[RFT PATCH] ARM: stm32mp: odyssey-som: use upstream device trees
Sascha Hauer
sha at pengutronix.de
Mon Jan 23 00:21:27 PST 2023
On Mon, Jan 16, 2023 at 02:29:11PM +0100, Ahmad Fatoum wrote:
> When board support was first added, it used a version of the device tree
> of the Linux kernel mailing list. The device tree is now upstream, so
> replace the copy we have with the version already existing in dts/.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> ---
> I don't have the hardware, Cc'ing Xogium, who has this board and may be
> able to test this patch.
> ---
> arch/arm/dts/stm32mp157c-odyssey-som.dtsi | 294 ----------------------
> arch/arm/dts/stm32mp157c-odyssey.dts | 6 +-
> arch/arm/dts/stm32mp157c-odyssey.dtsi | 72 ------
> 3 files changed, 1 insertion(+), 371 deletions(-)
> delete mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi
> delete mode 100644 arch/arm/dts/stm32mp157c-odyssey.dtsi
Applied, thanks
Sascha
>
> diff --git a/arch/arm/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/dts/stm32mp157c-odyssey-som.dtsi
> deleted file mode 100644
> index 1e5bd8bccb71..000000000000
> --- a/arch/arm/dts/stm32mp157c-odyssey-som.dtsi
> +++ /dev/null
> @@ -1,294 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> -/*
> - * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski at gmail.com>.
> - */
> -
> -/dts-v1/;
> -
> -#include <arm/stm32mp157.dtsi>
> -#include <arm/stm32mp15xc.dtsi>
> -#include <arm/stm32mp15-pinctrl.dtsi>
> -#include <arm/stm32mp15xxac-pinctrl.dtsi>
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/mfd/st,stpmic1.h>
> -
> -/ {
> - model = "Seeed Studio Odyssey-STM32MP157C SOM";
> - compatible = "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
> -
> - memory at c0000000 {
> - device_type = "memory";
> - reg = <0xc0000000 0x20000000>;
> - };
> -
> - reserved-memory {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> -
> - mcuram2: mcuram2 at 10000000 {
> - compatible = "shared-dma-pool";
> - reg = <0x10000000 0x40000>;
> - no-map;
> - };
> -
> - vdev0vring0: vdev0vring0 at 10040000 {
> - compatible = "shared-dma-pool";
> - reg = <0x10040000 0x1000>;
> - no-map;
> - };
> -
> - vdev0vring1: vdev0vring1 at 10041000 {
> - compatible = "shared-dma-pool";
> - reg = <0x10041000 0x1000>;
> - no-map;
> - };
> -
> - vdev0buffer: vdev0buffer at 10042000 {
> - compatible = "shared-dma-pool";
> - reg = <0x10042000 0x4000>;
> - no-map;
> - };
> -
> - mcuram: mcuram at 30000000 {
> - compatible = "shared-dma-pool";
> - reg = <0x30000000 0x40000>;
> - no-map;
> - };
> -
> - retram: retram at 38000000 {
> - compatible = "shared-dma-pool";
> - reg = <0x38000000 0x10000>;
> - no-map;
> - };
> -
> - gpu_reserved: gpu at d4000000 {
> - reg = <0xd4000000 0x4000000>;
> - no-map;
> - };
> - };
> -
> - led {
> - compatible = "gpio-leds";
> - led-blue {
> - color = <LED_COLOR_ID_BLUE>;
> - function = LED_FUNCTION_HEARTBEAT;
> - gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "heartbeat";
> - };
> - };
> -};
> -
> -&gpu {
> - contiguous-area = <&gpu_reserved>;
> - status = "okay";
> -};
> -
> -&i2c2 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c2_pins_a>;
> - i2c-scl-rising-time-ns = <185>;
> - i2c-scl-falling-time-ns = <20>;
> - status = "okay";
> - /* spare dmas for other usage */
> - /delete-property/dmas;
> - /delete-property/dma-names;
> -
> - pmic: stpmic at 33 {
> - compatible = "st,stpmic1";
> - reg = <0x33>;
> - interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> -
> - regulators {
> - compatible = "st,stpmic1-regulators";
> - ldo1-supply = <&v3v3>;
> - ldo3-supply = <&vdd_ddr>;
> - ldo6-supply = <&v3v3>;
> - pwr_sw1-supply = <&bst_out>;
> - pwr_sw2-supply = <&bst_out>;
> -
> - vddcore: buck1 {
> - regulator-name = "vddcore";
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - regulator-initial-mode = <0>;
> - regulator-over-current-protection;
> - };
> -
> - vdd_ddr: buck2 {
> - regulator-name = "vdd_ddr";
> - regulator-min-microvolt = <1350000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - regulator-initial-mode = <0>;
> - regulator-over-current-protection;
> - };
> -
> - vdd: buck3 {
> - regulator-name = "vdd";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - st,mask-reset;
> - regulator-initial-mode = <0>;
> - regulator-over-current-protection;
> - };
> -
> - v3v3: buck4 {
> - regulator-name = "v3v3";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - regulator-over-current-protection;
> - regulator-initial-mode = <0>;
> - };
> -
> - v1v8_audio: ldo1 {
> - regulator-name = "v1v8_audio";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - interrupts = <IT_CURLIM_LDO1 0>;
> - };
> -
> - v3v3_hdmi: ldo2 {
> - regulator-name = "v3v3_hdmi";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - interrupts = <IT_CURLIM_LDO2 0>;
> - };
> -
> - vtt_ddr: ldo3 {
> - regulator-name = "vtt_ddr";
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <750000>;
> - regulator-always-on;
> - regulator-over-current-protection;
> - };
> -
> - vdd_usb: ldo4 {
> - regulator-name = "vdd_usb";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - interrupts = <IT_CURLIM_LDO4 0>;
> - };
> -
> - vdda: ldo5 {
> - regulator-name = "vdda";
> - regulator-min-microvolt = <2900000>;
> - regulator-max-microvolt = <2900000>;
> - interrupts = <IT_CURLIM_LDO5 0>;
> - regulator-boot-on;
> - };
> -
> - v1v2_hdmi: ldo6 {
> - regulator-name = "v1v2_hdmi";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1200000>;
> - regulator-always-on;
> - interrupts = <IT_CURLIM_LDO6 0>;
> - };
> -
> - vref_ddr: vref_ddr {
> - regulator-name = "vref_ddr";
> - regulator-always-on;
> - regulator-over-current-protection;
> - };
> -
> - bst_out: boost {
> - regulator-name = "bst_out";
> - interrupts = <IT_OCP_BOOST 0>;
> - };
> -
> - vbus_otg: pwr_sw1 {
> - regulator-name = "vbus_otg";
> - interrupts = <IT_OCP_OTG 0>;
> - };
> -
> - vbus_sw: pwr_sw2 {
> - regulator-name = "vbus_sw";
> - interrupts = <IT_OCP_SWOUT 0>;
> - regulator-active-discharge;
> - };
> - };
> -
> - onkey {
> - compatible = "st,stpmic1-onkey";
> - interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
> - interrupt-names = "onkey-falling", "onkey-rising";
> - power-off-time-sec = <10>;
> - };
> -
> - watchdog {
> - compatible = "st,stpmic1-wdt";
> - status = "disabled";
> - };
> - };
> -};
> -
> -&ipcc {
> - status = "okay";
> -};
> -
> -&iwdg2 {
> - timeout-sec = <32>;
> - status = "okay";
> -};
> -
> -&m4_rproc {
> - memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
> - <&vdev0vring1>, <&vdev0buffer>;
> - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
> - mbox-names = "vq0", "vq1", "shutdown";
> - interrupt-parent = <&exti>;
> - interrupts = <68 1>;
> - status = "okay";
> -};
> -
> -&rng1 {
> - status = "okay";
> -};
> -
> -&rtc {
> - status = "okay";
> -};
> -
> -&sdmmc2_d47_pins_a {
> - pins {
> - pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
> - <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
> - <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
> - <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
> - };
> -};
> -
> -&sdmmc2_d47_sleep_pins_a {
> - pins {
> - pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
> - <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
> - <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
> - <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
> - };
> -};
> -
> -&sdmmc2 {
> - pinctrl-names = "default", "opendrain", "sleep";
> - pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
> - pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
> - pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
> - non-removable;
> - no-sd;
> - no-sdio;
> - st,neg-edge;
> - bus-width = <8>;
> - vmmc-supply = <&v3v3>;
> - vqmmc-supply = <&v3v3>;
> - mmc-ddr-3_3v;
> - status = "okay";
> -};
> -
> diff --git a/arch/arm/dts/stm32mp157c-odyssey.dts b/arch/arm/dts/stm32mp157c-odyssey.dts
> index 0e395bdec961..6ced6363eb0f 100644
> --- a/arch/arm/dts/stm32mp157c-odyssey.dts
> +++ b/arch/arm/dts/stm32mp157c-odyssey.dts
> @@ -3,7 +3,7 @@
> * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
> */
>
> -#include "stm32mp157c-odyssey.dtsi"
> +#include <arm/stm32mp157c-odyssey.dts>
> #include "stm32mp151.dtsi"
>
> / {
> @@ -21,7 +21,3 @@
> };
> };
> };
> -
> -&phy0 {
> - reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
> -};
> diff --git a/arch/arm/dts/stm32mp157c-odyssey.dtsi b/arch/arm/dts/stm32mp157c-odyssey.dtsi
> deleted file mode 100644
> index 85a4f313ae33..000000000000
> --- a/arch/arm/dts/stm32mp157c-odyssey.dtsi
> +++ /dev/null
> @@ -1,72 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> -/*
> - * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski at gmail.com>.
> - */
> -
> -/dts-v1/;
> -
> -#include "stm32mp157c-odyssey-som.dtsi"
> -
> -/ {
> - model = "Seeed Studio Odyssey-STM32MP157C Board";
> - compatible = "seeed,stm32mp157c-odyssey",
> - "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
> -
> - aliases {
> - ethernet0 = ðernet0;
> - serial0 = &uart4;
> - };
> -
> - chosen {
> - stdout-path = "serial0:115200n8";
> - };
> -};
> -
> -ðernet0 {
> - status = "okay";
> - pinctrl-0 = <ðernet0_rgmii_pins_a>;
> - pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>;
> - pinctrl-names = "default", "sleep";
> - phy-mode = "rgmii-id";
> - max-speed = <1000>;
> - phy-handle = <&phy0>;
> -
> - mdio0 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "snps,dwmac-mdio";
> - phy0: ethernet-phy at 7 { /* KSZ9031RN */
> - reg = <7>;
> - };
> - };
> -};
> -
> -&i2c1 {
> - pinctrl-names = "default", "sleep";
> - pinctrl-0 = <&i2c1_pins_a>;
> - pinctrl-1 = <&i2c1_sleep_pins_a>;
> - i2c-scl-rising-time-ns = <100>;
> - i2c-scl-falling-time-ns = <7>;
> - status = "okay";
> - /delete-property/dmas;
> - /delete-property/dma-names;
> -};
> -
> -&sdmmc1 {
> - pinctrl-names = "default", "opendrain", "sleep";
> - pinctrl-0 = <&sdmmc1_b4_pins_a>;
> - pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
> - pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
> - cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> - disable-wp;
> - st,neg-edge;
> - bus-width = <4>;
> - vmmc-supply = <&v3v3>;
> - status = "okay";
> -};
> -
> -&uart4 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart4_pins_a>;
> - status = "okay";
> -};
> --
> 2.30.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list