January 2023 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Jan 3 13:54:48 PST 2023
Ending: Tue Jan 31 21:33:34 PST 2023
Messages: 429

• [PATCH] Documentation: i.MX8M: add EVK barebox installation documentation   Ahmad Fatoum
• [PATCH] mci: sdhci: arasan: fix probing eMMC without no-sd   Ahmad Fatoum
• arasan-sdhci eMMC Problem 'command timeout'   Ahmad Fatoum
• [PATCH] fixup! Documentation: i.MX8M: add EVK barebox installation documentation   Ahmad Fatoum
• [PATCH] ARM: asm: simplify arm_mem_stack_top   Ahmad Fatoum
• [PATCH 6/6] ARM: configs: imx_v7_defconfig: enable some useful options   Ahmad Fatoum
• [PATCH master 1/3] driver: have dev_name(unregistered device) behave as expected   Ahmad Fatoum
• [PATCH master 2/3] efi: acpi: add SDT resource before registering device   Ahmad Fatoum
• [PATCH master 3/3] reset: core: support deep probe with resets registered in CLK_OF_DECLARE   Ahmad Fatoum
• [PATCH 1/3] fixup! Rename device_d::device_node to device_d::of_node   Ahmad Fatoum
• [PATCH 2/3] fixup! Rename struct device_d to device   Ahmad Fatoum
• [PATCH 3/3] fixup! Rename struct driver_d to driver   Ahmad Fatoum
• [PATCH v2 00/11] ARM: at91: sama5d4: add basic Wifx L1 support   Ahmad Fatoum
• [PATCH v2 01/11] ARM: at91: sama5: switch to nonnaked entry functions   Ahmad Fatoum
• [PATCH v2 02/11] ARM: at91: sama5d4: add entry point helpers   Ahmad Fatoum
• [PATCH v2 03/11] ARM: at91: sama5d4: enable for DT use   Ahmad Fatoum
• [PATCH v2 04/11] net: macb: match atmel,sama5d4-gem compatible   Ahmad Fatoum
• [PATCH v2 05/11] i2c: at91: extend for SAMA5D4 support   Ahmad Fatoum
• [PATCH v2 06/11] eeprom: at24: add 24mac402/602 support   Ahmad Fatoum
• [PATCH v2 07/11] driver: always ensure probe of RAM registered with mem_platform_driver   Ahmad Fatoum
• [PATCH v2 08/11] common: deep-probe: don't build without CONFIG_OFDEVICE   Ahmad Fatoum
• [PATCH v2 09/11] pinctrl: at91: make deep-probe compatible   Ahmad Fatoum
• [PATCH v2 10/11] ARM: at91: make bootsource code generic to all SAMA5   Ahmad Fatoum
• [PATCH v2 11/11] ARM: at91: SAMA5D4: add Wifx L1 support   Ahmad Fatoum
• [PATCH] mtd: consult CONFIG_OFDEVICE in mtd_get_of_node   Ahmad Fatoum
• [PATCH 0/7] treewide: misc helpers for porting   Ahmad Fatoum
• [PATCH 1/7] vsprintf: support %pOF format specifier   Ahmad Fatoum
• [PATCH 2/7] include: driver: make dev_(get_priv|is_probed) argument const pointer   Ahmad Fatoum
• [PATCH 3/7] include: sync io-64-nonatomic-*.h headers with Linux   Ahmad Fatoum
• [PATCH 4/7] clk: add prepare/unprepare helpers   Ahmad Fatoum
• [PATCH 5/7] of: provide of_node_get and of_node_put stubs   Ahmad Fatoum
• [PATCH 6/7] include: linux/slab.h: define krealloc/kstrdup   Ahmad Fatoum
• [PATCH 7/7] barebox-wrapper: define MODULE_DEVICE_TABLE   Ahmad Fatoum
• [PATCH] regulator: scmi: rename struct scmi_regulator::device_node to of_node   Ahmad Fatoum
• [PATCH] driver: add of_match_table as alias to of_compatible   Ahmad Fatoum
• [PATCH 1/4] of: gpio: include <of.h> in <of_gpio.h>   Ahmad Fatoum
• [PATCH 2/4] gpiolib: use signed int for gpio in gpiod_set_value   Ahmad Fatoum
• [PATCH 3/4] gpiolib: implement dev_gpiod_get_index   Ahmad Fatoum
• [PATCH 4/4] gpiolib: implement gpiod_get_value   Ahmad Fatoum
• [PATCH] include: linux/iopoll.h: silence warning when timeout_us contains *   Ahmad Fatoum
• [PATCH] asm-generic: define IOMEM for assembly as well   Ahmad Fatoum
• [PATCH] regulator: rk808: simplify one error branch with dev_err_probe   Ahmad Fatoum
• [PATCH] ARM: rockchip: make ATF installation optional   Ahmad Fatoum
• [PATCH] fixup! include: linux/iopoll.h: silence warning when timeout_us contains *   Ahmad Fatoum
• [PATCH 0/4] lib: add jsmn JSON parser   Ahmad Fatoum
• [PATCH 1/4] lib: add jsmn JSON parser support   Ahmad Fatoum
• [PATCH 2/4] lib: extend jsmn with simple JSONPath lookup helpers   Ahmad Fatoum
• [PATCH 3/4] vsprintf: implement %pJP for printing JSONPaths   Ahmad Fatoum
• [PATCH 4/4] test: self: add json parser test   Ahmad Fatoum
• [PATCH master] nvmem: ocotp: decouple featctrl from barebox,provide-mac-address   Ahmad Fatoum
• [PATCH master] i2c: imx: increase timeout in i2c_fsl_poll_status from 1 to 5ms   Ahmad Fatoum
• [PATCH 1/2] net: dsa: ksz9477: fix confusing message detecting KSZ9893 compatible   Ahmad Fatoum
• [PATCH 2/2] net: dsa: ksz9477: match microchip,ksz8563 compatible   Ahmad Fatoum
• [PATCH] usb: dwc2: fix multiplier handling in endpoint setup   Ahmad Fatoum
• [PATCH] net: designware: eqos: implement set_promisc callback   Ahmad Fatoum
• [PATCH] include: linux/iopoll.h: silence warning when timeout_us contains *   Ahmad Fatoum
• [PATCH] net: e1000: don't use nanosecond constants in readl_poll_timeout   Ahmad Fatoum
• [PATCH] usb: dwc2: fix multiplier handling in endpoint setup   Ahmad Fatoum
• [PATCH] ARM: switch open-coded instances to platform_mem_driver   Ahmad Fatoum
• [PATCH] pinctrl: stm32: fix pinctrl/gpio dependency ordering   Ahmad Fatoum
• [PATCH 1/2] net: bcmgenet: fix warning when building for 32-bit   Ahmad Fatoum
• [PATCH 2/2] ARM: rpi: defconfig: enable Raspberry Pi 4 drivers in 32-bit config   Ahmad Fatoum
• [PATCH] ARM: rpi: parse memory from vc fdt   Ahmad Fatoum
• [PATCH] fixup! ARM: switch open-coded instances to platform_mem_driver   Ahmad Fatoum
• [PATCH v2] include: linux/iopoll.h: silence warning when timeout_us contains *   Ahmad Fatoum
• [PATCH] ARM: i.MX8M: bootrom: access OCRAM directly if running in EL3   Ahmad Fatoum
• [PATCH 0/7] ARM: i.MX8M: add optional CAAM init in PBL   Ahmad Fatoum
• [PATCH 1/7] ARM: i.MX8M: bootrom: access OCRAM directly if running in EL3   Ahmad Fatoum
• [PATCH 2/7] crypto: caam - sync 64-bit accessors with Linux   Ahmad Fatoum
• [PATCH 3/7] crypto: caam - add job ring accessors from Linux   Ahmad Fatoum
• [PATCH 4/7] crypto: caam - make command constants unsigned   Ahmad Fatoum
• [PATCH 5/7] crypto: caam - implement early PBL init   Ahmad Fatoum
• [PATCH 6/7] common: add new CONFIG_HAVE_OPTEE symbol   Ahmad Fatoum
• [PATCH 7/7] ARM: i.MX8M: init CAAM when CONFIG_FSL_CAAM_RNG_PBL_INIT   Ahmad Fatoum
• [PATCH 00/11] net: dsa: ksz9477: use regmap to add I2C support next to SPI   Ahmad Fatoum
• [PATCH 01/11] regmap: consolidate reg/val format into regmap_format   Ahmad Fatoum
• [PATCH 02/11] regmap: support formatted read and write   Ahmad Fatoum
• [PATCH 03/11] regmap: port regmap_init_spi   Ahmad Fatoum
• [PATCH 04/11] regmap: factor out regmap cdev size calculation   Ahmad Fatoum
• [PATCH 05/11] net: dsa: ksz9477: switch to regmap_init_spi   Ahmad Fatoum
• [PATCH 06/11] net: dsa: ksz9477: create regmap cdev for switch registers   Ahmad Fatoum
• [PATCH 07/11] drivers: base: regmap: introduce REGMAP_I2C   Ahmad Fatoum
• [PATCH 08/11] dev: add dev_bus_is_spi/i2c helpers   Ahmad Fatoum
• [PATCH 09/11] net: dsa: ksz9477: refactor to prepare i2c support   Ahmad Fatoum
• [PATCH 10/11] regmap: i2c: use formatted I/O   Ahmad Fatoum
• [PATCH 11/11] net: ksz9477: add I2C support   Ahmad Fatoum
• [PATCH v2] ARM: switch open-coded instances to platform_mem_driver   Ahmad Fatoum
• [PATCH 06/11] net: dsa: ksz9477: create regmap cdev for switch registers   Ahmad Fatoum
• [PATCH v2] ARM: rpi: parse memory from vc fdt   Ahmad Fatoum
• [PATCH v2 1/1] ARM: i.MX8M: add PCA9450 PMIC on rev-b EVK   Ahmad Fatoum
• [PATCH v2 1/1] ARM: i.MX8M: fix typo in function call   Ahmad Fatoum
• [PATCH v2 1/1] ARM: i.MX8M: smccc: fix firmware_atf check   Ahmad Fatoum
• [PATCH v2 1/1] ARM: i.MX8M: add PCA9450 PMIC on rev-b EVK   Ahmad Fatoum
• [PATCH v3] ARM: i.MX8M: separate function call for clock_init   Ahmad Fatoum
• [PATCH v4] ARM: rpi: parse memory from vc fdt   Ahmad Fatoum
• [PATCH v4] ARM: i.MX8M: separate function call for clock_init   Ahmad Fatoum
• [PATCH] driver: drop no longer used RW_SIZE/_MASK macros   Ahmad Fatoum
• [PATCH v2 00/11] net: dsa: ksz9477: use regmap to add I2C support next to SPI   Ahmad Fatoum
• [PATCH v2 01/11] regmap: consolidate reg/val format into regmap_format   Ahmad Fatoum
• [PATCH v2 02/11] regmap: support formatted read and write   Ahmad Fatoum
• [PATCH v2 03/11] regmap: port regmap_init_spi   Ahmad Fatoum
• [PATCH v2 04/11] regmap: factor out regmap cdev size calculation   Ahmad Fatoum
• [PATCH v2 05/11] net: dsa: ksz9477: switch to regmap_init_spi   Ahmad Fatoum
• [PATCH v2 06/11] net: dsa: ksz9477: create regmap cdev for switch registers   Ahmad Fatoum
• [PATCH v2 07/11] drivers: base: regmap: introduce REGMAP_I2C   Ahmad Fatoum
• [PATCH v2 08/11] dev: add dev_bus_is_spi/i2c helpers   Ahmad Fatoum
• [PATCH v2 09/11] net: dsa: ksz9477: refactor to prepare i2c support   Ahmad Fatoum
• [PATCH v2 10/11] regmap: i2c: use formatted I/O   Ahmad Fatoum
• [PATCH v2 11/11] net: ksz9477: add I2C support   Ahmad Fatoum
• [PATCH v2 1/2] ARM: i.MX8M: bootrom-cmd: clean up pointer casting   Ahmad Fatoum
• [PATCH v2 2/2] ARM: i.MX8M: bootrom: access OCRAM directly if running in EL3   Ahmad Fatoum
• [PATCH v3 1/2] ARM: at91: sama5d4: enable for DT use   Ahmad Fatoum
• [PATCH v3 2/2] ARM: at91: make bootsource code generic to all SAMA5   Ahmad Fatoum
• [PATCH v2] mtd: consult CONFIG_OFDEVICE in mtd_get_of_node   Ahmad Fatoum
• [PATCH 1/2] mci: atmel_mci: fix off-by-1000 in poll timeout   Ahmad Fatoum
• [PATCH 2/2] mci: atmel_mci: don't print error messages when probing SDIO   Ahmad Fatoum
• [PATCH 00/15] mtd: nand: atmel: import Linux NAND controller driver   Ahmad Fatoum
• [PATCH 01/15] asm-generic: io.h: sync with Linux   Ahmad Fatoum
• [PATCH 02/15] mtd: nand: base: implement nand_gpio_waitrdy   Ahmad Fatoum
• [PATCH 03/15] mtd: nand: prefix enum nand_ecc_algo constants with NAND_ECC_ALGO_   Ahmad Fatoum
• [PATCH 04/15] mtd: nand: rename nand_device::eccreq to Linux' ecc.requirements   Ahmad Fatoum
• [PATCH 05/15] mtd: nand: define nand_get_(small|large)_page_ooblayout   Ahmad Fatoum
• [PATCH 06/15] mtd: nand: define nand_interface_is_sdr   Ahmad Fatoum
• [PATCH 07/15] mtd: nand: provide Linux' struct nand_ecc_ctrl::engine_type   Ahmad Fatoum
• [PATCH 08/15] driver: implement dev_request_resource   Ahmad Fatoum
• [PATCH 09/15] lib: provide stub Linux "generic" allocator API   Ahmad Fatoum
• [PATCH 10/15] memory: add Atmel EBI driver   Ahmad Fatoum
• [PATCH 11/15] mfd: add atmel-smc driver   Ahmad Fatoum
• [PATCH 12/15] mtd: nand: atmel: import Linux NAND controller driver   Ahmad Fatoum
• [PATCH 13/15] ARM: AT91: sama5d3_xplained: switch to upstream binding   Ahmad Fatoum
• [PATCH 14/15] mtd: nand: drop DT support in legacy driver   Ahmad Fatoum
• [PATCH 15/15] ARM: AT91: sama5d3: always read memory size from controller   Ahmad Fatoum
• [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location   Ahmad Fatoum
• [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location   Ahmad Fatoum
• [PATCH] firmware: Kconfig: unify whitespace used for indentation   Ahmad Fatoum
• [PATCH v4] ARM: i.MX8M: smccc: allow SIP_BUILDINFO call on all imx8m variants   Ahmad Fatoum
• [PATCH 3/3] net: eqos: add i.MX8MP support   Ahmad Fatoum
• [PATCH] state: backend: direct: open backend in read-only mode if possible   Ahmad Fatoum
• [RFT PATCH] ARM: stm32mp: odyssey-som: use upstream device trees   Ahmad Fatoum
• [PATCH] of: implement of_device_enable_by_alias   Ahmad Fatoum
• [PATCH 1/3] of: platform: call struct device::detect in of_device_create_on_demand   Ahmad Fatoum
• [PATCH 2/3] i2c: write debug print when registering any i2c client   Ahmad Fatoum
• [PATCH 3/3] i2c: implement detect callback   Ahmad Fatoum
• [PATCH 0/9] net: dsa: add Realtek (rtl8365mb/rtl8366rb) switch support   Ahmad Fatoum
• [PATCH 1/9] driver: alias of_match_ptr and DRV_OF_COMPAT   Ahmad Fatoum
• [PATCH 2/9] gpiolib: implement gpio_direction_input/output   Ahmad Fatoum
• [PATCH 3/9] net: dsa: rename dsa_ops to dsa_switch_ops   Ahmad Fatoum
• [PATCH 4/9] net: dsa: factor out dsa_port_alloc helper   Ahmad Fatoum
• [PATCH 5/9] net: dsa: populate struct dsa_port::index/dev members   Ahmad Fatoum
• [PATCH 6/9] net: dsa: always call port_pre_enable before port_enable   Ahmad Fatoum
• [PATCH 7/9] net: dsa: add some helpers to ease porting kernel drivers   Ahmad Fatoum
• [PATCH 8/9] net: dsa: add struct dsa_switch::priv member for driver use   Ahmad Fatoum
• [PATCH 9/9] net: dsa: add Realtek (rtl8365mb/rtl8366rb) switch support   Ahmad Fatoum
• [PATCH] net: eth: skip opening disabled interfaces when going interactive   Ahmad Fatoum
• [RFT PATCH] ARM: stm32mp: odyssey-som: use upstream device trees   Ahmad Fatoum
• [PATCH 3/3] arm: rockchip_v8_defconfig: Disable PIO mode for MCI_DW   Ahmad Fatoum
• [PATCH 1/2] imx6-mmdc: Work around ERR050070   Ahmad Fatoum
• [PATCH 2/2] imx6-mmdc: Revert calibration configuration on failure   Ahmad Fatoum
• [PATCH 1/2] imx6-mmdc: Work around ERR050070   Ahmad Fatoum
• [PATCH 2/2] imx6-mmdc: Revert calibration configuration on failure   Ahmad Fatoum
• [PATCH] i2c: implement detect callback for virtual adapter device as well   Ahmad Fatoum
• [PATCH master 1/2] net: dsa: realtek: support enabling only one of the drivers   Ahmad Fatoum
• [PATCH master 2/2] net: dsa: ksz8873: fix mismatched return value   Ahmad Fatoum
• [PATCH] i2c: implement detect callback for virtual adapter device as well   Ahmad Fatoum
• [RFC PATCH 1/2] net: ifup: prefer interfaces where the link is already up   Ahmad Fatoum
• [RFC PATCH 2/2] net: ifup: have ifup -a stop at the first interface   Ahmad Fatoum
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   Ahmad Fatoum
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   Ahmad Fatoum
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   Ahmad Fatoum
• [PATCH] ARM: add DEBUG_LL support for ARM64 QEMU Virt   Ahmad Fatoum
• [PATCH] mfd: add regmap driver for rohm-bd718x7   Ahmad Fatoum
• [PATCH v2 0/3] net: ifup: greatly reduce ifup -a time for multiple network interface   Ahmad Fatoum
• [PATCH v2 1/3] net: ifup: have ifup -a poll for link up in parallel   Ahmad Fatoum
• [PATCH v2 2/3] net: ifup: have ifup -a1 stop at first DHCP-set global.net.server   Ahmad Fatoum
• [PATCH v2 3/3] defaultenv-2: automount: use ifup -a1 for NFS/TFTP automounts   Ahmad Fatoum
• [PATCH] ARM: i.MX8MM: innocomm-wb15: use revised PMIC settings   Ahmad Fatoum
• [PATCH v2 0/4] video: add support for QEMU ramfb   Ahmad Fatoum
• [PATCH v2 1/4] fs: devfs: implement cdev_fdopen   Ahmad Fatoum
• [PATCH v2 2/4] asm-generic: avoid compiler warnings due to PCI_IOBASE   Ahmad Fatoum
• [PATCH v2 3/4] firmware: add QEMU FW CFG driver   Ahmad Fatoum
• [PATCH v2 4/4] video: add support for QEMU ramfb   Ahmad Fatoum
• [PATCH] net: phy: remove duplicate definition of PHY_AN_TIMEOUT   Ahmad Fatoum
• [PATCH v2 1/1] ARM: i.MX8M: add PCA9450 PMIC on rev-b EVK   Marco Felsch
• [PATCH v3 1/2] ARM: i.MX8MM: split barebox dts into dtsi file   Marco Felsch
• [PATCH v3 2/2] ARM: i.MX8MM: add support for 8MMINILPD4-CPU2 board   Marco Felsch
• [PATCH 1/7] I2C: i.MX: Add early i2c support for i.MX6   Marco Felsch
• [PATCH] gpio: Fix unused variable warning   Marco Felsch
• [PATCH 1/2] i2c: i.MX: Use better error code when bus recovery failed   Marco Felsch
• [PATCH 2/2] i2c: Make i2c_recover_bus() to return -EBUSY if bus recovery unimplemented   Marco Felsch
• [PATCH] i2c: implement detect callback for virtual adapter device as well   Marco Felsch
• [PATCH] i2c: i.MX: Use initialized dev for dev_dbg()   Marco Felsch
• [PATCH] ddr_spd: remove unused local variable   Marco Felsch
• [PATCH v2 1/4] ARM: novena: Add Kosagi Novena board   Marco Felsch
• [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration   Marco Felsch
• [PATCH v2 3/4] ARM: novena: Read Ethernet MAC address from EEPROM   Marco Felsch
• [PATCH v2 3/4] ARM: novena: Read Ethernet MAC address from EEPROM   Marco Felsch
• [PATCH v2 1/4] ARM: novena: Add Kosagi Novena board   Marco Felsch
• [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration   Marco Felsch
• [PATCH] ARM: i.MX6: Specify OCRAM base address and size   Marco Felsch
• [PATCH v2] ARM: i.MX6: Specify OCRAM base address and size   Marco Felsch
• [PATCH v3 3/4] ARM: novena: Read Ethernet MAC address from EEPROM   Marco Felsch
• [PATCH v3 1/4] ARM: novena: Add Kosagi Novena board   Marco Felsch
• [PATCH v3 4/4] ARM: novena: Use DDR3 information from SPD EEPROM   Marco Felsch
• [PATCH 1/2] net: ks8851_mll: drop platform_device usage   Marco Felsch
• [PATCH 2/2] spi: atmel-quadspi: remove struct platform_device usage   Marco Felsch
• [PATCH v3 3/4] ARM: novena: Read Ethernet MAC address from EEPROM   Marco Felsch
• [PATCH v3 1/4] ARM: novena: Add Kosagi Novena board   Marco Felsch
• [PATCH] usb: dwc2: fix multiplier handling in endpoint setup   Michael Grzeschik
• [PATCH] usb: dwc2: fix multiplier handling in endpoint setup   Michael Grzeschik
• [PATCH v2 1/2] ARM: dts: stm32mp15x: adjust USB OTG gadget tx fifo sizes   Michael Grzeschik
• [PATCH v2 2/2] usb: dwc2: fix multiplier handling in endpoint setup   Michael Grzeschik
• [PATCH] usb: dwc2: fix multiplier handling in endpoint setup   Michael Grzeschik
• [PATCH] phy: stm32-usphyc: add mdelay(1) to fix timeout on some machines   Michael Grzeschik
• [PATCH v2] phy: stm32-usphyc: add mdelay(1) to fix timeout on some machines   Michael Grzeschik
• [PATCH] ARM: asm: simplify arm_mem_stack_top   Sascha Hauer
• [PATCH] mci: sdhci: arasan: fix probing eMMC without no-sd   Sascha Hauer
• [PATCH] Documentation: i.MX8M: add EVK barebox installation documentation   Sascha Hauer
• [PATCH v2] ARM: dts: fix wrong display-timings native-mode binding   Sascha Hauer
• [PATCH] video: vpl: don't print only skipped vpl endpoints   Sascha Hauer
• [PATCH 6/6] ARM: configs: imx_v7_defconfig: enable some useful options   Sascha Hauer
• [PATCH 6/6] ARM: configs: imx_v7_defconfig: enable some useful options   Sascha Hauer
• [PATCH] common: deep-probe: write deep probe enabled message to log   Sascha Hauer
• [PATCH v2] of: partition: moan if adding a partition failed   Sascha Hauer
• [PATCH master 1/3] driver: have dev_name(unregistered device) behave as expected   Sascha Hauer
• [PATCH 1/2] net: dsa: ksz9477: fix confusing message detecting KSZ9893 compatible   Sascha Hauer
• [PATCH master] i2c: imx: increase timeout in i2c_fsl_poll_status from 1 to 5ms   Sascha Hauer
• [PATCH master] nvmem: ocotp: decouple featctrl from barebox,provide-mac-address   Sascha Hauer
• [PATCH] ARM: rockchip: make ATF installation optional   Sascha Hauer
• [PATCH] regulator: rk808: simplify one error branch with dev_err_probe   Sascha Hauer
• [PATCH] asm-generic: define IOMEM for assembly as well   Sascha Hauer
• [PATCH] include: linux/iopoll.h: silence warning when timeout_us contains *   Sascha Hauer
• [PATCH] fixup! include: linux/iopoll.h: silence warning when timeout_us contains *   Sascha Hauer
• [PATCH 1/3] fixup! Rename device_d::device_node to device_d::of_node   Sascha Hauer
• [PATCH 1/4] of: gpio: include <of.h> in <of_gpio.h>   Sascha Hauer
• [PATCH] driver: add of_match_table as alias to of_compatible   Sascha Hauer
• [PATCH] regulator: scmi: rename struct scmi_regulator::device_node to of_node   Sascha Hauer
• [PATCH 0/7] treewide: misc helpers for porting   Sascha Hauer
• [PATCH] mtd: consult CONFIG_OFDEVICE in mtd_get_of_node   Sascha Hauer
• [PATCH v2 00/11] ARM: at91: sama5d4: add basic Wifx L1 support   Sascha Hauer
• [PATCH 0/4] lib: add jsmn JSON parser   Sascha Hauer
• [PATCH 1/3] mci: Add more respone types   Sascha Hauer
• [PATCH 2/3] mci: handle SDIO cards gracefully   Sascha Hauer
• [PATCH 3/3] ARM: dts: rpi3: Enable sdhci controller   Sascha Hauer
• [PATCH] include: linux/iopoll.h: silence warning when timeout_us contains *   Sascha Hauer
• [PATCH] fixup! ARM: switch open-coded instances to platform_mem_driver   Sascha Hauer
• [PATCH v2] include: linux/iopoll.h: silence warning when timeout_us contains *   Sascha Hauer
• [PATCH] pinctrl: stm32: fix pinctrl/gpio dependency ordering   Sascha Hauer
• [PATCH 1/2] net: bcmgenet: fix warning when building for 32-bit   Sascha Hauer
• [PATCH] ARM: i.MX8M: bootrom: access OCRAM directly if running in EL3   Sascha Hauer
• [PATCH v2] ARM: switch open-coded instances to platform_mem_driver   Sascha Hauer
• [PATCH] ARM: rpi: parse memory from vc fdt   Sascha Hauer
• [PATCH 06/11] net: dsa: ksz9477: create regmap cdev for switch registers   Sascha Hauer
• [PATCH 0/7] ARM: i.MX8M: add optional CAAM init in PBL   Sascha Hauer
• [PATCH] net: e1000: don't use nanosecond constants in readl_poll_timeout   Sascha Hauer
• [PATCH v2 03/11] ARM: at91: sama5d4: enable for DT use   Sascha Hauer
• [PATCH] firmware: Kconfig: unify whitespace used for indentation   Sascha Hauer
• [PATCH 09/15] lib: provide stub Linux "generic" allocator API   Sascha Hauer
• [PATCH 00/15] mtd: nand: atmel: import Linux NAND controller driver   Sascha Hauer
• [PATCH 1/2] mci: atmel_mci: fix off-by-1000 in poll timeout   Sascha Hauer
• [PATCH v2] mtd: consult CONFIG_OFDEVICE in mtd_get_of_node   Sascha Hauer
• [PATCH v3 1/2] ARM: at91: sama5d4: enable for DT use   Sascha Hauer
• [PATCH v2 1/2] ARM: i.MX8M: bootrom-cmd: clean up pointer casting   Sascha Hauer
• [PATCH v2 00/11] net: dsa: ksz9477: use regmap to add I2C support next to SPI   Sascha Hauer
• [PATCH v4] ARM: i.MX8M: separate function call for clock_init   Sascha Hauer
• [PATCH v4] ARM: i.MX8M: smccc: allow SIP_BUILDINFO call on all imx8m variants   Sascha Hauer
• [PATCH] driver: drop no longer used RW_SIZE/_MASK macros   Sascha Hauer
• [PATCH] ARM: dts: remove duplicate reserved-memory nodes   Sascha Hauer
• [PATCH v1 1/8] ARM: imx6sx: udoo-neo: port to driver model   Sascha Hauer
• [PATCH] ddr_spd: use unsigned type for crc bytes in DDR3/4 SPD check   Sascha Hauer
• [PATCH] net: e1000: read EEPROM through EERD register on 8257x adapters   Sascha Hauer
• [PATCH] state: backend: direct: open backend in read-only mode if possible   Sascha Hauer
• [PATCH] of: implement of_device_enable_by_alias   Sascha Hauer
• [PATCH 1/3] of: platform: call struct device::detect in of_device_create_on_demand   Sascha Hauer
• [PATCH] net: eth: skip opening disabled interfaces when going interactive   Sascha Hauer
• v2023.01.0   Sascha Hauer
• [RFT PATCH] ARM: stm32mp: odyssey-som: use upstream device trees   Sascha Hauer
• [PATCH 0/9] net: dsa: add Realtek (rtl8365mb/rtl8366rb) switch support   Sascha Hauer
• [PATCH 1/3] Documentation: Rockchip: Update documentation to latest binaries   Sascha Hauer
• [PATCH 2/3] arm: rockchip: oldconfig rockchip_v8_defconfig   Sascha Hauer
• [PATCH 3/3] arm: rockchip_v8_defconfig: Disable PIO mode for MCI_DW   Sascha Hauer
• [PATCH] spi: Fix probing SPI drivers without a cs-gpios node   Sascha Hauer
• [PATCH 1/5] ARM: novena: Add Kosagi Novena board   Sascha Hauer
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   Sascha Hauer
• [PATCH 3/3] arm: rockchip_v8_defconfig: Disable PIO mode for MCI_DW   Sascha Hauer
• [PATCH 0/7] Support generating DIMM parameters on more systems   Sascha Hauer
• [PATCH 1/2] i2c: i.MX: Use better error code when bus recovery failed   Sascha Hauer
• [PATCH 2/2] i2c: Make i2c_recover_bus() to return -EBUSY if bus recovery unimplemented   Sascha Hauer
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   Sascha Hauer
• [PATCH v3 1/2] ARM: i.MX8MM: split barebox dts into dtsi file   Sascha Hauer
• [PATCH] gpio: Fix unused variable warning   Sascha Hauer
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   Sascha Hauer
• [PATCH master 1/2] net: dsa: realtek: support enabling only one of the drivers   Sascha Hauer
• [PATCH] i2c: i.MX: Use initialized dev for dev_dbg()   Sascha Hauer
• [PATCH 1/2] i2c: i.MX: Use better error code when bus recovery failed   Sascha Hauer
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   Sascha Hauer
• [PATCH v2 1/2] imx6-mmdc: Work around ERR050070   Sascha Hauer
• [PATCH v2 1/4] ARM: novena: Add Kosagi Novena board   Sascha Hauer
• [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration   Sascha Hauer
• [PATCH v2] spi: Fix probing SPI drivers with no cs-gpios   Sascha Hauer
• [PATCH] phy: stm32-usphyc: add mdelay(1) to fix timeout on some machines   Sascha Hauer
• [PATCH v2] phy: stm32-usphyc: add mdelay(1) to fix timeout on some machines   Sascha Hauer
• [PATCH] ddr_spd: remove unused local variable   Sascha Hauer
• [PATCH] i2c: implement detect callback for virtual adapter device as well   Sascha Hauer
• [RFC PATCH 1/2] net: ifup: prefer interfaces where the link is already up   Sascha Hauer
• [RFC PATCH 2/2] net: ifup: have ifup -a stop at the first interface   Sascha Hauer
• [PATCH 1/3] nvmem: ocotp: add support for second MAC address on i.MX8MP   Sascha Hauer
• [PATCH v2] ARM: i.MX6: Specify OCRAM base address and size   Sascha Hauer
• [PATCH v2] ARM: i.MX6: Specify OCRAM base address and size   Sascha Hauer
• [PATCH] I2C: i.MX: early: Use internal udelay   Sascha Hauer
• [PATCH] I2C: i.MX: early: Use internal udelay   Sascha Hauer
• [PATCH] I2C: i.MX: early: Use internal udelay   Sascha Hauer
• [PATCH] I2C: i.MX: early: Use internal udelay   Sascha Hauer
• [PATCH] I2C: i.MX: early: Use internal udelay   Sascha Hauer
• [PATCH 1/2] net: ks8851_mll: drop platform_device usage   Sascha Hauer
• [PATCH] net: phy: remove duplicate definition of PHY_AN_TIMEOUT   Sascha Hauer
• [PATCH v2 0/4] video: add support for QEMU ramfb   Sascha Hauer
• [PATCH] ARM: i.MX8MM: innocomm-wb15: use revised PMIC settings   Sascha Hauer
• [PATCH] mfd: add regmap driver for rohm-bd718x7   Sascha Hauer
• [PATCH] ARM: add DEBUG_LL support for ARM64 QEMU Virt   Sascha Hauer
• [PATCH v2 1/2] ARM: dts: stm32mp15x: adjust USB OTG gadget tx fifo sizes   Sascha Hauer
• [PATCH v2] ARM: rpi: parse memory from vc fdt   SCHNEIDER Johannes
• [PATCH v2] ARM: i.MX8M: smccc: allow SIP_BUILDINFO call on all imx8m variants   SCHNEIDER Johannes
• [PATCH v4] ARM: i.MX8M: smccc: allow SIP_BUILDINFO call on all imx8m variants   SCHNEIDER Johannes
• [PATCH v2 1/1] ARM: i.MX8M: add PCA9450 PMIC on rev-b EVK   SCHNEIDER Johannes
• [PATCH] usb: dwc2: fix multiplier handling in endpoint setup   Jules Maselbas
• [RFC PATCH] ratp: Fix retransmission for header-only packets   Jules Maselbas
• Question about RATP protocol limitation during handshake in barebox   Jules Maselbas
• Question about RATP protocol limitation during handshake in barebox   Jules Maselbas
• Draft of an errata for RFC916   Jules Maselbas
• [PATCH v2] ratp: Fix retransmission for header-only packets   Jules Maselbas
• [PATCH v2] ratp: Fix retransmission for header-only packets   Jules Maselbas
• Draft of an errata for RFC916   Jules Maselbas
• [PATCH] ARM: rpi: parse memory from vc fdt   Marcin Niestroj
• [PATCH] ddr_spd: use unsigned type for crc bytes in DDR3/4 SPD check   Denis Orlov
• [PATCH] net: e1000: read EEPROM through EERD register on 8257x adapters   Denis Orlov
• [PATCH v1 1/8] ARM: imx6sx: udoo-neo: port to driver model   Oleksij Rempel
• [PATCH v1 2/8] ARM: imx6sx: udoo-neo: enable deep probe support   Oleksij Rempel
• [PATCH v1 3/8] ARM: imx6sx: udoo-neo: fix board compatible   Oleksij Rempel
• [PATCH v1 4/8] ARM: imx6sx: udoo-neo: configure GPIO pins for board auto detection.   Oleksij Rempel
• [PATCH v1 5/8] ARM: imx6sx: udoo-neo: add version detection support   Oleksij Rempel
• [PATCH v1 6/8] ARM: imx6sx: udoo-neo: enable memory size auto detection   Oleksij Rempel
• [PATCH v1 7/8] ARM: imx6sx: udoo-neo: fix gpt timer configuration   Oleksij Rempel
• [PATCH v1 8/8] ARM: imx6sx: udoo-neo: add barebox update handler support   Oleksij Rempel
• [PATCH v2] ARM: rpi: parse memory from vc fdt   Johannes Schneider
• [PATCH v2 1/1] ARM: i.MX8M: add PCA9450 PMIC on rev-b EVK   Johannes Schneider
• [PATCH v2 1/1] ARM: i.MX8M: fix typo in function call   Johannes Schneider
• [PATCH v2 1/1] ARM: i.MX8M: smccc: fix firmware_atf check   Johannes Schneider
• [PATCH v3] ARM: i.MX8M: separate function call for clock_init   Johannes Schneider
• [PATCH v4] ARM: rpi: parse memory from vc fdt   Johannes Schneider
• [PATCH v4] ARM: i.MX8M: separate function call for clock_init   Johannes Schneider
• [PATCH v2] ARM: i.MX8M: smccc: allow SIP_BUILDINFO call on all imx8m variants   Johannes Schneider
• [PATCH v4] ARM: i.MX8M: smccc: allow SIP_BUILDINFO call on all imx8m variants   Johannes Schneider
• [PATCH] of: partition: moan if adding a partition failed   Alexander Shiyan
• [PATCH] spi: Fix probing SPI drivers without a cs-gpios node   Alexander Shiyan
• [PATCH] spi: Fix probing SPI drivers without a cs-gpios node   Alexander Shiyan
• arasan-sdhci eMMC Problem 'command timeout'   Yann Sionneau
• [PATCH 1/3] nvmem: ocotp: add support for second MAC address on i.MX8MP   Lucas Stach
• [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location   Lucas Stach
• [PATCH 3/3] net: eqos: add i.MX8MP support   Lucas Stach
• [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location   Lucas Stach
• [PATCH 2/3] ARM: dts: i.MX8MP: move MAC address description to common location   Lucas Stach
• [PATCH 0/7] Support generating DIMM parameters on more systems   John Watts
• [PATCH 1/7] I2C: i.MX: Add early i2c support for i.MX6   John Watts
• [PATCH 2/7] ddr: fsl: Pass mclk_ps to ddr*_compute_dimm_parameters   John Watts
• [PATCH 3/7] ddr_dimms: Move FSL dimm_params to include/ddr_dimms.h   John Watts
• [PATCH 4/7] ddr: fsl: Remove includes to fsl-specific code   John Watts
• [PATCH 5/7] ddr_dimms: Move ddr*_dimm_params to common   John Watts
• [PATCH 6/7] ddr_dimms: Remove mclk_ps for DDR3 and DDR4   John Watts
• [PATCH 7/7] ddr_spd: Support reading SPD from DDR3 sticks   John Watts
• [PATCH] spi: Fix probing SPI drivers without a cs-gpios node   John Watts
• [PATCH] spi: Fix probing SPI drivers without a cs-gpios node   John Watts
• [PATCH 0/5] Add support for the Kosagi Novena board   John Watts
• [PATCH 1/5] ARM: novena: Add Kosagi Novena board   John Watts
• [PATCH 2/5] ARM: novena: Setup RAM using static configuration   John Watts
• [PATCH 3/5] ARM: novena: Require the PFUZE regulator   John Watts
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   John Watts
• [PATCH 5/5] ARM: novena: Use DDR3 information from SPD EEPROM   John Watts
• [PATCH] spi: Fix probing SPI drivers without a cs-gpios node   John Watts
• [PATCH 5/5] ARM: novena: Use DDR3 information from SPD EEPROM   John Watts
• [PATCH] spi: Fix probing SPI drivers without a cs-gpios node   John Watts
• [PATCH 1/7] I2C: i.MX: Add early i2c support for i.MX6   John Watts
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   John Watts
• [PATCH 1/2] imx6-mmdc: Work around ERR050070   John Watts
• [PATCH 2/2] imx6-mmdc: Revert calibration configuration on failure   John Watts
• [PATCH 1/2] imx6-mmdc: Work around ERR050070   John Watts
• [PATCH 0/7] Support generating DIMM parameters on more systems   John Watts
• [PATCH 2/2] imx6-mmdc: Revert calibration configuration on failure   John Watts
• [PATCH v2 1/2] imx6-mmdc: Work around ERR050070   John Watts
• [PATCH v2 2/2] imx6-mmdc: Revert calibration configuration on failure   John Watts
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   John Watts
• [PATCH v2] spi: Fix probing SPI drivers with no cs-gpios   John Watts
• Question about RATP protocol limitation during handshake in barebox   John Watts
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   John Watts
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   John Watts
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   John Watts
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   John Watts
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   John Watts
• [PATCH 4/5] ARM: novena: Read Ethernet MAC address from EEPROM   John Watts
• Draft of an errata for RFC916   John Watts
• [PATCH v2 0/4] Add support for the Kosagi Novena board   John Watts
• [PATCH v2 1/4] ARM: novena: Add Kosagi Novena board   John Watts
• [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration   John Watts
• [PATCH v2 3/4] ARM: novena: Read Ethernet MAC address from EEPROM   John Watts
• [PATCH v2 4/4] ARM: novena: Use DDR3 information from SPD EEPROM   John Watts
• [PATCH v2 1/4] ARM: novena: Add Kosagi Novena board   John Watts
• [PATCH v2 2/4] ARM: novena: Setup RAM using static configuration   John Watts
• [PATCH v2 3/4] ARM: novena: Read Ethernet MAC address from EEPROM   John Watts
• [PATCH] ARM: i.MX6: Specify OCRAM base address and size   John Watts
• [PATCH] I2C: i.MX: early: Use internal udelay   John Watts
• [PATCH v2] ARM: i.MX6: Specify OCRAM base address and size   John Watts
• [PATCH v2] ARM: i.MX6: Specify OCRAM base address and size   John Watts
• [PATCH v3 0/4] Add support for the Kosagi Novena board   John Watts
• [PATCH v3 1/4] ARM: novena: Add Kosagi Novena board   John Watts
• [PATCH v3 2/4] ARM: novena: Setup RAM using static configuration   John Watts
• [PATCH v3 3/4] ARM: novena: Read Ethernet MAC address from EEPROM   John Watts
• [PATCH v3 4/4] ARM: novena: Use DDR3 information from SPD EEPROM   John Watts
• [PATCH] I2C: i.MX: early: Use internal udelay   John Watts
• [PATCH] I2C: i.MX: early: Use internal udelay   John Watts
• [PATCH] I2C: i.MX: early: Use internal udelay   John Watts
• [PATCH] I2C: i.MX: early: Use internal udelay   John Watts
• [PATCH v3 3/4] ARM: novena: Read Ethernet MAC address from EEPROM   John Watts
• [PATCH v3 1/4] ARM: novena: Add Kosagi Novena board   John Watts
• [PATCH v3 4/4] ARM: novena: Use DDR3 information from SPD EEPROM   John Watts
• [PATCH] I2C: i.MX: early: Use internal udelay   John Watts
• [PATCH] ddr_dimms: Check spd->mem_type before computing parameters   John Watts
• [PATCH] Documentation: i.MX8M: add EVK barebox installation documentation   Ulrich Ölmann
• [PATCH] of: partition: moan if adding a partition failed   Ulrich Ölmann
• [PATCH v2] of: partition: moan if adding a partition failed   Ulrich Ölmann
• [PATCH] of: partition: moan if adding a partition failed   Ulrich Ölmann

Last message date: Tue Jan 31 21:33:34 PST 2023
Archived on: Tue Jan 31 21:33:58 PST 2023

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...