[PATCHv3 0/7] Initial Freescale i.MX51 SoC support

[Amit Kucheria]

(patchset rebased on top of Sascha's tree and trivial fixes made)
git://git.pengutronix.de/git/imx/linux-2.6.git mxc-master

Will you consider merging it now?

Regards,
Amit

This series of patches adds basic support for i.MX5 family to the kernel. This
is just the bare minimum that brings up the board - sets up the clocks, IO
with a serial port and timers.

Features:

  * Console: Serial console using pre-existing drivers/serial/imx.c
  * Timer: Timer provided through arch/arm/plat-mxc/time.c
  * Interrupts: New interrupt controller through arch/arm/plat-mxc/tzic.c
  * Clocks: Minimal Clock framework to allow board boot up
  * Defconfigs: mx51_defconfig provided

Tested on a i.MX51-based Babbage 2.5 board.

Git:

repo: git://kernel.ubuntu.com/amitk/mx51-upstream.git mx51-baseport

Story:

This is a result of dropping a lot of functionality from the existing
Freescale codebase that is shipping as part of the Ubuntu ARM enablement. A
lot of the code was refactored to use facilities that were already available
upstream in arch/arm/plat-mxc/. The hope is to get this base port into
mainline and then start working on mainlining the drivers.

Changelog:

V1: Initial submission of base port

V2: - Split core code enabling i.MX51 and the babbage board
    - Refactor timer code to use version 1 or 2 of timer (patch by Sascha)
    - Fixes from review of V1

V3: - Fixes from review of V2
    - Merge the Driver Strength patch into the Core i.MX5 support
    - Moved the fec patches out of this series into its own
    - Merge the Kconfig/Makefiles into Babbage board support

Amit Kucheria (6):
  mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 family
  mxc: changes to common plat-mxc code to add support for i.MX5
  mxc: Core support for Freescale i.MX5 series
  mxc: Add support for the Babbage board (i.MX5)
  mxc: Add mx51_defconfig
  mxc: MAINTAINERS: Add maintainer for mach-mx5

Sascha Hauer (1):
  mxc: refactor timer code to use timer versions

 MAINTAINERS                                  |    6 +
 arch/arm/Makefile                            |    1 +
 arch/arm/configs/mx51_defconfig              | 1286 ++++++++++++++++++++++++++
 arch/arm/mach-mx5/Kconfig                    |   18 +
 arch/arm/mach-mx5/Makefile                   |    9 +
 arch/arm/mach-mx5/Makefile.boot              |    3 +
 arch/arm/mach-mx5/board-mx51_babbage.c       |   98 ++
 arch/arm/mach-mx5/clock-mx51.c               |  825 +++++++++++++++++
 arch/arm/mach-mx5/cpu.c                      |   47 +
 arch/arm/mach-mx5/crm_regs.h                 |  583 ++++++++++++
 arch/arm/mach-mx5/devices.c                  |   96 ++
 arch/arm/mach-mx5/devices.h                  |    4 +
 arch/arm/mach-mx5/mm.c                       |   89 ++
 arch/arm/plat-mxc/Kconfig                    |   16 +
 arch/arm/plat-mxc/Makefile                   |    3 +
 arch/arm/plat-mxc/include/mach/common.h      |    5 +
 arch/arm/plat-mxc/include/mach/debug-macro.S |    9 +
 arch/arm/plat-mxc/include/mach/entry-macro.S |   34 +-
 arch/arm/plat-mxc/include/mach/hardware.h    |    4 +
 arch/arm/plat-mxc/include/mach/iomux-mx51.h  |  326 +++++++
 arch/arm/plat-mxc/include/mach/iomux-v3.h    |    8 +-
 arch/arm/plat-mxc/include/mach/irqs.h        |    9 +-
 arch/arm/plat-mxc/include/mach/memory.h      |    3 +
 arch/arm/plat-mxc/include/mach/mx51.h        |  454 +++++++++
 arch/arm/plat-mxc/include/mach/mxc.h         |   13 +
 arch/arm/plat-mxc/include/mach/timex.h       |    2 +
 arch/arm/plat-mxc/time.c                     |   41 +-
 arch/arm/plat-mxc/tzic.c                     |  172 ++++
 28 files changed, 4144 insertions(+), 20 deletions(-)
 create mode 100644 arch/arm/configs/mx51_defconfig
 create mode 100644 arch/arm/mach-mx5/Kconfig
 create mode 100644 arch/arm/mach-mx5/Makefile
 create mode 100644 arch/arm/mach-mx5/Makefile.boot
 create mode 100644 arch/arm/mach-mx5/board-mx51_babbage.c
 create mode 100644 arch/arm/mach-mx5/clock-mx51.c
 create mode 100644 arch/arm/mach-mx5/cpu.c
 create mode 100644 arch/arm/mach-mx5/crm_regs.h
 create mode 100644 arch/arm/mach-mx5/devices.c
 create mode 100644 arch/arm/mach-mx5/devices.h
 create mode 100644 arch/arm/mach-mx5/mm.c
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx51.h
 create mode 100644 arch/arm/plat-mxc/include/mach/mx51.h
 create mode 100644 arch/arm/plat-mxc/tzic.c