[PATCH v2 00/11] ARM: at91: sama5d4: add basic Wifx L1 support
Sascha Hauer
sha at pengutronix.de
Tue Jan 10 07:05:30 PST 2023
On Mon, Jan 09, 2023 at 02:08:11PM +0100, Ahmad Fatoum wrote:
> The Wifx L1 is a SAMA5D4 LoRaWAN gateway. It boots from NAND, but this
> can be overridden by inserting a bootable SD-Card.
>
> This first port only provides second-stage SD-Card support. It enables
> use of UART, I2C/EEPROM, Ethernet and SD-Card. For NAND use on SAMA5D4,
> an updated Linux driver was ported to barebox.
> This will follow separately.
>
> v1 -> v2:
> - skip stack setup on SAMA5D2 (Sascha)
> - Add Sam's Acked-by
> - Rebase on upstream/next
>
> Ahmad Fatoum (11):
> ARM: at91: sama5: switch to nonnaked entry functions
> ARM: at91: sama5d4: add entry point helpers
> ARM: at91: sama5d4: enable for DT use
> net: macb: match atmel,sama5d4-gem compatible
> i2c: at91: extend for SAMA5D4 support
> eeprom: at24: add 24mac402/602 support
> driver: always ensure probe of RAM registered with mem_platform_driver
> common: deep-probe: don't build without CONFIG_OFDEVICE
> pinctrl: at91: make deep-probe compatible
> ARM: at91: make bootsource code generic to all SAMA5
> ARM: at91: SAMA5D4: add Wifx L1 support
Applied, thanks
Sascha
>
> arch/arm/boards/Makefile | 1 +
> .../boards/microchip-ksz9477-evb/lowlevel.c | 6 +-
> .../arm/boards/sama5d27-giantboard/lowlevel.c | 4 +-
> arch/arm/boards/sama5d27-som1/lowlevel.c | 4 +-
> arch/arm/boards/sama5d3_xplained/lowlevel.c | 6 +-
> arch/arm/boards/sama5d4_wifx/Makefile | 4 +
> arch/arm/boards/sama5d4_wifx/board.c | 38 ++
> arch/arm/boards/sama5d4_wifx/lowlevel.c | 18 +
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/at91-sama5d4_wifx_l1.dts | 358 ++++++++++++++++++
> arch/arm/dts/sama5d4.dtsi | 9 +
> arch/arm/mach-at91/Kconfig | 11 +
> arch/arm/mach-at91/Makefile | 3 +-
> arch/arm/mach-at91/bootm-barebox.c | 3 +-
> arch/arm/mach-at91/ddramc.c | 7 +
> arch/arm/mach-at91/include/mach/barebox-arm.h | 23 +-
> arch/arm/mach-at91/include/mach/cpu.h | 1 -
> arch/arm/mach-at91/include/mach/ddramc.h | 1 +
> .../mach-at91/include/mach/sama5_bootsource.h | 5 +
> arch/arm/mach-at91/sama5_bootsource.c | 36 ++
> arch/arm/mach-at91/sama5d2.c | 15 -
> arch/arm/mach-at91/setup.c | 3 -
> common/Makefile | 2 +-
> drivers/eeprom/at24.c | 2 +
> drivers/i2c/busses/i2c-at91.c | 14 +-
> drivers/net/macb.c | 1 +
> drivers/pinctrl/pinctrl-at91.c | 20 +-
> images/Makefile.at91 | 4 +
> include/deep-probe.h | 7 +
> include/driver.h | 13 +-
> 30 files changed, 572 insertions(+), 48 deletions(-)
> create mode 100644 arch/arm/boards/sama5d4_wifx/Makefile
> create mode 100644 arch/arm/boards/sama5d4_wifx/board.c
> create mode 100644 arch/arm/boards/sama5d4_wifx/lowlevel.c
> create mode 100644 arch/arm/dts/at91-sama5d4_wifx_l1.dts
> create mode 100644 arch/arm/dts/sama5d4.dtsi
> create mode 100644 arch/arm/mach-at91/sama5_bootsource.c
>
> --
> 2.30.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list