[PATCH 08/19] omap_hsmmc: Ensure regulator enable / disable are paired

[Tony Lindgren]

From: Adrian Hunter <adrian.hunter at nokia.com>

Stop using 'regulator_is_enabled()' and just pair enables
with disables so that the regulator reference counts can
work correctly.

Signed-off-by: Adrian Hunter <adrian.hunter at nokia.com>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
 drivers/mmc/host/omap_hsmmc.c |    9 +++------
 1 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index cb94044..d2fad58 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -296,11 +296,8 @@ static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on,
 				ret = mmc_regulator_set_ocr(host->vcc, 0);
 		}
 	} else {
-		if (host->vcc_aux) {
-			ret = regulator_is_enabled(host->vcc_aux);
-			if (ret > 0)
-				ret = regulator_disable(host->vcc_aux);
-		}
+		if (host->vcc_aux)
+			ret = regulator_disable(host->vcc_aux);
 		if (ret == 0)
 			ret = mmc_regulator_set_ocr(host->vcc, 0);
 	}
@@ -1975,7 +1972,7 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
 	host->slot_id	= 0;
 	host->mapbase	= res->start;
 	host->base	= ioremap(host->mapbase, SZ_4K);
-	host->power_mode = -1;
+	host->power_mode = MMC_POWER_OFF;
 
 	platform_set_drvdata(pdev, host);
 	INIT_WORK(&host->mmc_carddetect_work, omap_hsmmc_detect);