[PATCH 1/8] mx1: prefix SOC specific defines with MX1_ and deprecate old names
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Mon Feb 1 11:01:28 EST 2010
The old names are defined only if the cpp symbol
IMX_NEEDS_DEPRECATED_SYMBOLS exists, which is defined (for now) for all
files below arch/arm/mach-mx1.
This was done earlier for mx2 and mx3, too.
USBD_INT0 is for now defined unconditionally to prevent breaking
drivers/usb/gadget/imx_udc.
While at it use IMX_IO_ADDRESS to define MX1_IO_ADDRESS which
adds a cast to the IO_ADDRESS macro fixing many warnings like
arch/arm/mach-mx1/generic.c:51: warning: passing argument 1 of 'mxc_init_irq' makes pointer from integer without a cast
.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
arch/arm/mach-mx1/Makefile | 1 +
arch/arm/plat-mxc/include/mach/mx1.h | 387 +++++++++++++++++++++++-----------
2 files changed, 261 insertions(+), 127 deletions(-)
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
index 297d172..fc2ddf8 100644
--- a/arch/arm/mach-mx1/Makefile
+++ b/arch/arm/mach-mx1/Makefile
@@ -4,6 +4,7 @@
# Object file lists.
+EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-y += generic.o clock.o devices.o
# Support for CMOS sensor interface
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index b652a9c..5eba7e6 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -17,148 +17,281 @@
/*
* Memory map
*/
-#define IMX_IO_PHYS 0x00200000
-#define IMX_IO_SIZE 0x00100000
-#define IMX_IO_BASE VMALLOC_END
+#define MX1_IO_BASE_ADDR 0x00200000
+#define MX1_IO_SIZE SZ_1M
+#define MX1_IO_BASE_ADDR_VIRT VMALLOC_END
-#define IMX_CS0_PHYS 0x10000000
-#define IMX_CS0_SIZE 0x02000000
+#define MX1_CS0_PHYS 0x10000000
+#define MX1_CS0_SIZE 0x02000000
-#define IMX_CS1_PHYS 0x12000000
-#define IMX_CS1_SIZE 0x01000000
+#define MX1_CS1_PHYS 0x12000000
+#define MX1_CS1_SIZE 0x01000000
-#define IMX_CS2_PHYS 0x13000000
-#define IMX_CS2_SIZE 0x01000000
+#define MX1_CS2_PHYS 0x13000000
+#define MX1_CS2_SIZE 0x01000000
-#define IMX_CS3_PHYS 0x14000000
-#define IMX_CS3_SIZE 0x01000000
+#define MX1_CS3_PHYS 0x14000000
+#define MX1_CS3_SIZE 0x01000000
-#define IMX_CS4_PHYS 0x15000000
-#define IMX_CS4_SIZE 0x01000000
+#define MX1_CS4_PHYS 0x15000000
+#define MX1_CS4_SIZE 0x01000000
-#define IMX_CS5_PHYS 0x16000000
-#define IMX_CS5_SIZE 0x01000000
+#define MX1_CS5_PHYS 0x16000000
+#define MX1_CS5_SIZE 0x01000000
/*
* Register BASEs, based on OFFSETs
*/
-#define AIPI1_BASE_ADDR (0x00000 + IMX_IO_PHYS)
-#define WDT_BASE_ADDR (0x01000 + IMX_IO_PHYS)
-#define TIM1_BASE_ADDR (0x02000 + IMX_IO_PHYS)
-#define TIM2_BASE_ADDR (0x03000 + IMX_IO_PHYS)
-#define RTC_BASE_ADDR (0x04000 + IMX_IO_PHYS)
-#define LCDC_BASE_ADDR (0x05000 + IMX_IO_PHYS)
-#define UART1_BASE_ADDR (0x06000 + IMX_IO_PHYS)
-#define UART2_BASE_ADDR (0x07000 + IMX_IO_PHYS)
-#define PWM_BASE_ADDR (0x08000 + IMX_IO_PHYS)
-#define DMA_BASE_ADDR (0x09000 + IMX_IO_PHYS)
-#define AIPI2_BASE_ADDR (0x10000 + IMX_IO_PHYS)
-#define SIM_BASE_ADDR (0x11000 + IMX_IO_PHYS)
-#define USBD_BASE_ADDR (0x12000 + IMX_IO_PHYS)
-#define SPI1_BASE_ADDR (0x13000 + IMX_IO_PHYS)
-#define MMC_BASE_ADDR (0x14000 + IMX_IO_PHYS)
-#define ASP_BASE_ADDR (0x15000 + IMX_IO_PHYS)
-#define BTA_BASE_ADDR (0x16000 + IMX_IO_PHYS)
-#define I2C_BASE_ADDR (0x17000 + IMX_IO_PHYS)
-#define SSI_BASE_ADDR (0x18000 + IMX_IO_PHYS)
-#define SPI2_BASE_ADDR (0x19000 + IMX_IO_PHYS)
-#define MSHC_BASE_ADDR (0x1A000 + IMX_IO_PHYS)
-#define CCM_BASE_ADDR (0x1B000 + IMX_IO_PHYS)
-#define SCM_BASE_ADDR (0x1B804 + IMX_IO_PHYS)
-#define GPIO_BASE_ADDR (0x1C000 + IMX_IO_PHYS)
-#define EIM_BASE_ADDR (0x20000 + IMX_IO_PHYS)
-#define SDRAMC_BASE_ADDR (0x21000 + IMX_IO_PHYS)
-#define MMA_BASE_ADDR (0x22000 + IMX_IO_PHYS)
-#define AVIC_BASE_ADDR (0x23000 + IMX_IO_PHYS)
-#define CSI_BASE_ADDR (0x24000 + IMX_IO_PHYS)
+#define MX1_AIPI1_BASE_ADDR (0x00000 + MX1_IO_BASE_ADDR)
+#define MX1_WDT_BASE_ADDR (0x01000 + MX1_IO_BASE_ADDR)
+#define MX1_TIM1_BASE_ADDR (0x02000 + MX1_IO_BASE_ADDR)
+#define MX1_TIM2_BASE_ADDR (0x03000 + MX1_IO_BASE_ADDR)
+#define MX1_RTC_BASE_ADDR (0x04000 + MX1_IO_BASE_ADDR)
+#define MX1_LCDC_BASE_ADDR (0x05000 + MX1_IO_BASE_ADDR)
+#define MX1_UART1_BASE_ADDR (0x06000 + MX1_IO_BASE_ADDR)
+#define MX1_UART2_BASE_ADDR (0x07000 + MX1_IO_BASE_ADDR)
+#define MX1_PWM_BASE_ADDR (0x08000 + MX1_IO_BASE_ADDR)
+#define MX1_DMA_BASE_ADDR (0x09000 + MX1_IO_BASE_ADDR)
+#define MX1_AIPI2_BASE_ADDR (0x10000 + MX1_IO_BASE_ADDR)
+#define MX1_SIM_BASE_ADDR (0x11000 + MX1_IO_BASE_ADDR)
+#define MX1_USBD_BASE_ADDR (0x12000 + MX1_IO_BASE_ADDR)
+#define MX1_SPI1_BASE_ADDR (0x13000 + MX1_IO_BASE_ADDR)
+#define MX1_MMC_BASE_ADDR (0x14000 + MX1_IO_BASE_ADDR)
+#define MX1_ASP_BASE_ADDR (0x15000 + MX1_IO_BASE_ADDR)
+#define MX1_BTA_BASE_ADDR (0x16000 + MX1_IO_BASE_ADDR)
+#define MX1_I2C_BASE_ADDR (0x17000 + MX1_IO_BASE_ADDR)
+#define MX1_SSI_BASE_ADDR (0x18000 + MX1_IO_BASE_ADDR)
+#define MX1_SPI2_BASE_ADDR (0x19000 + MX1_IO_BASE_ADDR)
+#define MX1_MSHC_BASE_ADDR (0x1A000 + MX1_IO_BASE_ADDR)
+#define MX1_CCM_BASE_ADDR (0x1B000 + MX1_IO_BASE_ADDR)
+#define MX1_SCM_BASE_ADDR (0x1B804 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR)
+#define MX1_EIM_BASE_ADDR (0x20000 + MX1_IO_BASE_ADDR)
+#define MX1_SDRAMC_BASE_ADDR (0x21000 + MX1_IO_BASE_ADDR)
+#define MX1_MMA_BASE_ADDR (0x22000 + MX1_IO_BASE_ADDR)
+#define MX1_AVIC_BASE_ADDR (0x23000 + MX1_IO_BASE_ADDR)
+#define MX1_CSI_BASE_ADDR (0x24000 + MX1_IO_BASE_ADDR)
/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) - IMX_IO_PHYS + IMX_IO_BASE)
-
-/* define macros needed for entry-macro.S */
-#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x)
+#define MX1_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX1_IO))
/* fixed interrput numbers */
-#define INT_SOFTINT 0
-#define CSI_INT 6
-#define DSPA_MAC_INT 7
-#define DSPA_INT 8
-#define COMP_INT 9
-#define MSHC_XINT 10
-#define GPIO_INT_PORTA 11
-#define GPIO_INT_PORTB 12
-#define GPIO_INT_PORTC 13
-#define LCDC_INT 14
-#define SIM_INT 15
-#define SIM_DATA_INT 16
-#define RTC_INT 17
-#define RTC_SAMINT 18
-#define UART2_MINT_PFERR 19
-#define UART2_MINT_RTS 20
-#define UART2_MINT_DTR 21
-#define UART2_MINT_UARTC 22
-#define UART2_MINT_TX 23
-#define UART2_MINT_RX 24
-#define UART1_MINT_PFERR 25
-#define UART1_MINT_RTS 26
-#define UART1_MINT_DTR 27
-#define UART1_MINT_UARTC 28
-#define UART1_MINT_TX 29
-#define UART1_MINT_RX 30
-#define VOICE_DAC_INT 31
-#define VOICE_ADC_INT 32
-#define PEN_DATA_INT 33
-#define PWM_INT 34
-#define SDHC_INT 35
-#define I2C_INT 39
-#define CSPI_INT 41
-#define SSI_TX_INT 42
-#define SSI_TX_ERR_INT 43
-#define SSI_RX_INT 44
-#define SSI_RX_ERR_INT 45
-#define TOUCH_INT 46
-#define USBD_INT0 47
-#define USBD_INT1 48
-#define USBD_INT2 49
-#define USBD_INT3 50
-#define USBD_INT4 51
-#define USBD_INT5 52
-#define USBD_INT6 53
-#define BTSYS_INT 55
-#define BTTIM_INT 56
-#define BTWUI_INT 57
-#define TIM2_INT 58
-#define TIM1_INT 59
-#define DMA_ERR 60
-#define DMA_INT 61
-#define GPIO_INT_PORTD 62
-#define WDT_INT 63
+#define MX1_INT_SOFTINT 0
+#define MX1_CSI_INT 6
+#define MX1_DSPA_MAC_INT 7
+#define MX1_DSPA_INT 8
+#define MX1_COMP_INT 9
+#define MX1_MSHC_XINT 10
+#define MX1_GPIO_INT_PORTA 11
+#define MX1_GPIO_INT_PORTB 12
+#define MX1_GPIO_INT_PORTC 13
+#define MX1_LCDC_INT 14
+#define MX1_SIM_INT 15
+#define MX1_SIM_DATA_INT 16
+#define MX1_RTC_INT 17
+#define MX1_RTC_SAMINT 18
+#define MX1_UART2_MINT_PFERR 19
+#define MX1_UART2_MINT_RTS 20
+#define MX1_UART2_MINT_DTR 21
+#define MX1_UART2_MINT_UARTC 22
+#define MX1_UART2_MINT_TX 23
+#define MX1_UART2_MINT_RX 24
+#define MX1_UART1_MINT_PFERR 25
+#define MX1_UART1_MINT_RTS 26
+#define MX1_UART1_MINT_DTR 27
+#define MX1_UART1_MINT_UARTC 28
+#define MX1_UART1_MINT_TX 29
+#define MX1_UART1_MINT_RX 30
+#define MX1_VOICE_DAC_INT 31
+#define MX1_VOICE_ADC_INT 32
+#define MX1_PEN_DATA_INT 33
+#define MX1_PWM_INT 34
+#define MX1_SDHC_INT 35
+#define MX1_I2C_INT 39
+#define MX1_CSPI_INT 41
+#define MX1_SSI_TX_INT 42
+#define MX1_SSI_TX_ERR_INT 43
+#define MX1_SSI_RX_INT 44
+#define MX1_SSI_RX_ERR_INT 45
+#define MX1_TOUCH_INT 46
+#define MX1_USBD_INT0 47
+#define MX1_USBD_INT1 48
+#define MX1_USBD_INT2 49
+#define MX1_USBD_INT3 50
+#define MX1_USBD_INT4 51
+#define MX1_USBD_INT5 52
+#define MX1_USBD_INT6 53
+#define MX1_BTSYS_INT 55
+#define MX1_BTTIM_INT 56
+#define MX1_BTWUI_INT 57
+#define MX1_TIM2_INT 58
+#define MX1_TIM1_INT 59
+#define MX1_DMA_ERR 60
+#define MX1_DMA_INT 61
+#define MX1_GPIO_INT_PORTD 62
+#define MX1_WDT_INT 63
/* DMA */
-#define DMA_REQ_UART3_T 2
-#define DMA_REQ_UART3_R 3
-#define DMA_REQ_SSI2_T 4
-#define DMA_REQ_SSI2_R 5
-#define DMA_REQ_CSI_STAT 6
-#define DMA_REQ_CSI_R 7
-#define DMA_REQ_MSHC 8
-#define DMA_REQ_DSPA_DCT_DOUT 9
-#define DMA_REQ_DSPA_DCT_DIN 10
-#define DMA_REQ_DSPA_MAC 11
-#define DMA_REQ_EXT 12
-#define DMA_REQ_SDHC 13
-#define DMA_REQ_SPI1_R 14
-#define DMA_REQ_SPI1_T 15
-#define DMA_REQ_SSI_T 16
-#define DMA_REQ_SSI_R 17
-#define DMA_REQ_ASP_DAC 18
-#define DMA_REQ_ASP_ADC 19
-#define DMA_REQ_USP_EP(x) (20 + (x))
-#define DMA_REQ_SPI2_R 26
-#define DMA_REQ_SPI2_T 27
-#define DMA_REQ_UART2_T 28
-#define DMA_REQ_UART2_R 29
-#define DMA_REQ_UART1_T 30
-#define DMA_REQ_UART1_R 31
+#define MX1_DMA_REQ_UART3_T 2
+#define MX1_DMA_REQ_UART3_R 3
+#define MX1_DMA_REQ_SSI2_T 4
+#define MX1_DMA_REQ_SSI2_R 5
+#define MX1_DMA_REQ_CSI_STAT 6
+#define MX1_DMA_REQ_CSI_R 7
+#define MX1_DMA_REQ_MSHC 8
+#define MX1_DMA_REQ_DSPA_DCT_DOUT 9
+#define MX1_DMA_REQ_DSPA_DCT_DIN 10
+#define MX1_DMA_REQ_DSPA_MAC 11
+#define MX1_DMA_REQ_EXT 12
+#define MX1_DMA_REQ_SDHC 13
+#define MX1_DMA_REQ_SPI1_R 14
+#define MX1_DMA_REQ_SPI1_T 15
+#define MX1_DMA_REQ_SSI_T 16
+#define MX1_DMA_REQ_SSI_R 17
+#define MX1_DMA_REQ_ASP_DAC 18
+#define MX1_DMA_REQ_ASP_ADC 19
+#define MX1_DMA_REQ_USP_EP(x) (20 + (x))
+#define MX1_DMA_REQ_SPI2_R 26
+#define MX1_DMA_REQ_SPI2_T 27
+#define MX1_DMA_REQ_UART2_T 28
+#define MX1_DMA_REQ_UART2_R 29
+#define MX1_DMA_REQ_UART1_T 30
+#define MX1_DMA_REQ_UART1_R 31
+
+/*
+ * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS
+ * to not break drivers/usb/gadget/imx_udc. Should go
+ * away after this driver uses the new name.
+ */
+#define USBD_INT0 MX1_USBD_INT0
+
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
+/* these should go away */
+#define IMX_IO_PHYS MX1_IO_BASE_ADDR
+#define IMX_IO_SIZE MX1_IO_SIZE
+#define IMX_IO_BASE MX1_IO_BASE_ADDR_VIRT
+#define IMX_CS0_PHYS MX1_CS0_PHYS
+#define IMX_CS0_SIZE MX1_CS0_SIZE
+#define IMX_CS1_PHYS MX1_CS1_PHYS
+#define IMX_CS1_SIZE MX1_CS1_SIZE
+#define IMX_CS2_PHYS MX1_CS2_PHYS
+#define IMX_CS2_SIZE MX1_CS2_SIZE
+#define IMX_CS3_PHYS MX1_CS3_PHYS
+#define IMX_CS3_SIZE MX1_CS3_SIZE
+#define IMX_CS4_PHYS MX1_CS4_PHYS
+#define IMX_CS4_SIZE MX1_CS4_SIZE
+#define IMX_CS5_PHYS MX1_CS5_PHYS
+#define IMX_CS5_SIZE MX1_CS5_SIZE
+#define AIPI1_BASE_ADDR MX1_AIPI1_BASE_ADDR
+#define WDT_BASE_ADDR MX1_WDT_BASE_ADDR
+#define TIM1_BASE_ADDR MX1_TIM1_BASE_ADDR
+#define TIM2_BASE_ADDR MX1_TIM2_BASE_ADDR
+#define RTC_BASE_ADDR MX1_RTC_BASE_ADDR
+#define LCDC_BASE_ADDR MX1_LCDC_BASE_ADDR
+#define UART1_BASE_ADDR MX1_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX1_UART2_BASE_ADDR
+#define PWM_BASE_ADDR MX1_PWM_BASE_ADDR
+#define DMA_BASE_ADDR MX1_DMA_BASE_ADDR
+#define AIPI2_BASE_ADDR MX1_AIPI2_BASE_ADDR
+#define SIM_BASE_ADDR MX1_SIM_BASE_ADDR
+#define USBD_BASE_ADDR MX1_USBD_BASE_ADDR
+#define SPI1_BASE_ADDR MX1_SPI1_BASE_ADDR
+#define MMC_BASE_ADDR MX1_MMC_BASE_ADDR
+#define ASP_BASE_ADDR MX1_ASP_BASE_ADDR
+#define BTA_BASE_ADDR MX1_BTA_BASE_ADDR
+#define I2C_BASE_ADDR MX1_I2C_BASE_ADDR
+#define SSI_BASE_ADDR MX1_SSI_BASE_ADDR
+#define SPI2_BASE_ADDR MX1_SPI2_BASE_ADDR
+#define MSHC_BASE_ADDR MX1_MSHC_BASE_ADDR
+#define CCM_BASE_ADDR MX1_CCM_BASE_ADDR
+#define SCM_BASE_ADDR MX1_SCM_BASE_ADDR
+#define GPIO_BASE_ADDR MX1_GPIO_BASE_ADDR
+#define EIM_BASE_ADDR MX1_EIM_BASE_ADDR
+#define SDRAMC_BASE_ADDR MX1_SDRAMC_BASE_ADDR
+#define MMA_BASE_ADDR MX1_MMA_BASE_ADDR
+#define AVIC_BASE_ADDR MX1_AVIC_BASE_ADDR
+#define CSI_BASE_ADDR MX1_CSI_BASE_ADDR
+#define IO_ADDRESS(x) MX1_IO_ADDRESS(x)
+#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x)
+#define INT_SOFTINT MX1_INT_SOFTINT
+#define CSI_INT MX1_CSI_INT
+#define DSPA_MAC_INT MX1_DSPA_MAC_INT
+#define DSPA_INT MX1_DSPA_INT
+#define COMP_INT MX1_COMP_INT
+#define MSHC_XINT MX1_MSHC_XINT
+#define GPIO_INT_PORTA MX1_GPIO_INT_PORTA
+#define GPIO_INT_PORTB MX1_GPIO_INT_PORTB
+#define GPIO_INT_PORTC MX1_GPIO_INT_PORTC
+#define LCDC_INT MX1_LCDC_INT
+#define SIM_INT MX1_SIM_INT
+#define SIM_DATA_INT MX1_SIM_DATA_INT
+#define RTC_INT MX1_RTC_INT
+#define RTC_SAMINT MX1_RTC_SAMINT
+#define UART2_MINT_PFERR MX1_UART2_MINT_PFERR
+#define UART2_MINT_RTS MX1_UART2_MINT_RTS
+#define UART2_MINT_DTR MX1_UART2_MINT_DTR
+#define UART2_MINT_UARTC MX1_UART2_MINT_UARTC
+#define UART2_MINT_TX MX1_UART2_MINT_TX
+#define UART2_MINT_RX MX1_UART2_MINT_RX
+#define UART1_MINT_PFERR MX1_UART1_MINT_PFERR
+#define UART1_MINT_RTS MX1_UART1_MINT_RTS
+#define UART1_MINT_DTR MX1_UART1_MINT_DTR
+#define UART1_MINT_UARTC MX1_UART1_MINT_UARTC
+#define UART1_MINT_TX MX1_UART1_MINT_TX
+#define UART1_MINT_RX MX1_UART1_MINT_RX
+#define VOICE_DAC_INT MX1_VOICE_DAC_INT
+#define VOICE_ADC_INT MX1_VOICE_ADC_INT
+#define PEN_DATA_INT MX1_PEN_DATA_INT
+#define PWM_INT MX1_PWM_INT
+#define SDHC_INT MX1_SDHC_INT
+#define I2C_INT MX1_I2C_INT
+#define CSPI_INT MX1_CSPI_INT
+#define SSI_TX_INT MX1_SSI_TX_INT
+#define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT
+#define SSI_RX_INT MX1_SSI_RX_INT
+#define SSI_RX_ERR_INT MX1_SSI_RX_ERR_INT
+#define TOUCH_INT MX1_TOUCH_INT
+#define USBD_INT1 MX1_USBD_INT1
+#define USBD_INT2 MX1_USBD_INT2
+#define USBD_INT3 MX1_USBD_INT3
+#define USBD_INT4 MX1_USBD_INT4
+#define USBD_INT5 MX1_USBD_INT5
+#define USBD_INT6 MX1_USBD_INT6
+#define BTSYS_INT MX1_BTSYS_INT
+#define BTTIM_INT MX1_BTTIM_INT
+#define BTWUI_INT MX1_BTWUI_INT
+#define TIM2_INT MX1_TIM2_INT
+#define TIM1_INT MX1_TIM1_INT
+#define DMA_ERR MX1_DMA_ERR
+#define DMA_INT MX1_DMA_INT
+#define GPIO_INT_PORTD MX1_GPIO_INT_PORTD
+#define WDT_INT MX1_WDT_INT
+#define DMA_REQ_UART3_T MX1_DMA_REQ_UART3_T
+#define DMA_REQ_UART3_R MX1_DMA_REQ_UART3_R
+#define DMA_REQ_SSI2_T MX1_DMA_REQ_SSI2_T
+#define DMA_REQ_SSI2_R MX1_DMA_REQ_SSI2_R
+#define DMA_REQ_CSI_STAT MX1_DMA_REQ_CSI_STAT
+#define DMA_REQ_CSI_R MX1_DMA_REQ_CSI_R
+#define DMA_REQ_MSHC MX1_DMA_REQ_MSHC
+#define DMA_REQ_DSPA_DCT_DOUT MX1_DMA_REQ_DSPA_DCT_DOUT
+#define DMA_REQ_DSPA_DCT_DIN MX1_DMA_REQ_DSPA_DCT_DIN
+#define DMA_REQ_DSPA_MAC MX1_DMA_REQ_DSPA_MAC
+#define DMA_REQ_EXT MX1_DMA_REQ_EXT
+#define DMA_REQ_SDHC MX1_DMA_REQ_SDHC
+#define DMA_REQ_SPI1_R MX1_DMA_REQ_SPI1_R
+#define DMA_REQ_SPI1_T MX1_DMA_REQ_SPI1_T
+#define DMA_REQ_SSI_T MX1_DMA_REQ_SSI_T
+#define DMA_REQ_SSI_R MX1_DMA_REQ_SSI_R
+#define DMA_REQ_ASP_DAC MX1_DMA_REQ_ASP_DAC
+#define DMA_REQ_ASP_ADC MX1_DMA_REQ_ASP_ADC
+#define DMA_REQ_USP_EP(x) MX1_DMA_REQ_USP_EP(x)
+#define DMA_REQ_SPI2_R MX1_DMA_REQ_SPI2_R
+#define DMA_REQ_SPI2_T MX1_DMA_REQ_SPI2_T
+#define DMA_REQ_UART2_T MX1_DMA_REQ_UART2_T
+#define DMA_REQ_UART2_R MX1_DMA_REQ_UART2_R
+#define DMA_REQ_UART1_T MX1_DMA_REQ_UART1_T
+#define DMA_REQ_UART1_R MX1_DMA_REQ_UART1_R
+#endif /* ifdef IMX_NEEDS_DEPRECATED_SYMBOLS */
#endif /* ifndef __MACH_MX1_H__ */
--
1.6.6
More information about the linux-arm-kernel
mailing list