[PATCH 02/16] arm: remove trailing spaces in messages
Frans Pop
elendil at planet.nl
Sat Feb 6 12:47:09 EST 2010
Also make 'Displaying register contents' messages consistent in
mach-bcmring/csp/{dmac/dmacHw_extra.c,tmr/tmrHw.c}.
Minor checkpatch fixes for mach-lh7a40x/clcd.c and mach-pxa/pxa27x.c.
Signed-off-by: Frans Pop <elendil at planet.nl>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Russell King <linux at arm.linux.org.uk>
---
arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c | 2 +-
arch/arm/mach-bcmring/csp/tmr/tmrHw.c | 2 +-
arch/arm/mach-lh7a40x/clcd.c | 8 ++++----
arch/arm/mach-pxa/pxa27x.c | 8 ++++----
arch/arm/mach-pxa/stargate2.c | 2 +-
arch/arm/mach-sa1100/jornada720_ssp.c | 2 +-
6 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
index ff7b436..6ef32dc 100644
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -73,7 +73,7 @@ static void DisplayRegisterContents(int module, /* [ IN ] DMA Controller unit
) {
int chan;
- (*fpPrint) ("Displaying register content \n\n");
+ (*fpPrint) ("Displaying register contents\n\n");
(*fpPrint) ("Module %d: Interrupt raw transfer 0x%X\n",
module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module)));
(*fpPrint) ("Module %d: Interrupt raw block 0x%X\n",
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
index 5c1c9a0..b086285 100644
--- a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -498,7 +498,7 @@ tmrHw_ID_t tmrHw_getInterruptSource(void /* void */
void tmrHw_printDebugInfo(tmrHw_ID_t timerId, /* [ IN ] Timer id */
int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
) {
- (*fpPrint) ("Displaying register contents \n\n");
+ (*fpPrint) ("Displaying register contents\n\n");
(*fpPrint) ("Timer %d: Load value 0x%X\n", timerId,
pTmrHw[timerId].LoadValue);
(*fpPrint) ("Timer %d: Background load value 0x%X\n", timerId,
diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c
index c472b9e..231a24a 100644
--- a/arch/arm/mach-lh7a40x/clcd.c
+++ b/arch/arm/mach-lh7a40x/clcd.c
@@ -147,10 +147,10 @@ static int lh7a40x_clcd_setup (struct clcd_fb *fb)
fb->fb.screen_base
= dma_alloc_writecombine (&fb->dev->dev, len,
&dma, GFP_KERNEL);
- printk ("CLCD: LCD setup fb virt 0x%p phys 0x%p l %x io 0x%p \n",
+ printk("CLCD: LCD setup fb virt 0x%p phys 0x%p l %x io 0x%p\n",
fb->fb.screen_base, (void*) dma, len,
(void*) io_p2v (CLCDC_PHYS));
- printk ("CLCD: pixclock %d\n", lcd_panel.mode.pixclock);
+ printk("CLCD: pixclock %d\n", lcd_panel.mode.pixclock);
if (!fb->fb.screen_base) {
printk(KERN_ERR "CLCD: unable to map framebuffer\n");
@@ -231,10 +231,10 @@ void __init lh7a40x_clcd_init (void)
{
int i;
int result;
- printk ("CLCD: registering amba devices\n");
+ printk("CLCD: registering amba devices\n");
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
result = amba_device_register(d, &iomem_resource);
- printk (" %d -> %d\n", i ,result);
+ printk(" %d -> %d\n", i, result);
}
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 6a0b731..039f21f 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -73,14 +73,14 @@ unsigned int pxa27x_get_clk_frequency_khz(int info)
S = (b) ? L : (L/2);
if (info) {
- printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
+ printk(KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
L / 1000000, (L % 1000000) / 10000, l );
- printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
+ printk(KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
N / 1000000, (N % 1000000)/10000, n2 / 2, (n2 % 2)*5,
(t) ? "" : "in" );
- printk( KERN_INFO "Memory clock: %d.%02dMHz (/%d)\n",
+ printk(KERN_INFO "Memory clock: %d.%02dMHz (/%d)\n",
M / 1000000, (M % 1000000) / 10000, m );
- printk( KERN_INFO "System bus clock: %d.%02dMHz \n",
+ printk(KERN_INFO "System bus clock: %d.%02dMHz\n",
S / 1000000, (S % 1000000) / 10000 );
}
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index a98a434..54a041b 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -167,7 +167,7 @@ static int stargate2_reset_bluetooth(void)
int err;
err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
if (err) {
- printk(KERN_ERR "Could not get gpio for bluetooth reset \n");
+ printk(KERN_ERR "Could not get gpio for bluetooth reset\n");
return err;
}
gpio_direction_output(SG2_BT_RESET, 1);
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 506a5e5..3bf34ac 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -144,7 +144,7 @@ static int __init jornada_ssp_probe(struct platform_device *dev)
return ret;
}
- printk(KERN_WARNING "SSP: initialization failed, trying non-irq solution \n");
+ printk(KERN_WARNING "SSP: initialization failed, trying non-irq solution\n");
/* init of Serial 4 port */
Ser4MCCR0 = 0;
--
1.6.6.1
More information about the linux-arm-kernel
mailing list