[PATCH 4/8] mxc91231: use MXC91231_IO_ADDRESS instead of MXC91231_AIPS1_IO_ADDRESS

[Uwe Kleine-König]

Apart from MXC91231_IO_ADDRESS itself this was the only usage of
MXC91231_AIPS1_IO_ADDRESS.  Now MXC91231_IO_ADDRESS can be recoded with
IMX_IO_ADDRESS and all helper macros can go away.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Cc: Sascha Hauer <kernel at pengutronix.de>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Daniel Schaeffer <daniel.schaeffer at timesys.com>
Cc: Alberto Panizzo <maramaopercheseimorto at gmail.com>
Cc: Ivo Clarysse <ivo.clarysse at gmail.com>
---
 arch/arm/plat-mxc/include/mach/debug-macro.S |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 21e0f07..916d4fc 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -51,7 +51,7 @@
 #endif
 #include <mach/mxc91231.h>
 #define UART_PADDR	MXC91231_UART2_BASE_ADDR
-#define UART_VADDR	MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
+#define UART_VADDR	MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
 #endif
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
-- 
1.6.6