[PATCH 5/5] input: support onkey in 88pm860x

[Dmitry Torokhov]

Hi Haojian,

On Wed, Feb 03, 2010 at 08:04:30AM -0500, Haojian Zhuang wrote:

Looks most;y good with the exceptin of the following:

> +
> +	info = kzalloc(sizeof(struct pm860x_onkey_info), GFP_KERNEL);
> +	if (!info)
> +		return -ENOMEM;
> +	info->chip = chip;
> +	info->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
> +	info->dev = &pdev->dev;
> +	info->irq = irq + chip->irq_base;
> +
> +	ret = request_threaded_irq(info->irq, NULL, pm860x_onkey_handler,
> +				   IRQF_ONESHOT, "onkey", info);
> +	if (ret < 0) {
> +		dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
> +			info->irq, ret);
> +		goto out;
> +	}
> +
> +	info->idev = input_allocate_device();

You can't enable IRQ first and allocate the device later. If IRQ comes
here it will go "BOOM".

> +	if (!info->idev) {
> +		dev_err(chip->dev, "Failed to allocate input dev\n");
> +		ret = -ENOMEM;
> +		goto out_input;
> +	}
> +
> +	info->idev->name = "88pm860x_on";
> +	info->idev->phys = "88pm860x_on/input0";
> +	info->idev->id.bustype = BUS_I2C;
> +	info->idev->dev.parent = &pdev->dev;
> +	info->irq = irq;
> +	info->idev->evbit[0] = BIT_MASK(EV_KEY);
> +	info->idev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
> +
> +	ret = input_register_device(info->idev);
> +	if (ret) {
> +		dev_err(chip->dev, "Can't register input device: %d\n", ret);
> +		goto out_reg;
> +	}
> +	platform_set_drvdata(pdev, info);
> +
> +	return 0;
> +
> +out_reg:
> +	input_free_device(info->idev);
> +out_input:
> +	free_irq(info->irq, info);

So this needs to be in reverse order as well.

> +out:
> +	kfree(info);
> +	return ret;
> +}
> +
> +static int __devexit pm860x_onkey_remove(struct platform_device *pdev)
> +{
> +	struct pm860x_onkey_info *info = platform_get_drvdata(pdev);
> +
> +	if (info) {

"info" will never be NULL, your probe routine makes sure of it. Also it
is considered a good manners to set drvdata back to NULL after
unbinding.

> +		free_irq(info->irq, info);
> +		input_unregister_device(info->idev);
> +		kfree(info);
> +	}
> +	return 0;
> +}
> +

Thanks.

-- 
Dmitry