[RFT PATCH] ARM: stm32mp: odyssey-som: use upstream device trees
Ahmad Fatoum
a.fatoum at pengutronix.de
Mon Jan 16 05:29:11 PST 2023
When board support was first added, it used a version of the device tree
of the Linux kernel mailing list. The device tree is now upstream, so
replace the copy we have with the version already existing in dts/.
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
I don't have the hardware, Cc'ing Xogium, who has this board and may be
able to test this patch.
---
arch/arm/dts/stm32mp157c-odyssey-som.dtsi | 294 ----------------------
arch/arm/dts/stm32mp157c-odyssey.dts | 6 +-
arch/arm/dts/stm32mp157c-odyssey.dtsi | 72 ------
3 files changed, 1 insertion(+), 371 deletions(-)
delete mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi
delete mode 100644 arch/arm/dts/stm32mp157c-odyssey.dtsi
diff --git a/arch/arm/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/dts/stm32mp157c-odyssey-som.dtsi
deleted file mode 100644
index 1e5bd8bccb71..000000000000
--- a/arch/arm/dts/stm32mp157c-odyssey-som.dtsi
+++ /dev/null
@@ -1,294 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski at gmail.com>.
- */
-
-/dts-v1/;
-
-#include <arm/stm32mp157.dtsi>
-#include <arm/stm32mp15xc.dtsi>
-#include <arm/stm32mp15-pinctrl.dtsi>
-#include <arm/stm32mp15xxac-pinctrl.dtsi>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/mfd/st,stpmic1.h>
-
-/ {
- model = "Seeed Studio Odyssey-STM32MP157C SOM";
- compatible = "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
-
- memory at c0000000 {
- device_type = "memory";
- reg = <0xc0000000 0x20000000>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mcuram2: mcuram2 at 10000000 {
- compatible = "shared-dma-pool";
- reg = <0x10000000 0x40000>;
- no-map;
- };
-
- vdev0vring0: vdev0vring0 at 10040000 {
- compatible = "shared-dma-pool";
- reg = <0x10040000 0x1000>;
- no-map;
- };
-
- vdev0vring1: vdev0vring1 at 10041000 {
- compatible = "shared-dma-pool";
- reg = <0x10041000 0x1000>;
- no-map;
- };
-
- vdev0buffer: vdev0buffer at 10042000 {
- compatible = "shared-dma-pool";
- reg = <0x10042000 0x4000>;
- no-map;
- };
-
- mcuram: mcuram at 30000000 {
- compatible = "shared-dma-pool";
- reg = <0x30000000 0x40000>;
- no-map;
- };
-
- retram: retram at 38000000 {
- compatible = "shared-dma-pool";
- reg = <0x38000000 0x10000>;
- no-map;
- };
-
- gpu_reserved: gpu at d4000000 {
- reg = <0xd4000000 0x4000000>;
- no-map;
- };
- };
-
- led {
- compatible = "gpio-leds";
- led-blue {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_HEARTBEAT;
- gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-};
-
-&gpu {
- contiguous-area = <&gpu_reserved>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- i2c-scl-rising-time-ns = <185>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
- /* spare dmas for other usage */
- /delete-property/dmas;
- /delete-property/dma-names;
-
- pmic: stpmic at 33 {
- compatible = "st,stpmic1";
- reg = <0x33>;
- interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- regulators {
- compatible = "st,stpmic1-regulators";
- ldo1-supply = <&v3v3>;
- ldo3-supply = <&vdd_ddr>;
- ldo6-supply = <&v3v3>;
- pwr_sw1-supply = <&bst_out>;
- pwr_sw2-supply = <&bst_out>;
-
- vddcore: buck1 {
- regulator-name = "vddcore";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- vdd_ddr: buck2 {
- regulator-name = "vdd_ddr";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- vdd: buck3 {
- regulator-name = "vdd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- st,mask-reset;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- v3v3: buck4 {
- regulator-name = "v3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-over-current-protection;
- regulator-initial-mode = <0>;
- };
-
- v1v8_audio: ldo1 {
- regulator-name = "v1v8_audio";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO1 0>;
- };
-
- v3v3_hdmi: ldo2 {
- regulator-name = "v3v3_hdmi";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO2 0>;
- };
-
- vtt_ddr: ldo3 {
- regulator-name = "vtt_ddr";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <750000>;
- regulator-always-on;
- regulator-over-current-protection;
- };
-
- vdd_usb: ldo4 {
- regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- interrupts = <IT_CURLIM_LDO4 0>;
- };
-
- vdda: ldo5 {
- regulator-name = "vdda";
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <2900000>;
- interrupts = <IT_CURLIM_LDO5 0>;
- regulator-boot-on;
- };
-
- v1v2_hdmi: ldo6 {
- regulator-name = "v1v2_hdmi";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO6 0>;
- };
-
- vref_ddr: vref_ddr {
- regulator-name = "vref_ddr";
- regulator-always-on;
- regulator-over-current-protection;
- };
-
- bst_out: boost {
- regulator-name = "bst_out";
- interrupts = <IT_OCP_BOOST 0>;
- };
-
- vbus_otg: pwr_sw1 {
- regulator-name = "vbus_otg";
- interrupts = <IT_OCP_OTG 0>;
- };
-
- vbus_sw: pwr_sw2 {
- regulator-name = "vbus_sw";
- interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge;
- };
- };
-
- onkey {
- compatible = "st,stpmic1-onkey";
- interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
- interrupt-names = "onkey-falling", "onkey-rising";
- power-off-time-sec = <10>;
- };
-
- watchdog {
- compatible = "st,stpmic1-wdt";
- status = "disabled";
- };
- };
-};
-
-&ipcc {
- status = "okay";
-};
-
-&iwdg2 {
- timeout-sec = <32>;
- status = "okay";
-};
-
-&m4_rproc {
- memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
- <&vdev0vring1>, <&vdev0buffer>;
- mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
- mbox-names = "vq0", "vq1", "shutdown";
- interrupt-parent = <&exti>;
- interrupts = <68 1>;
- status = "okay";
-};
-
-&rng1 {
- status = "okay";
-};
-
-&rtc {
- status = "okay";
-};
-
-&sdmmc2_d47_pins_a {
- pins {
- pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
- <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
- <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
- <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
- };
-};
-
-&sdmmc2_d47_sleep_pins_a {
- pins {
- pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
- <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
- <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
- <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
- };
-};
-
-&sdmmc2 {
- pinctrl-names = "default", "opendrain", "sleep";
- pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
- pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
- pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
- non-removable;
- no-sd;
- no-sdio;
- st,neg-edge;
- bus-width = <8>;
- vmmc-supply = <&v3v3>;
- vqmmc-supply = <&v3v3>;
- mmc-ddr-3_3v;
- status = "okay";
-};
-
diff --git a/arch/arm/dts/stm32mp157c-odyssey.dts b/arch/arm/dts/stm32mp157c-odyssey.dts
index 0e395bdec961..6ced6363eb0f 100644
--- a/arch/arm/dts/stm32mp157c-odyssey.dts
+++ b/arch/arm/dts/stm32mp157c-odyssey.dts
@@ -3,7 +3,7 @@
* Copyright (C) 2020 Ahmad Fatoum, Pengutronix
*/
-#include "stm32mp157c-odyssey.dtsi"
+#include <arm/stm32mp157c-odyssey.dts>
#include "stm32mp151.dtsi"
/ {
@@ -21,7 +21,3 @@
};
};
};
-
-&phy0 {
- reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/dts/stm32mp157c-odyssey.dtsi b/arch/arm/dts/stm32mp157c-odyssey.dtsi
deleted file mode 100644
index 85a4f313ae33..000000000000
--- a/arch/arm/dts/stm32mp157c-odyssey.dtsi
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski at gmail.com>.
- */
-
-/dts-v1/;
-
-#include "stm32mp157c-odyssey-som.dtsi"
-
-/ {
- model = "Seeed Studio Odyssey-STM32MP157C Board";
- compatible = "seeed,stm32mp157c-odyssey",
- "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
-
- aliases {
- ethernet0 = ðernet0;
- serial0 = &uart4;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-ðernet0 {
- status = "okay";
- pinctrl-0 = <ðernet0_rgmii_pins_a>;
- pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>;
- pinctrl-names = "default", "sleep";
- phy-mode = "rgmii-id";
- max-speed = <1000>;
- phy-handle = <&phy0>;
-
- mdio0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- phy0: ethernet-phy at 7 { /* KSZ9031RN */
- reg = <7>;
- };
- };
-};
-
-&i2c1 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c1_pins_a>;
- pinctrl-1 = <&i2c1_sleep_pins_a>;
- i2c-scl-rising-time-ns = <100>;
- i2c-scl-falling-time-ns = <7>;
- status = "okay";
- /delete-property/dmas;
- /delete-property/dma-names;
-};
-
-&sdmmc1 {
- pinctrl-names = "default", "opendrain", "sleep";
- pinctrl-0 = <&sdmmc1_b4_pins_a>;
- pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
- pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
- cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- disable-wp;
- st,neg-edge;
- bus-width = <4>;
- vmmc-supply = <&v3v3>;
- status = "okay";
-};
-
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_a>;
- status = "okay";
-};
--
2.30.2
More information about the barebox
mailing list