[PATCH] regulator: scmi: rename struct scmi_regulator::device_node to of_node

[Sascha Hauer]

On Mon, Jan 09, 2023 at 04:19:44PM +0100, Ahmad Fatoum wrote:
> The naming is different than the Linux driver and was only chosen for
> symmetry with device_d::device_node. Now that this is renamed to
> device:of_node, follow suite in the barebox driver.
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
> ---
>  drivers/regulator/scmi-regulator.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/drivers/regulator/scmi-regulator.c b/drivers/regulator/scmi-regulator.c
> index 22813ce66248..2a007ac620a1 100644
> --- a/drivers/regulator/scmi-regulator.c
> +++ b/drivers/regulator/scmi-regulator.c
> @@ -44,7 +44,7 @@ struct scmi_regulator {
>  	struct scmi_device *sdev;
>  	struct scmi_protocol_handle *ph;
>  	struct regulator_dev rdev;
> -	struct device_node *device_node;
> +	struct device_node *of_node;
>  	struct scmi_reg_desc sdesc;
>  };
>  
> @@ -232,7 +232,7 @@ static int scmi_regulator_common_init(struct scmi_regulator *sreg)
>  	 */
>  	if (vinfo->negative_volts_allowed) {
>  		dev_warn(dev, "Negative voltages NOT supported...skip %s\n",
> -			 sreg->device_node->full_name);
> +			 sreg->of_node->full_name);
>  		return -EOPNOTSUPP;
>  	}
>  
> @@ -278,7 +278,7 @@ static int process_scmi_regulator_of_node(struct scmi_device *sdev,
>  	rinfo->sregv[dom]->ph = ph;
>  
>  	/* get hold of good nodes */
> -	rinfo->sregv[dom]->device_node = np;
> +	rinfo->sregv[dom]->of_node = np;
>  
>  	dev_dbg(&sdev->dev,
>  		"Found SCMI Regulator entry -- OF node [%d] -> %s\n",
> -- 
> 2.30.2
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |