[PATCH] phy: stm32-usphyc: add mdelay(1) to fix timeout on some machines

[Sascha Hauer]

On Tue, Jan 24, 2023 at 09:31:19PM +0100, Michael Grzeschik wrote:
> An mdelay of 1 seems to be necessary on some machines, since
> the monsel status does not seem to be accurate. On rare occasions just
> working with the phy after this pll check lead to no functional usb.
> With this short mdelay this issue was not reported again.
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
> ---
>  drivers/phy/phy-stm32-usbphyc.c | 9 +++++++++
>  1 file changed, 9 insertions(+)

Applied, thanks

Sascha

> 
> diff --git a/drivers/phy/phy-stm32-usbphyc.c b/drivers/phy/phy-stm32-usbphyc.c
> index 657824405f..aff6b60d5e 100644
> --- a/drivers/phy/phy-stm32-usbphyc.c
> +++ b/drivers/phy/phy-stm32-usbphyc.c
> @@ -271,6 +271,15 @@ static int stm32_usbphyc_phy_init(struct phy *phy)
>  		goto pll_disable;
>  	}
>  
> +	/* This is a workaround that seems to be necessary on some
> +	 * machines, since the monsel status does not seem to be
> +	 * accurate. On rare occasions just working with the phy after
> +	 * this pll check the usb peripheral (e.g. on the dwc2) run into
> +	 * timeout issues and leading to no functional usb. With this
> +	 * short mdelay this issue was not reported again.
> +	 */
> +	mdelay(1);
> +
>  	usbphyc_phy->active = true;
>  
>  	return 0;
> -- 
> 2.30.2
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |