[RFT PATCH] ARM: stm32mp: odyssey-som: use upstream device trees
Ahmad Fatoum
a.fatoum at pengutronix.de
Mon Jan 23 01:15:30 PST 2023
Hello Sascha,
On 23.01.23 09:21, Sascha Hauer wrote:
> On Mon, Jan 16, 2023 at 02:29:11PM +0100, Ahmad Fatoum wrote:
>> When board support was first added, it used a version of the device tree
>> of the Linux kernel mailing list. The device tree is now upstream, so
>> replace the copy we have with the version already existing in dts/.
>>
>> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
>> ---
>> I don't have the hardware, Cc'ing Xogium, who has this board and may be
>> able to test this patch.
>> ---
>> arch/arm/dts/stm32mp157c-odyssey-som.dtsi | 294 ----------------------
>> arch/arm/dts/stm32mp157c-odyssey.dts | 6 +-
>> arch/arm/dts/stm32mp157c-odyssey.dtsi | 72 ------
>> 3 files changed, 1 insertion(+), 371 deletions(-)
>> delete mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi
>> delete mode 100644 arch/arm/dts/stm32mp157c-odyssey.dtsi
>
> Applied, thanks
I don't mind waiting for this patch to be tested before applying.
>
> Sascha
>
>>
>> diff --git a/arch/arm/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/dts/stm32mp157c-odyssey-som.dtsi
>> deleted file mode 100644
>> index 1e5bd8bccb71..000000000000
>> --- a/arch/arm/dts/stm32mp157c-odyssey-som.dtsi
>> +++ /dev/null
>> @@ -1,294 +0,0 @@
>> -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>> -/*
>> - * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski at gmail.com>.
>> - */
>> -
>> -/dts-v1/;
>> -
>> -#include <arm/stm32mp157.dtsi>
>> -#include <arm/stm32mp15xc.dtsi>
>> -#include <arm/stm32mp15-pinctrl.dtsi>
>> -#include <arm/stm32mp15xxac-pinctrl.dtsi>
>> -#include <dt-bindings/gpio/gpio.h>
>> -#include <dt-bindings/leds/common.h>
>> -#include <dt-bindings/mfd/st,stpmic1.h>
>> -
>> -/ {
>> - model = "Seeed Studio Odyssey-STM32MP157C SOM";
>> - compatible = "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
>> -
>> - memory at c0000000 {
>> - device_type = "memory";
>> - reg = <0xc0000000 0x20000000>;
>> - };
>> -
>> - reserved-memory {
>> - #address-cells = <1>;
>> - #size-cells = <1>;
>> - ranges;
>> -
>> - mcuram2: mcuram2 at 10000000 {
>> - compatible = "shared-dma-pool";
>> - reg = <0x10000000 0x40000>;
>> - no-map;
>> - };
>> -
>> - vdev0vring0: vdev0vring0 at 10040000 {
>> - compatible = "shared-dma-pool";
>> - reg = <0x10040000 0x1000>;
>> - no-map;
>> - };
>> -
>> - vdev0vring1: vdev0vring1 at 10041000 {
>> - compatible = "shared-dma-pool";
>> - reg = <0x10041000 0x1000>;
>> - no-map;
>> - };
>> -
>> - vdev0buffer: vdev0buffer at 10042000 {
>> - compatible = "shared-dma-pool";
>> - reg = <0x10042000 0x4000>;
>> - no-map;
>> - };
>> -
>> - mcuram: mcuram at 30000000 {
>> - compatible = "shared-dma-pool";
>> - reg = <0x30000000 0x40000>;
>> - no-map;
>> - };
>> -
>> - retram: retram at 38000000 {
>> - compatible = "shared-dma-pool";
>> - reg = <0x38000000 0x10000>;
>> - no-map;
>> - };
>> -
>> - gpu_reserved: gpu at d4000000 {
>> - reg = <0xd4000000 0x4000000>;
>> - no-map;
>> - };
>> - };
>> -
>> - led {
>> - compatible = "gpio-leds";
>> - led-blue {
>> - color = <LED_COLOR_ID_BLUE>;
>> - function = LED_FUNCTION_HEARTBEAT;
>> - gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
>> - linux,default-trigger = "heartbeat";
>> - };
>> - };
>> -};
>> -
>> -&gpu {
>> - contiguous-area = <&gpu_reserved>;
>> - status = "okay";
>> -};
>> -
>> -&i2c2 {
>> - pinctrl-names = "default";
>> - pinctrl-0 = <&i2c2_pins_a>;
>> - i2c-scl-rising-time-ns = <185>;
>> - i2c-scl-falling-time-ns = <20>;
>> - status = "okay";
>> - /* spare dmas for other usage */
>> - /delete-property/dmas;
>> - /delete-property/dma-names;
>> -
>> - pmic: stpmic at 33 {
>> - compatible = "st,stpmic1";
>> - reg = <0x33>;
>> - interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
>> - interrupt-controller;
>> - #interrupt-cells = <2>;
>> -
>> - regulators {
>> - compatible = "st,stpmic1-regulators";
>> - ldo1-supply = <&v3v3>;
>> - ldo3-supply = <&vdd_ddr>;
>> - ldo6-supply = <&v3v3>;
>> - pwr_sw1-supply = <&bst_out>;
>> - pwr_sw2-supply = <&bst_out>;
>> -
>> - vddcore: buck1 {
>> - regulator-name = "vddcore";
>> - regulator-min-microvolt = <800000>;
>> - regulator-max-microvolt = <1350000>;
>> - regulator-always-on;
>> - regulator-initial-mode = <0>;
>> - regulator-over-current-protection;
>> - };
>> -
>> - vdd_ddr: buck2 {
>> - regulator-name = "vdd_ddr";
>> - regulator-min-microvolt = <1350000>;
>> - regulator-max-microvolt = <1350000>;
>> - regulator-always-on;
>> - regulator-initial-mode = <0>;
>> - regulator-over-current-protection;
>> - };
>> -
>> - vdd: buck3 {
>> - regulator-name = "vdd";
>> - regulator-min-microvolt = <3300000>;
>> - regulator-max-microvolt = <3300000>;
>> - regulator-always-on;
>> - st,mask-reset;
>> - regulator-initial-mode = <0>;
>> - regulator-over-current-protection;
>> - };
>> -
>> - v3v3: buck4 {
>> - regulator-name = "v3v3";
>> - regulator-min-microvolt = <3300000>;
>> - regulator-max-microvolt = <3300000>;
>> - regulator-always-on;
>> - regulator-over-current-protection;
>> - regulator-initial-mode = <0>;
>> - };
>> -
>> - v1v8_audio: ldo1 {
>> - regulator-name = "v1v8_audio";
>> - regulator-min-microvolt = <1800000>;
>> - regulator-max-microvolt = <1800000>;
>> - regulator-always-on;
>> - interrupts = <IT_CURLIM_LDO1 0>;
>> - };
>> -
>> - v3v3_hdmi: ldo2 {
>> - regulator-name = "v3v3_hdmi";
>> - regulator-min-microvolt = <3300000>;
>> - regulator-max-microvolt = <3300000>;
>> - regulator-always-on;
>> - interrupts = <IT_CURLIM_LDO2 0>;
>> - };
>> -
>> - vtt_ddr: ldo3 {
>> - regulator-name = "vtt_ddr";
>> - regulator-min-microvolt = <500000>;
>> - regulator-max-microvolt = <750000>;
>> - regulator-always-on;
>> - regulator-over-current-protection;
>> - };
>> -
>> - vdd_usb: ldo4 {
>> - regulator-name = "vdd_usb";
>> - regulator-min-microvolt = <3300000>;
>> - regulator-max-microvolt = <3300000>;
>> - interrupts = <IT_CURLIM_LDO4 0>;
>> - };
>> -
>> - vdda: ldo5 {
>> - regulator-name = "vdda";
>> - regulator-min-microvolt = <2900000>;
>> - regulator-max-microvolt = <2900000>;
>> - interrupts = <IT_CURLIM_LDO5 0>;
>> - regulator-boot-on;
>> - };
>> -
>> - v1v2_hdmi: ldo6 {
>> - regulator-name = "v1v2_hdmi";
>> - regulator-min-microvolt = <1200000>;
>> - regulator-max-microvolt = <1200000>;
>> - regulator-always-on;
>> - interrupts = <IT_CURLIM_LDO6 0>;
>> - };
>> -
>> - vref_ddr: vref_ddr {
>> - regulator-name = "vref_ddr";
>> - regulator-always-on;
>> - regulator-over-current-protection;
>> - };
>> -
>> - bst_out: boost {
>> - regulator-name = "bst_out";
>> - interrupts = <IT_OCP_BOOST 0>;
>> - };
>> -
>> - vbus_otg: pwr_sw1 {
>> - regulator-name = "vbus_otg";
>> - interrupts = <IT_OCP_OTG 0>;
>> - };
>> -
>> - vbus_sw: pwr_sw2 {
>> - regulator-name = "vbus_sw";
>> - interrupts = <IT_OCP_SWOUT 0>;
>> - regulator-active-discharge;
>> - };
>> - };
>> -
>> - onkey {
>> - compatible = "st,stpmic1-onkey";
>> - interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
>> - interrupt-names = "onkey-falling", "onkey-rising";
>> - power-off-time-sec = <10>;
>> - };
>> -
>> - watchdog {
>> - compatible = "st,stpmic1-wdt";
>> - status = "disabled";
>> - };
>> - };
>> -};
>> -
>> -&ipcc {
>> - status = "okay";
>> -};
>> -
>> -&iwdg2 {
>> - timeout-sec = <32>;
>> - status = "okay";
>> -};
>> -
>> -&m4_rproc {
>> - memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
>> - <&vdev0vring1>, <&vdev0buffer>;
>> - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
>> - mbox-names = "vq0", "vq1", "shutdown";
>> - interrupt-parent = <&exti>;
>> - interrupts = <68 1>;
>> - status = "okay";
>> -};
>> -
>> -&rng1 {
>> - status = "okay";
>> -};
>> -
>> -&rtc {
>> - status = "okay";
>> -};
>> -
>> -&sdmmc2_d47_pins_a {
>> - pins {
>> - pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
>> - <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
>> - <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
>> - <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
>> - };
>> -};
>> -
>> -&sdmmc2_d47_sleep_pins_a {
>> - pins {
>> - pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
>> - <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
>> - <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
>> - <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
>> - };
>> -};
>> -
>> -&sdmmc2 {
>> - pinctrl-names = "default", "opendrain", "sleep";
>> - pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
>> - pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
>> - pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
>> - non-removable;
>> - no-sd;
>> - no-sdio;
>> - st,neg-edge;
>> - bus-width = <8>;
>> - vmmc-supply = <&v3v3>;
>> - vqmmc-supply = <&v3v3>;
>> - mmc-ddr-3_3v;
>> - status = "okay";
>> -};
>> -
>> diff --git a/arch/arm/dts/stm32mp157c-odyssey.dts b/arch/arm/dts/stm32mp157c-odyssey.dts
>> index 0e395bdec961..6ced6363eb0f 100644
>> --- a/arch/arm/dts/stm32mp157c-odyssey.dts
>> +++ b/arch/arm/dts/stm32mp157c-odyssey.dts
>> @@ -3,7 +3,7 @@
>> * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
>> */
>>
>> -#include "stm32mp157c-odyssey.dtsi"
>> +#include <arm/stm32mp157c-odyssey.dts>
>> #include "stm32mp151.dtsi"
>>
>> / {
>> @@ -21,7 +21,3 @@
>> };
>> };
>> };
>> -
>> -&phy0 {
>> - reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
>> -};
>> diff --git a/arch/arm/dts/stm32mp157c-odyssey.dtsi b/arch/arm/dts/stm32mp157c-odyssey.dtsi
>> deleted file mode 100644
>> index 85a4f313ae33..000000000000
>> --- a/arch/arm/dts/stm32mp157c-odyssey.dtsi
>> +++ /dev/null
>> @@ -1,72 +0,0 @@
>> -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>> -/*
>> - * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski at gmail.com>.
>> - */
>> -
>> -/dts-v1/;
>> -
>> -#include "stm32mp157c-odyssey-som.dtsi"
>> -
>> -/ {
>> - model = "Seeed Studio Odyssey-STM32MP157C Board";
>> - compatible = "seeed,stm32mp157c-odyssey",
>> - "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
>> -
>> - aliases {
>> - ethernet0 = ðernet0;
>> - serial0 = &uart4;
>> - };
>> -
>> - chosen {
>> - stdout-path = "serial0:115200n8";
>> - };
>> -};
>> -
>> -ðernet0 {
>> - status = "okay";
>> - pinctrl-0 = <ðernet0_rgmii_pins_a>;
>> - pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>;
>> - pinctrl-names = "default", "sleep";
>> - phy-mode = "rgmii-id";
>> - max-speed = <1000>;
>> - phy-handle = <&phy0>;
>> -
>> - mdio0 {
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> - compatible = "snps,dwmac-mdio";
>> - phy0: ethernet-phy at 7 { /* KSZ9031RN */
>> - reg = <7>;
>> - };
>> - };
>> -};
>> -
>> -&i2c1 {
>> - pinctrl-names = "default", "sleep";
>> - pinctrl-0 = <&i2c1_pins_a>;
>> - pinctrl-1 = <&i2c1_sleep_pins_a>;
>> - i2c-scl-rising-time-ns = <100>;
>> - i2c-scl-falling-time-ns = <7>;
>> - status = "okay";
>> - /delete-property/dmas;
>> - /delete-property/dma-names;
>> -};
>> -
>> -&sdmmc1 {
>> - pinctrl-names = "default", "opendrain", "sleep";
>> - pinctrl-0 = <&sdmmc1_b4_pins_a>;
>> - pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
>> - pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
>> - cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
>> - disable-wp;
>> - st,neg-edge;
>> - bus-width = <4>;
>> - vmmc-supply = <&v3v3>;
>> - status = "okay";
>> -};
>> -
>> -&uart4 {
>> - pinctrl-names = "default";
>> - pinctrl-0 = <&uart4_pins_a>;
>> - status = "okay";
>> -};
>> --
>> 2.30.2
>>
>>
>>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list