[PXA320] How to find I/O registers, base address of ASIX ethernet chip?

[Dennis Semakin]

Dear Daniel
Thank you very much for code. It works fine.
If you will be in Moscow, I'll buy you a pints of beer :)

It is necessary to ask only: why in u-boot git-repository I didn't see this code?

08.02.10, 11:15, "Daniel Mack" <daniel at caiaq.de>:

> On Mon, Feb 08, 2010 at 12:38:06PM +0300, Dennis Semakin wrote:
>  > 08.02.10, 10:13, "Uwe Kleine-König" :
>  > >  This sounds like a missing clock.  Ah, and Daniel already asked that,
>  > >  too: "Did you switch on the clock for the static bus?"
>  > >  
>  > 
>  > Well... I yet do not know how to do this...
>  
>  Try adding this sniplet to your lowlevel_init function in U-Boot:
>  
>          /* enable clocks for NAND and static memory */
>          ldr             r0, =CKENA
>          ldr             r1, [r0]
>          orr             r1, r1, #(CKENA_4_NAND | CKENA_9_SMC)
>          str             r1, [r0]
>          ldr             r1, [r0]
>  
>  Daniel
>  

Thanks
Best regards
Dennis Semakin