[PATCH v2] ARM: i.MX8M: smccc: allow SIP_BUILDINFO call on all imx8m variants
SCHNEIDER Johannes
johannes.schneider at leica-geosystems.com
Wed Jan 11 22:11:15 PST 2023
Hoi,
and "merde", this should have been v3, and misses the changelog...
v2: was:
[PATCH v2 1/1] ARM: i.MX8M: smccc: fix firmware_atf check
v3: redid patch with suggested common config switch
regards
Johannes
________________________________________
From: Johannes Schneider <johannes.schneider at leica-geosystems.com>
Sent: Thursday, January 12, 2023 07:07
To: barebox at lists.infradead.org
Cc: SCHNEIDER Johannes
Subject: [PATCH v2] ARM: i.MX8M: smccc: allow SIP_BUILDINFO call on all imx8m variants
By adding a common config switch, the imx8m_init code becomes generic
for all board variants (and slightly less confusing).
Signed-off-by: Johannes Schneider <johannes.schneider at leica-geosystems.com>
---
arch/arm/mach-imx/imx8m.c | 2 +-
firmware/Kconfig | 4 ++++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/imx8m.c b/arch/arm/mach-imx/imx8m.c
index 9758525b54..4399dc7dd5 100644
--- a/arch/arm/mach-imx/imx8m.c
+++ b/arch/arm/mach-imx/imx8m.c
@@ -61,7 +61,7 @@ static int imx8m_init(const char *cputypestr)
pr_info("%s unique ID: %llx\n", cputypestr, imx8m_uid());
if (IS_ENABLED(CONFIG_ARM_SMCCC) &&
- IS_ENABLED(CONFIG_FIRMWARE_IMX8MQ_ATF)) {
+ IS_ENABLED(CONFIG_FIRMWARE_IMX8M_ATF)) {
arm_smccc_smc(IMX_SIP_BUILDINFO,
IMX_SIP_BUILDINFO_GET_COMMITHASH,
0, 0, 0, 0, 0, 0, &res);
diff --git a/firmware/Kconfig b/firmware/Kconfig
index b4a6fd9137..d3e79b4ef5 100644
--- a/firmware/Kconfig
+++ b/firmware/Kconfig
@@ -14,15 +14,19 @@ config FIRMWARE_IMX_DDR4_PMU_TRAIN
config FIRMWARE_IMX8MM_ATF
bool
+ select FIRMWARE_IMX8M_ATF
config FIRMWARE_IMX8MN_ATF
bool
+ select FIRMWARE_IMX8M_ATF
config FIRMWARE_IMX8MP_ATF
bool
+ select FIRMWARE_IMX8M_ATF
config FIRMWARE_IMX8MQ_ATF
bool
+ select FIRMWARE_IMX8M_ATF
config FIRMWARE_CCBV2_OPTEE
bool
--
2.25.1
More information about the barebox
mailing list