[PATCH 4/4] ux500: support clock gating
Rabin Vincent
rabin.vincent at stericsson.com
Tue Feb 23 05:13:02 EST 2010
Implment clock gating support for the u8500 clocks.
Acked-by: Linus Walleij <linus.walleij at stericsson.com>
Acked-by: Srinidhi Kasagar <srinidhi.kasagar at stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent at stericsson.com>
---
arch/arm/mach-ux500/board-mop500.c | 2 +-
arch/arm/mach-ux500/clock.c | 491 +++++++++++++++++++++++++++++++++---
arch/arm/mach-ux500/clock.h | 125 +++++++++
arch/arm/mach-ux500/cpu-u8500.c | 7 +
4 files changed, 590 insertions(+), 35 deletions(-)
create mode 100644 arch/arm/mach-ux500/clock.h
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index c2b4a35..4335186 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -94,7 +94,7 @@ static struct pl022_ssp_controller ssp0_platform_data = {
static struct amba_device pl022_device = {
.dev = {
.coherent_dma_mask = ~0,
- .init_name = "pl022",
+ .init_name = "ssp0",
.platform_data = &ssp0_platform_data,
},
.res = {
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 8359a73..cf9b013 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2009 ST-Ericsson
- * heavily based on realview platform
+ * Copyright (C) 2009 STMicrolectronics
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -12,33 +12,130 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/mutex.h>
+#include <linux/io.h>
#include <asm/clkdev.h>
-/* currently the clk structure
- * just supports rate. This would
- * be extended as and when new devices are
- * added - TODO
- */
-struct clk {
- unsigned long rate;
-};
+#include <mach/hardware.h>
+#include "clock.h"
+
+#define PRCC_PCKEN 0x00
+#define PRCC_PCKDIS 0x04
+#define PRCC_KCKEN 0x08
+#define PRCC_KCKDIS 0x0C
+
+#define PRCM_YYCLKEN0_MGT_SET 0x510
+#define PRCM_YYCLKEN1_MGT_SET 0x514
+#define PRCM_YYCLKEN0_MGT_CLR 0x518
+#define PRCM_YYCLKEN1_MGT_CLR 0x51C
+#define PRCM_YYCLKEN0_MGT_VAL 0x520
+#define PRCM_YYCLKEN1_MGT_VAL 0x524
+
+#define PRCM_SVAMMDSPCLK_MGT 0x008
+#define PRCM_SIAMMDSPCLK_MGT 0x00C
+#define PRCM_SGACLK_MGT 0x014
+#define PRCM_UARTCLK_MGT 0x018
+#define PRCM_MSP02CLK_MGT 0x01C
+#define PRCM_MSP1CLK_MGT 0x288
+#define PRCM_I2CCLK_MGT 0x020
+#define PRCM_SDMMCCLK_MGT 0x024
+#define PRCM_SLIMCLK_MGT 0x028
+#define PRCM_PER1CLK_MGT 0x02C
+#define PRCM_PER2CLK_MGT 0x030
+#define PRCM_PER3CLK_MGT 0x034
+#define PRCM_PER5CLK_MGT 0x038
+#define PRCM_PER6CLK_MGT 0x03C
+#define PRCM_PER7CLK_MGT 0x040
+#define PRCM_LCDCLK_MGT 0x044
+#define PRCM_BMLCLK_MGT 0x04C
+#define PRCM_HSITXCLK_MGT 0x050
+#define PRCM_HSIRXCLK_MGT 0x054
+#define PRCM_HDMICLK_MGT 0x058
+#define PRCM_APEATCLK_MGT 0x05C
+#define PRCM_APETRACECLK_MGT 0x060
+#define PRCM_MCDECLK_MGT 0x064
+#define PRCM_IPI2CCLK_MGT 0x068
+#define PRCM_DSIALTCLK_MGT 0x06C
+#define PRCM_DMACLK_MGT 0x074
+#define PRCM_B2R2CLK_MGT 0x078
+#define PRCM_TVCLK_MGT 0x07C
+#define PRCM_UNIPROCLK_MGT 0x278
+#define PRCM_SSPCLK_MGT 0x280
+#define PRCM_RNGCLK_MGT 0x284
+#define PRCM_UICCCLK_MGT 0x27C
+
+#define PRCM_MGT_ENABLE (1 << 8)
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+ if (clk->enabled++ == 0) {
+ if (clk->parent_cluster)
+ __clk_enable(clk->parent_cluster);
+
+ if (clk->parent_periph)
+ __clk_enable(clk->parent_periph);
+
+ if (clk->ops && clk->ops->enable)
+ clk->ops->enable(clk);
+ }
+}
int clk_enable(struct clk *clk)
{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
return 0;
}
EXPORT_SYMBOL(clk_enable);
+static void __clk_disable(struct clk *clk)
+{
+ if (--clk->enabled == 0) {
+ if (clk->ops && clk->ops->disable)
+ clk->ops->disable(clk);
+
+ if (clk->parent_periph)
+ __clk_disable(clk->parent_periph);
+
+ if (clk->parent_cluster)
+ __clk_disable(clk->parent_cluster);
+ }
+}
+
void clk_disable(struct clk *clk)
{
+ unsigned long flags;
+
+ WARN_ON(!clk->enabled);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
- return clk->rate;
+ unsigned long rate;
+
+ if (clk->ops && clk->ops->get_rate)
+ return clk->ops->get_rate(clk);
+
+ rate = clk->rate;
+ if (!rate) {
+ if (clk->parent_periph)
+ rate = clk_get_rate(clk->parent_periph);
+ else if (clk->parent_cluster)
+ rate = clk_get_rate(clk->parent_cluster);
+ }
+
+ return rate;
}
EXPORT_SYMBOL(clk_get_rate);
@@ -56,37 +153,363 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
}
EXPORT_SYMBOL(clk_set_rate);
-/* ssp clock */
-static struct clk ssp_clk = {
- .rate = 48000000,
+static void clk_prcmu_enable(struct clk *clk)
+{
+ void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
+ + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off;
+
+ writel(1 << clk->prcmu_cg_bit, cg_set_reg);
+}
+
+static void clk_prcmu_disable(struct clk *clk)
+{
+ void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE)
+ + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off;
+
+ writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
+}
+
+/* ED doesn't have the combined set/clr registers */
+static void clk_prcmu_ed_enable(struct clk *clk)
+{
+ void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+ + clk->prcmu_cg_mgt;
+
+ writel(readl(addr) | PRCM_MGT_ENABLE, addr);
+}
+
+static void clk_prcmu_ed_disable(struct clk *clk)
+{
+ void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+ + clk->prcmu_cg_mgt;
+
+ writel(readl(addr) & ~PRCM_MGT_ENABLE, addr);
+}
+
+static struct clkops clk_prcmu_ops = {
+ .enable = clk_prcmu_enable,
+ .disable = clk_prcmu_disable,
};
-/* fixed clock */
-static struct clk f38_clk = {
- .rate = 38400000,
+static unsigned int clkrst_base[] = {
+ [1] = U8500_CLKRST1_BASE,
+ [2] = U8500_CLKRST2_BASE,
+ [3] = U8500_CLKRST3_BASE,
+ [5] = U8500_CLKRST5_BASE,
+ [6] = U8500_CLKRST6_BASE,
+ [7] = U8500_CLKRST7_BASE_ED,
};
-static struct clk_lookup lookups[] = {
- {
- /* UART0 */
- .dev_id = "uart0",
- .clk = &f38_clk,
- }, { /* UART1 */
- .dev_id = "uart1",
- .clk = &f38_clk,
- }, { /* UART2 */
- .dev_id = "uart2",
- .clk = &f38_clk,
- }, { /* SSP */
- .dev_id = "pl022",
- .clk = &ssp_clk,
- }
+static void clk_prcc_enable(struct clk *clk)
+{
+ void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
+
+ if (clk->prcc_kernel != -1)
+ writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN);
+
+ if (clk->prcc_bus != -1)
+ writel(1 << clk->prcc_bus, addr + PRCC_PCKEN);
+}
+
+static void clk_prcc_disable(struct clk *clk)
+{
+ void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
+
+ if (clk->prcc_bus != -1)
+ writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS);
+
+ if (clk->prcc_kernel != -1)
+ writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS);
+}
+
+static struct clkops clk_prcc_ops = {
+ .enable = clk_prcc_enable,
+ .disable = clk_prcc_disable,
+};
+
+static struct clk clk_32khz = {
+ .rate = 32000,
+};
+
+/*
+ * PRCMU level clock gating
+ */
+
+/* Bank 0 */
+static DEFINE_PRCMU_CLK(svaclk, 0x0, 2, SVAMMDSPCLK);
+static DEFINE_PRCMU_CLK(siaclk, 0x0, 3, SIAMMDSPCLK);
+static DEFINE_PRCMU_CLK(sgaclk, 0x0, 4, SGACLK);
+static DEFINE_PRCMU_CLK_RATE(uartclk, 0x0, 5, UARTCLK, 38400000);
+static DEFINE_PRCMU_CLK(msp02clk, 0x0, 6, MSP02CLK);
+static DEFINE_PRCMU_CLK(msp1clk, 0x0, 7, MSP1CLK); /* v1 */
+static DEFINE_PRCMU_CLK_RATE(i2cclk, 0x0, 8, I2CCLK, 48000000);
+static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 50000000);
+static DEFINE_PRCMU_CLK(slimclk, 0x0, 10, SLIMCLK);
+static DEFINE_PRCMU_CLK(per1clk, 0x0, 11, PER1CLK);
+static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK);
+static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK);
+static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK);
+static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000);
+static DEFINE_PRCMU_CLK_RATE(per7clk, 0x0, 16, PER7CLK, 100000000);
+static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK);
+static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK);
+static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK);
+static DEFINE_PRCMU_CLK(hsirxclk, 0x0, 20, HSIRXCLK);
+static DEFINE_PRCMU_CLK(hdmiclk, 0x0, 21, HDMICLK);
+static DEFINE_PRCMU_CLK(apeatclk, 0x0, 22, APEATCLK);
+static DEFINE_PRCMU_CLK(apetraceclk, 0x0, 23, APETRACECLK);
+static DEFINE_PRCMU_CLK(mcdeclk, 0x0, 24, MCDECLK);
+static DEFINE_PRCMU_CLK(ipi2clk, 0x0, 25, IPI2CCLK);
+static DEFINE_PRCMU_CLK(dsialtclk, 0x0, 26, DSIALTCLK); /* v1 */
+static DEFINE_PRCMU_CLK(dmaclk, 0x0, 27, DMACLK);
+static DEFINE_PRCMU_CLK(b2r2clk, 0x0, 28, B2R2CLK);
+static DEFINE_PRCMU_CLK(tvclk, 0x0, 29, TVCLK);
+static DEFINE_PRCMU_CLK(uniproclk, 0x0, 30, UNIPROCLK); /* v1 */
+static DEFINE_PRCMU_CLK_RATE(sspclk, 0x0, 31, SSPCLK, 48000000); /* v1 */
+
+/* Bank 1 */
+static DEFINE_PRCMU_CLK(rngclk, 0x4, 0, RNGCLK); /* v1 */
+static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */
+
+/*
+ * PRCC level clock gating
+ * Format: per#, clk, PCKEN bit, KCKEN bit, parent
+ */
+
+/* Peripheral Cluster #1 */
+static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL);
+static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk);
+static DEFINE_PRCC_CLK(1, spi3_ed, 7, 7, NULL);
+static DEFINE_PRCC_CLK(1, spi3_v1, 7, -1, NULL);
+static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(1, msp1_ed, 4, 4, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, msp1_v1, 4, 4, &clk_msp1clk);
+static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk);
+static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk);
+
+/* Peripheral Cluster #2 */
+
+static DEFINE_PRCC_CLK(2, gpio1_ed, 12, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssitx_ed, 11, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssirx_ed, 10, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi0_ed, 9, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3_ed, 8, 6, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1_ed, 7, 5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2_ed, 6, 4, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4_ed, 4, 2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, pwl_ed, 3, 1, NULL);
+static DEFINE_PRCC_CLK(2, spi1_ed, 2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2_ed, 1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3_ed, 0, 0, &clk_i2cclk);
+
+static DEFINE_PRCC_CLK(2, gpio1_v1, 11, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssitx_v1, 10, 7, NULL);
+static DEFINE_PRCC_CLK(2, ssirx_v1, 9, 6, NULL);
+static DEFINE_PRCC_CLK(2, spi0_v1, 8, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3_v1, 7, 5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1_v1, 6, 4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2_v1, 5, 3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4_v1, 4, 2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, pwl_v1, 3, 1, NULL);
+static DEFINE_PRCC_CLK(2, spi1_v1, 2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2_v1, 1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3_v1, 0, 0, &clk_i2cclk);
+
+/* Peripheral Cluster #3 */
+static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL);
+static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk);
+static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz);
+static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1_ed, 2, 2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp0_ed, 1, 1, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1_v1, 2, 2, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, ssp0_v1, 1, 1, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL);
+
+/* Peripheral Cluster #4 is in the always on domain */
+
+/* Peripheral Cluster #5 */
+static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL);
+static DEFINE_PRCC_CLK(5, usb_ed, 0, 0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL);
+
+/* Peripheral Cluster #6 */
+
+static DEFINE_PRCC_CLK(6, mtu1_v1, 8, -1, NULL);
+static DEFINE_PRCC_CLK(6, mtu0_v1, 7, -1, NULL);
+static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL);
+static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL);
+static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL);
+static DEFINE_PRCC_CLK(6, unipro_v1, 4, 1, &clk_uniproclk);
+static DEFINE_PRCC_CLK(6, cryp1_ed, 4, -1, NULL);
+static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL);
+static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL);
+static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL);
+static DEFINE_PRCC_CLK(6, rng_ed, 0, 0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk);
+
+/* Peripheral Cluster #7 */
+
+static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL);
+static DEFINE_PRCC_CLK(7, mtu1_ed, 3, -1, NULL);
+static DEFINE_PRCC_CLK(7, mtu0_ed, 2, -1, NULL);
+static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL);
+static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL);
+
+static struct clk_lookup u8500_common_clks[] = {
+ /* Peripheral Cluster #1 */
+ CLK(gpio0, "gpioblock0", NULL),
+ CLK(slimbus0, "slimbus0", NULL),
+ CLK(i2c2, "nmk-i2c.2", NULL),
+ CLK(sdi0, "sdi0", NULL),
+ CLK(msp0, "msp0", NULL),
+ CLK(i2c1, "nmk-i2c.1", NULL),
+ CLK(uart1, "uart1", NULL),
+ CLK(uart0, "uart0", NULL),
+
+ /* Peripheral Cluster #3 */
+ CLK(gpio2, "gpioblock2", NULL),
+ CLK(sdi5, "sdi5", NULL),
+ CLK(uart2, "uart2", NULL),
+ CLK(ske, "ske", NULL),
+ CLK(sdi2, "sdi2", NULL),
+ CLK(i2c0, "nmk-i2c.0", NULL),
+ CLK(fsmc, "fsmc", NULL),
+
+ /* Peripheral Cluster #5 */
+ CLK(gpio3, "gpioblock3", NULL),
+
+ /* Peripheral Cluster #6 */
+ CLK(hash1, "hash1", NULL),
+ CLK(pka, "pka", NULL),
+ CLK(hash0, "hash0", NULL),
+ CLK(cryp0, "cryp0", NULL),
+
+ /* PRCMU level clock gating */
+
+ /* Bank 0 */
+ CLK(svaclk, "sva", NULL),
+ CLK(siaclk, "sia", NULL),
+ CLK(sgaclk, "sga", NULL),
+ CLK(slimclk, "slim", NULL),
+ CLK(lcdclk, "lcd", NULL),
+ CLK(bmlclk, "bml", NULL),
+ CLK(hsitxclk, "stm-hsi.0", NULL),
+ CLK(hsirxclk, "stm-hsi.1", NULL),
+ CLK(hdmiclk, "hdmi", NULL),
+ CLK(apeatclk, "apeat", NULL),
+ CLK(apetraceclk, "apetrace", NULL),
+ CLK(mcdeclk, "mcde", NULL),
+ CLK(ipi2clk, "ipi2", NULL),
+ CLK(dmaclk, "dma40", NULL),
+ CLK(b2r2clk, "b2r2", NULL),
+ CLK(tvclk, "tv", NULL),
+};
+
+static struct clk_lookup u8500_ed_clks[] = {
+ /* Peripheral Cluster #1 */
+ CLK(spi3_ed, "spi3", NULL),
+ CLK(msp1_ed, "msp1", NULL),
+
+ /* Peripheral Cluster #2 */
+ CLK(gpio1_ed, "gpioblock1", NULL),
+ CLK(ssitx_ed, "ssitx", NULL),
+ CLK(ssirx_ed, "ssirx", NULL),
+ CLK(spi0_ed, "spi0", NULL),
+ CLK(sdi3_ed, "sdi3", NULL),
+ CLK(sdi1_ed, "sdi1", NULL),
+ CLK(msp2_ed, "msp2", NULL),
+ CLK(sdi4_ed, "sdi4", NULL),
+ CLK(pwl_ed, "pwl", NULL),
+ CLK(spi1_ed, "spi1", NULL),
+ CLK(spi2_ed, "spi2", NULL),
+ CLK(i2c3_ed, "nmk-i2c.3", NULL),
+
+ /* Peripheral Cluster #3 */
+ CLK(ssp1_ed, "ssp1", NULL),
+ CLK(ssp0_ed, "ssp0", NULL),
+
+ /* Peripheral Cluster #5 */
+ CLK(usb_ed, "musb_hdrc.0", "usb"),
+
+ /* Peripheral Cluster #6 */
+ CLK(dmc_ed, "dmc", NULL),
+ CLK(cryp1_ed, "cryp1", NULL),
+ CLK(rng_ed, "rng", NULL),
+
+ /* Peripheral Cluster #7 */
+ CLK(tzpc0_ed, "tzpc0", NULL),
+ CLK(mtu1_ed, "mtu1", NULL),
+ CLK(mtu0_ed, "mtu0", NULL),
+ CLK(wdg_ed, "wdg", NULL),
+ CLK(cfgreg_ed, "cfgreg", NULL),
+};
+
+static struct clk_lookup u8500_v1_clks[] = {
+ /* Peripheral Cluster #1 */
+ CLK(i2c4, "nmk-i2c.4", NULL),
+ CLK(spi3_v1, "spi3", NULL),
+ CLK(msp1_v1, "msp1", NULL),
+
+ /* Peripheral Cluster #2 */
+ CLK(gpio1_v1, "gpioblock1", NULL),
+ CLK(ssitx_v1, "ssitx", NULL),
+ CLK(ssirx_v1, "ssirx", NULL),
+ CLK(spi0_v1, "spi0", NULL),
+ CLK(sdi3_v1, "sdi3", NULL),
+ CLK(sdi1_v1, "sdi1", NULL),
+ CLK(msp2_v1, "msp2", NULL),
+ CLK(sdi4_v1, "sdi4", NULL),
+ CLK(pwl_v1, "pwl", NULL),
+ CLK(spi1_v1, "spi1", NULL),
+ CLK(spi2_v1, "spi2", NULL),
+ CLK(i2c3_v1, "nmk-i2c.3", NULL),
+
+ /* Peripheral Cluster #3 */
+ CLK(ssp1_v1, "ssp1", NULL),
+ CLK(ssp0_v1, "ssp0", NULL),
+
+ /* Peripheral Cluster #5 */
+ CLK(usb_v1, "musb_hdrc.0", "usb"),
+
+ /* Peripheral Cluster #6 */
+ CLK(mtu1_v1, "mtu1", NULL),
+ CLK(mtu0_v1, "mtu0", NULL),
+ CLK(cfgreg_v1, "cfgreg", NULL),
+ CLK(hash1, "hash1", NULL),
+ CLK(unipro_v1, "unipro", NULL),
+ CLK(rng_v1, "rng", NULL),
+
+ /* PRCMU level clock gating */
+
+ /* Bank 0 */
+ CLK(uniproclk, "uniproclk", NULL),
+ CLK(dsialtclk, "dsialt", NULL),
+
+ /* Bank 1 */
+ CLK(rngclk, "rng", NULL),
+ CLK(uiccclk, "uicc", NULL),
};
static int __init clk_init(void)
{
- /* register the clock lookups */
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+ if (cpu_is_u8500ed()) {
+ clk_prcmu_ops.enable = clk_prcmu_ed_enable;
+ clk_prcmu_ops.disable = clk_prcmu_ed_disable;
+ }
+
+ clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
+ if (cpu_is_u8500ed())
+ clkdev_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks));
+ else
+ clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
+
return 0;
}
arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
new file mode 100644
index 0000000..e6b7ca4
--- /dev/null
+++ b/arch/arm/mach-ux500/clock.h
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2010 ST-Ericsson
+ * Copyright (C) 2009 STMicrolectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * struct clkops - ux500 clock operations
+ * @enable: function to enable the clock
+ * @disable: function to disable the clock
+ * @get_rate: function to get the current clock rate
+ *
+ * This structure contains function pointers to functions that will be used to
+ * control the clock. All of these functions are optional. If get_rate is
+ * NULL, the rate in the struct clk will be used.
+ */
+struct clkops {
+ void (*enable) (struct clk *);
+ void (*disable) (struct clk *);
+ unsigned long (*get_rate) (struct clk *);
+};
+
+/**
+ * struct clk - ux500 clock structure
+ * @ops: pointer to clkops struct used to control this clock
+ * @name: name, for debugging
+ * @enabled: refcount. positive if enabled, zero if disabled
+ * @rate: fixed rate for clocks which don't implement
+ * ops->getrate
+ * @prcmu_cg_off: address offset of the combined enable/disable register
+ * (used on u8500v1)
+ * @prcmu_cg_bit: bit in the combined enable/disable register (used on
+ * u8500v1)
+ * @prcmu_cg_mgt: address of the enable/disable register (used on
+ * u8500ed)
+ * @cluster: peripheral cluster number
+ * @prcc_bus: bit for the bus clock in the peripheral's CLKRST
+ * @prcc_kernel: bit for the kernel clock in the peripheral's CLKRST.
+ * -1 if no kernel clock exists.
+ * @parent_cluster: pointer to parent's cluster clk struct
+ * @parent_periph: pointer to parent's peripheral clk struct
+ *
+ * Peripherals are organised into clusters, and each cluster has an associated
+ * bus clock. Some peripherals also have a parent peripheral clock.
+ *
+ * In order to enable a clock for a peripheral, we need to enable:
+ * (1) the parent cluster (bus) clock at the PRCMU level
+ * (2) the parent peripheral clock (if any) at the PRCMU level
+ * (3) the peripheral's bus & kernel clock at the PRCC level
+ *
+ * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each
+ * of the cluster and peripheral clocks, and hooking these as the parents of
+ * the individual peripheral clocks.
+ *
+ * (3) is handled by specifying the bits in the PRCC control registers required
+ * to enable these clocks and modifying them in the ->enable and
+ * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK).
+ *
+ * This structure describes both the PRCMU-level clocks and PRCC-level clocks.
+ * The prcmu_* fields are only used for the PRCMU clocks, and the cluster,
+ * prcc, and parent pointers are only used for the PRCC-level clocks.
+ */
+struct clk {
+ const struct clkops *ops;
+ const char *name;
+ unsigned int enabled;
+
+ unsigned long rate;
+ struct list_head list;
+
+ /* These three are only for PRCMU clks */
+
+ unsigned int prcmu_cg_off;
+ unsigned int prcmu_cg_bit;
+ unsigned int prcmu_cg_mgt;
+
+ /* The rest are only for PRCC clks */
+
+ int cluster;
+ unsigned int prcc_bus;
+ unsigned int prcc_kernel;
+
+ struct clk *parent_cluster;
+ struct clk *parent_periph;
+};
+
+#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg) \
+struct clk clk_##_name = { \
+ .name = #_name, \
+ .ops = &clk_prcmu_ops, \
+ .prcmu_cg_off = _cg_off, \
+ .prcmu_cg_bit = _cg_bit, \
+ .prcmu_cg_mgt = PRCM_##_reg##_MGT \
+ }
+
+#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate) \
+struct clk clk_##_name = { \
+ .name = #_name, \
+ .ops = &clk_prcmu_ops, \
+ .prcmu_cg_off = _cg_off, \
+ .prcmu_cg_bit = _cg_bit, \
+ .rate = _rate, \
+ .prcmu_cg_mgt = PRCM_##_reg##_MGT \
+ }
+
+#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk) \
+struct clk clk_##_name = { \
+ .name = #_name, \
+ .ops = &clk_prcc_ops, \
+ .cluster = _pclust, \
+ .prcc_bus = _bus_en, \
+ .prcc_kernel = _kernel_en, \
+ .parent_cluster = &clk_per##_pclust##clk, \
+ .parent_periph = _kernclk \
+ }
+
+#define CLK(_clk, _devname, _conname) \
+ { \
+ .clk = &clk_##_clk, \
+ .dev_id = _devname, \
+ .con_id = _conname, \
+ }
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c
index f368504..09bcba1 100644
--- a/arch/arm/mach-ux500/cpu-u8500.c
+++ b/arch/arm/mach-ux500/cpu-u8500.c
@@ -43,10 +43,17 @@ static struct map_desc u8500_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
+ __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),
};
static struct map_desc u8500ed_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K),
};
static struct map_desc u8500v1_io_desc[] __initdata = {
--
1.7.0
More information about the linux-arm-kernel
mailing list