   Uwe Kleine-König
• [PATCH 1/9] omap: define _toggle_gpio_edge_triggering only for OMAP1   Uwe Kleine-König
• 32-bit Thumb-2 breakpoints   Jamie Lokier
• [PATCH 1/9] omap: define _toggle_gpio_edge_triggering only for OMAP1   Tony Lindgren
• [PATCH 5/5] input: support onkey in 88pm860x   Dmitry Torokhov
• 32-bit Thumb-2 breakpoints   Daniel Jacobowitz
• 32-bit Thumb-2 breakpoints   Daniel Jacobowitz
• [spi-devel-general] PATCH [1/1] SPI: AMBA_PL022: Limit TX FIFO fills based on current RX FIFO used   Grant Likely
• [PATCH v3 2/7 RE-SEND] ARM: S5P6442: Add clock support for S5P6442   Ben Dooks
• [PATCH v3 2/7 RE-SEND] ARM: S5P6442: Add clock support for S5P6442   Ben Dooks
• [PATCH 05/13] ARM: LPC32XX: arch Kconfig, plat Kconfig, and makefiles   Kevin Wells
• [PATCH 06/13] ARM: LPC32XX: Core architecture files   Kevin Wells
• [PATCHv2 08/11] fec: fix uninitialized rx buffer usage   Amit Kucheria
• [PATCHv2 08/11] fec: fix uninitialized rx buffer usage   Grant Likely
• [git patches] new hardware support for atang tree   Bartlomiej Zolnierkiewicz
• [PATCH 06/13] ARM: LPC32XX: Core architecture files   Kevin Wells
• [PATCH 08/13] ARM: LPC32XX: clock tree support   Kevin Wells
• [PATCH 05/13] ARM: LPC32XX: arch Kconfig, plat Kconfig, and makefiles   Uwe Kleine-König
• [PATCH 11/13] ARM: LPC32XX: printascii() output and irq support functions   Kevin Wells
• [PATCH 09/13] ARM: LPC32XX: power and event management   Kevin Wells
• [PATCH] MX1/MX2: -EINVAL overwritten in second iteration in mxc_gpio_setup_multiple_pins()   Roel Kluin
• [PATCH 12/13] ARM: LPC32XX: architecture header files   Kevin Wells
• [PATCH 01/16] ARM: LPC32XX: clock lookups array should not be tagged __initdata   Kevin Wells
• [git patches] new hardware support for atang tree   Jeff Garzik
• [PATCHv2 05/11] mxc: Core support for i.MX5 series of processors from Freescale   Amit Kucheria
• [PATCH 08/13] ARM: LPC32XX: clock tree support   Uwe Kleine-König
• [PATCHv2 08/11] fec: fix uninitialized rx buffer usage   Grant Likely
• [PATCH] mfd: clean code in max8925   Haojian Zhuang
• [PATCH] mfd: use i2c_dummy in 88pm860x   Haojian Zhuang
• [PATCH] mfd: use genirq in 88pm860x   Haojian Zhuang
• [PATCH] input: update 88pm860x driver   Haojian Zhuang
• [PATCH 06/13] ARM: LPC32XX: Core architecture files   Uwe Kleine-König
• [PATCH] input: support onkey in 88pm860x   Haojian Zhuang
• [PATCH 12/13] ARM: LPC32XX: architecture header files   Uwe Kleine-König
• [PATCH 11/13] ARM: LPC32XX: printascii() output and irq support functions   Uwe Kleine-König
• [PATCH] MX1/MX2: -EINVAL overwritten in second iteration in mxc_gpio_setup_multiple_pins()   Uwe Kleine-König
• [PATCH 12/13] ARM: LPC32XX: architecture header files   Russell King - ARM Linux
• [PATCH 06/13] ARM: LPC32XX: Core architecture files   Kevin Wells
• [PATCH 12/13] ARM: LPC32XX: architecture header files   Kevin Wells
• [spi-devel-general] PATCH [1/1] SPI: AMBA_PL022: Limit TX FIFO fills based on current RX FIFO used   Linus Walleij
• [RFC 18/18] arm: mm: qsd8x50: Fix incorrect permission faults   David Brown
• [PATCH v3 2/7 RE-SEND-2] ARM: S5P6442: Add clock support for S5P6442   Kukjin Kim
• [RFC PATCH] ARM: Change the mandatory barriers implementation   Abhijeet Dharmapurikar
• [PATCHv2 03/11] mxc: Fix Drive Strength Field in the IOMUX controller   Amit Kucheria
• [PATCH v3 2/7 RE-SEND-3] ARM: S5P6442: Add clock support for S5P6442   Kukjin Kim
• Ignore [PATCH v3 2/7 RE-SEND-2] ARM: S5P6442: Add clock support for S5P6442   Kukjin Kim
• [PATCHv2 01/11] arm: mxc: TrustZone interrupt controller (TZIC) for i.MX5 family   Eric Miao
• [PATCH v3 2/7 RE-SEND] ARM: S5P6442: Add clock support for S5P6442   Kukjin Kim
• [PATCH 08/25] imx/mx1: rename files defining a machine to mach-$mach.c   Amit Kucheria
• copy_to_user limits inquiry   E Robertson
• [RFC PATCH] ARM: Change the mandatory barriers implementation   Shilimkar, Santosh
• [PATCH 1/1] fix i2c_msg.len not aligning with i2c_master_send   zhangfei gao
• [PATCH 1/1] fix i2c_msg.len not aligning with i2c_master_send   Ben Dooks
• [git patches] new hardware support for atang tree   Ben Dooks
• [PATCH 06/13] ARM: LPC32XX: Core architecture files   Uwe Kleine-König
• [PATCH 1/1] fix i2c_msg.len not aligning with i2c_master_send   zhangfei gao
• [PATCH 08/25] imx/mx1: rename files defining a machine to mach-$mach.c   Uwe Kleine-König
• [PATCH 1/2] Modify PL031 for Nomadik and U8500 v2   Linus Walleij
• [PATCH 2/2] Add RTC PL031 derivative platform config for ux500   Linus Walleij
• atmel-mci / at91_mci   Manuel Stahl
• [PATCH] vic: make irq_chip access typesafe   Linus Walleij
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Dennis Semakin
• [PATCH 1/1] fix i2c_msg.len not aligning with i2c_master_send   Jean Delvare
• [PATCH] RFC: mx27: Add soc_camera support   Baruch Siach
• [PATCH 1/2] Modify PL031 for Nomadik and U8500 v2   Alessandro Zummo
• change boot requirements [Was: make PHYS_OFFSET determined at run time (unfinished)]   Uwe Kleine-König
• [PATCH] arm: remove bit-rotten STANDALONE_DEBUG for decompressor   Uwe Kleine-König
• [PATCH 01/16] ARM: LPC32XX: clock lookups array should not be tagged __initdata   Uwe Kleine-König
• [PATCH 11/16] ARM: LPC32XX: Converted interrupt registers to void __iomem *   Uwe Kleine-König
• [PATCH 1/2] Modify PL031 for Nomadik and U8500 v2   Linus Walleij
• [PATCH 5/5] input: support onkey in 88pm860x   Haojian Zhuang
• [PATCH 08/25] imx/mx1: rename files defining a machine to mach-$mach.c   Mark Brown
• [PATCH 08/25] imx/mx1: rename files defining a machine to mach-$mach.c   Eric Miao
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Eric Miao
• [PATCH 1/1] fix i2c_msg.len not aligning with i2c_master_send   zhangfei gao
• [PATCH 1/1] fix i2c_msg.len not aligning with i2c_master_send   Eric Miao
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Dennis Semakin
• [PATCH 1/1] fix i2c_msg.len not aligning with i2c_master_send   Jean Delvare
• [RFC PATCH] ARM: Change the mandatory barriers implementation   Catalin Marinas
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Dennis Semakin
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Dennis Semakin
• [PATCH 0/5] cache-l2x0 and omap4 l2 support   Shilimkar, Santosh
• [PATCH 1/5] ARM: L2 : Add maintainace by line helper functions   Santosh Shilimkar
• [PATCH 2/5] OMAP4: Add L2 Cache support   Santosh Shilimkar
• [PATCH 3/5] OMAP4: Clean the secondary_data from L2   Santosh Shilimkar
• [PATCH 4/5] ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines   Santosh Shilimkar
• [PATCH 5/5] OMAP4: Enable L2 Cache   Santosh Shilimkar
• [PATCH 2/5] OMAP4: Add L2 Cache support   Russell King - ARM Linux
• [PATCH 4/5] ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines   Russell King - ARM Linux
• [PATCH 0/5] cache-l2x0 and omap4 l2 support   Russell King - ARM Linux
• [PATCH] Add USB support for i.MX27/35 and Phytec i.MX boards   Sascha Hauer
• [PATCH 1/8] fsl_mx3_udc: Add i.MX35 support   Sascha Hauer
• [PATCH 2/8] i.MX ehci platform support: Some fixes   Sascha Hauer
• [PATCH 3/8] i.MX27: Add USB control register access support   Sascha Hauer
• [PATCH 4/8] i.MX35: Add USB control register access support   Sascha Hauer
• [PATCH 5/8] i.MX27 pca100: Add USB support   Sascha Hauer
• [PATCH 6/8] i.MX27 pcm038: Add USB support   Sascha Hauer
• [PATCH 7/8] i.MX31 pcm037: Add USB support   Sascha Hauer
• [PATCH 8/8] i.MX27 pca100: Add USB support   Sascha Hauer
• [PATCH 4/5] ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines   Shilimkar, Santosh
• [PATCH 0/5] cache-l2x0 and omap4 l2 support   Shilimkar, Santosh
• [PATCH 4/8] i.MX35: Add USB control register access support   Enrico Scholz
• [PATCH 0/5] cache-l2x0 and omap4 l2 support   Tony Lindgren
• [PATCH 4/8] i.MX35: Add USB control register access support   Sascha Hauer
• [PATCH 4/8] i.MX35: Add USB control register access support   Sascha Hauer
• [RFC PATCH] ARM: Change the mandatory barriers implementation   Tony Lindgren
• CONFIG_SMP: Status of pending patches?   Dirk Behme
• CONFIG_SMP: Status of pending patches?   Russell King - ARM Linux
• [PATCH] vic: make irq_chip access typesafe   H Hartley Sweeten
• [PATCHv2 01/11] arm: mxc: TrustZone interrupt controller (TZIC) for i.MX5 family   Nguyen Dinh-R00091
• [PATCH] Add USB support for i.MX27/35 and Phytec i.MX boards   Baruch Siach
• [PATCH] ARM: Correct the FPSCR bits setting when raising exceptions   Eric Miao
• [RFC PATCH 1/3] [ARM] allow NR_IRQS to be larger than 256   Eric Miao
• [RFC PATCH 2/3] [ARM] Preliminary support for dynamic IRQ   Eric Miao
• [RFC PATCH 3/3] [ARM] Allow boards to specify the exact number of IRQs needed   Eric Miao
• [RFC PATCH 1/3] [ARM] allow NR_IRQS to be larger than 256   Russell King - ARM Linux
• [RFC PATCH 1/3] [ARM] allow NR_IRQS to be larger than 256   Eric Miao
• [RFC PATCH 1/3] [ARM] allow NR_IRQS to be larger than 256   Eric Miao
• [RFC PATCH 1/3] [ARM] allow NR_IRQS to be larger than 256   Russell King - ARM Linux
• [RFC PATCH 1/3] [ARM] allow NR_IRQS to be larger than 256   Gilles Chanteperdrix
• [RFC PATCH 1/3] [ARM] allow NR_IRQS to be larger than 256   Russell King - ARM Linux
• [PATCH] Add USB support for i.MX27/35 and Phytec i.MX boards   Sascha Hauer
• [RFC PATCH 1/3] [ARM] allow NR_IRQS to be larger than 256   Eric Miao
• [PATCH] ep93xx: Add support for Snapper CL15 module   Ryan Mallon
• [PATCH] i2c: i2c_msg.len modify to __u32 type   Zhangfei Gao
• [PATCH] ep93xx: Add support for Snapper CL15 module   H Hartley Sweeten
• [RFC PATCH v2 0/2] ARM: VFP: Save / restore VFP state on the signal handler path   Imre Deak
• [RFC PATCH v2 1/2] ARM: VFP: add support to sync the VFP state of the current thread   Imre Deak
• [RFC PATCH v2 2/2] ARM: VFP: preserve the HW context when calling signal handlers   Imre Deak
• [PATCH] ep93xx: Add support for Snapper CL15 module   Ryan Mallon
• [GIT PULL] omap fixes for 2.6.33-rc6   Tony Lindgren
• 32-bit Thumb-2 breakpoints   Pavel Machek
• [PATCH] input: mark {corgi,spitz,tosa}kbd driver deprecated   Eric Miao
• [PATCH 13/13] input: schedule corgi_ssp and corgi_ts to be removed   Eric Miao
• [PATCH] input: schedule corgi_ssp and corgi_ts to be removed   Eric Miao
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Daniel Mack
• [PATCH] ARM: Fix ARM11 MPCore OProfile breakage due to ARM patch 5901/2   George G. Davis
• [PATCH 1/1] fix i2c_msg.len not aligning with i2c_master_send   zhangfei gao
• [PATCH 2/5] arm/oprofile: reserve the PMU when starting   George G. Davis
• [PATCHv2 11/11] mxc: Add imx51_defconfig   Sascha Hauer
• [PATCH] input: schedule corgi_ssp and corgi_ts to be removed   Uwe Kleine-König
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Uwe Kleine-König
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Dennis Semakin
• [RFC PATCH 2/3] [ARM] Preliminary support for dynamic IRQ   Ben Dooks
• [RFC PATCH 3/3] [ARM] Allow boards to specify the exact number of IRQs needed   Ben Dooks
• defining ZRELADDR as PHYS_OFFSET + TEXT_OFFSET   George G. Davis
• [RFC PATCH 3/3] [ARM] Allow boards to specify the exact number of IRQs needed   Ben Dooks
• [PATCH 3/4] rtc: enable rtc in max8925   Samuel Ortiz
• [PATCH 1/4] mfd: update i2c driver for max8925   Samuel Ortiz
• defining ZRELADDR as PHYS_OFFSET + TEXT_OFFSET   Uwe Kleine-König
• [PATCH 2/5] arm/oprofile: reserve the PMU when starting   Jamie Iles
• [RFC PATCH 3/3] [ARM] Allow boards to specify the exact number of IRQs needed   Eric Miao
• [RFC PATCH 2/3] [ARM] Preliminary support for dynamic IRQ   Eric Miao
• [PATCH] input: schedule corgi_ssp and corgi_ts to be removed   Sergei Shtylyov
• [PATCH] ARM: Correct the FPSCR bits setting when raising exceptions   Catalin Marinas
• [PATCH] input: schedule corgi_ssp and corgi_ts to be removed   Eric Miao
• [RFC PATCH] ARM: Change the mandatory barriers implementation   Catalin Marinas
• [PATCH 1/1] fix i2c_msg.len not aligning with i2c_master_send   Eric Miao
• [PATCH 00/06] ARM: Initial SuperH Mobile ARM support V2   Magnus Damm
• [PATCH 01/06] ARM: SuperH Mobile ARM, sh7367 and G3EVM support V2   Magnus Damm
• [PATCH 02/06] ARM: Add sh7377 and G4EVM support V2   Magnus Damm
• [PATCH 03/06] ARM: Add sh7372 and AP4EVB support V2   Magnus Damm
• [PATCH 04/06] sh: Build drivers/sh for SuperH Mobile ARM   Magnus Damm
• [PATCH 05/06] sh: Let INTC set IRQF_VALID on ARM platforms V2   Magnus Damm
• [PATCH 06/06] sh-sci: SuperH Mobile ARM support V2   Magnus Damm
• defining ZRELADDR as PHYS_OFFSET + TEXT_OFFSET   George G. Davis
• [PATCH 3/5] mfd: use genirq in 88pm860x   Samuel Ortiz
• [PATCH 1/5] mfd: clean code in max8925   Samuel Ortiz
• [PATCH 2/5] mfd: use i2c_dummy in 88pm860x   Samuel Ortiz
• [PATCH 5/5] input: support onkey in 88pm860x   Samuel Ortiz
• [PATCHv3 0/7] Initial Freescale i.MX51 SoC support   Amit Kucheria
• [PATCHv3 1/7] mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 family   Amit Kucheria
• [PATCHv3 2/7] mxc: refactor timer code to use timer versions   Amit Kucheria
• [PATCHv3 3/7] mxc: changes to common plat-mxc code to add support for i.MX5   Amit Kucheria
• [PATCHv3 4/7] mxc: Core support for Freescale i.MX5 series   Amit Kucheria
• [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)   Amit Kucheria
• [PATCHv3 6/7] mxc: Add mx51_defconfig   Amit Kucheria
• [PATCHv3 7/7] mxc: MAINTAINERS: Add maintainer for mach-mx5   Amit Kucheria
• [PATCH] input: schedule corgi_ssp and corgi_ts to be removed   Richard Purdie
• [PATCH - v7] Support for Embedian MXM-8x10   Edwin Peer
• [PATCH 08/13] ARM: LPC32XX: clock tree support   Kevin Wells
• Compiler for Atmel AT91SAMG20   Andrew
• [PATCH 5/5] input: support onkey in 88pm860x   Dmitry Torokhov
• [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)   Magnus Lilja
• [PATCH 08/25] imx/mx1: rename files defining a machine to mach-$mach.c   Amit Kucheria
• Compiler for Atmel AT91SAMG20   Daniel Jacobowitz
• race between kmap shootdown and cache maintenance   Gary King
• [PATCH 08/13] ARM: LPC32XX: clock tree support   Russell King - ARM Linux
• [PATCH] i2c: notes of i2c_master_send & i2c_master_recv   Zhangfei Gao
• [PATCH 01/06] ARM: SuperH Mobile ARM, sh7367 and G3EVM support V2   Russell King - ARM Linux
• [PATCH 1/11] arch/arm/plat-pxa: Correct NULL test   Julia Lawall
• [RFC PATCH v2 2/2] ARM: VFP: preserve the HW context when calling signal handlers   Russell King - ARM Linux
• [RFC PATCH v2 2/2] ARM: VFP: preserve the HW context when calling signal handlers   Imre Deak
• [RFC PATCH v2 1/2] ARM: VFP: add support to sync the VFP state of the current thread   Russell King - ARM Linux
• [RFC PATCH v2 1/2] ARM: VFP: add support to sync the VFP state of the current thread   Russell King - ARM Linux
• [RFC PATCH v2 1/2] ARM: VFP: add support to sync the VFP state of the current thread   Russell King - ARM Linux
• [RFC PATCH v2 1/2] ARM: VFP: add support to sync the VFP state of the current thread   Russell King - ARM Linux
• [RFC PATCH v2 2/2] ARM: VFP: preserve the HW context when calling signal handlers   Russell King - ARM Linux
• [RFC PATCH v2 1/2] ARM: VFP: add support to sync the VFP state of the current thread   Imre Deak
• [RFC PATCH v2 2/2] ARM: VFP: preserve the HW context when calling signal handlers   Imre Deak
• [PATCH 00/16] remove trailing spaces in messages   Frans Pop
• [PATCH 02/16] arm: remove trailing spaces in messages   Frans Pop
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Daniel Mack
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Daniel Mack
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Mike Rapoport
• race between kmap shootdown and cache maintenance   Russell King - ARM Linux
• [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)   Fabio Estevam
• [PATCH] ep93xx: Add support for Snapper CL15 module   Ryan Mallon
• [PATCH] shmobile: G3EVM, G4EVM and AP4EVB defconfigs   Magnus Damm
• Using PXA arm board with MAX7319 GPIO expander input   Jebediah Huang
• Using PXA arm board with MAX7319 GPIO expander input   Eric Miao
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Eric Miao
• [PATCH 3/5] mfd: use genirq in 88pm860x   Haojian Zhuang
• USB mass storage and ARM cache coherency   Pavel Machek
• Using PXA arm board with MAX7319 GPIO expander input   Jebediah Huang
• USB mass storage and ARM cache coherency   Andreas Mohr
• Using PXA arm board with MAX7319 GPIO expander input   Daniel Mack
• Using PXA arm board with MAX7319 GPIO expander input   Jebediah Huang
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Dennis Semakin
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Dennis Semakin
• [PATCH 1/3] gpiolib: make names array and its values const   Uwe Kleine-König
• [PATCH 2/3] gpiolib: a gpio is unsigned, so use %u to print it   Uwe Kleine-König
• [PATCH 3/3] gpiolib: document that names can contain printk format specifiers   Uwe Kleine-König
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Uwe Kleine-König
• [PATCH 3/3] gpiolib: document that names can contain printk format specifiers   Uwe Kleine-König
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Dennis Semakin
• [PATCH 1/3] gpiolib: make names array and its values const   Baruch Siach
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Dennis Semakin
• smsc911x suspend/resume   Mike Rapoport
• [PATCH 1/3] gpiolib: make names array and its values const   Uwe Kleine-König
• USB mass storage and ARM cache coherency   Catalin Marinas
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Dennis Semakin
• USB mass storage and ARM cache coherency   Andy Green
• smsc911x suspend/resume   Daniel Mack
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Daniel Mack
• USB mass storage and ARM cache coherency   Catalin Marinas
• USB mass storage and ARM cache coherency   Pavel Machek
• [PATCH] ARM: mach-shmobile: optimize get_irqnr_preamble/and_base macros   Magnus Damm
• [PATCH] ARM: mach-shmobile: early console support using earlyprintk   Magnus Damm
• Using PXA arm board with MAX7319 GPIO expander input   Jebediah Huang
• USB mass storage and ARM cache coherency   Catalin Marinas
• smsc911x suspend/resume   Mike Rapoport
• Using PXA arm board with MAX7319 GPIO expander input   Daniel Mack
• smsc911x suspend/resume   Daniel Mack
• smsc911x suspend/resume   Steve.Glendinning at smsc.com
• smsc911x suspend/resume   Daniel Mack
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Dennis Semakin
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Dennis Semakin
• smsc911x suspend/resume   Steve.Glendinning at smsc.com
• Using PXA arm board with MAX7319 GPIO expander input   Marc Zyngier
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Daniel Mack
• Using PXA arm board with MAX7319 GPIO expander input   Daniel Mack
• atmel-mci / at91_mci   Fabian Godehardt
• [PATCH] ux500: fix DEBUG_LL/earlyprintk   Rabin Vincent
• [PATCH] amba-pl011: support hardware flow control   Rabin Vincent
• [PATCH] amba-pl011: support hardware flow control   Russell King - ARM Linux
• smsc911x suspend/resume   Mike Rapoport
• [PXA320] How to find I/O registers, base address of ASIX ethernet chip?   Dennis Semakin
• [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)   Nguyen Dinh-R00091
• smsc911x suspend/resume   Mike Rapoport
• smsc911x suspend/resume   Daniel Mack
• smsc911x suspend/resume   Mike Rapoport
• [PATCH] ep93xx: Add support for Snapper CL15 module   H Hartley Sweeten
• [PATCH] input: mark {corgi,spitz,tosa}kbd driver deprecated   Pavel Machek
• [PATCH] input: schedule corgi_ssp and corgi_ts to be removed   Pavel Machek
• [RFC PATCH] ARM: Change the mandatory barriers implementation   Abhijeet Dharmapurikar
• [PATCH] Mailbox: disable mailbox interrupt when request queue   Fernando Guzman Lugo
• [PATCH] ep93xx: Add support for Snapper CL15 module   Ryan Mallon
• [PATCH] ep93xx: Add support for Snapper CL15 module   H Hartley Sweeten
• [PATCH] ep93xx: Add support for Snapper CL15 module   H Hartley Sweeten
• race between kmap shootdown and cache maintenance   Gary King
• LPC32XX architecture files (updated v3)   wellsk40 at gmail.com
• [PATCH 01/14] ARM: LPC32XX: Initial architecture header files   wellsk40 at gmail.com
• [PATCH 02/14] ARM: LPC32XX: Debug and IRQ macros   wellsk40 at gmail.com
• [PATCH 03/14] ARM: LPC32XX: Clock driver   wellsk40 at gmail.com
• [PATCH 04/14] ARM: LPC32XX: GPIO, timer, and IRQ drivers   wellsk40 at gmail.com
• [PATCH 05/14] ARM: LPC32XX: System suspend support   wellsk40 at gmail.com
• [PATCH 06/14] ARM: LPC32XX: Serial support code   wellsk40 at gmail.com
• [PATCH 07/14] ARM: LPC32XX: Misc support functions   wellsk40 at gmail.com
• [PATCH 08/14] ARM: LPC32XX: Phytec 3250 platform support   wellsk40 at gmail.com
• [PATCH 09/14] ARM: LPC32XX: Arch config menu supoport and makefiles   wellsk40 at gmail.com
• [PATCH 10/14] ARM: LPC32XX: Default PHY3250 kernel config (ramdisk)   wellsk40 at gmail.com
• [PATCH 11/14] ARM: Add support for the LPC32XX arch   wellsk40 at gmail.com
• [PATCH 12/14] AMBA: CLCD: LPC32XX register swap in the clcd header file   wellsk40 at gmail.com
• [PATCH 13/14] i2c: Add support for the LPC32XX arch   wellsk40 at gmail.com
• [PATCH 14/14] WATCHDOG: Add support for the LPC32XX arch   wellsk40 at gmail.com
• [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)   Fabio Estevam
• Using PXA arm board with MAX7319 GPIO expander input   Eric Miao
• Using PXA arm board with MAX7319 GPIO expander input   Eric Miao
• [PATCH] input: schedule corgi_ssp and corgi_ts to be removed   Eric Miao
• [PATCH] ARM: mach-shmobile: optimize get_irqnr_preamble/and_base macros   Paul Mundt
• [PATCH] ep93xx: Add support for Snapper CL15 module   Ryan Mallon
• race between kmap shootdown and cache maintenance   Nicolas Pitre
• race between kmap shootdown and cache maintenance   Gary King
• race between kmap shootdown and cache maintenance   Nicolas Pitre
• Using PXA arm board with MAX7319 GPIO expander input   Marc Zyngier
• Using PXA arm board with MAX7319 GPIO expander input   Eric Miao
• [PATCH] input: schedule corgi_ssp and corgi_ts to be removed   Dmitry Torokhov
• [PATCH 01/14] ARM: LPC32XX: Initial architecture header files   Uwe Kleine-König
• [PATCH 02/14] ARM: LPC32XX: Debug and IRQ macros   Uwe Kleine-König
• [PATCH 01/14] ARM: LPC32XX: Initial architecture header files   Uwe Kleine-König
• [PATCH 01/14] ARM: LPC32XX: Initial architecture header files   Russell King - ARM Linux
• El mensaje enviado a Tiendas.mixtas espera la aprobacion del moderador   tiendas.mixtas-bounces at charanga.es
• Using PXA arm board with MAX7319 GPIO expander input   Marc Zyngier
• sound related i.MX patches   Sascha Hauer
• [PATCH 1/3] add ssi header file   Sascha Hauer
• [PATCH 2/3] pca100: add sound support   Sascha Hauer
• [PATCH 3/3] i.MX pcm043: Add AC97 sound support   Sascha Hauer
• [PATCH 03/14] ARM: LPC32XX: Clock driver   Uwe Kleine-König
• [PATCH 04/14] ARM: LPC32XX: GPIO, timer, and IRQ drivers   Uwe Kleine-König
• [PATCH] input: schedule corgi_ssp and corgi_ts to be removed   Eric Miao
• [PATCH] input: schedule corgi_ssp and corgi_ts to be removed   Eric Miao
• [PATCH] amba-pl011: support hardware flow control   Rabin VINCENT
• atmel-mci / at91_mci   Manuel Stahl
• [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)   Amit Kucheria
• Kernel may hang when opening a tty device   Sammy Chan
• Kernel stuck at at91_change_speed   Sammy Chan
• [PATCH 01/14] ARM: LPC32XX: Initial architecture header files   Uwe Kleine-König
• [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)   Nguyen Dinh-R00091
• [PATCHv3 0/7] Initial Freescale i.MX51 SoC support   Amit Kucheria
• [PATCHv3 1/7] mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 family   Amit Kucheria
• [PATCHv3 2/7] mxc: refactor timer code to use timer versions   Amit Kucheria
• [PATCHv3 3/7] mxc: changes to common plat-mxc code to add support for i.MX5   Amit Kucheria
• [PATCHv3 4/7] mxc: Core support for Freescale i.MX5 series   Amit Kucheria
• [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5)   Amit Kucheria
• [PATCHv3 6/7] mxc: Add mx51_defconfig   Amit Kucheria
• [PATCHv3 7/7] mxc: MAINTAINERS: Add maintainer for mach-mx5   Amit Kucheria
• [PATCH 05/14] ARM: LPC32XX: System suspend support   Uwe Kleine-König
• [PATCHv3 0/7] Initial Freescale i.MX51 SoC support   Amit Kucheria
• [PATCH 01/14] ARM: LPC32XX: Initial architecture header files   H Hartley Sweeten
• MXC: mx31moboard patches for next merge window   Valentin Longchamp
• [PATCH 1/3] mx31moboard: change initial reset status for robot microcontollers   Valentin Longchamp
• [PATCH 2/3] mx31moboard: make usbh2 enable gpio claim more atomic   Valentin Longchamp
• [PATCH 3/3] mx31moboard: support for the smartbot baseboard   Valentin Longchamp
• [PATCH 01/14] ARM: LPC32XX: Initial architecture header files   Russell King - ARM Linux
• [PATCH] amba-pl011: support hardware flow control   Russell King - ARM Linux
• [PATCH 01/14] ARM: LPC32XX: Initial architecture header files   Kevin Wells
• [PATCH 03/14] ARM: LPC32XX: Clock driver   Kevin Wells
• [PATCH 05/14] ARM: LPC32XX: System suspend support   Kevin Wells
• [PATCH] ep93xx: Add support for Snapper CL15 module   Ryan Mallon
• [PATCH 1/2] [ARM] Kirkwood: add LaCie Internet Space v2 support   Simon Guinot
• [PATCH 2/2] [ARM] Kirkwood: define SATA LED for netspace_v2   Simon Guinot
• [PATCH 1/2] [ARM] Orion5x: set valid GPIO inhibit power-off for d2net   Simon Guinot
• [PATCH 2/2] [ARM] Orion5x: enable SATA LED blinking for d2net   Simon Guinot
• [PATCHv3 0/7] Initial Freescale i.MX51 SoC support   Uwe Kleine-König
• [PATCHv3 0/7] Initial Freescale i.MX51 SoC support   Amit Kucheria
• [PATCH] amba-pl011: support hardware flow control   Russell King - ARM Linux
• When to send patches?   Alberto Panizzo
• [PATCH] amba-pl011: support hardware flow control   Jamie Lokier
• [PATCH]NUC900 add gpio virtual memory map   Qiang Wang
• [PATCH]NUC900 clk enable problem fix   Qiang Wang
• [PATCH] ep93xx: Add support for Snapper CL15 module   Ryan Mallon
• [PATCH] ep93xx: Add support for Snapper CL15 module   H Hartley Sweeten
• [Linux-arm-nuc900] Re: [PATCH]NUC900 clk enable problem fix   Wan ZongShun
• [Linux-arm-nuc900] Re: [PATCH]NUC900 add gpio virtual memory map   Wan ZongShun
• [PATCH] Eurotech Zeus : Making USB port 2 work   Amit Walambe
• [PATCH RFC 1/2] MUSB: CPPI 4.1 DMA driver (take 4)   Gupta, Ajay Kumar
• [PATCH 0/3] mx25: framebuffer support   Baruch Siach
• [PATCH 1/3] imxfb: add support for i.MX25   Baruch Siach
• [PATCH 2/3] mx25: add platform support for imxfb   Baruch Siach
• [PATCH 3/3] mx25pdk: add LCD support   Baruch Siach
• [PATCH 1/3] imxfb: add support for i.MX25   Uwe Kleine-König
• [PATCH 2/3] mx25: add platform support for imxfb   Uwe Kleine-König
• [PATCH] ARM: OMAP4 clock domain: Add check for avoiding dependency related update.   Abhijit Pagare
• [PATCH 1/3] imxfb: add support for i.MX25   Baruch Siach
• [PATCH 1/3] imxfb: add support for i.MX25   Uwe Kleine-König
• [PATCH] amba-pl011: support hardware flow control   Russell King - ARM Linux
• [PATCH 2/3] mx25: add platform support for imxfb   Baruch Siach
• [PATCH] Eurotech Zeus : Making USB port 2 work   Marc Zyngier
• When to send patches?   Sascha linux-arm
• [PATCH] amba-pl011: support hardware flow control   Jamie Lokier
• [PATCHv3 0/7] Initial Freescale i.MX51 SoC support   Sascha Hauer
• MXC: mx31moboard patches for next merge window   Sascha Hauer
• [PATCHv3 0/7] Initial Freescale i.MX51 SoC support   Amit Kucheria
• [PATCH 1/2] [ARM] pxa: introduce PXA_SSP_LEGACY for legacy SSP API   Eric Miao
• [PATCH 2/2] ASoC: Remove legacy PXA SSP API usage   Eric Miao
• [PATCH 2/3] mx25: add platform support for imxfb   Baruch Siach
• [PATCH v2] imxfb: add support for i.MX25   Baruch Siach
• [PATCH 2/2] ASoC: Remove legacy PXA SSP API usage   Mark Brown
• [PATCH 2/2] ASoC: Remove legacy PXA SSP API usage   Eric Miao
• [PATCH] amba-pl011: support hardware flow control   Rabin VINCENT
• [PATCH] async-tx: fix buffer sumbission error handling in ipu_idma.c   Guennadi Liakhovetski
• [PATCH] async-tx: fix buffer sumbission error handling in ipu_idma.c   Dan Williams
• Serial over USB to gprs modem; no data connection   Timo TH
• [PATCH] mach-orion5x: D-link DNS-323 revision A1 power LED   Laurie Bradshaw
• [PATCH v2] imxfb: add support for i.MX25   Uwe Kleine-König
• [PATCH v2] async-tx: fix buffer sumbission error handling in ipu_idma.c   Guennadi Liakhovetski
• [PATCH] OMAP: hsmmc: fix memory leak   Tony Lindgren
• [PATCH v2] async-tx: fix buffer sumbission error handling in ipu_idma.c   Dan Williams
• Kernel Oops while cfi_amdstd_read()   Ricardo Martínez
• [PATCH v2] async-tx: fix buffer sumbission error handling in ipu_idma.c   Uwe Kleine-König
• [PATCH v2] async-tx: fix buffer sumbission error handling in ipu_idma.c   Guennadi Liakhovetski
• [PATCH] amba-pl011: support hardware flow control   Russell King - ARM Linux
• [PATCH] ARM: SMDK6410: Fix modular build of AC97 audio driver   Mark Brown
• [PATCH v2] async-tx: fix buffer sumbission error handling in ipu_idma.c   Dan Williams
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   adharmap at codeaurora.org
• [PATCH 1/2] dma: define barrierless versions of map and unmap area   adharmap at codeaurora.org
• [PATCH 2/2] dma: fix scatter-gather api to use barrierless map/unmap functions   adharmap at codeaurora.org
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   Russell King - ARM Linux
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   Randy Dunlap
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   Russell King - ARM Linux
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   Abhijeet Dharmapurikar
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   Abhijeet Dharmapurikar
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   Russell King - ARM Linux
• [PATCH] ARM: OMAP4 clock domain: Add check for avoiding dependency related update.   Paul Walmsley
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   FUJITA Tomonori
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   Randy Dunlap
• [PATCH] omap2/3/4: serial: fix coding style indentaion   vikram pandita
• [PATCH] omap2/3/4: Introducing 'gpmc-nand.c' for GPMC specific NAND init   Vimal Singh
• [PATCH] omap3: SDP: Introducing 'board-sdp-flash.c' for flash init   Vimal Singh
• [PATCH] omap3: Add support for flash on 3430SDP board   Vimal Singh
• [PATCH 00/17] omap updates for 2.6.34 merge window, part 1   Tony Lindgren
• [PATCH 01/17] omap: convert boards to use physmap-flash   Tony Lindgren
• [PATCH 02/17] MTD: remove no longer used OMAP flash map   Tony Lindgren
• [PATCH 03/17] omap iommu: cleanup iommu page address mask and definitions   Tony Lindgren
• [PATCH 04/17] omap: iommu: fix incorrect address for supersection 1st entry   Tony Lindgren
• [PATCH 05/17] omap iommu: fix incorrect address for largepage 1st entry   Tony Lindgren
• [PATCH 06/17] omap: McBSP: Use macros for all register read/write operations   Tony Lindgren
• [PATCH 07/17] omap: McBSP: Modify macros/functions API for easy cache access   Tony Lindgren
• [PATCH 08/17] omap: McBSP: Introduce caching in register write operations   Tony Lindgren
• [PATCH 09/17] omap: McBSP: Use cache when modifying individual register bits   Tony Lindgren
• [PATCH 10/17] omap1: mailbox: kill compile warning   Tony Lindgren
• [PATCH 11/17] omap2/3/4: mailbox: kill compile warning in mailbox.c   Tony Lindgren
• [PATCH 12/17] omap2/3/4: gpmc: kill compile warning   Tony Lindgren
• [PATCH 13/17] omap2/3/4: gpmc: avoid section definitions on headers   Tony Lindgren
• [PATCH 14/17] omap2/3/4: serial: fix coding style indentaion   Tony Lindgren
• [PATCH 15/17] omap2/3/4: Introducing 'gpmc-nand.c' for GPMC specific NAND init   Tony Lindgren
• [PATCH 16/17] omap3: SDP: Introducing 'board-sdp-flash.c' for flash init   Tony Lindgren
• [PATCH 17/17] omap3: Add support for flash on 3430SDP board   Tony Lindgren
• [PATCH] ARM: OMAP4 clock domain: Add check for avoiding dependency related update.   Pagare, Abhijit
• [PATCH v2] imxfb: add support for i.MX25   Baruch Siach
• [PATCH] imxfb: add support for i.MX25   Baruch Siach
• [PATCH] Eurotech Zeus : Making USB port 2 work   Amit Walambe
• [PATCH] input: schedule corgi_ssp and corgi_ts to be removed   Dmitry Torokhov
• [PATCH] input: schedule corgi_ssp and corgi_ts to be removed   Eric Miao
• AT91SAM9263 USB Serial hang?   Timo TH
• Clean/Invalidate L1/L2 DCache on userspace.   Richard Liu
• [PATCH][KS8695] Mark network interface as running on ifconfig up   Yegor Yefremov
• [PATCH] Eurotech Zeus : Making USB port 2 work   Marc Zyngier
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   Catalin Marinas
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   Catalin Marinas
• [PATCH][KS8695] Mark network interface as running on ifconfig up   Uwe Kleine-König
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   Russell King - ARM Linux
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   Russell King - ARM Linux
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   Catalin Marinas
• [PATCH][KS8695] Mark network interface as running on ifconfig up   Yegor Yefremov
• [PATCH 3/5] mfd: use genirq in 88pm860x   Samuel Ortiz
• [PATCH 5/5] input: support onkey in 88pm860x   Samuel Ortiz
• [PATCH 1/2] [MMCI] add DMA support using dmaengine   Linus Walleij
• [PATCH 2/2] [U300] Add MMCI DMA platform config   Linus Walleij
• [PATCH] amba-pl011: support hardware flow control   Rabin VINCENT
• at91 preempt oops   Paul Thomas
• [PATCH] imx serial driver: NULL pointer dereference in serial_imx_probe/remove   Bas Vermeulen
• [PATCH 00/13] OMAP: clock: cleanup series for 2.6.34   Paul Walmsley
• [PATCH 01/13] OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation   Paul Walmsley
• [PATCH 02/13] OMAP4 clock: drop the CLOCK_IN_OMAP4430 clock flag   Paul Walmsley
• [PATCH 03/13] OMAP2xxx clock: GFX functional clock rates are not independently changeable   Paul Walmsley
• [PATCH 04/13] OMAP2xxx clock: drop DELAYED_APP flag from non-clksel clocks   Paul Walmsley
• [PATCH 05/13] OMAP2 clock: drop CONFIG_PARTICIPANT clock flag   Paul Walmsley
• [PATCH 06/13] OMAP clock: compress clock flags down to a u8   Paul Walmsley
• [PATCH 07/13] OMAP clock: drop .id field; ensure each clock has a unique name   Paul Walmsley
• [PATCH 08/13] OMAP3/4 clock: split into per-chip family files   Paul Walmsley
• [PATCH 09/13] OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files   Paul Walmsley
• [PATCH 10/13] OMAP2430 clock: make func_96m_ck parent-selectable   Paul Walmsley
• [PATCH 11/13] OMAP2 clock: drop DELAYED_APP clock flag   Paul Walmsley
• [PATCH 12/13] OMAP clock: drop RATE_FIXED clock flag   Paul Walmsley
• [PATCH 13/13] OMAP4 clock: drop the ALWAYS_ENABLED clock flag   Paul Walmsley
• smsc911x suspend/resume   Steve.Glendinning at smsc.com
• [PATCH] imx serial driver: NULL pointer dereference in serial_imx_probe/remove   Baruch Siach
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   Abhijeet Dharmapurikar
• Compiler for Atmel AT91SAMG20   Andrew
• [RFC 0/2] fix dma_map_sg not to do barriers for each buffer   Abhijeet Dharmapurikar
• [GIT PULL] omap fix for 2.6.33-rc7   Tony Lindgren
• [PATCH 00/19] omap updates for 2.6.34 merge window, part 2   Tony Lindgren
• [PATCH 01/19] omap_hsmmc: Move gpio and regulator control from board file   Tony Lindgren
• [PATCH 02/19] omap: Rename mmc-twl4030 files to hsmmc   Tony Lindgren
• [PATCH 03/19] omap: Rename hsmmc symbols to reflect independence from twl4030   Tony Lindgren
• [PATCH 04/19] omap: Reconnect hsmmc context loss count   Tony Lindgren
• [PATCH 05/19] omap: RX51: Remux to pull eMMC lines down when powering off   Tony Lindgren
• [PATCH 06/19] omap_hsmmc: Allow for power saving without going off   Tony Lindgren
• [PATCH 07/19] omap_hsmmc: Fix disable timeouts   Tony Lindgren
• [PATCH 08/19] omap_hsmmc: Ensure regulator enable / disable are paired   Tony Lindgren
• [PATCH 09/19] omap_hsmmc: Allow for a shared VccQ   Tony Lindgren
• [PATCH 10/19] omap_hsmmc: allow compile without regulator framework   Tony Lindgren
• [PATCH 11/19] omap3: Clean-up for omap_mux_init   Tony Lindgren
• [PATCH 12/19] omap3: pm: Add T2 Keypad as a wakeup source   Tony Lindgren
• [PATCH 13/19] AM35xx: Introduce am35xx.h file   Tony Lindgren
• [PATCH 14/19] AM35xx: Add AM35xx intr_clr & sw_rst cntrl reg bit definition   Tony Lindgren
• [PATCH 15/19] AM35xx: Update irq.h for AM35xx IPSS module interrupts   Tony Lindgren
• [PATCH 16/19] arm: omap: kill compile warning on board-4430-sdp.c   Tony Lindgren
• [PATCH 17/19] OMAP4: IRQ: Add McPDM IRQ definition   Tony Lindgren
• [PATCH 18/19] ARM: OMAP4: Add McPDM base address   Tony Lindgren
• [PATCH 19/19] OMAP4: MCPDM: Register McPDM platform device   Tony Lindgren
• [PATCH] amba-pl011: support hardware flow control   Linus Walleij
• at91 preempt oops   Uwe Kleine-König
• [PATCH 1/2] arm/at91: Don't disable irqs in set_next_event and set_mode callbacks   Uwe Kleine-König
• [PATCH 1/5] ARM: SMDK64XX: Enable AC97 device   Mark Brown
• [PATCH 2/5] ARM: SMDK2443: Enable AC97 device   Mark Brown
• [PATCH 3/5] ARM: S3C64XX: Add AC97 platform resources   Mark Brown
• [PATCH 4/5] ARM: S3C2443: GPIO: Correct AC97 pin defines   Mark Brown
• [PATCH 5/5] ARM: SMDK6410: Fix modular build of AC97 audio driver   Mark Brown
• [WARNING] mxc_w1_probe should not be __init modified   Alberto Panizzo
• [PATCH 1/2] ARM: ixp2000: fix type of ixp2000_timer_interrupt   Uwe Kleine-König
• [WARNING] mxc_w1_probe should not be __init modified   Uwe Kleine-König
• [PULL REQUEST] runtime physoffset [Was: change boot requirements]   Uwe Kleine-König
• 11MPCore SCU performance counters in perf   Will Deacon
• [PATCH 12/14] AMBA: CLCD: LPC32XX register swap in the clcd header file   Russell King - ARM Linux
• [PATCH 05/10] apply anyka chip ID   Gump Yang
• [PATCH 05/10] apply anyka chip ID   Gump Yang
• [PATCH 12/14] AMBA: CLCD: LPC32XX register swap in the clcd header file   Kevin Wells
• [PATCH 12/14] AMBA: CLCD: LPC32XX register swap in the clcd header file   Russell King - ARM Linux
• [PATCH] Help fix SMP boot issues with L2 cache   Russell King - ARM Linux
• [PATCH 07/14] ARM: LPC32XX: Misc support functions   Uwe Kleine-König
• [PATCH 08/14] ARM: LPC32XX: Phytec 3250 platform support   Uwe Kleine-König
• [PATCH 2/2] [U300] Fix the DMA configuration   Linus Walleij
• i2c-imx: Autoprobe of eeproms   Mattias Walstrom
• [PATCH] Mailbox: free mailbox interrupt before freeing blk queue   Fernando Guzman Lugo
• [PATCH] Mailbox: flush pending deferred works before freeing blk q=   Fernando Guzman Lugo
• race between kmap shootdown and cache maintenance   Gary King
• Git pull request: Orion/Kirkwood stuff for 2.6.34   Nicolas Pitre
• i2c-imx: Autoprobe of eeproms   Wolfram Sang
• i2c-imx: Autoprobe of eeproms   Uwe Kleine-König
• [PATCH] iop-adma: redundant/wrong tests in iop_*_count()?   Roel Kluin
• [PATCH 00/10] ARM: ftrace: cleanups, Thumb-2, and dynamic ftrace   Rabin Vincent
• [PATCH 01/10] ARM: ftrace: clean up mcount assembly indentation   Rabin Vincent
• [PATCH 02/10] ARM: ftrace: document mcount formats   Rabin Vincent
• [PATCH 03/10] ftrace: allow building without frame pointers   Rabin Vincent
• [PATCH 04/10] ARM: ftrace: allow building without frame pointers   Rabin Vincent
• [PATCH 05/10] ARM: ftrace: add ENDPROC annotations   Rabin Vincent
• [PATCH] ARM: ftrace: add ENDPROC annotations   Rabin Vincent
• [PATCH 06/10] ARM: ftrace: add Thumb-2 support   Rabin Vincent
• [PATCH 06/10] ARM: ftrace: add Thumb-2 support   Rabin Vincent
• [PATCH 07/10] ftrace: pass KBUILD_CFLAGS to record_mcount.pl   Rabin Vincent
• [PATCH 08/10] ARM: ftrace: fix and update dynamic ftrace   Rabin Vincent
• [PATCH 09/10] ARM: ftrace: add Thumb-2 support to dynamic ftrace   Rabin Vincent
• [PATCH 10/10] ARM: ftrace: enable dynamic ftrace   Rabin Vincent
• [PATCH 2/2] ftrace: re-enable dynamic ftrace for ARM   Rabin Vincent
• [PATCH 01/10] ARM: ftrace: clean up mcount assembly indentation   Uwe Kleine-König
• [PATCH 02/10] ARM: ftrace: document mcount formats   Uwe Kleine-König
• [PATCH 1/2] pxa/imote2: Add defconfig for the imote2 platform.   Stefan Schmidt
• [PATCH 1/2] pxa/imote2: Add defconfig for the imote2 platform.   Stefan Schmidt
• [PATCH 2/2] pxa/imote2: Remove redundant pin entry for nCS.   Stefan Schmidt
• [PATCH 05/10] ARM: ftrace: add ENDPROC annotations   Catalin Marinas
• [PATCH 06/10] ARM: ftrace: add Thumb-2 support   Catalin Marinas
• [PATCH] Help fix SMP boot issues with L2 cache   Catalin Marinas
• [PATCH] Help fix SMP boot issues with L2 cache   Russell King - ARM Linux
• smsc911x suspend/resume   mike at compulab.co.il
• [PATCH 1/2 v2] pxa/imote2: Add defconfig for the imote2 platform.   Stefan Schmidt
• [PATCH 08/10] ARM: ftrace: fix and update dynamic ftrace   Uwe Kleine-König
• [PATCH 08/10] ARM: ftrace: fix and update dynamic ftrace   Rabin Vincent
• apply chip ID   杨城
• apply chip ID   Stefan Schmidt
• [PATCH 06/10] ARM: ftrace: add Thumb-2 support   Rabin Vincent
• [PATCH 05/14] ARM: LPC32XX: System suspend support   Pavel Machek
• apply chip ID   Russell King - ARM Linux
• [PATCH 05/14] ARM: LPC32XX: System suspend support   Russell King - ARM Linux
• i2c-imx: Autoprobe of eeproms   Ben Dooks
• [PATCH] iop: n2100: enable serial interrupt   Aaro Koskinen
• [PATCH] iop: n2100: enable serial interrupt   Lennert Buytenhek
• [PATCH 1/2] PXA3xx: Add support for preconfiguring SMEMC   Marek Vasut
• [PATCH 2/2] Colibri/PXA320: Preconfigure SMEMC   Marek Vasut
• apply chip ID   杨城
• apply chip ID   Haojian Zhuang
• apply chip ID   杨城
• What's in genesis-2.6.git for 2.6.34?   Paul Mundt
• [PATCH] imx-serial-excessive-status-clearing-on-break.patch   Andy Green
• [PATCH 0/3] [MMCI] remove custom DBG macro and printk   Linus Walleij
• [PATCH 1/3] [MMCI] remove custom DBG macro and printk   Linus Walleij
• [PATCH 2/3] [MMCI] Pass max frequency from platform   Linus Walleij
• [PATCH 3/3] [U300] Set f_max to 24 MHz for MMC   Linus Walleij
• [PATCH 3/3] [U300] Set f_max to 24 MHz for MMC   David Vrabel
• [PATCH 3/3] [U300] Set f_max to 24 MHz for MMC   Linus Walleij
• [PATCH 3/3] [U300] Set f_max to 24 MHz for MMC   Linus Walleij
• [PATCH - v7] Support for Embedian MXM-8x10   Eric Miao
• [PATCH 1/2 v2] pxa/imote2: Add defconfig for the imote2 platform.   Eric Miao
• [PATCH 2/2] pxa/imote2: Remove redundant pin entry for nCS.   Eric Miao
• [PATCH 1/2] PXA3xx: Add support for preconfiguring SMEMC   Eric Miao
• atmel-mci / at91_mci   Sebastian Heutling
• [PATCH] iop: n2100: enable serial interrupt   Aaro Koskinen
• [PATCH] iop: n2100: enable serial interrupt   Mikael Pettersson
• [PATCH 00/13] OMAP: clock: cleanup series for 2.6.34   Paul Walmsley
• [PATCH v2 08/13] OMAP3/4 clock: split into per-chip family files   Paul Walmsley
• [PATCH v2 12/13] OMAP clock: drop RATE_FIXED clock flag   Paul Walmsley
• [PATCH 00/19] OMAP: more clock/powerdomain/hwmod patches for 2.6.34   Paul Walmsley
• [PATCH 01/19] OMAP: omap_device: add omap_device_is_valid()   Paul Walmsley
• [PATCH 02/19] OMAP: omap_device: when 'called from invalid state', print state   Paul Walmsley
• [PATCH 03/19] OMAP3: clock: use std _MASK suffix for CM_FCLKEN_IVA2 defines   Paul Walmsley
• [PATCH 04/19] OMAP3: Clock: Added IDLEST definitions for SGX   Paul Walmsley
• [PATCH 05/19] OMAP2/3 PM: Adding powerdomain APIs for reading the next logic and mem state   Paul Walmsley
• [PATCH 06/19] OMAP3 PM: Defining .pwrsts_logic_ret field for core power domain structure   Paul Walmsley
• [PATCH 07/19] OMAP3 PM: Adding counters for power domain logic off and mem off during retention.   Paul Walmsley
• [PATCH 08/19] OMAP2/3 clock: Extend find_idlest() to pass back idle state value   Paul Walmsley
• [PATCH 09/19] AM35xx: Add clock support for new modules on AM35xx   Paul Walmsley
• [PATCH 10/19] OMAP3 clock: Check return values for clk_get()   Paul Walmsley
• [PATCH 11/19] OMAP2/3: PRCM: fix misc. compiler warnings   Paul Walmsley
• [PATCH 12/19] OMAP3 clock: Remove FreqSel for 3630   Paul Walmsley
• [PATCH 13/19] OMAP3: hwmod: support to specify the offset position of various SYSCONFIG register bits.   Paul Walmsley
• [PATCH 14/19] OMAP: HWMOD: Add support for early device register into omap device layer   Paul Walmsley
• [PATCH 15/19] OMAP3630: Clock: Workaround for DPLL HS divider limitation   Paul Walmsley
• [PATCH 16/19] ARM: OMAP4 clock domain: Add check for avoiding dependency related update.   Paul Walmsley
• [PATCH 17/19] OMAP3 clock: introduce DPLL4 Jtype   Paul Walmsley
• [PATCH 18/19] OMAP3 clock: Introduce 3630 DPLL4 HSDivider changes   Paul Walmsley
• [PATCH 19/19] OMAP3 clock: add support for 192Mhz DPLL4M2 output   Paul Walmsley
• [PATCH 1/2] PXA3xx: Add support for preconfiguring SMEMC   Marek Vasut
• how to type reverse ' on spitz?   Pavel Machek
• USB mass storage and ARM cache coherency   Shilimkar, Santosh
• USB mass storage and ARM cache coherency   Oliver Neukum
• USB mass storage and ARM cache coherency   Russell King - ARM Linux
• how to type reverse ' on spitz?   Stanislav Brabec
• USB mass storage and ARM cache coherency   Gadiyar, Anand
• USB mass storage and ARM cache coherency   Shilimkar, Santosh
• USB mass storage and ARM cache coherency   Oliver Neukum
• 11MPCore SCU performance counters in perf   Jamie Iles
• USB mass storage and ARM cache coherency   Russell King - ARM Linux
• [PATCH 12/19] OMAP3 clock: Remove FreqSel for 3630   Sergei Shtylyov
• USB mass storage and ARM cache coherency   Oliver Neukum
• USB mass storage and ARM cache coherency   Shilimkar, Santosh
• USB mass storage and ARM cache coherency   Oliver Neukum
• USB mass storage and ARM cache coherency   Shilimkar, Santosh
• USB mass storage and ARM cache coherency   Oliver Neukum
• USB mass storage and ARM cache coherency   Shilimkar, Santosh
• [PATCH 0/3] mx25: framebuffer support   Baruch Siach
• [PATCH] ARM: RealView SD/MMC Card detection and write-protect using GPIOLIB   Colin Tuckley
• [PATCH 0/3] mx25: framebuffer support   Florian Tobias Schandinat
• USB mass storage and ARM cache coherency   Alan Stern
• [PATCH] imx-serial-excessive-status-clearing-on-break.patch   Sascha Hauer
• [PATCH 12/19] OMAP3 clock: Remove FreqSel for 3630   Paul Walmsley
• [PATCH v2 08/13] OMAP3/4 clock: split into per-chip family files   Tony Lindgren
• [PATCH 08/14] ARM: LPC32XX: Phytec 3250 platform support   Kevin Wells
• [PATCH 12/14] AMBA: CLCD: LPC32XX register swap in the clcd header file   Kevin Wells
• [PATCH 1/2] arm/pxa: Enable check_scoop_reg() only if CONFIG_PM is set.   Stefan Schmidt
• [PATCH 2/2] arm/pxa: Let zeus.c link without CONFIG_PM enabled.   Stefan Schmidt
• [PATCH v2 08/13] OMAP3/4 clock: split into per-chip family files   Paul Walmsley
• [PATCH 2/2] arm/pxa: Let zeus.c link without CONFIG_PM enabled.   Marc Zyngier
• [PATCH v2 08/13] OMAP3/4 clock: split into per-chip family files   Russell King - ARM Linux
• [PATCH v2 08/13] OMAP3/4 clock: split into per-chip family files   Tony Lindgren
• [PATCH v2 08/13] OMAP3/4 clock: split into per-chip family files   Paul Walmsley
• [PATCH][KS8695] Mark network interface as running on ifconfig up   David Miller
• USB mass storage and ARM cache coherency   Ming Lei
• PL-330 DMA driver   jassi brar
• PL-330 DMA driver   Joonyoung Shim
• [PATCH 2/2] arm/pxa: Let zeus.c link without CONFIG_PM enabled.   Stefan Schmidt
• USB mass storage and ARM cache coherency   Shilimkar, Santosh
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• USB mass storage and ARM cache coherency   Oliver Neukum
• USB mass storage and ARM cache coherency   Oliver Neukum
• USB mass storage and ARM cache coherency   Shilimkar, Santosh
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• [PATCH 0/3] mx25: framebuffer support   Sascha Hauer
• PL-330 DMA driver   jassi brar
• USB mass storage and ARM cache coherency   Sascha Hauer
• USB mass storage and ARM cache coherency   Russell King - ARM Linux
• USB mass storage and ARM cache coherency   Andy Green
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• USB mass storage and ARM cache coherency   Oliver Neukum
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• USB mass storage and ARM cache coherency   Oliver Neukum
• [PATCH 1/3] imxfb: add support for i.MX25   Baruch Siach
• [PATCH 2/3] mx25: add platform support for imxfb   Baruch Siach
• [PATCH 3/3] mx25pdk: add LCD support   Baruch Siach
• [PATCH 0/3] mx25: framebuffer support   Baruch Siach
• [PATCH 1/1] add mx3 cupid bsp   Carsten Behling
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• USB mass storage and ARM cache coherency   Jamie Lokier
• [PATCH 1/1] add mx3 cupid bsp   Daniel Mack
• [PATCH 1/1] add mx3 cupid bsp   Uwe Kleine-König
• [patch 00/12] arm: raw_spinlock annotations   Thomas Gleixner
• [patch 01/12] arm: Convert dma_spin_lock to raw_spinlock   Thomas Gleixner
• [patch 02/12] arm: Convert stop_lock to raw_spinlock   Thomas Gleixner
• [patch 03/12] arm-convert-die_lock-undef_lock-to-raw-spinlocks.patch   Thomas Gleixner
• [patch 04/12] arm: Convert l2x0_lock to raw_spinlock   Thomas Gleixner
• [patch 05/12] arm: Convert cpu_asid_lock to raw_spinlock   Thomas Gleixner
• [patch 06/12] arm: Convert xscale minicache_lock to raw_spinlock   Thomas Gleixner
• [patch 07/12] arm: Convert v4 minicache_lock to raw_spinlock   Thomas Gleixner
• [patch 08/12] arm: Convert v6_lock to raw_spinlock   Thomas Gleixner
• [patch 09/12] arm: Convert footbridge gpio and led locks to raw_spinlock   Thomas Gleixner
• [patch 10/12] arm: Convert integrator cm_lock and v3_lock to raw_spinlock   Thomas Gleixner
• [patch 11/12] arm: Convert ixp4xx pci_lock to raw_spinlock   Thomas Gleixner
• [patch 12/12] arm: Convert shark leds_lock to raw_spinlock   Thomas Gleixner
• [PATCH] ARM: oprofile: convert from sysdev to platform device   Aaro Koskinen
• [PATCH 1/1] add mx3 cupid bsp with added to uncompress.h and against mxc-master   Carsten Behling
• [PATCH 1/1] add mx3 cupid bsp with added to uncompress.h and against mxc-master   Uwe Kleine-König
• USB mass storage and ARM cache coherency   Catalin Marinas
• USB mass storage and ARM cache coherency   Catalin Marinas
• USB mass storage and ARM cache coherency   Catalin Marinas
• USB mass storage and ARM cache coherency   Catalin Marinas
• USB mass storage and ARM cache coherency   Catalin Marinas
• USB mass storage and ARM cache coherency   Catalin Marinas
• USB mass storage and ARM cache coherency   Catalin Marinas
• [PATCH] ARM: Fix build error for arm1026ej-s processor   Abdoulaye Walsimou Gaye
• [PATCH 1/2] add mx3 cupid bsp cleanup   Carsten Behling
• [PATCH 2/2] add mx3 cupid bsp cleanup   Carsten Behling
• USB mass storage and ARM cache coherency   Alan Stern
• [PATCH 1/2] add mx3 cupid bsp cleanup   Daniel Mack
• AT91SAM9263 USB Serial hang?   Timo TH
• [PATCH] spi_s3c24xx: Fix for SPI on S3C2412   José Miguel Gonçalves
• [PATCH 3/3] add mx3 cupid ac97 support   Carsten Behling
• [PATCH 1/2] add mx3 cupid bsp cleanup   Uwe Kleine-König
• [PATCH 1/3] ARM: SMDK6410: Add initial support for WM1192-EV1 PMIC board   Mark Brown
• [PATCH 2/3] ARM: S3C64XX: Add initial support for board specific IRQs   Mark Brown
• [PATCH 3/3] ARM: SMDK6410: Add support for PMIC LED on WM1192-EV1 PMIC module   Mark Brown
• PL-330 DMA driver   Linus Walleij
• [PATCH 1/2] ARM: S3C64XX: Declare IISv4 PCLK for S3C6410   Mark Brown
• [PATCH 2/2] ARM: SMDK6410: Register IISv4 device   Mark Brown
• [PATCH v2] omap: Remove DEBUGFS dependency for mux name checking   Tony Lindgren
• [PATCH] mx51_babbage: Fix ckih2 parameter in mx51_clocks_init function   Fabio Estevam
• USB mass storage and ARM cache coherency   Russell King - ARM Linux
• USB mass storage and ARM cache coherency   Gadiyar, Anand
• PL-330 DMA driver   Russell King - ARM Linux
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• USB mass storage and ARM cache coherency   Russell King - ARM Linux
• PL-330 DMA driver   Guennadi Liakhovetski
• PL-330 DMA driver   Linus Walleij
• PL-330 DMA driver   Linus Walleij
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• [PATCH 0/7] OMAP PM updates for 2.6.34   Kevin Hilman
• [PATCH 1/7] OMAP3: cpuidle: Update statistics for correct state   Kevin Hilman
• [PATCH 2/7] OMAP3: cpuidle: configure latencies/thresholds from board file   Kevin Hilman
• [PATCH 3/7] OMAP3: cpuidle: Add valid field into C-state parameter passing   Kevin Hilman
• [PATCH 4/7] OMAP3: RX-51: support sleep indicator LEDs   Kevin Hilman
• [PATCH 5/7] OMAP3: RX-51: Pass cpu idle parameters   Kevin Hilman
• [PATCH 6/7] OMAP3: PM: add scratchpad locking function   Kevin Hilman
• [PATCH 7/7] OMAP3: PM: Added support for L2 aux ctrl register save and restore   Kevin Hilman
• Alignment Requirement for MT_MEMORY type   Henry Li
• Kernel panic due to page migration accessing memory holes   Michael Bohan
• Kernel panic due to page migration accessing memory holes   KAMEZAWA Hiroyuki
• [PATCH 2/2] ARM: SMDK6410: Register IISv4 device   jassi brar
• PL-330 DMA driver   jassi brar
• [PATCH 00/23] omap updates for 2.6.34, part 3   Tony Lindgren
• [PATCH 00/23] Series short description   Tony Lindgren
• [PATCH 01/23] omap: zoom3: enable ehci support   Tony Lindgren
• [PATCH 02/23] omap3evm: Add mux settings for keypad   Tony Lindgren
• [PATCH 03/23] omap3evm: Fixes after moving to matrix_keypad   Tony Lindgren
• [PATCH 04/23] omap3evm: Configure GPIO175 for touchscreen PEN_IRQ   Tony Lindgren
• [PATCH 05/23] OMAP: pandora: add DSS2 support and related regulators   Tony Lindgren
• [PATCH 06/23] omap3: pandora: update regulator setup   Tony Lindgren
• [PATCH 07/23] omap3: pandora: update defconfig   Tony Lindgren
• [PATCH 08/23] omap3: Add platform data for the twl4030_codec MFD on IGEP v2   Tony Lindgren
• [PATCH 09/23] omap3: Fix typo on IGEP v2 board   Tony Lindgren
• [PATCH 10/23] omap3: Add platform init code for EHCI driver on IGEP v2   Tony Lindgren
• [PATCH 11/23] omap3: Enable DSS2 for IGEP v2 board   Tony Lindgren
• [PATCH 12/23] omap3: Add support for flash on IGEP v2 board   Tony Lindgren
• [PATCH 13/23] ARM: OMAP3: SDRC: add timing data for Numonyx M65KxxxxAM   Tony Lindgren
• [PATCH 14/23] omap3: Use timing data for omap2_init_common_hw on IGEP v2   Tony Lindgren
• [PATCH 15/23] omap3: Update defconfig for IGEP v2 to allow new drivers andfeatures   Tony Lindgren
• [PATCH 16/23] IGEPv2: Added WIFI support   Tony Lindgren
• [PATCH 17/23] IGEPv2: Use Red Led1 as Heartbeat if configured   Tony Lindgren
• [PATCH 18/23] AM3517: Enable basic I2C Support   Tony Lindgren
• [PATCH 19/23] AM3517: Enable RTC driver support for AM3517EVM   Tony Lindgren
• [PATCH 20/23] AM3517: Enable I2C-GPIO Expander driver support for AM3517EVM   Tony Lindgren
• [PATCH 21/23] Add minimal support for DevKit8000   Tony Lindgren
• [PATCH 22/23] Add devkit8000_defconfig   Tony Lindgren
• [PATCH 23/23] OMAP3EVM: PM: Update defconfig   Tony Lindgren
• [PATCH] ep93xx: include correct irq.h in core.c   Ryan Mallon
• race between kmap shootdown and cache maintenance   Arve Hjønnevåg
• [PATCH] ep93xx: move timer defines into core.c and document   Ryan Mallon
• race between kmap shootdown and cache maintenance   Nicolas Pitre
• [PATCH] pxamci: close a serious race   Vernon Sauder
• [PATCH 1/1] add mx3 cupid bsp   Carsten Behling
• PL-330 DMA driver   Dan Williams
• PL-330 DMA driver   jassi brar
• [PATCH 1/2] arm/pxa: Enable check_scoop_reg() only if CONFIG_PM is set.   Eric Miao
• [PATCH 2/2] arm/pxa: Let zeus.c link without CONFIG_PM enabled.   Eric Miao
• [PATCH] Mailbox: new mutext lock for h/w mailbox configuration   Hiroshi DOYU
• USB mass storage and ARM cache coherency   Oliver Neukum
• [PATCH v2 0/5] Mailbox: Fix some issues in mailbox module   Guzman Lugo, Fernando
• [PATCH] Mailbox: Fix some issues in mailbox module   Fernando Guzman Lugo
• [PATCH v2 1/5] Mailbox: free mailbox interrupt before freeing blk queue   Guzman Lugo, Fernando
• [PATCH v2 2/5] Mailbox: flush pending deferred works before freeing blk   Guzman Lugo, Fernando
• [PATCH v2 3/5] Mailbox: Check valid registered callback before calling   Guzman Lugo, Fernando
• [PATCH 1/1] add mx3 cupid bsp   Daniel Mack
• [PATCH v2 4/5] Mailbox: new mutext lock for h/w mailbox configuration   Guzman Lugo, Fernando
• [PATCH v2 5/5] Mailbox: disable mailbox interrupt when request queue   Guzman Lugo, Fernando
• USB mass storage and ARM cache coherency   Gadiyar, Anand
• [PATCH] mx51_babbage: Fix ckih2 parameter in mx51_clocks_init function   Sascha Hauer
• [PATCH] mx51_babbage: Fix ckih2 parameter in mx51_clocks_init function   Amit Kucheria
• Kernel panic due to page migration accessing memory holes   Michael Bohan
• Alignment Requirement for MT_MEMORY type   Russell King - ARM Linux
• [PATCH 0/9] omap4 updates for 2.6.34   Shilimkar, Santosh
• Kernel panic due to page migration accessing memory holes   Russell King - ARM Linux
• [PATCH 1/9] omap3/4: uart: fix full-fifo write abort   Santosh Shilimkar
• [PATCH 2/9] omap2/3/4: ioremap omap_globals module   Santosh Shilimkar
• [PATCH 3/9] omap4: sdma: Enable the idle modes on omap4   Santosh Shilimkar
• [PATCH 4/9] omap: sdma: Limit the secure reserve channel fix for omap3   Santosh Shilimkar
• [PATCH 5/9] omap4: Fix omap_type() for omap4   Santosh Shilimkar
• [PATCH 6/9] omap3/4: Remove overlapping mapping of L4_WKUP io space   Santosh Shilimkar
• [PATCH 7/9] omap4: Add auto-generated irq and dma headers   Santosh Shilimkar
• [PATCH 8/9] omap4: Use dma line defines from dma-44xx.h   Santosh Shilimkar
• [PATCH 9/9] omap4: Use irq line defines from irq-44xx.h   Santosh Shilimkar
• [PATCH 2/2] ARM: SMDK6410: Register IISv4 device   Mark Brown
• Kernel panic due to page migration accessing memory holes   KAMEZAWA Hiroyuki
• Kernel panic due to page migration accessing memory holes   Mel Gorman
• pull request for .34   Uwe Kleine-König
• pull request for .34   Russell King - ARM Linux
• PL-330 DMA driver   Russell King - ARM Linux
• [PATCH 7/9 v2] omap4: Add auto-generated irq and dma headers   Santosh Shilimkar
• pull request for .34   Uwe Kleine-König
• PL-330 DMA driver   Joonyoung Shim
• NDCBx registers in PXA3XX MTD driver   Romain Bornet
• NDCBx registers in PXA3XX MTD driver   Eric Miao
• NDCBx registers in PXA3XX MTD driver   Romain Bornet
• [PATCH] Add resources description for s3c24xx ts driver   Vasily Khoruzhick
• [PATCH 1/1] add mx3 cupid bsp   Carsten Behling
• [PATCH] Documentation: remove obsolete arm/Sharp-LH/LPD7A400 file   Bartlomiej Zolnierkiewicz
• [PATCH] Add resources description for s3c24xx ts driver   Vasily Khoruzhick
• [PATCH 1/1] add mx3 cupid bsp   Carsten Behling
• [PATCH 0/4] s3c24xx_ts driver fixes   Vasily Khoruzhick
• [PATCH 1/4] Add resources description for s3c24xx ts driver   Vasily Khoruzhick
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Vasily Khoruzhick
• [PATCH 3/4] s3c24xx_adc: disable/enable IRQ on suspend/resume   Vasily Khoruzhick
• [PATCH 4/4] s3c24xx_ts: re-enable IRQ on resume   Vasily Khoruzhick
• [PATCH 1/1] add mx3 cupid bsp   Russell King - ARM Linux
• [PATCH] ARM: Fix build error for arm1026ej-s processor   Russell King - ARM Linux
• [PATCH/RFC] arm: Enable backtrace printing on oops when PC iscorrupted   Russell King - ARM Linux
• [PATCH] Help fix SMP boot issues with L2 cache   Russell King - ARM Linux
• [PATCH 12/14] AMBA: CLCD: LPC32XX register swap in the clcd header file   Russell King - ARM Linux
• [PATCH 7/9] omap4: Add auto-generated irq and dma headers   Paul Walmsley
• [PATCH] Help fix SMP boot issues with L2 cache   Shilimkar, Santosh
• [PATCH 7/9] omap4: Add auto-generated irq and dma headers   Shilimkar, Santosh
• [PATCH 2/9] omap2/3/4: ioremap omap_globals module   Paul Walmsley
• [PATCH 0/9] omap4 updates for 2.6.34   Paul Walmsley
• [PATCH 0/9] omap4 updates for 2.6.34   Shilimkar, Santosh
• PL-330 DMA driver   Linus Walleij
• Alignment Requirement for MT_MEMORY type   Henry Li
• [PATCH 0/5] Zeus fixes for 2.6.34   Marc Zyngier
• [PATCH 1/5] pxa/zeus: Allow usage of 8250-compatible UART in uncompress   Marc Zyngier
• [PATCH 1/5] pxa/zeus: Allow usage of 8250-compatible UART in uncompress   Marc Zyngier
• [GIT PULL] omap fix for 2.6.33-rc8   Tony Lindgren
• [PATCH 2/5] Correct the USB host initialisation flags of Arcom/Eurotech Zeus SBC.   Marc Zyngier
• [PATCH 3/5] Add Eurotech as the manufacturer of the Zeus board   Marc Zyngier
• [PATCH 4/5] watchdog: add support for onboard max6369 to Arcom Zeus   Marc Zyngier
• [PATCH 5/5] pxa/zeus: Add support for mcp2515 CAN bus   Marc Zyngier
• [PATCH 1/5] pxa/zeus: Allow usage of 8250-compatible UART in uncompress   Marc Zyngier
• Compiler for Atmel AT91SAMG20   Andrew
• [GIT PULL] gemini fix for 2.6.33-rc8   Paulius Zaleckas
• [PATCH 1/2] Gemini: wrong registers used to set reg_level in gpio_set_irq_type()   Paulius Zaleckas
• [PATCH 2/2] MAINTAINERS: fix my e-mail and status for Gemini and FA526   Paulius Zaleckas
• [PATCH 2/9] omap2/3/4: ioremap omap_globals module   Kevin Hilman
• [PATCH 0/7] PrimeCell DMA Device   Linus Walleij
• [PATCH 1/7] ARM: MMCI: remove custom DBG macro and printk   Linus Walleij
• [PATCH 2/7] ARM: MMCI: pass max frequency from platform   Linus Walleij
• [PATCH 3/7] ARM: U300: set f_max to 24 MHz for MMCI   Linus Walleij
• [PATCH 4/7] ARM: MMCI: add DMA support using dmaengine   Linus Walleij
• [PATCH 5/7] ARM: U300: add MMCI DMA platform config   Linus Walleij
• [PATCH 6/7] fix COH 901 318 memcpy and slave issues   Linus Walleij
• [PATCH 7/7] DMAENGINE: add COH 901 318 AMBA/PrimeCell extension   Linus Walleij
• [PATCH] arm: Allow mounting root on omaps with CPU_V6 and CPU_V7   Tony Lindgren
• [PATCH 03/14] ARM: LPC32XX: Clock driver   Kevin Wells
• Kernel panic due to page migration accessing memory holes   Michael Bohan
• Kernel panic due to page migration accessing memory holes   KAMEZAWA Hiroyuki
• [Linux-arm-nuc900] Re: [PATCH]NUC900 add gpio virtual memory map   Wan ZongShun
• [Linux-arm-nuc900] Re: [PATCH]NUC900 add gpio virtual memory map   Qiang Wang
• [PATCH 7/9] omap4: Add auto-generated irq and dma headers   Shilimkar, Santosh
• [PATCH 2/9] omap2/3/4: ioremap omap_globals module   Shilimkar, Santosh
• [PATCH 1/9] omap3/4: uart: fix full-fifo write abort   Shilimkar, Santosh
• Kernel panic due to page migration accessing memory holes   Michael Bohan
• Kernel panic due to page migration accessing memory holes   KAMEZAWA Hiroyuki
• [PATCH 1/5] pxa/zeus: Allow usage of 8250-compatible UART in uncompress   Eric Miao
• [PATCH 1/5] pxa/zeus: Allow usage of 8250-compatible UART in uncompress   Marc Zyngier
• [PATCH 1/5] pxa/zeus: Allow usage of 8250-compatible UART in uncompress   Eric Miao
• What's cooked in 'devel' branch of pxa for next merge window   Eric Miao
• Kernel panic due to page migration accessing memory holes   KAMEZAWA Hiroyuki
• Kernel panic due to page migration accessing memory holes   Russell King - ARM Linux
• [PATCH] arm: Allow mounting root on omaps with CPU_V6 and CPU_V7   Russell King - ARM Linux
• Alignment Requirement for MT_MEMORY type   Linus Walleij
• [PATCH] ARM: fix documentation of the PrimeCell bus   Linus Walleij
• [PATCH 4/4] s3c24xx_ts: re-enable IRQ on resume   Dmitry Torokhov
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Dmitry Torokhov
• [PATCH 03/14] ARM: LPC32XX: Clock driver   Uwe Kleine-König
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Vasily Khoruzhick
• [PATCH 1/1] add mx3 cupid bsp   Daniel Mack
• What's cooked in 'devel' branch of pxa for next merge window   Holland, John
• What's cooked in 'devel' branch of pxa for next merge window   Eric Miao
• [PATCH] pxamci: close a serious race   Eric Miao
• Kernel panic due to page migration accessing memory holes   Mel Gorman
• Uncompressing broken with commit e7db7b4270   Uwe Kleine-König
• [PATCH 1/1] MX35: Add CUPID board support   Carsten Behling
• [PATCH 1/1] MX35: Add CUPID board support   Uwe Kleine-König
• Uncompressing broken with commit e7db7b4270   Catalin Marinas
• [PATCH] Help fix SMP boot issues with L2 cache   Catalin Marinas
• USB mass storage and ARM cache coherency   Catalin Marinas
• USB mass storage and ARM cache coherency   Catalin Marinas
• [PATCH] arm: Allow mounting root on omaps with CPU_V6 and CPU_V7   Tony Lindgren
• [PATCH] arm: Allow mounting root on omaps with CPU_V6 and CPU_V7   Russell King - ARM Linux
• [PATCH 0/7] Add basic ARM device tree support   Grant Likely
• [PATCH 1/7] arm-dt: Add ATAG_DEVTREE tag   Grant Likely
• [PATCH 2/7] arm-dt: Allow CONFIG_OF on ARM   Grant Likely
• [PATCH 3/7] arm-dt: add devictree node reference to dev_archdata   Grant Likely
• [PATCH 4/7] arm/devicetree: Reserve memory used by dtb blob   Grant Likely
• [PATCH 5/7] arm-dt: unflatten device tree   Grant Likely
• [RFC/PATCH 6/7] arm/devicetree: Allow .dtb to be carried in the zImage payload   Grant Likely
• [PATCH 7/7] arm/boot/hack: set uImage load address to 0x81000000   Grant Likely
• USB mass storage and ARM cache coherency   Oliver Neukum
• RFC patch set - kirkwood/sheeva - enable eSATA port   John Holland
• RFC patch set - kirkwood/sheeva - enable eSATA port   Nicolas Pitre
• [PATCH] 1/3 kirkwood/sheeva: basic board support   John Holland
• [PATCH] 2/3 kirkwood/sheeva: configure SoC SATA interface   John Holland
• [PATCH] 3/3 kirkwood/sheeva: correlate MPP to SD CD and SD WP   John Holland
• [PATCH RE-SEND-3] ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig   Kukjin Kim
• [PATCH RE-SEND-3] ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig   Tony Lindgren
• LPC32XX architecture files (updated v4)   wellsk40 at gmail.com
• [PATCH 01/13] ARM: LPC32XX: Initial architecture header files   wellsk40 at gmail.com
• [PATCH 02/13] ARM: LPC32XX: Debug and IRQ macros   wellsk40 at gmail.com
• [PATCH 03/13] ARM: LPC32XX: Clock driver   wellsk40 at gmail.com
• [PATCH 04/13] ARM: LPC32XX: GPIO, timer, and IRQ drivers   wellsk40 at gmail.com
• [PATCH 05/13] ARM: LPC32XX: System suspend support   wellsk40 at gmail.com
• [PATCH 06/13] ARM: LPC32XX: Serial support code   wellsk40 at gmail.com
• [PATCH 07/13] ARM: LPC32XX: Misc support functions   wellsk40 at gmail.com
• [PATCH 08/13] ARM: LPC32XX: Phytec 3250 platform support   wellsk40 at gmail.com
• [PATCH 09/13] ARM: LPC32XX: Arch config menu supoport and makefiles   wellsk40 at gmail.com
• [PATCH 10/13] ARM: LPC32XX: Default PHY3250 kernel config (ramdisk)   wellsk40 at gmail.com
• [PATCH 11/13] ARM: Add support for the LPC32XX arch   wellsk40 at gmail.com
• [PATCH 12/13] i2c: Add support for the LPC32XX arch   wellsk40 at gmail.com
• [PATCH 13/13] WATCHDOG: Add support for the LPC32XX arch   wellsk40 at gmail.com
• [PATCH 00/11] omap updates for 2.6.34, part 4   Tony Lindgren
• [PATCH 01/11] USB: Add empty functions in otg.h   Tony Lindgren
• [PATCH 02/11] omap: musb: Remove #ifdef from board-omap3evm.c   Tony Lindgren
• [PATCH 03/11] arm: omap: musb: ioremap only what's ours   Tony Lindgren
• [PATCH 04/11] omap: musb: Pass board specific data from board file   Tony Lindgren
• [PATCH 05/11] omap: musb: remove unused data   Tony Lindgren
• [PATCH 06/11] arm: omap: musb: we can use clk framework   Tony Lindgren
• [PATCH 07/11] omap: musb: remove unused soft_con field   Tony Lindgren
• [PATCH 08/11] omap: musb: remove unused dma data   Tony Lindgren
• [PATCH 09/11] omap: musb: remove unnecessary return   Tony Lindgren
• [PATCH 10/11] omap: musb: get rid of dyn_fifo   Tony Lindgren
• [PATCH 11/11] omap: musb: Add USB support to 4430 SDP board file   Tony Lindgren
• [PATCH 03/11] arm: omap: musb: ioremap only what's ours   Aguirre, Sergio
• [PATCH RE-SEND-3] ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig   Kukjin Kim
• [PATCH 03/11] arm: omap: musb: ioremap only what's ours   Tony Lindgren
• [PATCH RE-SEND-3] ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig   Tony Lindgren
• [PATCH 03/11] arm: omap: musb: ioremap only what's ours   Aguirre, Sergio
• [PATCH] pxamci: close a serious race   Vernon Sauder
• [PATCH 03/11] arm: omap: musb: ioremap only what's ours   Tony Lindgren
• USB mass storage and ARM cache coherency   Pete Zaitcev
• [PATCH 00/11] omap updates for 2.6.34, part 4   Shilimkar, Santosh
• [PATCH 0/3] MXC PCMCIA Support   Martin Fuzzey
• [PATCH 1/3] PCMCIA: Add soc_common support for banked SoC drivers.   Martin Fuzzey
• [PATCH 2/3] MXC: add pcmcia support   Martin Fuzzey
• [PATCH 3/3] PCMCIA: Add support for freescale MX2/3 SoCs   Martin Fuzzey
• [PATCH 0/3] MXC PCMCIA Support   Russell King - ARM Linux
• [PATCH 01/13] ARM: LPC32XX: Initial architecture header files   Uwe Kleine-König
• [PATCH 03/13] ARM: LPC32XX: Clock driver   Russell King - ARM Linux
• [PATCH 06/13] ARM: LPC32XX: Serial support code   Russell King - ARM Linux
• [PATCH 0/3] MXC PCMCIA Support   Martin Fuzzey
• [PATCH 01/13] ARM: LPC32XX: Initial architecture header files   Kevin Wells
• [PATCH 01/13] ARM: LPC32XX: Initial architecture header files   Kevin Wells
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Dmitry Torokhov
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Vasily Khoruzhick
• [PATCH 0/3] MXC PCMCIA Support   Dominik Brodowski
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Dmitry Torokhov
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Vasily Khoruzhick
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Dmitry Torokhov
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Vasily Khoruzhick
• [PATCH 1/1] fix i2c_msg.len not aligning with i2c_master_send   Jean Delvare
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Nelson Castillo
• [PATCH 3/7] ARM: U300: set f_max to 24 MHz for MMCI   Russell King - ARM Linux
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Vasily Khoruzhick
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Dmitry Torokhov
• [PATCH] Documentation: remove obsolete arm/Sharp-LH/LPD7A400 file   Russell King - ARM Linux
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Vasily Khoruzhick
• [PATCH 1/4] Add resources description for s3c24xx ts driver   Ben Dooks
• [PATCH 3/4] s3c24xx_adc: disable/enable IRQ on suspend/resume   Ben Dooks
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Dmitry Torokhov
• Interrupt registering for PIO problem in ATMEL chips   biswa.nayak at wipro.com
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Vasily Khoruzhick
• [PATCH 2/4] s3c24xx_ts: report touch only when stylus is down   Vasily Khoruzhick
• atmel-mci / at91_mci   Manuel Stahl
• pull request for .34   Uwe Kleine-König
• [PATCH][KS8695] Mark network interface as running on ifconfig up   Yegor Yefremov
• [PATCH] jffs2: fix memory leak if the sector was successfully erased   Ni at m
• [PATCH] jffs2: fix memory leak if the sector was successfully erased   Russell King - ARM Linux
• [PATCH] jffs2: fix memory leak if the sector was successfully erased   Daniel Mack
• [PATCH 1/1] MX35: Add CUPID board support   Carsten Behling
• [PATCH] ep93xx: fix broken build of clock.c   H Hartley Sweeten
• [PATCH] jffs2: fix memory leak if the sector was successfully erased   Michael Trimarchi
• [PATCH] jffs2: fix memory leak if the sector was successfully erased   niam
• [PATCH 02/10] ARM: ftrace: document mcount formats   Rabin Vincent
• [PATCH 00/10] ARM: ftrace: cleanups, Thumb-2, and dynamic ftrace   Rabin Vincent
• [PATCH 03/10] ftrace: allow building without frame pointers   Frederic Weisbecker
• [PATCH 01/10] ARM: ftrace: clean up mcount assembly indentation   Frederic Weisbecker
• [PATCH 1/1] MX35: Add CUPID i2c1 rtc and at24 support.   Carsten Behling
• [PATCH 02/10] ARM: ftrace: document mcount formats   Frederic Weisbecker
• [PATCH 04/10] ARM: ftrace: allow building without frame pointers   Frederic Weisbecker
• [PATCH 02/10] ARM: ftrace: document mcount formats   Uwe Kleine-König
• Interrupt registering for PIO problem in ATMEL chips   Andrew Victor
• [PATCH 3/7] ARM: U300: set f_max to 24 MHz for MMCI   Linus Walleij
• [PATCH 00/11] omap updates for 2.6.34, part 4   Tony Lindgren
• [PATCH 1/9] omap3/4: uart: fix full-fifo write abort   Tony Lindgren
• [PATCH 01/13] ARM: LPC32XX: Initial architecture header files   Kevin Wells
• Separate/external initramfs, ATAG's, kernel panics ... Oh My!   Brian Hutchinson
• [PATCH 8/9] omap4: Use dma line defines from dma-44xx.h   Tony Lindgren
• Separate/external initramfs, ATAG's, kernel panics ... Oh My!   Russell King - ARM Linux
• [PATCH 1/9] omap3/4: uart: fix full-fifo write abort   Tony Lindgren
• Separate/external initramfs, ATAG's, kernel panics ... Oh My!   Brian Hutchinson
• [PATCH 1/1] MX35: Add CUPID i2c1 rtc and at24 support.   Fabio Estevam
• [PATCH 00/11] OMAP clock/hwmod: final set of 2.6.34 patches   Paul Walmsley
• [PATCH 01/11] OMAP3: clock: add capability to change rate of dpll4_m5_ck_3630   Paul Walmsley
• [PATCH 02/11] OMAP clock: add omap_clk_get_by_name() for use by OMAP hwmod core code   Paul Walmsley
• [PATCH 03/11] OMAP hwmod: convert hwmod to use hardware clock names rather than clkdev dev+con   Paul Walmsley
• [PATCH 04/11] OMAP hwmod: convert header files with static allocations into C files   Paul Walmsley
• [PATCH 05/11] OMAP hwmod: add hwmod class support   Paul Walmsley
• [PATCH 06/11] OMAP clockdomain: if no autodeps exist, don't try to add or remove them   Paul Walmsley
• [PATCH 07/11] OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code   Paul Walmsley
• [PATCH 08/11] OMAP2+ clock: revise omap2_clk_{disable,enable}()   Paul Walmsley
• [PATCH 09/11] OMAP4: clock: Rename leaf clock nodes to end with a _ick or _fck   Paul Walmsley
• [PATCH 10/11] OMAP4: clock: Add dummy clock nodes for interface clocks   Paul Walmsley
• [PATCH 11/11] OMAP4: clock: Remove clock hacks from timer-gp.c   Paul Walmsley
• [PATCH 1/9] omap3/4: uart: fix full-fifo write abort   Shilimkar, Santosh
• Interrupt registering for PIO problem in ATMEL chips   Hemanth V
• QUERY: Inclusion of header files in kernel header files.   viresh kumar
• QUERY: Inclusion of header files in kernel header files.   viresh kumar
• [PATCH 1/9] omap3/4: uart: fix full-fifo write abort   Shilimkar, Santosh
• [PATCH 01/13] ARM: LPC32XX: Initial architecture header files   Uwe Kleine-König
• [PATCH 0/4] ux500: u8500 v1 revision, clock gating   Rabin Vincent
• [PATCH 1/4] ux500: fix CLKRST addresses   Rabin Vincent
• [PATCH 2/4] ux500: move system timer to cpu file   Rabin Vincent
• [PATCH 3/4] ux500: add support for u8500 v1 revision   Rabin Vincent
• [PATCH 4/4] ux500: support clock gating   Rabin Vincent
• [PATCH 4/4] ux500: support clock gating   Rabin VINCENT
• [PATCH 0/4] ARM mandatory barriers   Catalin Marinas
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Catalin Marinas
• [PATCH 2/4] ARM: Move the outer_cache definitions into a separate file   Catalin Marinas
• [PATCH 3/4] ARM: Add outer_cache_fns sync function and support for L2x0   Catalin Marinas
• [PATCH 4/4] ARM: Add RealView-specific barrier implementation   Catalin Marinas
• [PATCH] mx31ads: Configure SSI5 pins in IOMUX for PMIC module audio support   Mark Brown
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Russell King - ARM Linux
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Shilimkar, Santosh
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Russell King - ARM Linux
• [PATCH] ARM: U300: fix inverted clk round rate   Linus Walleij
• PL-330 DMA driver   Joonyoung Shim
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Catalin Marinas
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Catalin Marinas
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Russell King - ARM Linux
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Russell King - ARM Linux
• [PATCH 04/10] ARM: ftrace: allow building without frame pointers   Steven Rostedt
• [PATCH 07/10] ftrace: pass KBUILD_CFLAGS to record_mcount.pl   Steven Rostedt
• [PATCH 09/10] ARM: ftrace: add Thumb-2 support to dynamic ftrace   Steven Rostedt
• [PATCH] MPP routines and definitions for MV78XX0 arch   Sebastien Requiem
• [PATCH 03/10] ftrace: allow building without frame pointers   Steven Rostedt
• [PATCH 04/10] ARM: ftrace: allow building without frame pointers   Steven Rostedt
• [PATCH] Support for Buffalo WXL (Terastation Duo)   Sebastien Requiem
• [PATCH] Clean up ARM compressed loader   hector at marcansoft.com
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• sleeping clk_[enable,disable]?   Linus Walleij
• [PATCH 10/11] omap: musb: get rid of dyn_fifo   Thomas Weber
• [PATCH 10/11] omap: musb: get rid of dyn_fifo   Andreas Hartmetz
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Catalin Marinas
• [PATCH 10/11] omap: musb: get rid of dyn_fifo   Gadiyar, Anand
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Russell King - ARM Linux
• [PATCH] omap: McBSP: Drop unnecessary status/error bit clearing on reg_cacheretrieved register values   Janusz Krzysztofik
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Catalin Marinas
• [PATCH 1/9] omap3/4: uart: fix full-fifo write abort   Shilimkar, Santosh
• [PATCH 09/10] ARM: ftrace: add Thumb-2 support to dynamic ftrace   Rabin Vincent
• [PATCH 04/10] ARM: ftrace: allow building without frame pointers   Frederic Weisbecker
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Russell King - ARM Linux
• [PATCH 04/10] ARM: ftrace: allow building without frame pointers   Rabin Vincent
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Catalin Marinas
• [PATCH 04/10] ARM: ftrace: allow building without frame pointers   Steven Rostedt
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Russell King - ARM Linux
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Catalin Marinas
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Catalin Marinas
• [PATCH 07/10] ftrace: pass KBUILD_CFLAGS to record_mcount.pl   Rabin Vincent
• [RFC PATCH 05/12] arm: mm: retry on QSD icache parity errors   Daniel Walker
• [PATCH 07/10] ftrace: pass KBUILD_CFLAGS to record_mcount.pl   Steven Rostedt
• [PATCH 04/10] ARM: ftrace: allow building without frame pointers   Rabin Vincent
• [PATCH 1/9] omap3/4: uart: fix full-fifo write abort   Tony Lindgren
• [PATCH 10/11] omap: musb: get rid of dyn_fifo   Tony Lindgren
• [RFC PATCH 05/12] arm: mm: retry on QSD icache parity errors   Russell King - ARM Linux
• [RFC PATCH 05/12] arm: mm: retry on QSD icache parity errors   Daniel Walker
• [RFC PATCH 05/12] arm: mm: retry on QSD icache parity errors   Russell King - ARM Linux
• [PATCH 02/10] ARM: ftrace: document mcount formats   Rabin Vincent
• sleeping clk_[enable,disable]?   Rabin Vincent
• [PATCH] ep93xx: fix broken build of clock.c   Ryan Mallon
• [PATCH] ep93xx: move gpio interrupt support to gpio.c   H Hartley Sweeten
• [PATCH 02/10] ARM: ftrace: document mcount formats   Uwe Kleine-König
• [PATCH] ep93xx: move gpio interrupt support to gpio.c   Ryan Mallon
• [PATCH 03/13] ARM: LPC32XX: Clock driver   Kevin Wells
• sleeping clk_[enable,disable]?   Linus Walleij
• Re: [PATCH] MPP routines and definitions for MV78XX0 arch   Nicolas Pitre
• [PATCH] Support for Buffalo WXL (Terastation Duo)   Nicolas Pitre
• [PATCH 1/9] omap3/4: uart: fix full-fifo write abort   Tony Lindgren
• PL-330 DMA driver   Ben Dooks
• PL-330 DMA driver   Ben Dooks
• [PATCH] Clean up ARM compressed loader   Hector Martin
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• QUERY: Inclusion of header files in kernel header files.   Eric Miao
• [PATCH 1/9] omap3/4: uart: fix full-fifo write abort   Shilimkar, Santosh
• QUERY: Inclusion of header files in kernel header files.   viresh kumar
• [PATCH 00/11] OMAP clock/hwmod: final set of 2.6.34 patches   Shilimkar, Santosh
• USB mass storage and ARM cache coherency   Oliver Neukum
• [PATCH v5 1/8] ARM: S5PV210: Add Samsung S5PV210 CPU support   Kukjin Kim
• [PATCH v5 2/8] ARM: S5PV210: Add clock support for S5PV210   Kukjin Kim
• [PATCH v5 3/8] ARM: S5PV210: Add IRQ support   Kukjin Kim
• [PATCH v5 4/8] ARM: S5PV210: Update Kconfig and Makefiles   Kukjin Kim
• [PATCH v5 5/8] ARM: S5PV210: Add SMDKV210 board support file   Kukjin Kim
• [PATCH v5 6/8] ARM: S5PV210: Add SMDKC110 board support file   Kukjin Kim
• [PATCH v5 7/8] ARM: S5PV210: Add S5PV210 configuration file   Kukjin Kim
• [PATCH v5 8/8] ARM: S5PV210: Add S5PC110 configuration file   Kukjin Kim
• [PATCH v5 0/8] ARM: S5PV210: Add support for Samsung's S5PV210   Kukjin Kim
• large page support for IOP331   Prashant Bhole
• PL-330 DMA driver   Russell King - ARM Linux
• [PATCH] Clean up ARM compressed loader   Uwe Kleine-König
• sleeping clk_[enable,disable]?   Uwe Kleine-König
• [PATCH] Clean up ARM compressed loader   Uwe Kleine-König
• large page support for IOP331   Prashant Bhole
• large page support for IOP331   Russell King - ARM Linux
• [PATCH] Clean up ARM compressed loader   Hector Martin
• [PATCH] Clean up ARM compressed loader   Hector Martin
• [PATCH] mx31ads: Configure SSI5 pins in IOMUX for PMIC module audio support   Sascha Hauer
• [PATCH] mx25: move ARCH_MXC_IOMUX_V3 to the ARCH level   Baruch Siach
• large page support for IOP331   Prashant Bhole
• [PATCH] mx25: move ARCH_MXC_IOMUX_V3 to the ARCH level   Sascha Hauer
• [PATCH 00/39] more imx patches for 2.6.34   Uwe Kleine-König
• [PATCH 01/39] arm/mx2: use cpp magic to create spi_imx devices   Uwe Kleine-König
• [PATCH 02/39] arm/mx2: use cpp magic to create imx_gpt devices   Uwe Kleine-König
• [PATCH 03/39] arm/mx2: use cpp magic to create imx-i2c devices   Uwe Kleine-König
• [PATCH 04/39] arm/mx2: use cpp magic to create imx-mmc devices   Uwe Kleine-König
• [PATCH 05/39] arm/mx2: use cpp magic to create imx-ssi devices   Uwe Kleine-König
• [PATCH 06/39] arm/mx2/devices: use SoC-prefixed names where possible   Uwe Kleine-König
• [PATCH 07/39] arm/mx2: define seperate imx_nand devices for imx21 and imx27   Uwe Kleine-König
• [PATCH 08/39] arm/mx2: use per-SOC nand device   Uwe Kleine-König
• [PATCH 09/39] arm/mx2: define seperate gpio port descriptions for imx21 and imx27   Uwe Kleine-König
• [PATCH 10/39] arm/mx2/devices: no need for IMX_NEEDS_DEPRECATED_SYMBOLS any more   Uwe Kleine-König
• [PATCH 11/39] arm/mx2: split generic.c into mm-imx2[17].c   Uwe Kleine-König
• [PATCH 12/39] arm/imx/gpio: GPIO_INT_{HIGH, LOW}_LEV are not necessarily constant   Uwe Kleine-König
• [PATCH 13/39] arm/imx: use generic_handle_irq instead of open-coding it   Uwe Kleine-König
• [PATCH 14/39] arm/imx/gpio: use fls to find set bits in the irq status register   Uwe Kleine-König
• [PATCH 15/39] arm/imx/gpio: remove a BUG_ON in hot path   Uwe Kleine-König
• [PATCH 16/39] arm/imx/audmux-v1: use SoC-prefixed names   Uwe Kleine-König
• [PATCH 17/39] arm/imx/audmux-v2: use SoC-prefixed names   Uwe Kleine-König
• [PATCH 18/39] arm/imx: remove "NO_PAD_CTRL" from Copyright statements   Uwe Kleine-König
• [PATCH 19/39] arm/imx: let ARCH_MXC select COMMON_CLKDEV instead of each subfamily   Uwe Kleine-König
• [PATCH 20/39] arm/imx: don't explicitly select GENERIC_GPIO   Uwe Kleine-König
• [PATCH 21/39] arm/imx: remove MTD_XIP support   Uwe Kleine-König
• [PATCH 22/39] arm/imx: remove #ifndef CONFIG_COMMON_CLKDEV block   Uwe Kleine-König
• [PATCH 23/39] arm/imx: don't depend on ARCH_MXC twice   Uwe Kleine-König
• [PATCH 24/39] arm/imx/irq: order definitions of MXC_GPIO_IRQS numerically   Uwe Kleine-König
• [PATCH 25/39] arm/imx: choose sane CONSISTENT_DMA_SIZE if video is enabled for both mx1 and mx3   Uwe Kleine-König
• [PATCH 26/39] arm/imx/dma-v1: don't use deprecated symbols DMA_BASE and MXC_INT_DMACH0   Uwe Kleine-König
• [PATCH 27/39] arm/imx/dma-v1: protect #ifdef'd blocks additionally by cpu_is_...   Uwe Kleine-König
• [PATCH 28/39] arm/imx/iomux-v1: rename source file and reorganize Kconfig stuff   Uwe Kleine-König
• [PATCH 29/39] arm/imx/iomux-v1: make base address a runtime choice   Uwe Kleine-König
• [PATCH 30/39] arm/imx/iomux-mx1: unify style and comment cleanup   Uwe Kleine-König
• [PATCH 31/39] arm/imx/iomux-mx21: unify style   Uwe Kleine-König
• [PATCH 32/39] arm/imx/iomux-mx25: unify style and comment cleanup   Uwe Kleine-König
• [PATCH 33/39] arm/imx/iomux-mx27: unify style and comments   Uwe Kleine-König
• [PATCH 34/39] arm/imx/iomux-mx2x: unify style   Uwe Kleine-König
• [PATCH 35/39] arm/imx/iomux-mx3.h: unify style and comments   Uwe Kleine-König
• [PATCH 36/39] arm/mx25: don't include iomux.h which is for iomux-v1 machines   Uwe Kleine-König
• [PATCH 37/39] arm/imx/iomux-v1: rename header file   Uwe Kleine-König
• [PATCH 38/39] arm/imx: let platform files include the SoC-specific iomux header   Uwe Kleine-König
• [PATCH 39/39] arm/imx/iomux-v1: check for invalid modes in mxc_gpio_mode   Uwe Kleine-König
• [PATCH 1/3] gpiolib: make names array and its values const   Uwe Kleine-König
• my i2c-patches for 2.6.34   Uwe Kleine-König
• [PATCH 1/3] i2c/pxa: remove unused macro   Uwe Kleine-König
• [PATCH 2/3] i2c/pxa: only define 'blue_murder'-function if DEBUG is #defined   Uwe Kleine-König
• [PATCH 3/3] MAINTAINERS: add i2c tree for embedded platforms   Uwe Kleine-König
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• New s3c2442 machine   Vasily Khoruzhick
• New s3c2442 machine   Mark Brown
• New s3c2442 machine   Vasily Khoruzhick
• New s3c2442 machine   Ben Dooks
• [PATCH 3/7] ARM: U300: set f_max to 24 MHz for MMCI   Russell King - ARM Linux
• QUERY: Inclusion of header files in kernel header files.   Laurent Pinchart
• [PATCH 3/7] ARM: U300: set f_max to 24 MHz for MMCI   Linus Walleij
• [PATCH 3/7] ARM: U300: set f_max to 24 MHz for MMCI   Russell King - ARM Linux
• [PATCH] Clean up ARM compressed loader   Hector Martin
• [PATCH] Clean up ARM compressed loader   Uwe Kleine-König
• USB mass storage and ARM cache coherency   Alan Stern
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• [PATCH] ARM: S3C64XX: Add initial support for board specific IRQs   Mark Brown
• Boot up & soft reboot Problems enabling & disabling MMU Discontiguous Memory   Ricardo Martínez
• [PATCH] ARM: pxa/raumfeld: set GPIO drive bits for LED pins   Daniel Mack
• Git pull request: more Kirkwood/MV78xx0 stuff   Nicolas Pitre
• [GIT PULL] Second set of OMAP clock/hwmod patches for 2.6.34   Paul Walmsley
• Fwd: [PATCH] Bugfixing and improvement of the AT91 MCI driver   Andrew Victor
• [GIT PULL] Second set of OMAP clock/hwmod patches for 2.6.34   Tony Lindgren
• AC97 audio broken on SAM9263EK?   Bill Gatliff
• [GIT PULL] Second set of OMAP clock/hwmod patches for 2.6.34   Paul Walmsley
• [PATCH 3/7] ARM: U300: set f_max to 24 MHz for MMCI   Linus Walleij
• [GIT PULL] Second set of OMAP clock/hwmod patches for 2.6.34   Paul Walmsley
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• [PATCH 3/7] ARM: U300: set f_max to 24 MHz for MMCI   Linus Walleij
• [PATCH] ARM: MMCI: support 8bit mode on the ST Micro version   Linus Walleij
• USB mass storage and ARM cache coherency   Alan Stern
• [PATCH] Clean up ARM compressed loader   Hector Martin
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• [PATCH] ARM: MMCI: support 8bit mode on the ST Micro version   Russell King - ARM Linux
• [PATCH] MXC: mach_armadillo5x0: Add USB Host support.   Alberto Panizzo
• [PATCH] Clean up ARM compressed loader   Nicolas Pitre
• [GIT PULL v2] Second set of OMAP clock/hwmod patches for 2.6.34 (rebased)   Paul Walmsley
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• [PATCH] Clean up ARM compressed loader   Hector Martin
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• [PATCH] Clean up ARM compressed loader   Hector Martin
• [PULL] Pull request for for-rmk/samsung5   Ben Dooks
• [PATCH] Clean up ARM compressed loader   Hector Martin
• [PATCH] mx31pdk: Add NAND support   Fabio Estevam
• [GIT PULL] pxa: patches for next merge window   Eric Miao
• USB mass storage and ARM cache coherency   Oliver Neukum
• [PATCH] Clean up ARM compressed loader   Nicolas Pitre
• [PATCH] Clean up ARM compressed loader   Nicolas Pitre
• [PATCH] Clean up ARM compressed loader   Nicolas Pitre
• Fwd: [PATCH] Bugfixing and improvement of the AT91 MCI driver   Wolfgang Mües
• [PATCH] MXC: mach_armadillo5x0: Add USB Host support.   Uwe Kleine-König
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• [PATCH] MXC: mach_armadillo5x0: Add USB Host support.   Alberto Panizzo
• [PATCH] Bugfixing and improvement of the AT91 MCI driver   Nicolas Ferre
• [PATCH] MXC: mach_armadillo5x0: Add USB Host support.   Uwe Kleine-König
• No subject   Thomas Weber
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• [RESEND][PATCH/RFC] OMAP2: serial.c: Fix number of uarts in early_init   Thomas Weber
• [PATCH v2] MXC: mach_armadillo5x0: Add USB Host support.   Alberto Panizzo
• [PATCH] Clean up ARM compressed loader   Hector Martin
• [PATCH] Clean up ARM compressed loader   Hector Martin
• [PATCH v2] MXC: mach_armadillo5x0: Add USB Host support.   Uwe Kleine-König
• AC97 audio broken on SAM9263EK?   Sedji Gaouaou
• [PATCH v2] MXC: mach_armadillo5x0: Add USB Host support.   Alberto Panizzo
• [PATCH v3] MXC: mach_armadillo5x0: Add USB Host support.   Alberto Panizzo
• [PATCH] mx31pdk: Add NAND support   Alberto Panizzo
• [PATCH] mx31pdk: Add NAND support   Alberto Panizzo
• Boot up & soft reboot Problems enabling & disabling MMU Discontiguous Memory   Ricardo Mart�nez
• [PATCH] ARM: perf-events: request PMU interrupts with IRQF_NOBALANCING   Will Deacon
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• [PATCH] ARM: perf-events: request PMU interrupts with IRQF_NOBALANCING   Jamie Iles
• ARM 2.6.30.9 OOPS question -- stack limit?   Foster_Brian at emc.com
• USB mass storage and ARM cache coherency   James Bottomley
• AC97 audio broken on SAM9263EK?   Bill Gatliff
• ARM 2.6.30.9 OOPS question -- stack limit?   Russell King - ARM Linux
• Linux kernel crash dumps for ARM   Ofer Heifetz
• QUERY: How to call board specific initialization function before map_io or timer_init   viresh kumar
• ARM 2.6.30.9 OOPS question -- stack limit?   Foster_Brian at emc.com
• [PATCH1/5] at91_mci: fix pointer errors   Wolfgang Mües
• MXC Pull request   Sascha Hauer
• [PATCH2/5] at91_mci: fix timeout errors   Wolfgang Mües
• [PATCH3/5] at91_mci: use coherent DMA buffer   Wolfgang Mües
• [PATCH4/5] at91_mci: use DMA buffer for read   Wolfgang Mües
• [PATCH5/5] at91_mci: enable large data blocks   Wolfgang Mües
• [PATCH] Bugfixing and improvement of the AT91 MCI driver   Wolfgang Mües
• Soft Lockup Debugging   Aric D. Blumer
• External initramfs again ... keep getting "overlaps in-use memory region"   Brian Hutchinson
• [PATCH] arm: Fix .gitignore for boot/compressed folder   Sergio Aguirre
• QUERY: How to call board specific initialization function before map_io or timer_init   Ben Dooks
• [PATCH 4/4] video: add driver for PXA3xx 2D graphics accelerator   Daniel Mack
• External initramfs again ... keep getting "overlaps in-use memory region"   Brian Hutchinson
• AC97 audio broken on SAM9263EK?   Sedji Gaouaou
• [PATCH] ARM: SAMSUNG: Fix s3c hsotg driver compilation   Maurus Cuelenaere
• [PATCH] ARM: perf-events: fix v7 event selection mask   Will Deacon
• [PATCH] Clean up ARM compressed loader   Nicolas Pitre
• [PATCH] Clean up ARM compressed loader   Nicolas Pitre
• [RESEND][PATCH/RFC] OMAP2: serial.c: Fix number of uarts in early_init   Tony Lindgren
• [RESEND][PATCH/RFC] OMAP2: serial.c: Fix number of uarts in early_init   Shilimkar, Santosh
• [PATCH 0/6] ARM: oprofile: use perf-events framework as backend   Will Deacon
• [PATCH 1/6] ARM: perf-events: add Realview PMU IRQs to pmu.c   Will Deacon
• [PATCH 2/6] ARM: perf-events: use numeric ID to identify PMU   Will Deacon
• [PATCH 3/6] ARM: perf-events: add support for xscale PMUs   Will Deacon
• [PATCH 4/6] perf-events: export enable/disable event symbols to kernel modules   Will Deacon
• [PATCH 5/6] ARM: oprofile: use perf-events framework as backend   Will Deacon
• [PATCH 6/6] ARM: oprofile: remove old files and update KConfig   Will Deacon
• [RESEND][PATCH/RFC] OMAP2: serial.c: Fix number of uarts in early_init   Tony Lindgren
• [RESEND][PATCH/RFC] OMAP2: serial.c: Fix number of uarts in early_init   Shilimkar, Santosh
• External initramfs again ... keep getting "overlaps in-use memory region"   Russell King - ARM Linux
• [PATCH] Clean up ARM compressed loader   Hector Martin
• [PATCH] Clean up ARM compressed loader   Nicolas Pitre
• [PATCH] staging/dream: add missing include files/fix compilation   Pavel Machek
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• [PATCH] staging/dream: add missing include files/fix compilation   Daniel Walker
• [PATCH] Clean up ARM compressed loader   Nicolas Pitre
• [PATCH] staging/dream: add missing include files/fix compilation   Pavel Machek
• [PATCH] staging/dream: add missing include files/fix compilation   Daniel Walker
• [PATCH] Clean up ARM compressed loader   Hector Martin
• [PATCH] Clean up ARM compressed loader   Nicolas Pitre
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• [GIT PULL] pxa: patches for next merge window   Russell King - ARM Linux
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• [PULL] Pull request for for-rmk/samsung5   Russell King - ARM Linux
• MXC Pull request   Russell King - ARM Linux
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• External initramfs again ... keep getting "overlaps in-use memory region"   Brian Hutchinson
• [PATCH] Clean up ARM compressed loader   Nicolas Pitre
• [GIT PULL] pxa: patches for next merge window   Russell King - ARM Linux
• Soft Lockup Debugging   Russell King - ARM Linux
• External initramfs again ... keep getting "overlaps in-use memory region"   Russell King - ARM Linux
• [PATCH v2] MXC: mach_armadillo5x0: Add USB Host support.   Russell King - ARM Linux
• [PATCH] mx31pdk: Add NAND support   Fabio Estevam
• [PATCH] mx31pdk: Add NAND support   Fabio Estevam
• [PATCH] mx31pdk: Add NAND support   Alberto Panizzo
• [PATCH] mx31pdk: Add NAND support   Fabio Estevam
• [GIT PULL] Second set of OMAP clock/hwmod patches for 2.6.34   Tony Lindgren
• [PATCH] mx31pdk: Add NAND support   Alberto Panizzo
• [PATCH] mx31pdk: Add NAND support   Fabio Estevam
• [PATCH 0/6] omap i2c init fix and trivial board changes for 2.6.34   Tony Lindgren
• [PATCH 1/6] omap: i2c: Fix muxing for command line enabled bus   Tony Lindgren
• [PATCH 2/6] Zoom3: Defconfig update   Tony Lindgren
• [PATCH 3/6] AM35x: Add missing GPIO mux config for EHCI port   Tony Lindgren
• [PATCH 4/6] AM35x: Enable OMAP_MUX in defconfig   Tony Lindgren
• [PATCH 5/6] AM3517 EVM: Enable I2C support   Tony Lindgren
• [PATCH 6/6] AM3517EVM : correct typo - tca6416 mispelt as tca6516   Tony Lindgren
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• [PATCH] Clean up ARM compressed loader   Russell King - ARM Linux
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• [PATCH resend] s3cmci: Initialize default platform data no_wprotect and no_detect with 1   Lars-Peter Clausen
• [PATCH resend] s3cmci: s3cmci_card_present: Use no_detect to decide whether there is a card detect pin   Lars-Peter Clausen
• [GIT PULL] pxa: patches for next merge window   Eric Miao
• QUERY: How to call board specific initialization function before map_io or timer_init   viresh kumar
• Query about arm Dcache/Icache ?   rocky
• [GIT PULL] genesis updates for 2.6.34-rc1   Paul Mundt
• [PATCH 4/6] perf-events: export enable/disable event symbols to kernel modules   Ingo Molnar
• [GIT PULL] pxa: patches for next merge window   Eric Miao
• [PATCH 0/6] ARM: oprofile: use perf-events framework as backend   Jean Pihet
• [PATCH 2/6] ARM: perf-events: use numeric ID to identify PMU   Jean Pihet
• [PATCH][KS8695] Mark network interface as running on ifconfig up   David Miller
• [PATCH 5/6] ARM: oprofile: use perf-events framework as backend   Jean Pihet
• [PATCH] ARM: perf-events: fix v7 event selection mask   Jean Pihet
• [PATCH] mx31pdk: Add NAND support   Uwe Kleine-König
• [PATCH 4/6] perf-events: export enable/disable event symbols to kernel modules   Will Deacon
• [PATCH] mx31pdk: Add NAND support   Juergen Beisert
• [PATCH 5/6] ARM: oprofile: use perf-events framework as backend   Will Deacon
• [PATCH] mx31pdk: Add NAND support   Alberto Panizzo
• [PATCH 5/6] ARM: oprofile: use perf-events framework as backend   Jean Pihet
• [PATCH] mx31pdk: Add NAND support   Alberto Panizzo
• [PATCH] mx31pdk: Add NAND support   Uwe Kleine-König
• [PATCH] mx31pdk: Add NAND support   Alberto Panizzo
• [PATCH 2/6] ARM: perf-events: use numeric ID to identify PMU   Will Deacon
• [RESEND PATCH] ARM: oprofile: convert from sysdev to platform device   Aaro Koskinen
• [PATCH] mx31pdk: Add NAND support   Juergen Beisert
• Soft Lockup Debugging   Aric D. Blumer
• [PATCH] mx31pdk: Add NAND support   Ivo Clarysse
• [PATCH] mx31pdk: Add NAND support   Alberto Panizzo
• [PATCH] mx31pdk: Add NAND support   Juergen Beisert
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Catalin Marinas
• USB mass storage and ARM cache coherency   Catalin Marinas
• [PULL] Pull request for for-rmk/samsung5   Ben Dooks
• USB mass storage and ARM cache coherency   Catalin Marinas
• USB mass storage and ARM cache coherency   Catalin Marinas
• USB mass storage and ARM cache coherency   Alan Stern
• [PATCH v4] MXC: mach_armadillo5x0: Add USB Host support.   Alberto Panizzo
• [PATCH 1/7] mmc: at91_mci: fix pointer errors   Nicolas Ferre
• [PATCH 2/7] mmc: at91_mci: fix timeout errors   Nicolas Ferre
• [PATCH 3/7] mmc: at91_mci: use one coherent DMA buffer   Nicolas Ferre
• [PATCH 4/7] mmc: at91_mci: use DMA buffer for read   Nicolas Ferre
• [PATCH 5/7] mmc: at91_mci: enable large data blocks   Nicolas Ferre
• [PATCH 6/7] mmc: at91_mci: Enable MMC_CAP_SDIO_IRQ only when it actually works.   Nicolas Ferre
• [PATCH 7/7] mmc: at91_mci: introduce per-mci-revision conditional code   Nicolas Ferre
• [PULL] Pull request for for-rmk/samsung5   Russell King - ARM Linux
• [RESEND PATCH] ARM: oprofile: convert from sysdev to platform device   Russell King - ARM Linux
• [PATCH 1/7] mmc: at91_mci: fix pointer errors   Dan Carpenter
• USB mass storage and ARM cache coherency   Russell King - ARM Linux
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• External initramfs again ... keep getting "overlaps in-use memory region" - [SOLVED!]   Brian Hutchinson
• USB mass storage and ARM cache coherency   Russell King - ARM Linux
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• USB mass storage and ARM cache coherency   Russell King - ARM Linux
• [PATCH 7/6] omap2: Initialize Menelaus and MMC for N8X0   Tony Lindgren
• LPC32XX architecture files (updated v5)   wellsk40 at gmail.com
• [PATCH 01/13] ARM: LPC32XX: Initial arch header files   wellsk40 at gmail.com
• [PATCH 02/13] ARM: LPC32XX: Debug and IRQ macros   wellsk40 at gmail.com
• [PATCH 03/13] ARM: LPC32XX: Clock driver   wellsk40 at gmail.com
• [PATCH 04/13] ARM: LPC32XX: GPIO, timer, and IRQ drivers   wellsk40 at gmail.com
• [PATCH 05/13] ARM: LPC32XX: System suspend support   wellsk40 at gmail.com
• [PATCH 06/13] RM: LPC32XX: Serial support code   wellsk40 at gmail.com
• [PATCH 07/13] ARM: LPC32XX: Misc support functions   wellsk40 at gmail.com
• [PATCH 08/13] ARM: LPC32XX: Phytec 3250 platform support   wellsk40 at gmail.com
• [PATCH 09/13] ARM: LPC32XX: Arch config menu supoport and makefiles   wellsk40 at gmail.com
• [PATCH 10/13] ARM: LPC32XX: Default PHY3250 kernel config (ramdisk)   wellsk40 at gmail.com
• [PATCH 11/13] ARM: Add support for the LPC32XX arch   wellsk40 at gmail.com
• [PATCH 12/13] i2c: Add support for the LPC32XX arch   wellsk40 at gmail.com
• [PATCH 13/13] WATCHDOG: Add support for the LPC32XX arch   wellsk40 at gmail.com
• [PATCH] mx31pdk: Add NAND support   Fabio Estevam
• SMP performance question(Re: USB mass storage and ARM cache coherency)   Lin Mac
• [PATCH] CLKDEV: remove extra clk_find iterations   Viresh KUMAR
• [PATCH] ARM: includecheck fix for mach-at91/board-sam9m10g45ek.c   Jaswinder Singh Rajput
• [PATCH] mx31pdk: Add NAND support   Alberto Panizzo
• [PATCH] mx31pdk: Add NAND support   Fabio Estevam
• [PATCH] mx31pdk: Add NAND support   Alberto Panizzo
• [RFC] mx3fb: introduce waveform configuration for Pixel Clock signal.   Alberto Panizzo
• [PATCH 08/66] arch/arm/mach-sa1100/include/mach/timex.h: Checkpatch cleanup   Andrea Gelmini
• [PATCH 57/66] arch/arm/plat-omap/include/plat/blizzard.h: Checkpatch cleanup   Andrea Gelmini
• arch/arm broken in next   Uwe Kleine-König
• [PATCH 04/13] ARM: LPC32XX: GPIO, timer, and IRQ drivers   Uwe Kleine-König
• arch/arm broken in next   Stephen Rothwell
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• USB mass storage and ARM cache coherency   Benjamin Herrenschmidt
• AC97 audio broken on SAM9263EK?   Bill Gatliff
• USB mass storage and ARM cache coherency   James Bottomley
• arch/arm broken in next   Uwe Kleine-König
• [RFC PATCH v2 0/9] wii: add usb 2.0 support   Albert Herranz
• [RFC PATCH v2 1/9] powerpc: add per-device dma coherent support   Albert Herranz
• [RFC PATCH v2 2/9] wii: have generic dma coherent   Albert Herranz
• [RFC PATCH v2 3/9] dma-coherent: fix bitmap access races   Albert Herranz
• [RFC PATCH v2 4/9] add generic dmabounce support   Albert Herranz
• [RFC PATCH v2 5/9] arm: use generic dmabounce support   Albert Herranz
• [RFC PATCH v2 6/9] powerpc: add optional per-device dmabounce support   Albert Herranz
• [RFC PATCH v2 7/9] wii: add mem2 dma mapping ops   Albert Herranz
• [RFC PATCH v2 8/9] USB: add HCD_NO_COHERENT_MEM host controller driver flag   Albert Herranz
• [RFC PATCH v2 9/9] wii: hollywood ehci controller support   Albert Herranz
• [RFC PATCH v2 4/9] add generic dmabounce support   Russell King - ARM Linux
• [PATCH 2/3] i2c/pxa: only define 'blue_murder'-function if DEBUG is #defined   Russell King - ARM Linux
• [PATCH 3/3] MAINTAINERS: add i2c tree for embedded platforms   Russell King - ARM Linux
• [PATCH] CLKDEV: remove extra clk_find iterations   Ben Dooks
• [PULL] Pull request for for-rmk/samsung5   Ben Dooks
• [GIT PULL] pxa: patches for next merge window   Russell King - ARM Linux
• [RFC PATCH v2 4/9] add generic dmabounce support   Albert Herranz
• USB mass storage and ARM cache coherency   Pavel Machek
• SMP performance question(Re: USB mass storage and ARM cache coherency)   Catalin Marinas
• USB mass storage and ARM cache coherency   Catalin Marinas
• [PATCH] ARM: s3c2440: mini2440: remove improper __initdata in struct s3c2410fb_display   Abdoulaye Walsimou Gaye
• USB mass storage and ARM cache coherency   Catalin Marinas
• [GIT PULL] pxa: patches for next merge window   Nicolas Pitre
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Jamie Lokier
• [PATCH 1/4] ARM: Change the mandatory barriers implementation   Jamie Lokier
• [PATCH] iop-adma: redundant/wrong tests in iop_*_count()?   Dan Williams
• [PATCH 6/7] fix COH 901 318 memcpy and slave issues   Dan Williams

Last message date: Sun Feb 28 23:36:33 EST 2010
Archived on: Wed Apr 21 15:23:59 EDT 2010

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...