[PATCH 05/13] OMAP2 clock: drop CONFIG_PARTICIPANT clock flag
Paul Walmsley
paul at pwsan.com
Thu Feb 11 13:17:01 EST 2010
It turns out that the only purpose of the CONFIG_PARTICIPANT clock
flag is to prevent omap2_clk_set_rate() and omap2_clk_set_parent()
from being executed on clocks with that flag set. The rate-changing
component can be more directly accomplished by dropping the .set_rate
and .round_rate function pointers from those CONFIG_PARTICIPANT struct
clks. As far as the parent-changing component is concerned, it turns
out that none of the CONFIG_PARTICIPANT clocks have multiple parent
choices, so all that is necessary is for omap2_clk_set_parent() to
bail out early if the new parent is equal to the old parent.
Implement this change and get rid of the flag, which has always had a
confusing name (it appears to be a Kconfig option, falsely).
Signed-off-by: Paul Walmsley <paul at pwsan.com>
Cc: Richard Woodruff <r-woodruff2 at ti.com>
---
arch/arm/mach-omap2/clock.c | 11 +++-------
arch/arm/mach-omap2/clock2xxx_data.c | 35 +++++++------------------------
arch/arm/plat-omap/include/plat/clock.h | 2 +-
3 files changed, 12 insertions(+), 36 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 3bb3292..9df5937 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -318,11 +318,6 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate);
- /* CONFIG_PARTICIPANT clocks are changed only in sets via the
- rate table mechanism, driven by mpu_speed */
- if (clk->flags & CONFIG_PARTICIPANT)
- return -EINVAL;
-
/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
if (clk->set_rate)
ret = clk->set_rate(clk, rate);
@@ -332,12 +327,12 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
{
- if (clk->flags & CONFIG_PARTICIPANT)
- return -EINVAL;
-
if (!clk->clksel)
return -EINVAL;
+ if (clk->parent == new_parent)
+ return 0;
+
return omap2_clksel_set_parent(clk, new_parent);
}
diff --git a/arch/arm/mach-omap2/clock2xxx_data.c b/arch/arm/mach-omap2/clock2xxx_data.c
index aa37761..9bcef44 100644
--- a/arch/arm/mach-omap2/clock2xxx_data.c
+++ b/arch/arm/mach-omap2/clock2xxx_data.c
@@ -426,15 +426,13 @@ static struct clk mpu_ck = { /* Control cpu */
.name = "mpu_ck",
.ops = &clkops_null,
.parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP,
.clkdm_name = "mpu_clkdm",
.init = &omap2_init_clksel_parent,
.clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
.clksel_mask = OMAP24XX_CLKSEL_MPU_MASK,
.clksel = mpu_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/*
@@ -468,7 +466,7 @@ static struct clk dsp_fck = {
.name = "dsp_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP,
.clkdm_name = "dsp_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
@@ -476,8 +474,6 @@ static struct clk dsp_fck = {
.clksel_mask = OMAP24XX_CLKSEL_DSP_MASK,
.clksel = dsp_fck_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/* DSP interface clock */
@@ -498,13 +494,11 @@ static struct clk dsp_irate_ick = {
.name = "dsp_irate_ick",
.ops = &clkops_null,
.parent = &dsp_fck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP,
.clksel_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
.clksel_mask = OMAP24XX_CLKSEL_DSP_IF_MASK,
.clksel = dsp_irate_ick_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/* 2420 only */
@@ -512,7 +506,6 @@ static struct clk dsp_ick = {
.name = "dsp_ick", /* apparently ipi and isp */
.ops = &clkops_omap2_dflt_wait,
.parent = &dsp_irate_ick,
- .flags = CONFIG_PARTICIPANT,
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
.enable_bit = OMAP2420_EN_DSP_IPI_SHIFT, /* for ipi */
};
@@ -522,7 +515,6 @@ static struct clk iva2_1_ick = {
.name = "iva2_1_ick",
.ops = &clkops_omap2_dflt_wait,
.parent = &dsp_irate_ick,
- .flags = CONFIG_PARTICIPANT,
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
};
@@ -536,7 +528,7 @@ static struct clk iva1_ifck = {
.name = "iva1_ifck",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = CONFIG_PARTICIPANT | DELAYED_APP,
+ .flags = DELAYED_APP,
.clkdm_name = "iva1_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
.enable_bit = OMAP2420_EN_IVA_COP_SHIFT,
@@ -544,8 +536,6 @@ static struct clk iva1_ifck = {
.clksel_mask = OMAP2420_CLKSEL_IVA_MASK,
.clksel = dsp_fck_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/* IVA1 mpu/int/i/f clocks are /2 of parent */
@@ -599,14 +589,12 @@ static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */
.name = "core_l3_ck",
.ops = &clkops_null,
.parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP,
.clkdm_name = "core_l3_clkdm",
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
.clksel_mask = OMAP24XX_CLKSEL_L3_MASK,
.clksel = core_l3_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/* usb_l4_ick */
@@ -627,7 +615,7 @@ static struct clk usb_l4_ick = { /* FS-USB interface clock */
.name = "usb_l4_ick",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
.enable_bit = OMAP24XX_EN_USB_SHIFT,
@@ -635,8 +623,6 @@ static struct clk usb_l4_ick = { /* FS-USB interface clock */
.clksel_mask = OMAP24XX_CLKSEL_USB_MASK,
.clksel = usb_l4_ick_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
/*
@@ -763,7 +749,7 @@ static struct clk gfx_2d_fck = {
.name = "gfx_2d_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP,
.clkdm_name = "gfx_clkdm",
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
.enable_bit = OMAP24XX_EN_2D_SHIFT,
@@ -771,15 +757,12 @@ static struct clk gfx_2d_fck = {
.clksel_mask = OMAP_CLKSEL_GFX_MASK,
.clksel = gfx_fck_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
static struct clk gfx_ick = {
.name = "gfx_ick", /* From l3 */
.ops = &clkops_omap2_dflt_wait,
.parent = &core_l3_ck,
- .flags = CONFIG_PARTICIPANT,
.clkdm_name = "gfx_clkdm",
.enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
.enable_bit = OMAP_EN_GFX_SHIFT,
@@ -810,7 +793,7 @@ static struct clk mdm_ick = { /* used both as a ick and fck */
.name = "mdm_ick",
.ops = &clkops_omap2_dflt_wait,
.parent = &core_ck,
- .flags = DELAYED_APP | CONFIG_PARTICIPANT,
+ .flags = DELAYED_APP,
.clkdm_name = "mdm_clkdm",
.enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
.enable_bit = OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
@@ -818,8 +801,6 @@ static struct clk mdm_ick = { /* used both as a ick and fck */
.clksel_mask = OMAP2430_CLKSEL_MDM_MASK,
.clksel = mdm_ick_clksel,
.recalc = &omap2_clksel_recalc,
- .round_rate = &omap2_clksel_round_rate,
- .set_rate = &omap2_clksel_set_rate
};
static struct clk mdm_osc_ck = {
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 1015b1c..5dac307 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -197,7 +197,7 @@ extern const struct clkops clkops_null;
#define CLOCK_IDLE_CONTROL (1 << 7)
#define CLOCK_NO_IDLE_PARENT (1 << 8)
#define DELAYED_APP (1 << 9) /* Delay application of clock */
-#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */
+/* bit 10 is currently free */
#define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */
#define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */
/* bit 13 is currently free */
More information about the linux-arm-kernel
mailing list