[PATCH 4/8] i.MX35: Add USB control register access support

[Sascha Hauer]

On Thu, Feb 04, 2010 at 05:02:40PM +0100, Enrico Scholz wrote:
> Sascha Hauer <s.hauer at pengutronix.de> writes:
> 
> > +#define MX35_OTG_IPPUE_UP_BIT	(1 << 7)
> > +#define MX35_OTG_IPPUE_DOWN_BIT	(1 << 6)
> > ...
> > +#define MX35_OTG_USBTE_BIT	(1 << 4)
> 
> Why are these bits called '_OTG_'?  They are applied in the 'H1 port'
> case and reference manual mentions them only for the USB host part.

You're right. Will fix

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |