[PATCH 1/2] net: bcmgenet: fix warning when building for 32-bit
Sascha Hauer
sha at pengutronix.de
Wed Jan 11 00:00:48 PST 2023
On Tue, Jan 10, 2023 at 07:01:25PM +0100, Ahmad Fatoum wrote:
> The driver readily works in 32-bit mode as it takes care there
> to write zero to the DMA_DESC_ADDRESS_HI field of descriptors.
> In the receive path, a 32-bit integer is shifted by 32 though
> leading to a (harmless) warning. Adjust the type to silence it.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> ---
> drivers/net/bcmgenet.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/drivers/net/bcmgenet.c b/drivers/net/bcmgenet.c
> index 32ec36eff65a..3ae341a658a0 100644
> --- a/drivers/net/bcmgenet.c
> +++ b/drivers/net/bcmgenet.c
> @@ -314,8 +314,8 @@ static int bcmgenet_gmac_eth_recv(struct eth_device *edev)
> struct bcmgenet_eth_priv *priv = edev->priv;
> void *desc_base = priv->mac_reg + GENET_RX_OFF + priv->rx_index * DMA_DESC_SIZE;
> u32 prod_index = readl(priv->mac_reg + RDMA_PROD_INDEX);
> - u32 length;
> - unsigned long addr_lo, addr_hi, addr;
> + u32 length, addr_lo, addr_hi;
> + dma_addr_t addr;
>
> if (prod_index == priv->c_index)
> return -EAGAIN;
> @@ -324,7 +324,7 @@ static int bcmgenet_gmac_eth_recv(struct eth_device *edev)
> length = (length >> DMA_BUFLENGTH_SHIFT) & DMA_BUFLENGTH_MASK;
> addr_lo = readl(desc_base + DMA_DESC_ADDRESS_LO);
> addr_hi = readl(desc_base + DMA_DESC_ADDRESS_HI);
> - addr = addr_hi << 32 | addr_lo;
> + addr = (u64)addr_hi << 32 | addr_lo;
>
> dma_sync_single_for_cpu(addr, length, DMA_FROM_DEVICE);
>
> --
> 2.30.2
>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list