[PATCH 06/13] ARM: LPC32XX: Serial support code
wellsk40 at gmail.com
wellsk40 at gmail.com
Fri Feb 19 18:26:02 EST 2010
From: Kevin Wells <wellsk40 at gmail.com>
Serial port setup support code
Signed-off-by: Kevin Wells <wellsk40 at gmail.com>
---
arch/arm/mach-lpc32xx/serial.c | 191 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 191 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
new file mode 100644
index 0000000..680a79b
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -0,0 +1,191 @@
+/*
+ * arch/arm/mach-lpc32xx/serial.c
+ *
+ * Author: Kevin Wells <kevin.wells at nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/io.h>
+#include "common.h"
+
+#define LPC32XX_SUART_FIFO_SIZE 64
+
+/* Standard 8250/16550 compatible serial ports */
+static struct plat_serial8250_port serial_std_platform_data[] = {
+#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
+ {
+ .membase = io_p2v(LPC32XX_UART5_BASE),
+ .mapbase = LPC32XX_UART5_BASE,
+ .irq = IRQ_LPC32XX_UART_IIR5,
+ .uartclk = LPC32XX_MAIN_OSC_FREQ,
+ .regshift = 2,
+ .iotype = UPIO_MEM32,
+ .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+ UPF_SKIP_TEST,
+ },
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
+ {
+ .membase = io_p2v(LPC32XX_UART3_BASE),
+ .mapbase = LPC32XX_UART3_BASE,
+ .irq = IRQ_LPC32XX_UART_IIR3,
+ .uartclk = LPC32XX_MAIN_OSC_FREQ,
+ .regshift = 2,
+ .iotype = UPIO_MEM32,
+ .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+ UPF_SKIP_TEST,
+ },
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
+ {
+ .membase = io_p2v(LPC32XX_UART4_BASE),
+ .mapbase = LPC32XX_UART4_BASE,
+ .irq = IRQ_LPC32XX_UART_IIR4,
+ .uartclk = LPC32XX_MAIN_OSC_FREQ,
+ .regshift = 2,
+ .iotype = UPIO_MEM32,
+ .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+ UPF_SKIP_TEST,
+ },
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
+ {
+ .membase = io_p2v(LPC32XX_UART6_BASE),
+ .mapbase = LPC32XX_UART6_BASE,
+ .irq = IRQ_LPC32XX_UART_IIR6,
+ .uartclk = LPC32XX_MAIN_OSC_FREQ,
+ .regshift = 2,
+ .iotype = UPIO_MEM32,
+ .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+ UPF_SKIP_TEST,
+ },
+#endif
+ { },
+};
+
+struct uartinit {
+ char *uart_ck_name;
+ u32 ck_mode_mask;
+ void __iomem *pdiv_clk_reg;
+};
+
+static struct uartinit uartinit_data[] __initdata = {
+#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
+ {
+ .uart_ck_name = "uart5_ck",
+ .ck_mode_mask =
+ LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
+ .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+ },
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
+ {
+ .uart_ck_name = "uart3_ck",
+ .ck_mode_mask =
+ LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
+ .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+ },
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
+ {
+ .uart_ck_name = "uart4_ck",
+ .ck_mode_mask =
+ LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
+ .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+ },
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
+ {
+ .uart_ck_name = "uart6_ck",
+ .ck_mode_mask =
+ LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
+ .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+ },
+#endif
+};
+
+static struct platform_device serial_std_platform_device = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = serial_std_platform_data,
+ },
+};
+
+static struct platform_device *lpc32xx_serial_devs[] __initdata = {
+ &serial_std_platform_device,
+};
+
+void __init lpc32xx_serial_init(void)
+{
+ u32 tmp, clkmodes = 0;
+ struct clk *clk;
+ unsigned int puart;
+ int i, j;
+
+ /* UART clocks are off, let clock driver manage them */
+ __raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL);
+
+ for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
+ clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
+ if (!IS_ERR(clk)) {
+ clk_enable(clk);
+ serial_std_platform_data[i].uartclk =
+ clk_get_rate(clk);
+ }
+
+ /* Fall back on main osc rate if clock rate return fails */
+ if (serial_std_platform_data[i].uartclk == 0)
+ serial_std_platform_data[i].uartclk =
+ LPC32XX_MAIN_OSC_FREQ;
+
+ /* Setup UART clock modes for all UARTs, disable autoclock */
+ clkmodes |= uartinit_data[i].ck_mode_mask;
+
+ /* pre-UART clock divider set to 1 */
+ __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+ }
+
+ /* This needs to be done after all UART clocks are setup */
+ __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
+ for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+ /* Force a flush of the RX FIFOs to work around a HW bug */
+ puart = serial_std_platform_data[i].mapbase;
+ __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+ __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+ j = LPC32XX_SUART_FIFO_SIZE;
+ while (j--)
+ tmp = __raw_readl(LPC32XX_UART_DLL_FIFO(puart));
+ __raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
+ }
+
+ /* Disable UART5->USB transparent mode or USB won't work */
+ tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
+ tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB;
+ __raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
+
+ platform_add_devices(lpc32xx_serial_devs,
+ ARRAY_SIZE(lpc32xx_serial_devs));
+}
--
1.6.6
More information about the linux-arm-kernel
mailing list